Sidebar
docs:guide-user:network:start
Network
Documentation
User guide
Network
- Aliases
- Client Device - Connecting to an existing network
- DHCP configuration
- High availability
- Integrating an OpenWrt network device in your network
- IP rules (policy routing)
- IPv4/IPv6 Transition Technologies
- MAP IPv4-over-IPv6 encapsulation
- MultipathTCP and OpenWrt
- OpenWrt as router device
- Particularities of Single-Port Devices
- Routed Client
- Router vs Switch vs Gateway and why NAT influences this decision
- Routing
- Routing Example: Bridged DMZ
- Routing Example: GRE
- Routing Example: OpenVPN
- Static configuration
- Static Routes
- Tunnelling interface protocols
- UCI networking options cheatsheet
IPv4
IPv6
- 6to4 IPV6 encapsulation example
- How to use OpenWrt behind a Freebox Crystal with IPv6 bridge
- How to use OpenWrt behind a Freebox with IPv6 delegation
- IPv6 DNS
- IPv6 Essentials
- IPv6 ISPs
- IPv6 on softwire
- IPv6 overview
- IPv6 theory
- NAT6 and IPv6 masquerading
- Routing example with IPv6
- Setting up an IPv6 Tunnel with LuCI
- WIDE-DHCPv6 client configuration
Traffic Shaping
- Brain Fuck Scheduler
- CHOKe
- Class Based Queueing
- CoDel
- Deficit Round Robin
- Example1: Traffic Prioritizing with PRIO
- Example2: plain simple bandwidth sharing (aka traffic shaping) with HTB
- Example3: traffic shaping and prioriziting for multiple users with HFSC
- Example4: HFSC + FQ_CODEL + FLOW classifier
- Example5: Traffic Prioritizing with HTB and MAC filtering
- Fair Queue CoDel
- Hierarchical Fair Service Curve
- Hierarchy Token Bucket
- Linux Packet Scheduling
- Netem (Network Emulator)
- QoS (aka Network Traffic Control)
- QoS configuration /etc/config/qos
- Random Early Detection
- SQM (aka Smart Queue Management)
- SQM configuration /etc/config/sqm
- SQM Details
- Stochastic Fairness Queueing
- Token Bucket Filter
VLAN (aka Virtual LAN)
- How to extend the router ports with a managed switch with VLANs
- How-To: Creating an additional virtual switch on a typical home router
- Switch Documentation
- VLAN
WAN (aka Internet access)
- Accessing your modem
- Bridge Mode
- Connect to ISP using L2TP with dual access
- EasyCwmp (CPE WAN Management Protocol daemon)
- How to configure Motorola cable modems (DOCSIS)
- Internet Connection
- IPTV / UDP multicast
- ISP Configurations
- Poor Man's Bridge Mode
- Scripts to get information from modems
- Simple WAN Failover with 3G/LTE WWAN - Using a second router in the same LAN
- Smartphone USB reverse tethering with OpenWrt
- Smartphone USB Tethering to an OpenWrt router
- TR-069 / CWMP
- Using multiple public IPs on wan interface
- Using multiple wan with multiple routers
- WAN interface protocols
- X Play
MultiWAN (aka accessing the internet through more than one modem/device)
- Multiwan
- multiwan: Connection to spare internet provider
- Mwan3 (use multiple WAN connections together)
WWAN aka 3G/4G/LTE and similar
- Dealing with monthly GB quotas
- How To send AT commands to device
- How To use LTE modem in QMI mode for WAN connection
- ModemManager
- USB mode switch
- Use 3g/UMTS USB Dongle for WAN connection
- Use cdc_ether driver based dongles for WAN connection
- Use NCM USB Dongle for WAN connection
- Use RNDIS USB Dongle for WAN connection
Wi-Fi configuration
- Atheros and MAC80211 WDS to implement a wireless network bridge (wireless repeater)
- Bridged AP
- Configure A(ccess) P(oint or 'hotspot') + STA(tion or 'client')
- Configure Wi-Fi encryption
- Connect to client Wi-Fi network
- Country code for Wi-Fi operation
- Exceeding transmit power limits
- FreeRADIUS
- Introduction to 802.1x
- Routed AP
- RSN preauthentication
- Setting up Wi-Fi repeaters with multiple SSIDs
- Table of capabilities for wireless chipsets
- USB 3.0 and Wi-Fi problems
- Wi-Fi /etc/config/wireless
- Wi-Fi extender / repeater / bridge configuration
- Wi-Fi on/off buttons
- Wi-Fi toggle
- Wide area Wi-Fi coverage
- Wireless Access Point / Dumb Access Point / Dumb AP
- Wireless overview
- wpa_supplicant
Guest Wi-Fi network setup
- Configure a guest WLAN
- Configure a guest WLAN on a dumb AP
- Configure a guest WLAN using mainly command line (with sample shell script)
- Configure a guest WLAN using the LuCI web interface
Mesh Wi-Fi
Wi-Fi network tools
Zero configuration network setup
docs/guide-user/network/start.txt · Last modified: 2019/09/08 11:21 by tmomas
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
