Sidebar
docs:guide-user:network:wifi:start
Wi-Fi configuration
Documentation
User guide
Network
Wi-Fi configuration
- Atheros and MAC80211 WDS to implement a wireless network bridge (wireless repeater)
- Bridged AP
- Configure A(ccess) P(oint or 'hotspot') + STA(tion or 'client')
- Configure Wi-Fi encryption
- Connect to client Wi-Fi network
- Country code for Wi-Fi operation
- Dumb AP / Access Point Only
- Exceeding transmit power limits
- FreeRADIUS
- Introduction to 802.1x
- Routed AP
- RSN preauthentication
- Setting up Wi-Fi repeaters with multiple SSIDs
- Table of capabilities for wireless chipsets
- USB 3.0 and Wi-Fi problems
- Wi-Fi /etc/config/wireless
- Wi-Fi extender / repeater / bridge configuration
- Wi-Fi on/off buttons
- Wi-Fi toggle
- Wide area Wi-Fi coverage
- Wireless overview
- wpa_supplicant
Guest Wi-Fi network setup
- Configure a guest WLAN
- Configure a guest WLAN on a dumb AP
- Configure a guest WLAN using mainly command line (with sample shell script)
- Configure a guest WLAN using the LuCI web interface
Mesh Wi-Fi
Wi-Fi network tools
docs/guide-user/network/wifi/start.txt · Last modified: 2019/09/19 09:08 by vgaetera
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
