Techdata: Linksys WAG54G v1.1

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details.

DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported.
See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details.

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Modem
Brand:
Linksys
Model:
WAG54G
Version:
v1.1
Availability:
Discontinued
Supported Since Rel:
10.03
Supported Current Rel:
10.03.1
Unsupported Functions:
DSL modem
Gluon support:
unknown
Target:
brcm63xx
Subtarget:
generic
Package architecture:
mips_mips32
Bootloader:
CFE
CPU:
Broadcom BCM6348
CPU Cores:
1
CPU MHz:
240
Flash MB:
4
RAM MB:
16
Ethernet 100M ports:
¿
Ethernet 1Gbit ports:
¿
Ethernet 2.5Gbit ports:
¿
Ethernet 5Gbit ports:
¿
Ethernet 10Gbit ports:
¿
SFP ports:
¿
SFP+ ports:
¿
Switch:
¿
VLAN:
Yes
Modem:
ADSL
Comments network ports:
4
WLAN Hardware:
Broadcom BCM4318
WLAN 2.4GHz:
b/g
WLAN 5.0GHz:
-
WLAN driver:
b43
Detachable Antennas:
-
Bluetooth:
¿
miniPCI ports:
¿
USB ports:
-
SATA ports:
-
Video ports:
¿
Audio ports:
¿
Phone ports:
¿
Serial:
Yes
Serial connection parameters:
¿
Serial connection voltage:
¿
JTAG:
Yes
LED count:
¿
Button count:
¿
GPIOs:
¿
Power Supply:
¿
OpenVPN performance:
¿
Wireguard performance:
¿
Device Page:
wag54g
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/backfire/10.03.1/brcm63xx/openwrt-96348GW-generic-squashfs-cfe.bin
Installation method(s):
CFE TFTP + serial recovery, see devicepage
Recovery method(s):
CFE TFTP + serial recovery
Picture:
picture: genericrouter1.png
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2023/03/06 19:47
  • by 127.0.0.1