Table of Hardware: Image too big to save overlay / save settings
Purpose: This ToH version shows devices which match the following criteria:
- Image too big != “” (not empty)
Reasons:
- Collect all devices which are no longer working with latest OpenWrt due to insufficient flash space.
Devices shown here have insufficient flash space, and due to this, are unable to save settings after a fresh OpenWrt installation. - Collect devices where the image build process has been disabled, since the image grew too large.
See also the following OpenWrt forum topics:
See also the following git commits:
Image too big per release:
- -(37)
- 17.01.0(1)
- 17.01.1(1)
- 17.01.4(1)
- 18.06.0(24)
- 18.06.4(1)
- 18.06.5(1)
- 18.06.6(1)
- 18.06.7(1)
- 18.06.8(1)
- 19.07.0(4)
- 19.07.2(3)
- 19.07.4(1)
- 21.02.0(1)
- 22.03.1(2)
- PR pending(2)
- external image(1)
- snapshot(60)
- ¿(1)
| # | Brand | Model | Version | Flash MB | RAM MB | Device Page | Device Techdata | Supported Current Rel | Image too big | OWrt Forum Topic URL | Comments |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7Links | PX-4885 | 4, 8 | 32 | px4885 | View/Edit data | 19.07.2 | snapshot | 4M Image build disabled in master with commit d7d46da938e3 | ||
| 2 | Airlink101 | AR725W | 4 | 32 | ar725w | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 3 | Airlink101 | AR670W | 4 | 32 | ar670w | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 4 | AirLive | AIR3GII | 4 | 32 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | |||
| 5 | ALLNET | ALL0256N | 4, 8 | 32 | all0256n | View/Edit data | 19.07.2 | snapshot | 4M Image build disabled in master with commit d7d46da938e3 | ||
| 6 | Arcadyan | WE420223-99 | 32 | 128 | we420223-99 | View/Edit data | snapshot | - | https://forum.openwrt.org/t/adding-openwrt-support-for-arcadyan-we420223-99-kpn-experia-wifi/132653 | Sold by KPN in the Netherlands as Experia WiFi | |
| 7 | AsiaRF | AP7621-IL1 | 1 | 16 | 512 | View/Edit data | snapshot | 18.06.4, 18.06.5, 18.06.6, 18.06.7, 19.07.0 | |||
| 8 | AsiaRF | AWM002 | 16 | 32 | awm-evb | View/Edit data | 19.07.2 | snapshot | 4M Image build disabled in master with commit d7d46da938e3 | ||
| 9 | AsiaRF | AWAPN2403 | 4 | 32 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | |||
| 10 | ASUS | RT-N10+ | B1 | 4 | 32 | rt-n10plus | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas, https://forum.openwrt.org/viewtopic.php?pid=153470 | ASUS RT-N10P != ASUS RT-N10+ / ASUS RT-N10plus; Image build disabled in master with commit d7d46da938e3 |
| 11 | ASUS | RT-G32 | B1 | 4 | 16 | rt-g32 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | |
| 12 | ASUS | RT-N15 | 4 | 32 | rt-n15 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 13 | ASUS | WL-330N3G | 4 | 32 | wl-330n3g | View/Edit data | 19.07.2 | snapshot | Needs USB 3G modem for 3G (no built-in 3G hardware); Image build disabled in master with commit d7d46da938e3 | ||
| 14 | ASUS | WL-330N | A | 4 | 16 | wl-330n | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | |
| 15 | Beeline | Smartbox GIGA | 128NAND | 256 | smartbox_giga | View/Edit data | snapshot | - | https://forum.openwrt.org/t/add-support-for-beeline-smartbox-giga/99390 | ||
| 16 | Beeline | SmartBox TURBO+ | 128 | 128 | smartbox_turbo_plus | View/Edit data | snapshot | - | https://forum.openwrt.org/t/add-support-for-beeline-smartbox-turbo/99635 | ZigBee (EFR32 MG1B232GG) | |
| 17 | Buffalo | WHR-G300N | v2 | 4 | 32 | whr-g300nv2 | View/Edit data | 19.07.2 | 19.07.2 | ||
| 18 | Buffalo | WHR-G300N | v1 | 4 | 32 | whr-g300nv1 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | |
| 19 | Buffalo | WLI-TX4-AG300N | v1 | 4 | 32 | wli-tx4-ag300n | View/Edit data | 19.07.2 | snapshot | Images are currently broken! See https://dev.openwrt.org/ticket/22318; Image build disabled in master with commit d7d46da938e3 | |
| 20 | Buffalo | WZR-AGL300NH | V01 | 4 | 32 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 21 | Cisco | Valet M10 | v1.0 | 4 | 32 | m10 | View/Edit data | 17.01.5 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | Reported not working with 17.01.6 and 18.06.1, hence being stuck at 17.01.5, see forum |
| 22 | Cisco | Valet M10 | v2.0 | 4 | 32 | m10 | View/Edit data | 17.01.5 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | Same hardware as Linksys E1000 v2; Stuck at 17.01.5 due to low flash |
| 23 | CreatComm | TA8K | 32 | 256 | View/Edit data | external image | snapshot | ||||
| 24 | CreatComm | TB2I | 8 | 64 | View/Edit data | external image | snapshot | ||||
| 25 | Ctera | C200 | V2 | 256NAND | 1024 | View/Edit data | 22.03.5 | - | |||
| 26 | D-Link | DAP-1522 | A1 | 4 | 32 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 27 | D-Link | DCS-930L/DCS-932L | B1 | 4 | 32 | dcs-930l | View/Edit data | 18.06.8 | snapshot | https://forum.openwrt.org/t/support-for-the-d-link-dcs-930l-webcam/89212?u=tmomas | sysupgrade not built for 18.06.4; factory not built for snapshots (July 2019); Image build disabled in master with commit d7d46da938e3 |
| 28 | D-Link | DCS-930L/DCS-932L | A1 | 4 | 32 | dcs-930l | View/Edit data | 18.06.8 | snapshot | https://forum.openwrt.org/t/support-for-the-d-link-dcs-930l-webcam/89212?u=tmomas | sysupgrade not built for 18.06.4; factory not built for snapshots (July 2019); Image build disabled in master with commit d7d46da938e3 |
| 29 | D-Link | DIR-300 | B1, B2, B3 | 4 | 32 | dir-300revb | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | Image build disabled in master with commit d7d46da938e3 |
| 30 | D-Link | DIR-300 | B5, B6, B7 | 4 | 32 | dir-300revb | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas, https://forum.openwrt.org/viewtopic.php?id=50929 | |
| 31 | D-Link | DIR-600 | B2 | 4 | 32 | dir-300revb | View/Edit data | 18.06.7 | 18.06.8, 19.07.0 | https://forum.openwrt.org/t/loss-of-settings-after-reboot-d-link-dir-600-hw-b2/53876?u=tmomas | The official firmware appears to differ in certain countries; Image build disabled in master with commit d7d46da938e3 |
| 32 | D-Link | DIR-610 | A1 | 4 | 32 | dir-610_a1 | View/Edit data | 19.07.2 | snapshot | https://forum.openwrt.org/t/how-to-install-openwrt-in-dir-610-a1/32839 | Image build disabled in master with commit d7d46da938e3 |
| 33 | D-Link | DIR-615 | D1 | 4 | 32 | dir-615 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | Image build disabled in master with commit d7d46da938e3 |
| 34 | D-Link | DIR-615 | D2, D3, D4, D5 | 4 | 32 | dir-615 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | Image build disabled in master with commit d7d46da938e3 |
| 35 | D-Link | DIR-615 | H1 | 4 | 32 | dir-615 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | Image build disabled in master with commit d7d46da938e3 |
| 36 | D-Link | DSL-2740B/1B | C2 | 4 | 32 | dsl-2740b | View/Edit data | 19.07.2 | snapshot | https://forum.openwrt.org/viewtopic.php?id=40659 | Image build disabled in master with commit 4e535d81ee95 |
| 37 | D-Link | DSL-2740B/1B | C3 | 4 | 32 | dsl-2740b | View/Edit data | 19.07.2 | snapshot | https://forum.openwrt.org/viewtopic.php?id=40659 | Image build disabled in master with commit 4e535d81ee95 |
| 38 | Edimax | 3g-6200n | 4 | 32 | 3g-6200n | View/Edit data | 17.01.7 | 18.06.0, 19.07.0, snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 39 | Edimax | 3G-6200nL | 4 | 16 | 3g-6200n | View/Edit data | 18.06.8 | snapshot | |||
| 40 | EnGenius | ESR-9753 | 4 | 32 | esr9753 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040/137?u=tmomas | Image build disabled in master with commit d7d46da938e3 | |
| 41 | Etisalat | S3 | 128NAND | 256 | s3 | View/Edit data | snapshot | - | https://forum.openwrt.org/t/openwrt-for-sercomm-model-s3/147649 | ||
| 42 | Evaluation boards / unbranded boards | A5-V11 | 4 | 32 | a5-v11 | View/Edit data | 18.06.9 | 18.06.0, 19.07.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | LY OEM; Image build disabled in master with commit d7d46da938e3 | |
| 43 | Evaluation boards / unbranded boards | WR512 3GN | 4, 8 | 32 | View/Edit data | 18.06.1 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | aka "Sin Hon SH-WR512NU" or "WS-WR512N1"; 4M Image build disabled in master with commit d7d46da938e3 | ||
| 44 | Evaluation boards / unbranded boards | XDX-RN502J | 4 | 32 | sl-r7205 | View/Edit data | 19.07.2 | 19.07.2, snapshot | https://forum.openwrt.org/viewtopic.php?id=34878 | Image build disabled in master with commit d7d46da938e3 | |
| 45 | Evaluation boards / unbranded boards | Ralink V11ST-FE | 4 | 32 | v11st-fe | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 46 | FriendlyARM | NanoPi R4S | microSD, microSDHC, microSDXC | 4096 | nanopi_r4s_v1 | View/Edit data | 22.03.5 | - | https://forum.openwrt.org/t/nanopi-r4s-rk3399-4g-is-a-great-new-openwrt-device/79143 | 1GB DDR3 and 4GB LPDDR4 versions are available | |
| 47 | FriendlyARM | NanoPi R5S | microSD, microSDHC, microSDXC, more than 8GB eMMC | 4096 | nanopi_r5s | View/Edit data | external image | - | FriendlyElec posts frequent builds of their FriendlyWrt distro based on OpenWrt 22.03 branch | ||
| 48 | FriendlyARM | NanoPi R6S | microSD, microSDHC, microSDXC, more than 8GB eMMC | 8192 | View/Edit data | external image | - | https://forum.openwrt.org/t/nanopi-r6s-a-rockchip-rk3588s-router/141059 | FriendlyElec posts frequent builds of their FriendlyWrt distro based on OpenWrt 22.03 branch | ||
| 49 | GL.iNet | GL-E750 | v1 | 128NAND | 128 | gl-e750 | View/Edit data | 22.03.5 | - | This product can support CAT4 or CAT6 4G LTE module | |
| 50 | GL.iNet | GL-B2200 | 16, 8192 eMMC | 512 | gl-b2200 | View/Edit data | 22.03.5 | - | Has Zigbee on board | ||
| 51 | HAME | MPR-A1 | 4 | 16 | mpr-a1 | View/Edit data | 19.07.2 | snapshot | https://forum.openwrt.org/viewtopic.php?id=37002 | Image build disabled in master with commit d7d46da938e3 | |
| 52 | Hi-Link | HLK-RM04 | v2 | 8 | 32 | hlk-rm04 | View/Edit data | 19.07.2 | snapshot | https://forum.openwrt.org/viewtopic.php?id=42142 | Image build disabled in master with commit d7d46da938e3 |
| 53 | Hi-Link | HLK-RM04 | v1 | 4 | 16 | hlk-rm04 | View/Edit data | 19.07.2 | snapshot | https://forum.openwrt.org/viewtopic.php?id=42142 | Image build disabled in master with commit d7d46da938e3 |
| 54 | Huawei | HG520v | 4 | 32 | hg520v | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit 4e535d81ee95 | ||
| 55 | Itus Networks | Shield | 4096 eMMC, SDHC | 1024 | itus_networks_shield | View/Edit data | 22.03.2 | - | |||
| 56 | JCG | JHR-N926R | 4 | 32 | jhr-n926r | View/Edit data | 19.07.2 | snapshot | 2 digit 7-segment LED display, connected through two daisy-chained 74164 shift registers that are controlled by 3 GPIOs (data, clock, blank); Image build disabled in master with commit d7d46da938e3 | ||
| 57 | JCG | JHR-N825R | 4 | 32 | jhr-n825r | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 58 | JCG | JHR-N805R | 4 | 16 | jhr-n805r | View/Edit data | 19.07.2 | snapshot | https://forum.freifunk.net/t/openwrt-auf-jhr-n805r | Image build disabled in master with commit d7d46da938e3 | |
| 59 | Linksys | E1000 | v1 | 4 | 32 | e1000 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas, https://forum.openwrt.org/viewtopic.php?pid=179199 | |
| 60 | Linksys | E8450 | 128NAND | 512 | e8450 | View/Edit data | 22.03.5 | - | https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-wifi-ax-discussion/94302 | ||
| 61 | Linksys | EA6350 | v3 (civic) | 128NAND | 256 | ea6350_v3 | View/Edit data | 22.03.2 | snapshot | Snapshot image build disabled due to too big kernel size, see f0ea3df439c796dc6d4e; For switching back to the original firmware, you can use the TFTP + Serial method or use the generic "MTD write" method. | |
| 62 | Linksys | EA8300 | v1 | 256NAND | 256 | ea8300 | View/Edit data | 22.03.2 | snapshot | Snapshot image build disabled due to too big kernel size, see f0ea3df439c796dc6d4e | |
| 63 | Linksys | MR8300 | v1, v1.1 | 256NAND | 512 | mr8300 | View/Edit data | 22.03.5 | - | snapshot and 23.05+ need a boot variable change before installation. Read doc. | |
| 64 | Linksys | WRT160N | v3 | 4 | 32 | wrt160n | View/Edit data | 17.01.7 | 18.06.0 | ||
| 65 | Linksys | WHW03 | V2 | 512 | 512 | whw03_v2 | View/Edit data | snapshot | snapshot | ||
| 66 | MikroTik | RBSXTsqG-5acD (SXTsq 5 ac) | 16 | 256 | lhg5_ac_board_based_devices | View/Edit data | 22.03.5 | - | |||
| 67 | MikroTik | RBSXTsq2nD (SXTsq Lite2) | 16 | 64 | lhg-hb_platform | View/Edit data | PR pending | - | http://forum.openwrt.org/t/support-for-rbsxtsq2nd-sxtsq-lite2/27132/ | GPIO16 is shared by the rssihigh LED and the reset button | |
| 68 | MikroTik | RBwAPG-5HacD2HnD (wAP ac) | 16 | 128 | wap_ac_rbwapg-5hacd2hnd | View/Edit data | snapshot | - | https://forum.openwrt.org/t/new-wap-ac-rbwapg-5hacd2hnd/93532 | ||
| 69 | MikroTik | RB5009UG+S+IN | 1024NAND, 16 | 1024 | rb5009ug_s_in | View/Edit data | external image | - | https://forum.openwrt.org/t/add-support-for-mikrotik-rb5009ug/104391/ | See https://github.com/adron-s/openwrt-rb5009#readme | |
| 70 | NETGEAR | EX2700 | 4 | 32 | ex2700 | View/Edit data | 18.06.9 | snapshot | https://forum.openwrt.org/t/builds-for-netgear-wnr1000v2-wnr1000v2-vc-wnr612v2-wpn824n-wnr2000v3-ex2700/39360/1 | Community Builds available for 19.07.10. Stock firmware is a fork of OpenWrt (Kamikaze); image generation disabled in master with ef3c71464a5e | |
| 71 | NETGEAR | WN3000RP | v1 | 4 | 32 | wn3000rp_v1 | View/Edit data | external image | 17.01.1 | http://forum.openwrt.org/t/installation-of-19-07-2-on-wn3000rp/60577, http://forum.openwrt.org/t/netgear-wn3000rp-v1-low-cost-repeater-failsafe/1310 | Flash from Netgear GUI is limited to images <3.0MB. Larger images can be flashed once OpenWrt is installed. |
| 72 | NETGEAR | GS108T | v3 | 32 | 128 | gs108t_v3 | View/Edit data | 22.03.0 | external image | Ethernet LEDs do not work on OpenWrt | |
| 73 | NETGEAR | JWNR2010 | v5 | 4 | 32 | View/Edit data | snapshot | snapshot | |||
| 74 | NETGEAR | WNCE2001 | 4 | 32 | wnce2001 | View/Edit data | 19.07.2 | snapshot | Image build deactivated in master with f46a3c7b14e6 due to image too big. | ||
| 75 | NETGEAR | WNR2000 | v4 | 4 | 32 | wnr2000 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas, https://forum.openwrt.org/viewtopic.php?id=50478 | |
| 76 | NETGEAR | WPN824N NA | 4 | 32 | wpn824n | View/Edit data | 18.06.9 | 17.01.0 | https://forum.openwrt.org/t/builds-for-netgear-wnr1000v2-wnr1000v2-vc-wnr612v2-wpn824n-wnr2000v3/39360 | US version of WPN824N. Official images are too large as of 17.XX. Use the Community Builds in the forum topic URL above for the latest 17.XX, 18.XX, and 19.XX images. | |
| 77 | NETGEAR | WNR1000 | v2-VC | 4 | 32 | wnr1000_v2 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas, https://forum.openwrt.org/t/wnr1000v2-builds-for-netgear/39360 | Hardwarewise identical to WNR1000v2 |
| 78 | NETGEAR | WNR1000 | v2 | 4 | 32 | wnr1000_v2 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas, https://forum.openwrt.org/t/wnr1000v2-builds-for-netgear/39360 | |
| 79 | NETGEAR | R7200 | v1 | 128NAND | 256 | r7200_v1 | View/Edit data | 22.03.5 | - | Clone of Netgear R6700v2 | |
| 80 | NETGEAR | XR500 | 256NAND | 512 | View/Edit data | 22.03.5 | - | https://forum.openwrt.org/t/ipq806x-nss-build-netgear-r7800-tp-link-c2600-linksys-ea8500/ | Hardware is similar to R7800 | ||
| 81 | NETGEAR | WAX202 | 128 | 512 | wax202 | View/Edit data | 22.03.5 | - | https://forum.openwrt.org/t/netgear-wax202-wifi-6-30-at-amazon/130029/ | ||
| 82 | Nexx | WT3020A | 4 | 64 | wt3020 | View/Edit data | 18.06.8 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 83 | Nexx | WT1520H | 4 | 32 | wt1520 | View/Edit data | 19.07.2 | snapshot | https://forum.openwrt.org/viewtopic.php?id=48481 | Image build disabled in master with commit d7d46da938e3 | |
| 84 | On Networks | N150R | 4 | 32 | wnr612v2 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | ||
| 85 | PC Engines | APU4D4 | SDHC | 4096 | apu4 | View/Edit data | 22.03.5 | - | |||
| 86 | Petatel | PSR-680W | 4 | 32 | psr-680w | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 87 | Pine64 | RockPro64 | 2.1 | 16, eMMC, microSD | 4096 | rockpro64_v2.1 | View/Edit data | 22.03.5 | - | ||
| 88 | Planex | MZK-DP150N | 4 | 32 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | |||
| 89 | Planex | MZK-W300NH2 | 4 | 16 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | |||
| 90 | Poray | M3 | 4 | 32 | m3 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 91 | Shuttle | OMNINAS KD20 | 128NAND | 256 | kd20 | View/Edit data | 19.07.7 | 17.01.4 | https://forum.openwrt.org/t/install-openwrt-on-shuttle-omninas-kd20/70465?u=tmomas | GPL sources: http://data.shuttle.eu/~upload/omninas/KD20_20121127.zip; Factory image build disabled with commit b0b7f2b8f3a6bba4 | |
| 92 | Sinovoip | Banana Pi BPi-R64 | V1.1, V1.2 | 8192 eMMC | 1024 | bananapi_bpi-r64_v1.1 | View/Edit data | 22.03.0 | - | ||
| 93 | Sinovoip | BananaPi BPi R3 | V1.0, V1.1 | 128NAND, 32, 8192 eMMC, microSD | 2048 | bananapi_bpi_r3_v1.0_v1.1 | View/Edit data | snapshot | - | ||
| 94 | Sitecom | WL-351 | v1 002 | 4 | 32 | wl-351 | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas, https://forum.openwrt.org/viewtopic.php?id=40150 | |
| 95 | Skyline | SL-R7205 | 4 | 32 | sl-r7205 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 96 | Sparklan | WCR-150GN | 4 | 16 | wcr-150gn | View/Edit data | 19.07.2 | snapshot | https://forum.openwrt.org/viewtopic.php?id=41653 | Image build disabled in master with commit d7d46da938e3 | |
| 97 | Tecom | GW6200 | 8 | 64 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit 4e535d81ee95 | |||
| 98 | Tecom | GW6000 | 4 | 32 | gw6000 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit 4e535d81ee95 | ||
| 99 | Teltonika | RUTX11 | 16, 256NAND | 256 | View/Edit data | snapshot | ¿ | ||||
| 100 | Tenbay - KuWfi | T-MB5EU | v01 | 16 | 256 | View/Edit data | 22.03.4 | - | aka "KuWFI AX1800 Smart WiFi 6 Router" | ||
| 101 | Tenda | 3G150B | 4 | 32 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | |||
| 102 | Tenda | 3G300M | 4 | 32 | View/Edit data | 18.06.1 | snapshot | Image build disabled in master with commit d7d46da938e3 | |||
| 103 | Tenda | W306R | v2.0 | 4 | 32 | w306r | View/Edit data | 19.07.10 | snapshot | Image build disabled in master with commit d7d46da938e3 | |
| 104 | TP-Link | TL-MR3420 | v3 | 4 | 32 | tl-mr3420 | View/Edit data | snapshot | snapshot | No factory/sysupgrade images available, only initramfs. | |
| 105 | TP-Link | TL-WA750RE | v1 | 4 | 32 | tl-wa850re | View/Edit data | 18.06.9 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas, https://forum.openwrt.org/viewtopic.php?id=46859 | |
| 106 | TP-Link | TL-WA850RE | v2 | 4 | 32 | tl-wa850re | View/Edit data | 18.06.9 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | |
| 107 | TP-Link | TL-WA855RE | v1 | 4 | 32 | View/Edit data | 18.06.4 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | ||
| 108 | TP-Link | TL-WPA8630P | v2.0 (AU), v2.0 (DE), v2.1 (AU) | 8 | 128 | tl-wpa8630p_v2 | View/Edit data | 21.02.5 | 22.03.1 | P versions have a power socket. P and not-P, v1 and v2 all have different firmware layouts. Pv2 variant is available in Europe but not the Americas. | |
| 109 | TP-Link | TL-WPA8630P | v2.1 (EU) | 8 | 128 | tl-wpa8630p_v2 | View/Edit data | 21.02.5 | 22.03.1 | P versions have a power socket. P and not-P, v1 and v2 all have different firmware layouts. Pv2 variant is available in Europe but not the Americas. | |
| 110 | TP-Link | TL-WR840N | v5 | 4 | 64 | View/Edit data | 18.06.4 | 18.06.0 | https://forum.openwrt.org/t/report-devices-here-with-18-06-0-provided-image-too-big-to-save-overlay/18161/72?u=tmomas | Image build disabled in master with commit d7d46da938e3 | |
| 111 | TP-Link | TL-WR841N/ND | v8 | 4 | 32 | tl-wr841nd | View/Edit data | 17.01.7 | 18.06.0 | https://forum.openwrt.org/viewtopic.php?id=37010 | |
| 112 | TP-Link | TL-WR841N/ND | v9 | 4 | 32 | tl-wr841nd | View/Edit data | 18.06.9 | 19.07.2 | https://forum.openwrt.org/viewtopic.php?id=48355 | |
| 113 | TP-Link | TL-WR841N | v14 | 4 | 32 | tl-wr841nd | View/Edit data | snapshot | snapshot | Image build disabled in master with commit d7d46da938e3 | |
| 114 | TP-Link | EAP235-Wall | v1 | 16 | 128 | eap235-wall_v1 | View/Edit data | 21.02.6 | - | https://forum.openwrt.org/t/adding-support-for-eap235-wall/86280/ | Comes in EU and US versions, but differences are probably software rather than hardware. |
| 115 | TP-Link | OnHub TGR1900 | 4096 eMMC | 1024 | onhub_tp-link_tgr1900 | View/Edit data | snapshot | - | https://forum.openwrt.org/t/onhub-tp-link-tgr1900-future-support/17899 | Bluetooth 4.0, ZigBee, Speaker | |
| 116 | TRENDnet | TEW-638APB | v2 | 4 | 32 | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 117 | Ubiquiti | UniFi 6 LR | v1 | 64 | 512 | unifi_6_lr | View/Edit data | 22.03.5 | - | Appears to have 2.5 GBps capable PHY. V2 only differs in status LED. V3 has 1GBps-only Ethernet PHY. V1+V2+V3 use the same Unifi firmware, but (currently) require different OpenWRT firmwares. | |
| 118 | Ubiquiti | UniFi 6 LR | v2 | 64 | 512 | unifi_6_lr | View/Edit data | 22.03.5 | - | Replaced by similar v3 in ~August 2022. v3 has 1GBps (instead of 2.5 GBps) PHY. | |
| 119 | Ubiquiti | Rocket M2 | XM | 8 | 64 | nanostationm2 | View/Edit data | 22.03.5 | - | second device page: https://openwrt.org/toh/ubiquiti/airmaxm | |
| 120 | UniElec | U7623 | 8192 eMMC | 512 | u7623 | View/Edit data | 21.02.6 | - | Device can use a fairly versatile range of vendor-provided and third party wi-fi cards. | ||
| 121 | Upvel | UR-326N4G | 4 | 32 | ur-326n4g | View/Edit data | 19.07.2 | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 122 | VONETS | VAR11N-300 | 4 | 32 | View/Edit data | 19.07.8 | 21.02.0 | Image build disabled in master with commit d7d46da938e3 | |||
| 123 | Widemac | SL-R7205 | 4 | 32 | sl-r7205 | View/Edit data | 19.07.2 | snapshot | The device is sometimes also referred to as XDX-RN502J; Image build disabled in master with commit d7d46da938e3 | ||
| 124 | WiFire | S1500.NBN | 128 | 128 | s1500_nbn | View/Edit data | snapshot | - | https://forum.openwrt.org/t/adding-support-for-sercomm-s1500-clones-beeline-smartbox-pro-wifire-s1500-nbn/110065 | ||
| 125 | Xiaomi | Redmi AX6000 | 128 | 512 | redmi_ax6000 | View/Edit data | snapshot | - | https://forum.openwrt.org/t/add-openwrt-support-for-xiaomi-redmi-ax6000/125008 | ||
| 126 | Xiaomi | Mi WiFi Range Extender AC1200 RA75 | 16 | 64 | mi_wifi_range_extender_ac1200_model_ra75 | View/Edit data | snapshot | - | https://forum.openwrt.org/t/almost-supported-xiaomi-ra75-aka-miwifi-range-extender-ac1200/134855 | Works with Firmware for mi_router_4a_mir4a_100m, but ethernet will be WAN port and inaccessible | |
| 127 | Xiaomi | Mi AIoT Router AX3600 | 256 | 512 | ax3600 | View/Edit data | snapshot | - | https://forum.openwrt.org/t/adding-openwrt-support-for-xiaomi-ax3600/55049 | ||
| 128 | Xiaomi | Redmi AX6 | 128 | 512 | xiaomi_redmi_ax6_ax3000 | View/Edit data | snapshot | - | https://forum.openwrt.org/t/add-support-for-redmi-ax6-ax3000-wi-fi-6-mesh-router/ | ||
| 129 | Xunlong | Orange Pi R1 Plus | microSDHC | 1024 | orange_pi_r1_plus | View/Edit data | ¿ | PR pending | https://forum.openwrt.org/t/orange-pi-r1-plus-support/84824/92 | 5V Fan interface x1, PR: https://github.com/openwrt/openwrt/pull/4093 | |
| 130 | ZyXEL | Keenetic Start | 4 | 32 | keenetic-start | View/Edit data | snapshot | snapshot | Image build disabled in master with commit d7d46da938e3 | ||
| 131 | ZyXEL | NBG-419N | v1 | 4 | 32 | nbg419n | View/Edit data | 19.07.7 | 19.07.4 | Image build disabled in master with commit d7d46da938e3; Flash size wrongly indicated as 16MB (is only 4 MB) in 19.07.4 | |
| 132 | ZyXEL | NBG6515 | 8 | 64 | nbg6515_ac750 | View/Edit data | PR pending | PR pending | https://forum.openwrt.org/t/new-support-for-nbg6515-overlayfs-problem/73620?u=tmomas | WLAN requires some data extracted from stock firmware *before* flashing; instructions on project page. | |
| 133 | ZyXEL | LTE3301-PLUS | 128NAND | 256 | View/Edit data | snapshot | snapshot | ||||
| 134 | ZyXEL | EX5601-T0 | 512NAND | 1024 | View/Edit data | snapshot | - | https://forum.openwrt.org/t/adding-openwrt-support-for-zyxel-ex5601-t0/155914 | https://hack-gpon.github.io/zyxel/ |