CloudEngines Pogoplug V4

0:rootfs ubi.mtd=4,2048 rootfstype=ubifs [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 118356KB available (3852K code, 261K data, 124K init, 0K highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:128 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696) [ 0.230000] Mount-cache hash table entries: 512 [ 0.230000] CPU: Testing write buffer coherency: ok [ 0.230000] NET: Registered protocol family 16 [ 0.230000] Feroceon L2: Enabling L2 [ 0.230000] Feroceon L2: Cache support initialised. [ 0.230000] [ 0.230000] CPU Interface [ 0.230000] ------------- [ 0.230000] SDRAM_CS0 ....base 00000000, size 128MB [ 0.230000] SDRAM_CS1 ....disable [ 0.230000] SDRAM_CS2 ....disable [ 0.230000] SDRAM_CS3 ....disable [ 0.230000] PEX0_MEM ....base e0000000, size 128MB [ 0.230000] PEX0_IO ....base f2000000, size 1MB [ 0.230000] PEX1_MEM ....no such [ 0.230000] PEX1_IO ....no such [ 0.230000] INTER_REGS ....base f1000000, size 1MB [ 0.230000] NFLASH_CS ....base fa000000, size 2MB [ 0.230000] SPI_CS ....base f4000000, size 16MB [ 0.230000] BOOT_ROM_CS ....no such [ 0.230000] DEV_BOOTCS ....no such [ 0.230000] CRYPT_ENG ....base f0000000, size 2MB [ 0.230000] [ 0.230000] Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)-- RD-88F6192A-NAS Soc: 88F6192 A1 LE [ 0.230000] [ 0.230000] Detected Tclk 166666667 and SysClk 200000000 [ 0.230000] Marvell USB EHCI Host controller #0: c403e740 [ 0.730000] PEX0 interface detected Link X1 [ 0.730000] pci 0000:00:01.0: reg 10 64bit mmio: [0x40000000-0x4000ffff] [ 0.730000] pci 0000:00:01.0: reg 18 64bit mmio: [0x40010000-0x40010fff] [ 0.730000] pci 0000:00:01.0: reg 20 64bit mmio: [0x40011000-0x40011fff] [ 0.740000] pci 0000:00:01.0: supports D1 [ 0.740000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 0.740000] pci 0000:00:01.0: PME# disabled [ 0.740000] PCI: bus0: Fast back to back transfers disabled [ 0.740000] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1 [ 0.750000] bio: create slab at 0 [ 0.750000] SCSI subsystem initialized [ 0.750000] usbcore: registered new interface driver usbfs [ 0.750000] usbcore: registered new interface driver hub [ 0.750000] usbcore: registered new device driver usb [ 0.750000] NET: Registered protocol family 2 [ 0.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.750000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.750000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.750000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.750000] TCP reno registered [ 0.750000] NET: Registered protocol family 1 [ 0.750000] cpufreq: Init kirkwood cpufreq driver [ 0.750000] cpufreq: High frequency: 800000KHz - Low frequency: 200000KHz [ 0.750000] cpufreq: Setting CPU Frequency to 800000 KHz [ 0.750000] cpufreq: Setting PowerSaveState to off [ 0.760000] XOR registered 4 channels [ 0.760000] XOR 2nd invalidate WA enabled [ 0.760000] cesadev_init(c000d7fc) [ 0.760000] mvCesaInit: sessions=640, queue=64, pSram=f0000000 [ 0.760000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.770000] msgmni has been set to 231 [ 0.770000] alg: No test for cipher_null (cipher_null-generic) [ 0.770000] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.770000] alg: No test for digest_null (digest_null-generic) [ 0.770000] alg: No test for compress_null (compress_null-generic) [ 0.780000] alg: No test for stdrng (krng) [ 0.780000] alg: No test for hmac(digest_null) (hmac(digest_null-generic)) [ 0.790000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.790000] io scheduler noop registered [ 0.790000] io scheduler anticipatory registered (default) [ 0.790000] Initializing ths8200_init [ 0.790000] Initializing dove_adi9889_init [ 0.810000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.810000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.810000] console [ttyS0] enabled [ 0.820000] Integrated Sata device found [ 0.830000] IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs [ 0.850000] scsi0 : Marvell SCSI to SATA adapter [ 0.860000] scsi1 : Marvell SCSI to SATA adapter [ 0.870000] Loading Marvell Ethernet Driver: [ 0.870000] o Cached descriptors in DRAM [ 0.880000] o DRAM SW cache-coherency [ 0.880000] o 1 Giga ports supported [ 0.880000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 0.890000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 0.890000] o TCP segmentation offload (TSO) supported [ 0.900000] o Large Receive offload (LRO) supported [ 0.900000] o Receive checksum offload supported [ 0.910000] o Transmit checksum offload supported [ 0.910000] o Network Fast Processing (Routing) supported - (Disabled) [ 0.920000] o Driver ERROR statistics enabled [ 0.930000] o Proc tool API enabled [ 0.930000] o SKB Reuse supported - (Disabled) [ 0.930000] o SKB Recycle supported - (Disabled) [ 0.940000] o Rx descripors: q0=128 [ 0.940000] o Tx descripors: q0=532 [ 0.950000] o Loading network interface(s): [ 0.950000] o register under mv88fx_eth platform [ 0.960000] o eth0, ifindex = 2, GbE port = 0 [ 0.960000] [ 0.960000] mvFpRuleDb (c45b2000): 1024 entries, 4096 bytes [ 0.970000] Counter=0, opIdx=6, overhead=16 [ 0.970000] Counter=1, opIdx=2, overhead=0 [ 0.980000] Counter=2, opIdx=1, overhead=18 [ 0.980000] Counter=3, opIdx=2, overhead=0 [ 0.990000] tun: Universal TUN/TAP device driver, 1.6 [ 0.990000] tun: (C) 1999-2004 Max Krasnyansky [ 1.000000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit) [ 1.010000] Scanning device for bad blocks [ 1.060000] Using static partition definition [ 1.060000] Creating 5 MTD partitions on "nand_mtd": [ 1.070000] 0x000000000000-0x000000200000 : "u-boot" [ 1.070000] 0x000000200000-0x000000500000 : "uImage" [ 1.080000] 0x000000500000-0x000000800000 : "uImage2" [ 1.080000] 0x000000800000-0x000001000000 : "failsafe" [ 1.090000] 0x000001000000-0x000008000000 : "root" [ 1.100000] UBI: attaching mtd4 to ubi0 [ 1.100000] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 1.110000] UBI: logical eraseblock size: 126976 bytes [ 1.110000] UBI: smallest flash I/O unit: 2048 [ 1.120000] UBI: sub-page size: 512 [ 1.120000] UBI: VID header offset: 2048 (aligned 2048) [ 1.130000] UBI: data offset: 4096 [ 1.350000] UBI: attached mtd4 to ubi0 [ 1.350000] UBI: MTD device name: "root" [ 1.360000] UBI: MTD device size: 112 MiB [ 1.360000] UBI: number of good PEBs: 896 [ 1.370000] UBI: number of bad PEBs: 0 [ 1.370000] UBI: max. allowed volumes: 128 [ 1.380000] UBI: wear-leveling threshold: 4096 [ 1.380000] UBI: number of internal volumes: 1 [ 1.390000] UBI: number of user volumes: 1 [ 1.390000] UBI: available PEBs: 0 [ 1.400000] UBI: total number of reserved PEBs: 896 [ 1.400000] UBI: number of PEBs reserved for bad PEB handling: 8 [ 1.410000] UBI: max/mean erase counter: 1/0 [ 1.410000] UBI: image sequence number: 0 [ 1.420000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.420000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI [ 1.430000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 [ 1.440000] UBI: background thread "ubi_bgt0d" started, PID 452 [ 1.470000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 [ 1.490000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00 [ 1.490000] usb usb1: configuration #1 chosen from 1 choice [ 1.500000] hub 1-0:1.0: USB hub found [ 1.500000] hub 1-0:1.0: 1 port detected [ 1.510000] xhci_hcd 0000:00:01.0: xHCI Host Controller [ 1.510000] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2 [ 1.520000] xhci_hcd 0000:00:01.0: irq 9, io mem 0xe0000000 [ 1.530000] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor [ 1.540000] usb usb2: configuration #1 chosen from 1 choice [ 1.540000] xHCI xhci_add_endpoint called for root hub [ 1.540000] xHCI xhci_check_bandwidth called for root hub [ 1.540000] hub 2-0:1.0: USB hub found [ 1.550000] hub 2-0:1.0: 4 ports detected [ 1.550000] Initializing USB Mass Storage driver... [ 1.550000] usbcore: registered new interface driver usb-storage [ 1.560000] USB Mass Storage support registered. [ 1.570000] usbcore: registered new interface driver ums-datafab [ 1.570000] usbcore: registered new interface driver ums-freecom [ 1.580000] usbcore: registered new interface driver ums-jumpshot [ 1.580000] usbcore: registered new interface driver ums-sddr09 [ 1.590000] usbcore: registered new interface driver ums-sddr55 [ 1.600000] usbcore: registered new interface driver ums-usbat [ 1.600000] mice: PS/2 mouse device common for all mice [ 1.610000] i2c /dev entries driver [ 1.610000] cpufreq: Setting CPU Frequency to 800000 KHz [ 1.610000] cpufreq: Setting PowerSaveState to off [ 1.620000] sdhci: Secure Digital Host Controller Interface driver [ 1.620000] sdhci: Copyright(c) Pierre Ossman [ 1.630000] mmc0: mvsdio driver initialized, using GPIO 27 for card detection [ 1.640000] usbcore: registered new interface driver usbhid [ 1.640000] usbhid: v2.6:USB HID core driver [ 1.650000] TCP cubic registered [ 1.650000] NET: Registered protocol family 17 [ 1.660000] RPC: Registered udp transport module. [ 1.660000] RPC: Registered tcp transport module. [ 1.670000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.820000] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 1.820000] UBIFS: file system size: 110850048 bytes (108252 KiB, 105 MiB, 873 LEBs) [ 1.830000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) [ 1.840000] UBIFS: media format: w4/r0 (latest is w4/r0) [ 1.840000] UBIFS: default compressor: lzo [ 1.850000] UBIFS: reserved for root: 0 bytes (0 KiB) [ 1.850000] VFS: Mounted root (ubifs filesystem) on device 0:11. [ 1.860000] Freeing init memory: 124K [ 1.930000] usb 2-1: new high speed USB device using xhci_hcd and address 0 [ 1.980000] usb 2-1: configuration #1 chosen from 1 choice [ 2.000000] scsi2 : SCSI emulation for USB Mass Storage devices [ 2.020000] usb-storage: device found at 2 [ 2.020000] usb-storage: waiting for device to settle before scanning [ 4.280000] eth0: link down [ 4.280000] eth0: started [ 5.810000] eth0: link up, full duplex, speed 1 Gbps [ 7.020000] scsi 2:0:0:0: Direct-Access USB Flash Disk 1.00 PQ: 0 ANSI: 2 [ 7.040000] sd 2:0:0:0: [sda] 7900336 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 7.040000] sd 2:0:0:0: [sda] Write Protect is off [ 7.050000] sd 2:0:0:0: [sda] Mode Sense: 0b 00 00 08 [ 7.050000] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.060000] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.060000] sda: sda1 [ 7.080000] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 7.090000] usb-storage: device scan complete [ 7.100000] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.100000] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 7.890000] IRQ 93 uses trigger mode 0; requested 3 [ 7.900000] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0 [ 7.910000] xce_ebtn: Pogoplug series V4 eject button initialized. [ 8.050000] ufsd: module license 'Commercial product' taints kernel. [ 8.060000] Disabling lock debugging due to kernel taint [ 8.090000] ufsd: driver (8.6 (U86_S[2012-02-28-18:39:23]), LBD=ON, delalloc, ioctl) loaded at bf00c000 [ 8.090000] NTFS support included [ 8.090000] Hfs+/HfsX support included [ 8.090000] For 'CloudEngines_PogoPlug_2011-08-03' [ 8.430000] rtusb init rt2870 ---> [ 8.440000] usbcore: registered new interface driver rt2870 [ 8.470000] Cloud Engines XCE Init [Version: 3.9.0.4] [ 8.470000] XCE: CPU MEMORY MAP: [ 8.470000] XCE: -- 0x00001000 - 0xbeffffff (3055 MB) User Space Mappings [ 8.480000] XCE: -- 0xbf000000 - 0xbfffffff ( 16 MB) Kernel module space [ 8.490000] XCE: -- 0xc0000000 - 0xc7ffffff ( 128 MB) Kernel direct-mapped ram [ 8.490000] XCE: -- 0xc8800000 - 0xe7ffffff ( 504 MB) Kernel vmalloc space [ 8.500000] XCE: -- 0xe8000000 - 0xfeffffff ( 367 MB) Kernel platform space [ 8.510000] XCE: CPU FEATURES: [ 8.510000] XCE: -- I Cache: enabled [ 8.520000] XCE: -- D Cache: enabled [ 8.520000] XCE: -- Branch Predict: disabled [ 8.530000] XCE: -- MMU: enabled [ 8.530000] XCE: -- Alignment Abort: enabled [ 8.540000] XCE: BLPARAMS: -- Loading properties [c4d43efc]. [ 8.540000] XCE: BLPARAMS: -- MTD @ [c45c1c00]. [ 8.550000] XCE: BLPARAMS: Locating parameter block... [ 8.550000] XCE: BLPARAMS: reading 2048 bytes @ a0000 [ 8.560000] XCE: Loaded Property Size: 2048 [ 8.570000] XCE: - 'cesvcid' -> '9MATQKRVSFSQ42R95T2MRDHMHN' [ 8.570000] XCE: - 'ceboardver' -> 'PPV4A3' [ 8.580000] XCE: -- ICache Prefetch: enabled [ 8.580000] XCE: -- DCache Prefetch: enabled [ 8.590000] XCE: -- L2 Cache: enabled [ 8.590000] XCE: -- L2 Prefetch: disabled [ 8.590000] XCE: -- L2 Writethrough: disabled [ 8.600000] XCE: -- Write Allocate: disabled [ 8.600000] XCE: -- Streaming: disabled [ 8.610000] XCE: Current GPIO State: [ 8.610000] XCE: GPIO L OUT: 0x01f18400 [ 8.620000] XCE: GPIO L OE: 0xfe004800 [ 8.620000] XCE: GPIO L BLINK: 0x00000000 [ 8.620000] XCE: GPIO L POL: 0x28000000 [ 8.630000] XCE: GPIO L IN: 0x11f00000 [ 8.630000] XCE: GPIO H OUT: 0x00000008 [ 8.640000] XCE: GPIO H OE: 0x00000005 [ 8.640000] XCE: GPIO H BLINK: 0x00000000 [ 8.640000] XCE: GPIO H POL: 0x00000000 [ 8.650000] XCE: GPIO H IN: 0x00000008 [ 8.830000] XCE: BLPARAMS: -- Loading properties [c4bbfecc]. [ 8.830000] XCE: BLPARAMS: -- MTD @ [c45c1c00]. [ 8.840000] XCE: BLPARAMS: Locating parameter block... [ 8.840000] XCE: BLPARAMS: reading 2048 bytes @ a0000 [ 8.850000] XCE: BLPARAMS: reading 2048 bytes @ a0800 [ 8.860000] XCE: BLPARAMS: reading 2048 bytes @ a1000 [ 8.860000] XCE: BLPARAMS: reading 2048 bytes @ a1800 [ 14.210000] XCE: XCE: LED -> CONNECTED [ 27.670000] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hbplug rqt 128 rq 6 len 255 ret -110 [ 32.670000] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hbplug rqt 128 rq 6 len 255 ret -110 [ 37.670000] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hbplug rqt 128 rq 6 len 255 ret -110 [ 42.670000] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hbplug rqt 128 rq 6 len 255 ret -110

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.137 (builder@buildhost) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.3.0 r23630-842932a63d) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 Tue Nov 14 13:38:11 2023 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Cloud Engines PogoPlug Series 4 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 119688K/131072K available (6238K kernel code, 586K rwdata, 980K rodata, 1024K init, 217K bss, 11384K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000002] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000064] Switching to timer-based delay loop, resolution 6ns [ 0.000286] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.000339] CPU: Testing write buffer coherency: ok [ 0.000496] pid_max: default: 32768 minimum: 301 [ 0.002216] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002274] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.007334] Setting up static identity map for 0x100000 - 0x10003c [ 0.007714] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.013491] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.013554] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.013921] pinctrl core: initialized pinctrl subsystem [ 0.016896] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.017641] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.019419] thermal_sys: Registered thermal governor 'step_wise' [ 0.019547] cpuidle: using governor ladder [ 0.020018] Feroceon L2: Enabling L2 [ 0.020157] Feroceon L2: Cache support initialised. [ 0.029141] No ATAGs? [ 0.039554] SCSI subsystem initialized [ 0.039864] libata version 3.00 loaded. [ 0.040246] usbcore: registered new interface driver usbfs [ 0.040326] usbcore: registered new interface driver hub [ 0.040391] usbcore: registered new device driver usb [ 0.042143] clocksource: Switched to clocksource orion_clocksource [ 0.043992] NET: Registered PF_INET protocol family [ 0.044278] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.045260] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.045321] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.045350] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.045385] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.045420] TCP: Hash tables configured (established 1024 bind 1024) [ 0.045574] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.045621] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.046045] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.046107] PCI: CLS 0 bytes, default 32 [ 0.048979] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.057248] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.057288] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.059962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.063154] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 0.065094] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges: [ 0.065168] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000 [ 0.065216] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 0.065249] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 0.065564] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 0.065591] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.065620] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff]) [ 0.065644] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 0.065665] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 0.065791] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 0.067161] PCI: bus0: Fast back to back transfers disabled [ 0.067187] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.067419] pci 0000:01:00.0: [1b73:1009] type 00 class 0x0c0330 [ 0.067466] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] [ 0.067503] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 0.067536] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit] [ 0.067637] pci 0000:01:00.0: supports D1 [ 0.067655] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 0.067699] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 0.068992] PCI: bus1: Fast back to back transfers disabled [ 0.069016] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.069301] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff] [ 0.069338] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 0.069374] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit] [ 0.069408] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit] [ 0.069442] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.069466] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 0.069553] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 0.069580] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.070639] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.073533] printk: console [ttyS0] disabled [ 0.073672] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 0.712068] printk: console [ttyS0] enabled [ 0.717193] Loading iSCSI transport class v2.0-870. [ 0.729121] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 0.735512] nand: Hynix H27U1G8F2BTR-BC [ 0.739331] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.746941] Scanning device for bad blocks [ 0.865483] 3 fixed-partitions partitions found on MTD device orion_nand [ 0.872182] Creating 3 MTD partitions on "orion_nand": [ 0.877309] 0x000000000000-0x0000001c0000 : "uboot" [ 0.886015] 0x0000001c0000-0x000000200000 : "uboot_env" [ 0.892114] 0x000000200000-0x000008000000 : "ubi" [ 0.918443] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 1.683399] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:01:a6 [ 2.722155] rtc-mv f1010300.rtc: internal RTC not ticking [ 2.727687] i2c_dev: i2c /dev entries driver [ 2.732910] orion_wdt: Initial timeout 25 sec [ 2.746896] marvell-cesa f1030000.crypto: CESA device successfully registered [ 2.755629] NET: Registered PF_INET6 protocol family [ 2.763753] Segment Routing with IPv6 [ 2.767530] In-situ OAM (IOAM) with IPv6 [ 2.771560] NET: Registered PF_PACKET protocol family [ 2.776696] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.789973] 8021q: 802.1Q VLAN Support v1.8 [ 2.801338] UBI: auto-attach mtd2 [ 2.804722] ubi0: attaching mtd2 [ 3.012923] ubi0: scanning is finished [ 3.032068] ubi0: attached mtd2 (name "ubi", size 126 MiB) [ 3.037595] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes [ 3.044473] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 3.051153] ubi0: VID header offset: 512 (aligned 512), data offset: 2048 [ 3.057933] ubi0: good PEBs: 1008, bad PEBs: 0, corrupted PEBs: 0 [ 3.064023] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 3.071224] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 747381034 [ 3.080249] ubi0: available PEBs: 0, total reserved PEBs: 1008, PEBs reserved for bad PEB handling: 20 [ 3.089978] ubi0: background thread "ubi_bgt0d" started, PID 222 [ 3.097631] block ubiblock0_1: created from ubi0:1(rootfs) [ 3.103139] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem [ 3.119003] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 3.130412] Freeing unused kernel image (initmem) memory: 1024K [ 3.136401] Run /sbin/init as init process [ 3.140483] with arguments: [ 3.140489] /sbin/init [ 3.140496] with environment: [ 3.140502] HOME=/ [ 3.140508] TERM=linux [ 3.625367] init: Console is alive [ 3.629145] init: - watchdog - [ 4.380443] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.557775] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.569655] fsl-ehci: Freescale EHCI Host controller driver [ 4.578369] ehci-orion: EHCI orion driver [ 4.582681] orion-ehci f1050000.ehci: EHCI Host Controller [ 4.588209] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 4.596151] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 4.622203] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 4.629166] hub 1-0:1.0: USB hub found [ 4.633833] hub 1-0:1.0: 1 port detected [ 4.641765] ehci-platform: EHCI generic platform driver [ 4.657250] sata_mv f1080000.sata: version 1.28 [ 4.657700] sata_mv f1080000.sata: slots 32 ports 1 [ 4.667104] scsi host0: sata_mv [ 4.670713] ata1: SATA max UDMA/133 irq 32 [ 5.172184] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.180878] ata1.00: supports DRM functions and may not be fully accessible [ 5.187842] ata1.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT01B6Q, max UDMA/133 [ 5.194979] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 5.215197] ata1.00: Features: Trust Dev-Sleep [ 5.222126] ata1.00: supports DRM functions and may not be fully accessible [ 5.230575] ata1.00: configured for UDMA/133 [ 5.235359] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 5.245394] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 5.254099] sd 0:0:0:0: [sda] Write Protect is off [ 5.258907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.259082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.273980] sda: sda1 [ 5.277867] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.296228] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.301490] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 5.310296] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 5.319839] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.325098] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 5.332498] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 5.339776] hub 2-0:1.0: USB hub found [ 5.344442] hub 2-0:1.0: 2 ports detected [ 5.349313] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.358913] hub 3-0:1.0: USB hub found [ 5.363575] hub 3-0:1.0: 2 ports detected [ 5.388608] mvsdio f1090000.mvsdio: Got CD GPIO [ 5.393234] mvsdio f1090000.mvsdio: Got WP GPIO [ 5.427029] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.444821] init: - preinit - [ 5.765796] mmc0: new high speed SDHC card at address 39f6 [ 5.860153] mmcblk0: mmc0:39f6 SD08G 7.42 GiB [ 5.898114] mmcblk0: p1 [ 5.987909] random: procd: uninitialized urandom read (4 bytes read) [ 5.994400] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd [ 6.744251] random: jshn: uninitialized urandom read (4 bytes read) [ 6.893626] random: jshn: uninitialized urandom read (4 bytes read) [ 6.995366] random: jshn: uninitialized urandom read (4 bytes read) [ 7.052741] random: jshn: uninitialized urandom read (4 bytes read) [ 7.080354] random: jshn: uninitialized urandom read (4 bytes read) [ 10.291848] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 10.329415] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 412 [ 10.368810] UBIFS (ubi0:2): recovery needed [ 10.538178] UBIFS (ubi0:2): recovery completed [ 10.542830] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 10.550639] UBIFS (ubi0:2): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 10.560557] UBIFS (ubi0:2): FS size: 119863296 bytes (114 MiB, 929 LEBs), max 940 LEBs, journal size 6064128 bytes (5 MiB, 47 LEBs) [ 10.572369] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB) [ 10.578961] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID CB30E071-F782-4FCE-8F44-C1286E3DAD24, small LPT model [ 10.595644] mount_root: loading kmods from internal overlay [ 10.665339] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 10.692708] usb-storage 3-1:1.0: USB Mass Storage device detected [ 10.699391] usb-storage 3-1:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 10.707199] scsi host1: usb-storage 3-1:1.0 [ 10.711929] usbcore: registered new interface driver usb-storage [ 10.722398] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 10.897967] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 10.907874] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.926817] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 10.936429] block: extroot: not configured [ 10.942041] mount_root: switching to ubifs overlay [ 10.956920] urandom-seed: Seeding with /etc/urandom.seed [ 11.070002] procd: - early - [ 11.073199] procd: - watchdog - [ 11.762914] scsi 1:0:0:0: Direct-Access ST10000D M0004-1ZC101 DN01 PQ: 0 ANSI: 5 [ 11.773914] procd: - watchdog - [ 11.778445] procd: - ubus - [ 11.792978] sd 1:0:0:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 11.812354] sd 1:0:0:0: [sdb] Write Protect is off [ 11.817192] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 11.877093] sd 1:0:0:0: [sdb] No Caching mode page found [ 11.882480] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 11.892650] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.905353] sdb: sdb1 sdb2 sdb3 sdb4 [ 11.912731] sd 1:0:0:0: [sdb] Attached SCSI disk [ 11.924107] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.932613] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.943809] procd: - init - [ 12.911435] random: ubusd: uninitialized urandom read (4 bytes read) [ 13.197753] urngd: jent-rng init failed, err: 11 [ 13.465553] EXT4-fs (sda1): recovery complete [ 13.472476] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: . Quota mode: disabled. [ 13.487760] kmodloader: loading kernel modules from /etc/modules.d/* [ 14.040915] ksmbd: The ksmbd server is experimental, use at your own risk. [ 14.245641] PPP generic driver version 2.4.2 [ 14.266010] NET: Registered PF_PPPOX protocol family [ 14.304783] kmodloader: done loading kernel modules from /etc/modules.d/* [ 14.868409] EXT4-fs (sdb4): warning: mounting unchecked fs, running e2fsck is recommended [ 14.877616] EXT4-fs (sdb4): mounted filesystem without journal. Opts: . Quota mode: disabled. [ 19.292177] random: crng init done [ 19.295592] random: 73 urandom warning(s) missed due to ratelimiting [ 22.959779] br-lan: port 1(eth0) entered blocking state [ 22.965073] br-lan: port 1(eth0) entered disabled state [ 22.970582] device eth0 entered promiscuous mode [ 25.980261] ksmbd: The ksmbd server is experimental, use at your own risk. [ 26.207009] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 26.218258] br-lan: port 1(eth0) entered blocking state [ 26.223529] br-lan: port 1(eth0) entered forwarding state [ 26.245809] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 29.187600] ksmbd: The ksmbd server is experimental, use at your own risk. [ 131.724940] Adding 131128k swap on /dev/sdb2. Priority:-2 extents:1 across:131128k [ 355.766686] ksmbd: The ksmbd server is experimental, use at your own risk. [ 367.265839] ksmbd: The ksmbd server is experimental, use at your own risk. [ 397.855770] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: . Quota mode: disabled. [ 444.764512] ksmbd: Failed to send message: -32 [70834.613107] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. BusyBox v1.36.1 (2023-11-14 13:38:11 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 23.05.2, r23630-842932a63d ----------------------------------------------------- root@Yog-Sototh:~#