SKY Q Hub - ER115
There is also a rebranding of the same model. This is the NowTV Hub 2 - NR801. The PCB is the same including the SKY branding on the inside.
- ER115 GPL Source code: http://www1.sky.com/opensourcesoftware/SkyQ/SkyQHub/SkyQHub_downloads.html
- NR801 GPL Source code: http://www1.sky.com/opensourcesoftware/NowTvHub/NowTv_hub_downloads.html
- Manufacturer's / Distributor's site: http://www.sky.com/shop/broadband-talk/
Supported Versions
Not Supported
Model | Version | Launch Date | S/N format | OpenWrt Version Supported | Model Specific Notes |
---|---|---|---|---|---|
SKY | ER115 | Early 2018 | X######A###### | None - Test Only | No ADSL, No WiFi, ½ Ethernet |
Hardware Highlights
Model | Versions | CPU | CPU MHz | Flash MiB | RAM MiB | WLAN 2.4GHz | WLAN 5.0GHz | Ethernet 100M | Ethernet Gbit | Modem | USB ports | Serial | JTAG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SKY | ER115 | BCM63168 | 400 MHz | 32 | 256 | SoC-integrated BCM435F | BCM436C | - | 2 | VDSL | 0 | Yes | Yes |
Testing / Installation
You will need a eJTAG connection and recommend a TTL Serial connection to change the firmware. There maybe a 'Serial only' way of changing the firmware, but it has not been figured out yet.
Download this zip package and follow the readme file. It is intended for Windows users as Linux users will mostly likely have there own eJTAG method.
This file includes modified CFE's, a Openwrt-21 image and a a modified OEM firmware for easier experimenting.
Due to a fixed odd MAC Address it will not communicate with some Linux devices.
Just to be clear, this is not useable, it is just for fun
CFE
→ cfe Details about Broadcoms CFE's
The file above contains 3 CFE's and a little program to add a 40 byte footer tag to a new image. So it can be uploaded via the Recovery Mode. (Hold WPS button and tap Reset)
Specific Configuration
Wireless
BCM435F is the pseudo-id used for the integrated wifi of BCM6362/63268 SoCs, for which no usable driver exists
Same for the 5Ghz chip
LAN
Port 1: Gigabit Ethernet is connected to the B50612E similar chip datasheet, which uses the same ID as a BCM54612E.
Port 2: Gigabit Ethernet comes direct from the SoC and referenced as Port [3] in swconfig.
GPIOs
There is 'chip460' & 'chip480' covering 52 GPIOs.
Leds
Label | GPIO (from 480) | On Value |
---|---|---|
Orange Lan2 | 0 | 0 |
Green1 Lan2 | 1 | 1 |
Red Power | 2 | 0 |
Green Power | 3 | 0 |
Red Inet | 4 | 0 |
Green Inet | 5 | 0 |
Green WiFi | 7 | 0 |
Green2 Lan2 | 12 | 0 |
Green WPS | 14 | 0 |
Red WPS | 15 | 0 |
Green1 Lan1 | PHY Chip | |
Green2 Lan1 | PHY Chip | |
Orange Lan1 | PHY Chip |
Hardware
Info
Instruction set | MIPS |
---|---|
Vendor | Broadcom |
Bootloader | OEM cfe |
Board ID | BSKYB_VIPER |
System-On-Chip | BCM63168 rev D0 |
CPU @Frq | BMIPS4350 V8.0 @400MHz |
Flash size | HS-SPI: 32768 KiB |
Flash Chip | FL256SAIH30, similar with S25FL128P |
RAM size | 256 MiB |
RAM Chip | K4B2G1646F / DDR3-1600 |
Wireless 2.4 Ghz | SoC-integrated: Broadcom BCM435F 802.11b/g/n (ID=14e4:435f) |
Wireless 5 Ghz | BCM436CKMLC similar chip datasheet |
Switch | SoC-integrated: B53_common (ID=6300) |
USB | No |
PSU | 12v 2amp external SMPS |
Serial | Yes |
JTAG | Yes |
Photos
Main PCB
Serial & JTAG
→ port.serial general information about the serial port, serial port cable, etc.
→ port.jtag general information about the JTAG port, JTAG cable, etc.
The Layout of the pin header is the same as the previous model:
GND | TX | TDI | TMS | Reset |
+3v | RX | TRST | TDO | TCK |
The left 3 or 4 pins are the Serial Port. (115K2, 8, N, 1)
The JTAG 'TRST' pin should be pulled high, leave the 'Reset' unconnected
This does not have basic JTAG Boundary Scan, because of the multi-core design. So you will need eJTAG instructions
The J4600 port might be a I2C.
Opening the Box
There are 5 screws. 1 on the bottom middle, and 4 under the large removable plastic trim. You should remove the 3 IPX antennas plugs before popping out the plastic inner.
Bootlogs
OEM bootlog
From the early release 2.06.2189.R (Q1 2018):
HELO CPUI L1CI HELO CPUI L1CI 4.1404-1.0.38-150.001 DRAM ---- PHYS STRF 400H PHYE DDR3 SIZ4 SIZ3 DINT USYN LSYN MFAS LMBE RACE PASS ---- ZBSS CODE DATA L12F MAIN Base: 4.14_04 CFE version 1.0.38-150.1 for BCM963268 (32bit,SP,BE) Build Date: Fri 15 Apr 10:47:19 BST 2016 (johnson@johnson-lnx-deb) Copyright (C) 2000-2013 Broadcom Corporation. Chip ID: BCM63168D0, MIPS: 400MHz, DDR: 400MHz, Bus: 200MHz Main Thread: TP0 Memory Test Passed Total Memory: 268435456 bytes (256MB) Boot Address: 0xb8000000 HS Serial flash device: S25FL256, id 0x0119 size 32768KB Total Flash size: 32768K with 512 sectors Flash split 10 : AuxFS[3407872] Board IP address : 192.168.0.1:ffffff00 Host IP address : 192.168.0.100 Gateway IP address : Run from flash/host/tftp (f/h/c) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Boot image (0=latest, 1=previous) : 0 Default host ramdisk file name : Default ramdisk store address : Board Id (0-33) : BSKYB_VIPER Number of MAC Addresses (1-32) : 10 Base MAC Address : 00:10:18:00:00:00 PSI Size (1-64) KBytes : 40 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Auxillary File System Size Percent: 10 Main Thread Number [0|1] : 0 Booting from latest image (0xb8080000) ... Signature@Offset: [0x00c51e78] FLASH IMAGE SIGNATURE OK Code Address: 0x807525B0, Entry Address: 0x803a5610 RootFS & Kernel CRCs are correct. Decompression OK! Entry at 0x803a5610 Closing network. Disabling Switch ports. Flushing Receive Buffers... 0 buffers found Closing DMA Channels Starting program at 0x803a5610 ********* Log stops here, the rest of the log is with the serial port reconfigured ********* Linux version 3.4.11-rt19 (build@vm001737) (gcc version 4.6.2 (Buildroot 2011.11) ) #1 SMP PREEMPT Mon Oct 2 09:21:21 BST 2017 HS Serial flash device: S25FL256, id 0x0119 size 32768KB macaddr - 80:75:1f:00:00:00 bootline = e=192.168.0.1:ffffff00 h=192.168.0.100 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0 c= a= BSKYB_VIPER szBoardId 0x805a9668 szVoiceBoardId 0x805a97dc ulNumMacAddrs 0xa ulPsiSize 0x28 ulPsiSize 0x28 backupPsi 0x0 ulSyslogSize 0x0 BSKYB_VIPER prom init CPU revision is: 0002a080 (Broadcom BMIPS4350) DSL SDRAM reserved: 0x132000 Determined physical RAM map: memory: 0fece000 @ 00000000 (usable) Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0000fece Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000000 -> 0x0000fece On node 0 totalpages: 65230 free_area_init_node: node 0, pgdat 80455f60, node_mem_map 81000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 478 pages used for memmap Normal zone: 60656 pages, LIFO batch:15 PERCPU: Embedded 7 pages/cpu @81203000 s5088 r8192 d15392 u32768 pcpu-alloc: s5088 r8192 d15392 u32768 alloc=8*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64720 Kernel command line: ro noinitrd irqaffinity=0 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes Memory: 252712k/260920k available (3722k kernel code, 8208k reserved, 655k data, 212k init, 0k highmem) Preemptible hierarchical RCU implementation. NR_IRQS:128 Status register]:0x4 console [ttyS1] enabled Calibrating delay loop... 397.31 BogoMIPS (lpj=198656) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 --Kernel Config-- SMP=1 PREEMPT=1 DEBUG_SPINLOCK=0 DEBUG_MUTEXES=0 Broadcom Logger v0.1 Oct 2 2017 09:19:59 CPU revision is: 0002a080 (Broadcom BMIPS4350) Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes Brought up 2 CPUs NET: Registered protocol family 16 Total Flash size: 32768K with 512 sectors Flash split 10 : AuxFS[3407872] Internal 1P2 VREG will be shutdown if unused...Unused, turn it off (00009266-0000925f=7<300) Registering platform I2C devices registering PCI controller with io_map_base unset registering PCI controller with io_map_base unset bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0xa0f00000-0xa0ffffff] pci_bus 0000:00: root bus resource [io 0xa2000000-0xa200ffff] pci 0000:00:00.0: [14e4:435f] type 00 class 0x028000 pci 0000:00:00.0: reg 10: [mem 0x10004000-0x10005fff] pci 0000:00:09.0: [14e4:6300] type 00 class 0x0c0310 pci 0000:00:09.0: reg 10: [mem 0x10002600-0x100026ff] pci 0000:00:0a.0: [14e4:6300] type 00 class 0x0c0320 pci 0000:00:0a.0: reg 10: [mem 0x10002500-0x100025ff] PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [mem 0x11000000-0x11efffff] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0] pci 0000:01:00.0: [14e4:6326] type 01 class 0x060400 pci 0000:01:00.0: PME# supported from D0 D3hot pci 0000:02:00.0: [14e4:4360] type 00 class 0x028000 pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit] pci 0000:02:00.0: supports D1 D2 pci 0000:01:00.0: BAR 8: assigned [mem 0x11000000-0x110fffff] pci 0000:02:00.0: BAR 0: assigned [mem 0x11000000-0x11007fff 64bit] pci 0000:01:00.0: PCI bridge to [bus 02-02] pci 0000:01:00.0: bridge window [mem 0x11000000-0x110fffff] PCI: Enabling device 0000:01:00.0 (0000 -> 0002) bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated bcmleg_spi bcmleg_spi.0: master is unqueued, this is deprecated skbFreeTask created successfully BLOG v3.0 Initialized BLOG Rule v1.0 Initialized Broadcom IQoS v0.1 Oct 2 2017 09:21:08 initialized Broadcom GBPM v0.1 Oct 2 2017 09:21:08 initialized NET: Registered protocol family 8 NET: Registered protocol family 20 nfc: nfc_init: NFC Core ver 0.1 NET: Registered protocol family 39 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1 PCI: CLS mismatch (64 != 16), using 16 bytes bcm_tstamp initialized, (hpt_freq=200000000 2us_div=200 2ns_mult=5 2ns_shift=0) squashfs: version 4.0 (2009/01/31) Phillip Lougher jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.18) msgmni has been set to 493 io scheduler noop registered (default) bcm963xx_mtd driver File system address: 0xb8080100 Registered device mtd:rootfs dev0 Address=0xb8080100 Size=10833920 Registered device mtd:data dev1 Address=0xb9ca0000 Size=3407872 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered NET: Registered protocol family 24 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) ehci_hcd 0000:00:0a.0: setting latency timer to 64 ehci_hcd 0000:00:0a.0: EHCI Host Controller ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM ehci_hcd 0000:00:0a.0: irq 18, io mem 0x10002500 ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Enabling device 0000:00:09.0 (0000 -> 0002) ohci_hcd 0000:00:09.0: setting latency timer to 64 ohci_hcd 0000:00:09.0: OHCI Host Controller ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:09.0: irq 17, io mem 0x10002600 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver usblp i2c /dev entries driver Initalisg watchdog: WatchDogDefCount=2000000000 brcmboard: brcm_board_init entry SES: Button Interrupt 0x1 is enabled SES: LED GPIO 0x800e is enabled Serial: BCM63XX driver $Revision: 3.00 $ Magic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands) ttyS0 at MMIO 0xb00001a0 (irq = 42) is a BCM63XX ttyS1 at MMIO 0xb0000180 (irq = 13) is a BCM63XX Total # RxBds=1448 bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized bcmPktDma_init: Broadcom Packet DMA Library initialized bcmxtmrt: Broadcom BCM3168D0 ATM/PTM Network Device v0.5 Oct 2 2017 09:20:58 IPSEC SPU: SUCCEEDED GACT probability NOT on Mirror/redirect action on netem: version 1.3 u32 classifier input device check on Actions configured xt_time: kernel timezone is -0000 TCP: cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Initializing MCPD Module Ebtables v2.0 registered ebt_time registered ebt_ftos registered ebt_wmm_mark registered 8021q: 802.1Q VLAN Support v1.8 VFS: Mounted root (squashfs filesystem) readonly on device 31:0. Freeing unused kernel memory: 212k freed init started: BusyBox v1.17.2 (2017-10-02 09:22:54 BST) starting pid 237, tty '': '/bin/sh -l -c "bcm_boot_launcher start"' Mounting filesystems... Configuring system... Loading drivers and kernel modules... chipinfo: module license 'proprietary' taints kernel. Disabling lock debugging due to kernel taint brcmchipinfo: brcm_chipinfo_init entry Broadcom Ingress QoS Module Char Driver v0.1 Oct 2 2017 09:20:30 Registered<243> Broadcom Ingress QoS ver 0.1 initialized BPM: tot_mem_size=268435456B (256MB), buf_mem_size <15%> =40265310B (38MB), num of buffers=15534, buf size=2592 Broadcom BPM Module Char Driver v0.1 Oct 2 2017 09:20:20 Registered<244> NBUFF v1.0 Initialized Initialized fcache state Broadcom Packet Flow Cache Char Driver v2.2 Oct 2 2017 09:20:31 Registered<242> Created Proc FS /procfs/fcache Broadcom Packet Flow Cache registered with netdev chain Broadcom Packet Flow Cache learning via BLOG enabled. [FHW] pktDbgLvl[0xc00c8320]=0 [FHW] fhw_construct: Initialized Fcache HW accelerator layer state flwStatsThread created Constructed Broadcom Packet Flow Cache v2.2 Oct 2 2017 09:20:31 chipId 0x631680D0 Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Oct 2 2017 09:20:21 Registered <241> Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000 FAP Soft Reset Done 4ke Reset Done Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000 FAP Soft Reset Done 4ke Reset Done FAP Debug values at 0xac9a16e0 0xaca216e0 fapGso_LoopBkThread created successfully Allocated FAP0 SWQ_HOST2FAP_GSO_LOOPBACK_Q mem=afbf0000 : 16384 bytes Allocated FAP0 SWQ_FAP2HOST_GSO_LOOPBACK_Q mem=afbdc000 : 16384 bytes GSO LOOPBACK Cached HOST2FAP Q INFO: Swq =b0825ee0 qStart=afbf0000 qEnd=afbf4000 msgSize=4 dqm=18 fapId=0 GSO LOOPBACK Cached FAP2HOST Q INFO: Swq =b0825ec0 qStart=afbdc000 qEnd=afbe0000 msgSize=2 dqm=19 fapId=0 Allocated FAP0 TM SDRAM Queue Storage (ac9b2770) : 390144 bytes @ aca80000 Allocated FAP1 TM SDRAM Queue Storage (aca32770) : 390144 bytes @ acb00000 [NTC fapProto] fapReset : Reset FAP Protocol layer [FAP0] DSPRAM : stack <0x80000000><1536>, global <0x80000600><4280>, free <2376>, total<8192> [FAP1] DSPRAM : stack <0x80000000><1536>, global <0x80000600><4280>, free <2376>, total<8192> [FAP0] PSM : addr<0x80002000>, used <24320>, free <256>, total <24576> [FAP1] PSM : addr<0x80002000>, used <24320>, free <256>, total <24576> [FAP0] DQM : availableMemory 14660 bytes, nextByteAddress 0xE000489C [FAP1] DQM : availableMemory 14660 bytes, nextByteAddress 0xE000489C [FAP0] Initializing FAP4KE GSO LOOPBACK on fapIdx=0 ... [FAP1] FAP BPM Initialized. [FAP0] SWQ: HOST2FAP_GSO_LOOPBACK [FAP0] >>>>------------------ [FAP0] swq =80007ee0 msgSize =4 words , maxDepth=1024 [FAP0] qStart =afbf0000 qEnd=afbf4000 [FAP0] rdPtr =afbf0000 wrPtr=afbf0000 count=0 [FAP0] processed =0 dropped =0 [FAP0] Associated DQM=18 dir HOST2FAP [FAP0] ------------------<<<< [FAP0] SWQ: FAP2HOST_GSO_LOOPBACK [FAP0] >>>>------------------ [FAP0] swq =80007ec0 msgSize =2 words , maxDepth=2048 [FAP0] qStart =afbdc000 qEnd=afbe0000 [FAP0] rdPtr =afbdc000 wrPtr=afbdc000 count=0 [FAP0] processed =0 dropped =0 [FAP0] Associated DQM=19 dir FAP2HOST [FAP0] ------------------<<<< [FAP0] FAP4KE GSO LOOPBACK Init Done... [FAP0] FAP BPM Initialized. Broadcom Packet Flow Cache HW acceleration enabled. fapDrv_construct: FAP0: pManagedMemory=b0820650. wastage 8 bytes fapDrv_construct: FAP1: pManagedMemory=b0a20650. wastage 8 bytes bcmPktDma_bind: FAP Driver binding successfull [FAP0] FAP TM: ON [FAP1] FAP TM: ON bcmxtmcfg: bcmxtmcfg_init entry adsl: adsl_init entry Broadcom BCM63168D0 Ethernet Network Device v0.1 Oct 2 2017 09:20:48 Broadcom GMAC Char Driver v0.1 Oct 2 2017 09:20:55 Registered<249> Broadcom GMAC Driver v0.1 Oct 2 2017 09:20:55 Initialized fapDrv_psmAlloc: fapIdx=1, size: 4800, offset=b0a20650 bytes remaining 7000 ETH Init: Ch:0 - 200 tx BDs at 0xb0a20650 fapDrv_psmAlloc: fapIdx=0, size: 4800, offset=b0820650 bytes remaining 7000 ETH Init: Ch:1 - 200 tx BDs at 0xb0820650 fapDrv_psmAlloc: wastage 8 bytes fapDrv_psmAlloc: fapIdx=0, size: 4808, offset=b0821910 bytes remaining 2184 ETH Init: Ch:0 - 600 rx BDs at 0xb0821910 [FAP0] enetRxChannel 0 fapDrv_psmAlloc: wastage 8 bytes fapDrv_psmAlloc: fapIdx=1, size: 4808, offset=b0a21910 bytes remaining 2184 ETH Init: Ch:1 - 600 rx BDs at 0xb0a21910 [FAP1] enetRxChannel 1 dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered eth0: MAC Address: 80:75:1F:00:00:00 plc0: MAC Address: 80:75:1F:00:00:00 eth1: MAC Address: 80:75:1F:00:00:00 NComm TMS V6.80 Kernel Module loaded. [NTC arl] arlEnable : Enabled ARL binding to FAP Broadcom Address Resolution Logic Processor (ARL) Char Driver v0.1 Oct 2 2017 09:20:20 Registered <245> Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. p8021ag: p8021ag_init entry Broadcom 802.1Q VLAN Interface, v0.1 Starting SWMDK... Note: Loading 6300 MDK (default) driver for 63168 chip Switch MDK: num_switches = 1 Switch MDK: unit = 0;plc0 (Int switch port: 4) (Logical Port: 4) Link UP 100 mbps full duplex message received before monitor task is initialized kerSysSendtoMonitorTask phy_pbmp = 0x48; config_pbmp = 0x58 Switch MDK link poll thread: unit=0; phypbmp=0x48 config_pbmp=0x58 applyiing SKY specifig config... Success Disable txclck on RGMII1 Success set PLC link status down Success Disable txclk on RGMII2 Success Disable txclk on RGMII4 Success Disable RGMII2 port Success Disable RGMII4 port Success ****************** COPIED LOG HOOVER COMMANDS FILE ***************** Saving kernel bootup messages for dumpsysinfo... Starting CMS smd... ===== Release Version 2.06.2189.R 171002_0921 ===== Initializing CMS MDM in Hybrid98+181 mode ssk:error:8.614:rcl_skyHealthMonitorCfgObject:256:object is not more used, please [ 8.621000] Host MIPS Clock divider pwrsaving is enabled [ 8.626000] DDR Self Refresh pwrsaving is enabled use SkyDiagnostics object [ 8.635000] Energy Efficient Ethernet is disabled [ 8.639000] Adaptive Voltage Scaling is disabled because the internal regulator is powered down [ 9.059000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.324000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.650000] ADDRCONF(NETDEV_UP): br0: link is not ready [ 9.895000] Netfilter messages via NETLINK v0.30. ssk:error:10.048:rcl_lanIpIntfObject:326:Turning off TX offload on br0 interface Actual changes: tx-checksumming: off tx-checksum-ip-generic: off scatter-gather: off tx-scatter-gather: off [requested on] tcp-segmentation-offload: off tx-tcp-segmentation: off [requested on] tx-tcp-ecn-segmentation: off [requested on] tx-tcp6-segmentation: off [requested on] udp-fragmentation-offload: off [requested on] generic-segmentation-offload: off [requested on] [ 10.393000] nf_conntrack version 0.5.0 (3951 buckets, 15804 max) [ 11.514000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 11.521000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. RTNETLINK answers: No such file or directory RTNETLINK answers: No such process RTNETLINK answers: No such process RTNETLINK answers: No such file or directory RTNETLINK answers: No such process RTNETLINK answers: No such process ip6tables: No chain/target/match by that name. RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: No such process RTNETLINK answers: No such file or directory RTNETLINK answers: File exists RTNETLINK answers: File exists Warning: never matched protocol: 51. use extension match instead. [ 14.810000] ADDRCONF(NETDEV_UP): eth0: link is not ready [Jan 01 00:00:15] radvd: version 1.8 started [Jan 01 00:00:15] radvd: Warning: AdvRDNSSLifetime <= 2*MaxRtrAdvInterval would allow stale DNS servers to be deleted faster [Jan 01 00:00:15] radvd: no linklocal address configured for br0 [ 15.497000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.790000] *** dslThread dslPid=941 [ 15.793000] BcmAdsl_Initialize=0xC0251CA0, g_pFnNotifyCallback=0xC02890B0 [ 15.955000] lmemhdr[2]=0x100CE000, pAdslLMem[2]=0x100CE000 [ 15.960000] pSdramPHY=0xAFFFFFF8, 0x36265 0xDEADBEEF [ 15.965000] *** XfaceOffset: 0x5FF90 => 0x5FF90 *** [ 16.597000] *** PhySdramSize got adjusted: 0xF2EA4 => 0x1272C0 *** [ 16.603000] AdslCoreSharedMemInit: shareMemSize=44317(44320) [ 16.620000] AdslCoreHwReset: pLocSbSta=8c2e0000 bkupThreshold=3072 [ 16.626000] AdslCoreHwReset: AdslOemDataAddr = 0xAFFB1970 [ 16.631000] DSL driver initialisation skyGetADSLRouterOEMSerialNumber returns [000000000000 ER115 2.06.2189.R] [ 16.642000] ***BcmDiagsMgrRegisterClient: 0 *** [ 16.646000] dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered [ 16.653000] fapDrv_psmAlloc: fapIdx=1, size: 1600, offset=b0a22be0 bytes remaining 584 [ 16.661000] XTM Init: Ch:0 - 200 rx BDs at 0xb0a22be0 [ 16.666000] fapDrv_psmAlloc: fapIdx=1, size: 128, offset=b0a23220 bytes remaining 456 [ 16.674000] XTM Init: Ch:1 - 16 rx BDs at 0xb0a23220 [ 16.682000] bcmxtmrt: PTM/ATM Non-Bonding Mode configured in system ip6tables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). RTNETLINK answers: No such process RTNETLINK answers: No such file or directory RTNETLINK answers: File exists RTNETLINK answers: File exists ssk:error:17.731:rcl_skyMeshObject:337:***NEW*** logging delay = 600, logging status = 0 ssk:error:17.741:sky_restart_logging:2249:log_hoover.sh PID = -1 ssk:error:17.741:sky_restart_logging:2277:Created /var/network_log/copperhead_logs.tar ssk:error:17.936:rut_readAirMeshRt:1156:The proc file /proc/air_mesh_rt couldn't be opened Success lansubsysevt:error:18.083:main:1797:Lan Subsystem event listener started lansubsysevt:error:18.084:main:1815: ======== Initialising Airties LanSubsystem ======== lansubsysevt:error:18.097:main:1822:===========Going to wait for events====================== 1970-01-01 00:00:18-[00000019]-(main:317) AIR_LOGGER:Log to stderr enabled 1970-01-01 00:00:18-[00000019]-(main:349) AIR_LOGGER:max size for startup log file 30000:30000 1970-01-01 00:00:18-[00000019]-(main:367) AIR_LOGGER:opening syslog.. 1970-01-01 00:00:18-[00000019]-(main:437) AIR_LOGGER:Starting app:/etc/rc.d/rc.init 1970-01-01 00:00:18-[00000019]-(main:447) AIR_LOGGER:PID=1083 1970-01-01 00:00:18-[00000019]-AIRTIES:Running /etc/rc.d/rc.product 1970-01-01 00:00:18-[00000019]-(open_log_file:169) AIR_LOGGER:Opening log file:/airties/log/airties.log.init 1970-01-01 00:00:18-[00000019]-AIRTIES: 1970-01-01 00:00:18-[00000019]-AIRTIES:Product initialization routines 1970-01-01 00:00:18-[00000019]-AIRTIES: 1970-01-01 00:00:18-[00000019]-AIRTIES:interface wl0 does not exist! 1970-01-01 00:00:18-[00000019]-AIRTIES:ifconfig: ioctl 0x8913 failed: No such device 1970-01-01 00:00:18-[00000019]-AIRTIES:interface wl1 does not exist! 1970-01-01 00:00:19-[00000020]-AIRTIES:ifconfig: ioctl 0x8913 failed: No such device 1970-01-01 00:00:20-[00000021]-AIRTIES:rmmod: can't unload 'wl': unknown symbol in module, or unknown parameter 1970-01-01 00:00:20-[00000021]-AIRTIES:killall: acsd: no process killed 1970-01-01 00:00:20-[00000021]-AIRTIES:killall: wlevt: no process killed 1970-01-01 00:00:20-[00000021]-AIRTIES:killall: wlmngr: no process killed 1970-01-01 00:00:20-[00000021]-AIRTIES:killall: homeplugd: no process killed 1970-01-01 00:00:20-[00000021]-AIRTIES:killall: ieee1905: no process killed 1970-01-01 00:00:20-[00000021]-AIRTIES: 1970-01-01 00:00:20-[00000021]-AIRTIES:DONE /etc/rc.d/rc.product [ 20.316000] ADDRCONF(NETDEV_UP): br0: link is not ready 1970-01-01 00:00:20-[00000021]-AIRTIES:Running /etc/rc.d/rc.eth 1970-01-01 00:00:20-[00000021]-AIRTIES:Ethernet Switch: disabling hw-switching... 1970-01-01 00:00:20-[00000021]-AIRTIES:Success 1970-01-01 00:00:20-[00000021]-AIRTIES:Enabling Ethernet@Wirespeed option to support Fast ethernet... 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x4 1970-01-01 00:00:20-[00000021]-AIRTIES:) register 24 is 0x7067 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x4 1970-01-01 00:00:20-[00000021]-AIRTIES:) register 24 is 0x7077 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x4 1970-01-01 00:00:20-[00000021]-AIRTIES:) register 24 is 0x7077 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x4 1970-01-01 00:00:20-[00000021]-AIRTIES:) register 28 is 0x1000 1970-01-01 00:00:20-[00000021]-AIRTIES:eth0:Ethernet@Wirespeed DONE 1970-01-01 00:00:20-[00000021]-AIRTIES:eth0:Restart auto-negotiation 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x4 1970-01-01 00:00:20-[00000021]-AIRTIES:) register 0 is 0x1140 1970-01-01 00:00:20-[00000021]-AIRTIES:eth1 Link encap:Ethernet HWaddr 80:75:1F:00:00:00 1970-01-01 00:00:20-[00000021]-AIRTIES: UP BROADCAST MULTICAST MTU:2048 Metric:1 1970-01-01 00:00:20-[00000021]-AIRTIES: RX packets:0 multicast:0 unicast:0 broadcast:0 1970-01-01 00:00:20-[00000021]-AIRTIES: RX errors:0 dropped:0 overruns:0 frame:0 1970-01-01 00:00:20-[00000021]-AIRTIES: TX packets:0 multicast:0 unicast:0 broadcast:0 1970-01-01 00:00:20-[00000021]-AIRTIES: TX errors:0 dropped:0 overruns:0 carrier:0 collisions:0 1970-01-01 00:00:20-[00000021]-AIRTIES: txqueuelen:1000 1970-01-01 00:00:20-[00000021]-AIRTIES: 1970-01-01 00:00:20-[00000021]-AIRTIES: RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) 1970-01-01 00:00:20-[00000021]-AIRTIES: RX multicast bytes:0 (0.0 B) TX multicast bytes:0 (0.0 B) 1970-01-01 00:00:20-[00000021]-AIRTIES: 1970-01-01 00:00:20-[00000021]-AIRTIES: 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x 1970-01-01 00:00:20-[00000021]-AIRTIES:1000019) register 24 is 0x71e7 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x 1970-01-01 00:00:20-[00000021]-AIRTIES:1000019) register 24 is 0x71f7 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x1000019 1970-01-01 00:00:20-[00000021]-AIRTIES:) register 24 is 0x71f7 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x1000019 1970-01-01 00:00:20-[00000021]-AIRTIES:) register 28 is 0x1000 1970-01-01 00:00:20-[00000021]-AIRTIES:eth1:Ethernet@Wirespeed DONE 1970-01-01 00:00:20-[00000021]-AIRTIES:eth1:Restart auto-negotiation 1970-01-01 00:00:20-[00000021]-AIRTIES:mii (phy addr 0x 1970-01-01 00:00:20-[00000021]-AIRTIES:1000019) register 0 is 0x1140 1970-01-01 00:00:20-[00000021]-AIRTIES:DONE /etc/rc.d/rc.eth 1970-01-01 00:00:20-[00000021]-AIRTIES:ifconfig: sw0: error fetching interface information: Device not found 1970-01-01 00:00:20-[00000021]-AIRTIES:Running /etc/rc.d/rc.plc_power.sh 1970-01-01 00:00:20-[00000021]-AIRTIES:Power on the PLC module [ 20.911000] Done. [ 21.962000] Done. [ 23.013000] Done. [ 24.065000] Done. 1970-01-01 00:00:24-[00000025]-AIRTIES:DONE /etc/rc.d/rc.plc_power.sh:on [ 24.819000] Metric INT alg. loaded.uh-automesh: started [ 24.916000] uh-automesh: daemon start [ 24.922000] [rt_register] routing context initialized [ 24.927000] [automesh_init] module loaded 1970-01-01 00:00:24-[00000025]-(check_child:257) AIR_LOGGER:Child:1083(/etc/rc.d/rc.init) exited, status=1 1970-01-01 00:00:24-[00000025]-AIRTIES:AIR_LOGGER:Child died, exiting, but read output once again. [ 27.180000] [eth0] link blocked [ 27.185000] [eth1] link blocked [ 27.189000] hello interval for eth0 is 5000 [ 27.193000] hello interval for eth1 is 5000 [ 27.199000] allowed hello loss for eth0 is 3 [ 27.204000] allowed hello loss for eth1 is 3 [ 27.209000] [eth0] link unblocked [ 27.213000] [eth1] link unblocked [ 27.218000] [__proc_autolearn] device[eth2] is not registered [ 27.224000] [__proc_autolearn] device[eth3] is not registered [ 30.528000] --SMP support [ 30.530000] wl: dsl_tx_pkt_flush_len=338 [ 30.534000] wl: norm_wmark_tot=7159, pktc_wmark_tot=7159 [ 30.540000] uh-wlan: started [ 30.540000] uh-wlan: daemon start [ 30.546000] Initializing WLCSM Module [ 30.550000] wl 0000:00:00.0: setting latency timer to 64 [ 30.555000] wl: passivemode=1 [ 30.558000] wl0: creating kthread wl0-kthrd [ 30.573000] wl0: creating timer kthread wl0-tmr-kthrd [ 30.589000] wl: napimode=0 [ 30.596000] wl:srom/otp not programmed, using main memory mapped srom info(wombo board) [ 30.647000] wl:loading /etc/wlan/bcm6362_map.bin [ 30.683000] wl0: allocskbmode=1 currallocskbsz=3500 [ 30.716000] +++++ Added gso loopback support for dev=wl0 <8cbaf000> [ 30.723000] wl0: Broadcom BCM435f 802.11 Wireless Controller 6.37.14.4803.cpe4.14L04.0-kdb [ 30.731000] dgasp: kerSysRegisterDyingGaspHandler: wl0 registered [ 30.737000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) [ 30.743000] wl: passivemode=1 [ 30.746000] wl1: creating kthread wl1-kthrd [ 30.761000] wl1: creating timer kthread wl1-tmr-kthrd [ 30.776000] wl: napimode=0 [ 30.790000] wl:srom/otp not programmed, using main memory mapped srom info(wombo board) [ 30.798000] wl:loading /etc/wlan/bcm4360_BSKYB_VIPER_map.bin [ 30.809000] wl: reading /etc/wlan/bcm4360_nvramvars.bin, file size=32 [ 30.856000] wl1: allocskbmode=1 currallocskbsz=3500 [ 30.889000] +++++ Added gso loopback support for dev=wl1 <8932e800> [ 30.895000] wl1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.4803.cpe4.14L04.0-kdb [ 30.904000] dgasp: kerSysRegisterDyingGaspHandler: wl1 registered [ 31.592000] DJAIN, DEFAULT [ 32.233000] DJAIN, DEFAULT [ 32.895000] DJAIN, DEFAULT [ 33.240000] device wl1 entered promiscuous mode lansubsysevt:error:33.941:continue_ssk_init:910:Notifying SSK to continue CMS Initialization ssk:error:34.014:[ 34.015000] monitor task is initialized pid= 427 ssk_init:1036: ======== Continuing To Initialise CMS ======== starting pid 1602, tty '': '-/bin/sh -l -c consoled' WAN mode: AUTO ADSL/Ethenet Discovery Setting SO_REUSEADDR...OK. MUlticase Member ship added [ 34.725000] br_stp_enable_port: wl1 [ 34.728000] br0: port 1(wl1) entered listening state [ 34.733000] br0: port 1(wl1) entered listening state [ 34.825000] [wl1] link blocked [ 34.828000] NETDEV_CHANGEBLOCK is received for wl1 [ 34.833000] [wl1] link unblocked [ 34.836000] br_stp_disable_port: wl1 [ 34.840000] br0: port 1(wl1) entered disabled state [ 34.857000] check carrier for: wl1 [ 34.869000] NETDEV_CHANGEBLOCK is received for wl1 [ 34.874000] br_stp_enable_port: wl1 [ 34.877000] br0: port 1(wl1) entered listening state [ 34.882000] br0: port 1(wl1) entered listening state RTNETLINK answers: No such process RTNETLINK answers: No such file or directory STATRTING Device Monitor [ 35.860000] check carrier for: wl1 RTNETLINK answers: File exists RTNETLINK answers: File exists devicemonitor:error:36.860:main:850:Message type 10000250 received devicemonitor:error:36.861:main:850:Message type 100007c0 received devicemonitor:error:36.861:main:850:Message type 100007c0 received devicemonitor:error:36.861:main:850:Message type 100007c0 received devicemonitor:error:36.861:main:850:Message type 100007c0[ 36.889000] br0: port 1(wl1) entered learning state received BCM963268 Broadband Router fus:error:37.456:getDeviceInfo:1392:Model Name ===[ER115] fus:error:37.458:main:843:=========== FUS started ============== fus:error:37.458:main:857:====>>> FUS action changed from 'Undefined' to 'FUS_ACTION_EXIT' tr143EchoCfgServer:error:37.649:setupConfig:162:failed to get lock, ret=9809 tr143EchoCfgServer:error:37.649:main:410:setupConfig error ret=-1 1594:error:38.220:main:1242:FUS is exiting [ 38.531000] br_stp_disable_port: wl1 [ 38.534000] br0: port 1(wl1) entered disabled state tr69c:error:39.309:updateTr69cCfgInfo_igd:1028:could not build full path to (null) tr69c:error:39.309:oalTms_parseXSIDateTime:37:Invalid input arguments. Exit oalTms_parseXSIDateTime tr69c:error:39.309:updateTr69cCfgInfo_igd:1127:Invalid periodic Timebase in datamodel [ 39.828000] [ 39.828000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 [ 40.676000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 br_stp_enable_port: wl1 [ 41.017000] br0: port 1(wl1) entered listening state [ 41.022000] br0: port 1(wl1) entered listening state [ 42.051000] [ 42.051000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 [ 43.024000] br0: port 1(wl1) entered learning state [ 45.028000] br0: topology change detected, propagating [ 45.032000] br0: port 1(wl1) entered forwarding state [ 45.038000] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 46.133000] device wl0.1 entered promiscuous mode [ 46.197000] br_stp_enable_port: wl0.1 [ 46.200000] br0: port 2(wl0.1) entered listening state [ 46.205000] br0: port 2(wl0.1) entered listening state [ 46.236000] [wl0.1] link blocked [ 46.239000] NETDEV_CHANGEBLOCK is received for wl0.1 [ 46.245000] [wl0.1] link unblocked [ 46.249000] br_stp_disable_port: wl0.1 [ 46.252000] br0: port 2(wl0.1) entered disabled state [ 46.259000] check carrier for: wl0.1 [ 46.268000] NETDEV_CHANGEBLOCK is received for wl0.1 [ 46.273000] br_stp_enable_port: wl0.1 [ 46.277000] br0: port 2(wl0.1) entered listening state [ 46.282000] br0: port 2(wl0.1) entered listening state [ 46.738000] br_stp_disable_port: wl0.1 [ 46.741000] br0: port 2(wl0.1) entered disabled state [Jan 01 00:00:47] radvd: interface br0 seems to have come back up, trying to reinitialize [Jan 01 00:00:47] radvd: attempting to reread config file [Jan 01 00:00:47] radvd: Warning: AdvRDNSSLifetime <= 2*MaxRtrAdvInterval would allow stale DNS servers to be deleted faster [Jan 01 00:00:47] radvd: resuming normal operation [Jan 01 00:00:47] radvd: Unable to open prefix conf file. error: No such file or directory [Jan 01 00:00:47] radvd: Failed to get updated prefix info details [ 47.867000] [ 47.867000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 [ 48.629000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 br_stp_enable_port: wl0.1 [ 48.643000] br0: port 2(wl0.1) entered listening state [ 48.649000] br0: port 2(wl0.1) entered listening state [ 50.657000] br0: port 2(wl0.1) entered learning state [ 52.664000] br0: topology change detected, propagating [ 52.668000] br0: port 2(wl0.1) entered forwarding state [Jan 01 00:01:03] radvd: received RA from fe80::8275:1fff:feef:a2b1 [ 64.820000] [ 64.820000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 [ 65.692000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 br_stp_disable_port: wl1 [ 67.300000] br0: port 1(wl1) entered disabled state [ 67.346000] DJAIN, DEFAULT [ 67.369000] br_stp_enable_port: wl1 [ 67.372000] br0: port 1(wl1) entered listening state [ 67.377000] br0: port 1(wl1) entered listening state [ 68.399000] DJAIN, DEFAULT [ 69.384000] br0: port 1(wl1) entered learning state [ 69.629000] [ 69.629000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 [ 70.523000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 lansubsysevt:error:70.914:main:1937:============= sent CMS_MSG_MESH_INIT_COMPLETE Message ssk:error:70.921:ssk_main:785: Sky LAN subsystem initialisation completed [ 71.389000] br0: topology change detected, propagating [ 71.393000] br0: port 1(wl1) entered forwarding state sh: plcanalyse: not found ssk:error:72.000:ssk_main:830:Starting tinysvcmdns daemon tinysvcmdns: hostname 80751fefa2b1.local ip c0a80001 set for mdns service [ 74.013000] br_stp_disable_port: wl1 [ 74.016000] br0: port 1(wl1) entered disabled state sh: plcanalyse: not found [ 75.150000] br_stp_enable_port: wl1 [ 75.153000] br0: port 1(wl1) entered listening state [ 75.158000] br0: port 1(wl1) entered listening state sh: plcanalyse: not found [ 77.160000] br0: port 1(wl1) entered learning state [ 77.701000] [ 77.701000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 [ 78.655000] SK_DBG-n Read from SROM/NVRAM srom_eu_edthresh2g=0 srom_eu_edthresh5g=0 [Jan 01 00:01:19] radvd: received RA from fe80::8275:1fff:feef:a2b1 [ 79.164000] br0: topology change detected, propagating [ 79.168000] br0: port 1(wl1) entered forwarding state sh: plcanalyse: not found ===> Called br_mtu.sh with arguments 1 0 sh: plcanalyse: not found ===> Got br0 IP address 192.168.0.1. Will proceed to set ebtable rules and route MTU adsl version 1.2 ADSL PHY: AnnexA version - A2pv6F039m1.d24m sh: plcanalyse: not found [ 84.745000] br_stp_disable_port: wl0.1 [ 84.748000] br0: port 2(wl0.1) entered disabled state [ 85.978000] br_stp_enable_port: wl0.1 [ 85.982000] br0: port 2(wl0.1) entered listening state [ 85.987000] br0: port 2(wl0.1) entered listening state sh: plcanalyse: not found [ 87.992000] br0: port 2(wl0.1) entered learning state sh: plcanalyse: not found [ 89.996000] br0: topology change detected, propagating [ 90.000000] br0: port 2(wl0.1) entered forwarding state sh: plcanalyse: not found sh: plcanalyse: not found [Jan 01 00:01:35] radvd: received RA from fe80::8275:1fff:feef:a2b1 sh: plcanalyse: not found sh: plcanalyse: not found [ 100.892000] device wl0 entered promiscuous mode [ 100.896000] br_stp_enable_port: wl0 [ 100.899000] br0: port 3(wl0) entered listening state [ 100.905000] br0: port 3(wl0) entered listening state [ 100.911000] [wl0] link blocked [ 100.914000] NETDEV_CHANGEBLOCK is received for wl0 [ 100.919000] br_stp_disable_port: wl0 [ 100.919000] [wl0] link unblocked [ 100.926000] br0: port 3(wl0) entered disabled state [ 100.932000] check carrier for: wl0 [ 100.936000] NETDEV_CHANGEBLOCK is received for wl0 [ 100.940000] br_stp_enable_port: wl0 [ 100.944000] br0: port 3(wl0) entered listening state [ 100.949000] br0: port 3(wl0) entered listening state [ 101.933000] check carrier for: wl0 sh: plcanalyse: not found [ 102.952000] br0: port 3(wl0) entered learning state sh: plcanalyse: not found [ 104.957000] br0: topology change detected, propagating [ 104.961000] br0: port 3(wl0) entered forwarding state sh: plcanalyse: not found sh: plcanalyse: not found