ZyXEL LTE5398-M904

[ 64.872000] [RadarStateCheck]Set into RD_SILENCE_MODE! [ 64.900000] MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 1, BandIdx: 0 [ 64.908000] MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 [ 64.924000] MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 1, BandIdx: 0 [ 64.936000] mt7615_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=52, HT-CentCh=54, VHT-CentCh=58 [ 64.952000] mt7615_apply_cal_data() : eeprom 0x52 bit 1 is 0, do runtime cal , skip RX reload [ 64.968000] mt7615_apply_cal_data() : eeprom 0x52 bit 0 is 0, do runtime cal , skip TX reload [ 64.984000] MtCmdChannelSwitch: control_chl = 52,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0 [ 65.004000] BW = 2,TXStream = 4, RXStream = 4, scan(0) [ 65.028000] ap_phy_rrm_init_byRf(): AP Set CentralFreq at 58(Prim=52, HT-CentCh=54, VHT-CentCh=58, BBP_BW=2) [ 65.048000] [WrapDfsRadarDetectStart]: Band0Ch is 52 [ 65.056000] [WrapDfsRadarDetectStart]: Band1Ch is 0 [ 65.068000] RTMPSetLEDStatus: before AndesLedEnhanceOP , status=1, LED_CMD=2! [ 65.080000] AndesLedEnhanceOP: Success! [ 65.088000] Main bssid = d4:1a:d1:XX:XX:XX [ 65.112000] Set_Debug_Proc(): (DebugLevel = 0) [ 65.224000] device rai1 entered promiscuous mode [ 65.248000] device rai2 entered promiscuous mode [ 65.272000] device rai3 entered promiscuous mode [ 70.016000] Enter _VHW_pcmOpen [ 70.016000] [ 70.536000] _VHW_wdtTask is running [ 70.536000] [ 70.536000] Channel 0: Revision Id 0x82(0x0:0x2) [ 70.536000] [ 71.040000] Si3217x_Init_with_Options(484) size = 1 init_opt = 0 [ 71.060000] SiVoice: Channel 0: Type = PROSLIC Rev = 2 [ 71.088000] ProSLIC:loading patch: 05252017 [ 72.784000] Si3217x: Channel 0 : VBAT Up = 58.789 v [ 73.452000] Si3217x: : ProSLIC initialization completed. [ 73.952000] ProSLIC:PCMStart [ 76.020000] 1588291269.204 [crit][vtsp]vtspr_task.c:143 [ 76.020000] D2 Technologies, Inc. [ 76.020000] _ _ __ [ 76.020000] / | '/ /_ _ /_ _ _ /_ _ ._ _ [ 76.020000] /_.'/_ //_'/_ / // //_///_//_///_'_\ [ 76.020000] _/ [ 76.020000] [ 76.020000] Unified Communication Products [ 76.020000] [ 76.092000] 1588291269.280 [crit][vtsp]vtspr_task.c:145 www.d2tech.com [ 76.092000] [ 76.112000] 1588291269.299 [crit][vtsp]vtspr_task.c:146 +D2Tech+ VTSP_RT Herman3_R_2_4_02_Rev516:49144 [ 76.112000] [ 76.136000] [ 76.136000] D2 Technologies, Inc. [ 76.136000] _ _ __ [ 76.136000] / | '/ /_ _ /_ _ _ /_ _ ._ _ [ 76.136000] /_.'/_ //_'/_ / // //_///_//_///_'_\ [ 76.136000] _/ [ 76.136000] [ 76.136000] Unified Communication Products [ 76.136000] [ 76.204000] www.d2tech.com [ 76.204000] [ 76.216000] +D2Tech+ VTSP_RT Herman3_R_2_4_02_Rev516:49144 [ 76.216000] [ 78.256000] 1588291271.440 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.256000] [ 78.272000] 1588291271.458 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.272000] [ 78.292000] 1588291271.478 [debug][vtsp]_vtspr_cmd.c:686 _vtspr_cmd.c:686 [ 78.292000] [ 78.312000] 1588291271.497 [debug][vtsp]_vtspr_cmd.c:687 infc does not exist:1 [ 78.312000] [ 78.332000] 1588291271.517 [debug][vtsp]_vtspr_cmd.c:686 _vtspr_cmd.c:686 [ 78.332000] [ 78.352000] 1588291271.536 [debug][vtsp]_vtspr_cmd.c:687 infc does not exist:1 [ 78.352000] [ 78.372000] 1588291271.556 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.372000] [ 78.388000] 1588291271.576 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.388000] [ 78.408000] 1588291271.596 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.408000] [ 78.428000] 1588291271.616 [debug][vtsp]_vtspr_cmd.c:686 _vtspr_cmd.c:686 [ 78.428000] [ 78.448000] 1588291271.635 [debug][vtsp]_vtspr_cmd.c:687 infc does not exist:1 [ 78.448000] [ 78.468000] 1588291271.655 [debug][vtsp]_vtspr_cmd.c:686 _vtspr_cmd.c:686 [ 78.468000] [ 78.488000] 1588291271.674 [debug][vtsp]_vtspr_cmd.c:687 infc does not exist:1 [ 78.488000] [ 78.508000] 1588291271.694 [debug][vtsp]_vtspr_cmd.c:686 _vtspr_cmd.c:686 [ 78.508000] [ 78.528000] 1588291271.713 [debug][vtsp]_vtspr_cmd.c:687 infc does not exist:1 [ 78.528000] [ 78.548000] 1588291271.733 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.548000] [ 78.568000] 1588291271.753 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.568000] [ 78.588000] 1588291271.773 [debug][vtsp]_vtspr_cmd.c:686 _vtspr_cmd.c:686 [ 78.588000] [ 78.604000] 1588291271.792 [debug][vtsp]_vtspr_cmd.c:687 infc does not exist:1 [ 78.604000] [ 78.624000] 1588291271.812 [debug][vtsp]_vtspr_cmd.c:686 _vtspr_cmd.c:686 [ 78.624000] [ 78.644000] 1588291271.831 [debug][vtsp]_vtspr_cmd.c:687 infc does not exist:1 [ 78.644000] [ 78.664000] 1588291271.851 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.664000] [ 78.684000] 1588291271.871 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.684000] [ 78.704000] 1588291271.891 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.704000] [ 78.724000] 1588291271.910 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.724000] [ 78.744000] 1588291271.930 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.744000] [ 78.764000] 1588291271.950 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.764000] [ 78.784000] 1588291271.969 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.784000] [ 78.804000] 1588291271.989 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.804000] [ 78.824000] 1588291272.009 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.824000] [ 78.844000] 1588291272.029 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.844000] [ 78.860000] 1588291272.048 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.860000] [ 78.880000] 1588291272.068 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.880000] [ 78.900000] 1588291272.088 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.900000] [ 78.920000] 1588291272.107 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=15 [ 78.920000] [ 78.940000] 1588291272.127 [debug][vtsp]_vtspr_cmd.c:85 command VTSP code=17 [ 78.940000] [ 79.060000] Enable GDMA Controller Module [ 79.060000] [ 79.072000] GDMA IP Version=3 [ 79.072000]

=================================================================== MT7621 stage1 code 10:33:11 (ASIC) CPU=50000000 HZ BUS=16666666 HZ ================================================================== Change MPLL source from XTAL to CR... do MEMPLL setting.. MEMPLL Config : 0x31100000 3PLL mode + External loopback === XTAL-40Mhz === DDR-800Mhz === PLL4 FB_DL: 0x8, 1/0 = 566/458 21000000 PLL3 FB_DL: 0xa, 1/0 = 613/411 29000000 PLL2 FB_DL: 0x12, 1/0 = 625/399 49000000 do DDR setting..[00320381] Apply DDR3 Setting...(use customer AC) 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 -------------------------------------------------------------------------------- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 000F:| 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0010:| 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0011:| 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 rank 0 coarse = 16 rank 0 fine = 56 B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 opt_dle value:10 DRAMC_R0DELDLY[018]=00002C2C ================================================================== RX DQS perbit delay software calibration ================================================================== 1.0-15 bit dq delay value ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 11 10 10 13 11 11 11 8 9 9 10 | 10 12 11 11 10 12 -------------------------------------- ================================================================== 2.dqs window x=pass dqs delay value (min~max)center y=0-7bit DQ of every group input delay:DQS0 =44 DQS1 = 44 ================================================================== bit DQS0 bit DQS1 0 (1~85)43 8 (1~84)42 1 (1~85)43 9 (1~84)42 2 (1~84)42 10 (1~84)42 3 (1~87)44 11 (1~82)41 4 (1~87)44 12 (1~86)43 5 (1~87)44 13 (1~85)43 6 (1~86)43 14 (1~87)44 7 (1~86)43 15 (1~86)43 ================================================================== 3.dq delay value last ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 12 11 12 13 11 11 12 9 11 11 10 | 12 15 12 12 10 13 ================================================================== ================================================================== TX perbyte calibration ================================================================== DQS loop = 15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2 DQ loop=15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2 byte:0, (DQS,DQ)=(8,8) byte:1, (DQS,DQ)=(8,8) 20,data:88 [EMI] DRAMC calibration passed =================================================================== MT7621 stage1 code done CPU=50000000 HZ BUS=16666666 HZ =================================================================== U-Boot 1.1.3 (Mar 18 2020 - 14:54:49) Board: Ralink APSoC DRAM: 256 MB relocate_code Pointer at: 8ff94000 Config XHCI 40M PLL ****************************** Software System Reset Occurred ****************************** Allocate 16 byte aligned buffer: 8ffcb1b0 Enable NFI Clock # MTK NAND # : Use HW ECC NAND ID [C2 F1 80 95 02] Device found in MTK table, ID: c2f1, EXT_ID: 809502 Support this Device in MTK table! c2f1 select_chip [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16 Signature matched and data read! load_fact_bbt success 1023 load fact bbt success [mtk_nand] probe successfully! mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8 ..============================================ Ralink UBoot Version: 5.0.0.0 -------------------------------------------- ASIC MT7621A DualCore (MAC to MT7530 Mode) DRAM_CONF_FROM: Auto-Detection DRAM_TYPE: DDR3 DRAM bus: 16 bit Xtal Mode=3 OCP Ratio=1/3 Flash component: 128 MBytes NOR Flash with NAND boot partition size Date:Mar 18 2020 Time:14:54:49 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 880 MHZ #### estimate memory size =256 Mbytes #Reset_MT7530 .## Starting application at 0x8402A800 ... Z-LOADER V1.31 | 03/18/2020 14:54:53 Hit ESC key to stop autoboot: 1 Zyxel TRX Image 1 --> Found! Header Checksum OK ============ZyXEL header information================== chipId : MT7621A boardId : LTE5398-M904 modelId : 05 03 09 08 kernel_len : (2967978) kernelChksum : (0x12345678) swVersionInt : OpenWrt-r24055+2-fa30c3144d swVersionExt : OpenWrt-r24055+2-fa30c3144d Zyxel TRX Image 2 --> Found! Header Checksum OK ============ZyXEL header information================== chipId : MT7621A boardId : LTE5398-M904 modelId : 05 03 09 08 kernel_len : (5603237) kernelChksum : (0x12345678) swVersionInt : 9.99(ABQU.1)OpenWrt-recovery swVersionExt : 9.99(ABQU.1)OpenWrt-recovery ================================================= Check image validation: Image1 Header Magic Number --> OK Image2 Header Magic Number --> OK Image1 Header Checksum --> OK Image2 Header Checksum --> OK Image1 Data Checksum --> ..............................................OK Image2 Data Checksum --> ........................ranand_read: skip reading a fact bad block 22c0000 -> 22e0000 ..............................................................OK Image1 Stable Flag --> Not stable Image1 Try Counter --> 0 Image1: OK Image2: OK ..Erasing NAND Flash... ranand_erase: start:80000, len:20000 .Writing to NAND Flash... done ================================================= NetLoop,call eth_halt ! NetLoop,call eth_init ! Trying Eth0 (10/100-M) Waitting for RX_DMA_BUSY status Start... done ETH_STATE_ACTIVE!! Multiboot Listening... 6dest_port error 5dest_port error 3dest_port error 0 ## Booting image at bc14017c ... ..Erasing NAND Flash... ranand_erase: start:80000, len:20000 .Writing to NAND Flash... done Image Name: MIPS OpenWrt Linux-5.15.132 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 2967914 Bytes = 2.8 MB Load Address: 80001000 Entry Point: 80001000 .............................................. Verifying RAS Image Checksum ... ..Erasing NAND Flash... ranand_erase: start:80000, len:20000 .Writing to NAND Flash... done OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80001000) ... ## Giving linux memsize in MB, 256 Starting kernel ... [ 0.000000] Linux version 5.15.132 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24054-fe10f97439) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Fri Sep 29 23:37:42 2023 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is ZyXEL LTE5398-M904 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] percpu: Embedded 11 pages/cpu s14736 r8192 d22128 u45056 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00004a40 [ 0.000000] Readback ErrCtl register=00004a40 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 248484K/262144K available (7310K kernel code, 626K rwdata, 1492K rodata, 1248K init, 226K bss, 13660K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000005] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns [ 0.016045] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.088331] pid_max: default: 32768 minimum: 301 [ 0.098303] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.112735] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.132513] rcu: Hierarchical SRCU implementation. [ 0.142913] smp: Bringing up secondary CPUs ... [ 0.152800] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.152832] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.152849] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.152902] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.212365] Synchronize counters for CPU 1: done. [ 0.274998] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.275023] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.275035] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.275062] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.333846] Synchronize counters for CPU 2: done. [ 0.394358] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.394384] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.394396] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.394430] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.453442] Synchronize counters for CPU 3: done. [ 0.513057] smp: Brought up 1 node, 4 CPUs [ 0.526345] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.545873] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.559883] pinctrl core: initialized pinctrl subsystem [ 0.571991] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.584580] thermal_sys: Registered thermal governor 'step_wise' [ 0.622271] clocksource: Switched to clocksource GIC [ 0.633602] NET: Registered PF_INET protocol family [ 0.643421] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.658860] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.675453] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.690768] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.705983] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.720178] TCP: Hash tables configured (established 2048 bind 2048) [ 0.732954] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.745885] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.760130] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.771349] PCI: CLS 0 bytes, default 32 [ 0.782592] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 0.800919] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.812487] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.833628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.853220] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.864824] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.876265] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.887958] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: [ 0.901239] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff] [ 0.918693] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 0.934926] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 [ 1.302277] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 1.316072] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 1.325711] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 1.335414] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 1.349571] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 1.362104] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.372987] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 1.386676] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.398952] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 1.410832] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 1.423275] pci 0000:00:00.0: reg 0x14: [mem 0x60400000-0x6040ffff] [ 1.435776] pci 0000:00:00.0: supports D1 [ 1.443645] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.455977] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 1.467904] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 1.480285] pci 0000:00:01.0: reg 0x14: [mem 0x60410000-0x6041ffff] [ 1.492819] pci 0000:00:01.0: supports D1 [ 1.500647] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 1.514321] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 [ 1.526269] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 1.538784] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.552105] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.562460] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 1.574507] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 1.587976] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 1.602330] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.615744] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280 [ 1.627651] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit] [ 1.641237] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 1.671928] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 1.682302] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 1.694326] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 1.707798] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 1.722151] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.735384] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 1.748437] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 1.762251] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 1.775376] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 1.789213] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 1.802694] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 1.817030] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] [ 1.830502] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] [ 1.844847] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] [ 1.858336] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] [ 1.871816] pci 0000:00:00.0: BAR 7: assigned [io 0x0000-0x0fff] [ 1.883900] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.896012] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] [ 1.909485] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.919327] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 1.931428] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 1.944896] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 1.959251] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit] [ 1.973764] pci 0000:00:01.0: PCI bridge to [bus 02] [ 1.983617] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 1.995697] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 2.009181] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 2.025436] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 2.044083] printk: console [ttyS0] disabled [ 2.052679] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 2.070624] printk: console [ttyS0] enabled [ 2.070624] printk: console [ttyS0] enabled [ 2.087147] printk: bootconsole [early0] disabled [ 2.087147] printk: bootconsole [early0] disabled [ 2.110144] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1 [ 2.122897] nand: Macronix MX30LF1G18AC [ 2.130525] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.145615] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits [ 2.158785] 10 fixed-partitions partitions found on MTD device mt7621-nand [ 2.172502] Creating 10 MTD partitions on "mt7621-nand": [ 2.183121] 0x000000000000-0x000000080000 : "Bootloader" [ 2.200286] 0x000000080000-0x000000100000 : "Config" [ 2.216660] 0x000000100000-0x000000140000 : "Factory" [ 2.230670] 0x000000140000-0x000002000000 : "Kernel" [ 2.550425] 0x000000540000-0x000002000000 : "ubi" [ 2.830201] 0x000002140000-0x000004000000 : "Kernel2" [ 3.150407] 0x000004000000-0x000004100000 : "wwan" [ 3.171524] 0x000004100000-0x000005100000 : "data" [ 3.343579] 0x000005100000-0x000005200000 : "rom-d" [ 3.364912] 0x000005200000-0x000005280000 : "reserve" [ 3.526180] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module [ 3.547799] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22 [ 3.566575] i2c_dev: i2c /dev entries driver [ 3.578874] NET: Registered PF_INET6 protocol family [ 3.591710] Segment Routing with IPv6 [ 3.599173] In-situ OAM (IOAM) with IPv6 [ 3.607124] NET: Registered PF_PACKET protocol family [ 3.617335] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.643733] 8021q: 802.1Q VLAN Support v1.8 [ 3.658562] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module [ 3.689717] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode [ 3.704343] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx [ 3.713142] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=24) [ 3.743482] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=25) [ 3.766864] DSA: tree 0 setup [ 3.776327] UBI: auto-attach mtd4 [ 3.783037] ubi0: attaching mtd4 [ 4.327135] ubi0: scanning is finished [ 4.351416] ubi0: attached mtd4 (name "ubi", size 26 MiB) [ 4.362316] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.376043] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.389571] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.403441] ubi0: good PEBs: 213, bad PEBs: 1, corrupted PEBs: 0 [ 4.415406] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 4.429805] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 92802140 [ 4.447655] ubi0: available PEBs: 0, total reserved PEBs: 213, PEBs reserved for bad PEB handling: 19 [ 4.466066] ubi0: background thread "ubi_bgt0d" started, PID 289 [ 4.468038] block ubiblock0_0: created from ubi0:0(rootfs) [ 4.489092] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 4.511388] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 4.531986] Freeing unused kernel image (initmem) memory: 1248K [ 4.543946] This architecture does not have kernel memory protection. [ 4.556808] Run /sbin/init as init process [ 5.004552] init: Console is alive [ 5.011801] init: - watchdog - [ 5.905369] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.974099] usbcore: registered new interface driver usbfs [ 5.985330] usbcore: registered new interface driver hub [ 5.996146] usbcore: registered new device driver usb [ 6.018552] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator [ 6.033732] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator [ 6.049282] xhci-mtk 1e1c0000.xhci: xHCI Host Controller [ 6.059946] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1 [ 6.080065] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010 [ 6.098428] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000 [ 6.110186] xhci-mtk 1e1c0000.xhci: xHCI Host Controller [ 6.120796] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2 [ 6.135718] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed [ 6.149629] hub 1-0:1.0: USB hub found [ 6.157390] hub 1-0:1.0: 2 ports detected [ 6.166549] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.184010] hub 2-0:1.0: USB hub found [ 6.191669] hub 2-0:1.0: 1 port detected [ 6.208109] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 6.228829] init: - preinit - [ 7.062984] random: jshn: uninitialized urandom read (4 bytes read) [ 7.188832] random: jshn: uninitialized urandom read (4 bytes read) [ 7.229480] random: jshn: uninitialized urandom read (4 bytes read) [ 7.529840] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 7.552536] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 7.552798] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode [ 7.584054] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 9.772551] random: procd: uninitialized urandom read (4 bytes read) [ 9.788407] UBIFS (ubi0:1): default file-system created [ 9.800224] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 9.811881] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 423 [ 9.938476] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 9.954137] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 9.973881] UBIFS (ubi0:1): FS size: 18665472 bytes (17 MiB, 147 LEBs), max 157 LEBs, journal size 1015809 bytes (0 MiB, 7 LEBs) [ 9.996911] UBIFS (ubi0:1): reserved for root: 881615 bytes (860 KiB) [ 10.009735] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID F18FA0C6-EF04-42C5-B5F6-BE7DF41AF7F9, small LPT model [ 10.035977] mount_root: overlay filesystem has not been fully initialized yet [ 10.051051] mount_root: switching to ubifs overlay [ 10.069329] urandom-seed: Seed file not found (/etc/urandom.seed) [ 10.177443] procd: - early - [ 10.183612] procd: - watchdog - [ 10.809740] procd: - watchdog - [ 10.816966] procd: - ubus - [ 10.910409] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.975630] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.989045] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.008992] procd: - init - Please press Enter to activate this console. [ 11.705823] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.741377] mtk-eip93 1e004000.crypto: EIP93 Crypto Engine Initialized. [ 11.949748] usbcore: registered new interface driver cdc_wdm [ 11.962715] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f [ 11.977169] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8 [ 12.015253] usbcore: registered new interface driver usbserial_generic [ 12.028803] usbserial: USB Serial support registered for generic [ 12.304528] pci 0000:00:01.0: enabling device (0000 -> 0003) [ 12.315925] mt7615e 0000:02:00.0: enabling device (0000 -> 0002) [ 12.330069] mt7615e 0000:02:00.0: Invalid MAC address, using random address 02:9e:16:7b:a9:d6 [ 12.373692] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a [ 12.373692] [ 12.468760] PPP generic driver version 2.4.2 [ 12.482520] NET: Registered PF_PPPOX protocol family [ 12.496827] usbcore: registered new interface driver qmi_wwan [ 12.525114] usbcore: registered new interface driver option [ 12.536635] usbserial: USB Serial support registered for GSM modem (1-port) [ 12.563224] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.739207] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649 [ 12.849403] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190415154149 [ 13.143775] urngd: v1.0.2 started. [ 13.774635] random: jshn: uninitialized urandom read (4 bytes read) [ 13.892496] random: jshn: uninitialized urandom read (4 bytes read) [ 13.943925] random: jshn: uninitialized urandom read (4 bytes read) [ 13.952901] random: crng init done [ 13.963333] random: 31 urandom warning(s) missed due to ratelimiting [ 36.445412] mtk_soc_eth 1e100000.ethernet eth0: Link is Down [ 36.474815] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 36.491085] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 36.495011] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode [ 36.523145] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 36.536909] br-lan: port 1(lan1) entered blocking state [ 36.547539] br-lan: port 1(lan1) entered disabled state [ 36.559868] device lan1 entered promiscuous mode [ 36.569203] device eth0 entered promiscuous mode [ 36.610463] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode [ 36.626586] br-lan: port 2(lan2) entered blocking state [ 36.637168] br-lan: port 2(lan2) entered disabled state [ 36.649642] device lan2 entered promiscuous mode [ 39.449314] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off [ 39.464921] br-lan: port 1(lan1) entered blocking state [ 39.475370] br-lan: port 1(lan1) entered forwarding state [ 39.487816] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready BusyBox v1.36.1 (2023-09-28 23:18:26 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt SNAPSHOT, r24055+2-fa30c3144d ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:/#