TP-Link TL-WR1041ND

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

The TL-WR1041N/ND is a Low-Cost Gigabit Ethernet 2.4Ghz-band dual-stream (2×2) 300mbps wireless router.

→ Install OpenWrt (generic explanation)

Please add the installation procedure here.

Install -factory.bin as shown above using the “Firmware Upgrade” page of web interface of the original firmware.

Architecture	MIPS
Vendor	Qualcomm Atheros
bootloader	U-Boot
System-On-Chip	Atheros AR9342
CPU/Speed	525 MHz
Flash-Chip	cFeon Q32B-104HIP
Flash size	4096 KiB
RAM	Winbond W9425G6JH-5
Wireless	Atheros AR9340
Ethernet	Atheros (integrated)
Switch	Atheros AR8327
USB	Mod
Serial	Yes
JTAG	Yes

Main PCB:

Serial/TTL Port:

Blank USB Header:

How to add tags

GigabitEthernet, 5Port, 1NIC, 1WNIC, JTAG, 802.11abgn, ath9k, AR9342, 2Ant, 2x2, 32RAM, 4Flash, DB120

gigabitethernet 5port 1nic 1wnic jtag 802.11abgn ath9k ar9342 2ant 2x2 32RAM 4Flash db120

TP-Link TL-WR1041ND

Supported Versions

Hardware Highlights

Installation

OEM easy installation

Hardware

Photos

Tags