Show pagesourceOld revisionsBacklinksBack to top × Table of Contents TP-Link Archer C25 v1 Supported Versions Hardware Highlights Installation Supporting activities Hardware Info Photos Opening the case Serial Bootlogs OEM bootlog OpenWrt bootlog Notes Tags TP-Link Archer C25 v1 Under Construction! This page is currently under construction. You can edit the article to help completing it. Also known as “AC900 Wireless Dual Band Router Archer C25” Wi-Fi over dual 5GHz (433Mbps) and 2.4GHz (450Mbps) bands Supported Versions BrandModelVersionCurrent ReleaseOEM InfoForum TopicTechnical DataTP-LinkArcher C25v122.03.5https://www.tp-link.com/en/home-networking/wifi-router/archer-c25/View/Edit data Hardware Highlights ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSBArcher C25v1Qualcomm Atheros QCA9561775864Qualcomm Atheros QCA9561, Qualcomm Atheros QCA9887b/g/na/n/ac5-- Installation ModelVersionCurrent ReleaseFirmware OpenWrt InstallFirmware OpenWrt UpgradeFirmware OEM StockArcher C25v122.03.5https://downloads.openwrt.org/releases/22.03.5/targets/ath79/generic/openwrt-22.03.5-ath79-generic-tplink_archer-c25-v1-squashfs-factory.binhttps://downloads.openwrt.org/releases/22.03.5/targets/ath79/generic/openwrt-22.03.5-ath79-generic-tplink_archer-c25-v1-squashfs-sysupgrade.binhttps://www.tp-link.com/en/support/download/archer-c25/v1/ → Install OpenWrt (generic explanation) Download the factory installation image Verify the downloaded file Upload the image to the router via stock firmware upgrade menu Wait until the router finishes flashing and boots into OpenWRT Supporting activities Gluon Issue Tracker: https://github.com/freifunk-gluon/gluon/issues/1123 Hardware Info Architecture mips_24kc Vendor TP-Link Bootloader EXAMPLE U-Boot System-On-Chip Qualcomm Atheros QCA9561 - MIPS 74Kc V5.0 CPU/Speed 775 MHz Flash-Chip Winbond 25Q64FVSIG Flash size 8 MiB RAM-Chip Winbond W9751G6KB-25 RAM 64 MiB Wireless WLAN 2.4GHz: b/g/n; WLAN 5.0GHz: a/n/ac WLAN Chips Qualcomm Atheros QCA9561 (3×3 MIMO 2.4GHz b/g/n) Qualcomm Atheros QCA9887 (1×1 MIMO 5GHz a/n/ac) Ethernet 10/100 Mbit/s with VLAN support USB No Serial Yes JTAG Not populated Photos can someone insert the fotos from my links? I don't have the rights to upload pictures. As long as you are logged in, you do have rights to upload photos, but only to the media namespace. See https://openwrt.org/meta/adding_images_to_openwrt_wiki --- tmomas 2017/06/20 12:09 Insert photo of front of the casing https://drive.google.com/open?id=0B3si4A62DiNFV2lfUEU0dV83QkU Insert photo of back of the casing https://drive.google.com/open?id=0B3si4A62DiNFTjF4Y0JzLVg1X2s Insert photo of backside label PCB Chips Opening the case There are 2 screws with PH1 head at the bottom of the case (freely accessible). After unscrewing, You need to open all the latches (12 in total) around the case. They are holding well and the edges of top and bottom case parts make their unlatching harder. Serial → port.serial general information about the serial port, serial port cable, etc. Voltage levels (3.3V or 5V - I am not sure about the levels of the converter I used). There is unpopulated header with 2.54mm pitch at the edge of the PCB. Serial connection parameters for TP-Link Archer C25 v1 115200, 8N1 Bootlogs OEM bootlog COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE OpenWrt bootlog COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING Notes Tags How to add tags QCA9561, 8Flash, 64RAM This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.OKMore information about cookies qca9561 8Flash 64RAM Last modified: 2021/04/18 11:29by tmomas