Techdata: Dynalink DL-WRX36

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi Router
Brand:
Dynalink
Model:
DL-WRX36
FCCID:
https://fcc.io/H8NRT5010W-D350
Availability:
Discontinued
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=26c095cb4d27428acedf1b738507a585f1585fe4
Supported Since Rel:
23.05.0
Supported Current Rel:
24.10.2
Gluon support:
No
Target:
qualcommax
Subtarget:
ipq807x
Package architecture:
aarch64_cortex-a53
Bootloader:
U-Boot
CPU:
Qualcomm IPQ8072A
CPU Cores:
4
CPU MHz:
2200
Flash MB:
256NAND
RAM MB:
1024
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
4
Ethernet 2.5Gbit ports:
1
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
Qualcomm Atheros QCA8075
VLAN:
Yes
Modem:
-
Comments network ports:
Qualcomm Atheros QCA8081 2.5G Phy
WLAN Hardware:
Qualcomm QCN5024, Qualcomm QCN5054
WLAN 2.4GHz:
b/g/n/ax
WLAN 5.0GHz:
a/n/ac/ax
WLAN 6.0GHz:
-
WLAN 60.0GHz:
-
WLAN Comments:
OFDMA + MU-MIMO, 2.4GHz 2×2/40MHz, 5GHz 4×4/80 or 2×2/160MHz
WLAN driver:
ath11k
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
none
USB ports:
1x 3.0
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
3.3
JTAG:
¿
LED count:
1
Button count:
2
GPIOs:
-
Power Supply:
12V, 2.5A via barrel
Outdoor:
No
OpenVPN performance:
¿
Wireguard performance:
¿
Device Page:
dl-wrx36
OWrt Forum Topic URL:
https://forum.openwrt.org/t/dynalink-dl-wrx36-askey-rt5010w-ipq8072a-openwrt-support/110454/
OEM Device Homepage URL:
https://dynalink.life/products/wifi-router
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/24.10.2/targets/qualcommax/ipq807x/openwrt-24.10.2-qualcommax-ipq807x-dynalink_dl-wrx36-initramfs-uImage.itb
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/24.10.2/targets/qualcommax/ipq807x/openwrt-24.10.2-qualcommax-ipq807x-dynalink_dl-wrx36-squashfs-sysupgrade.bin
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-dynalink_dl-wrx36-initramfs-uImage.itb
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-dynalink_dl-wrx36-squashfs-sysupgrade.bin
Installation method(s):
CLI generic
Comment installation:
Install is 2-stage: initramfs image, then factory image
Recovery method(s):
CLI generic, Serial, USB
Comment recovery:
See doc page for USB recovery commands from OpenWrt image
Picture:
picture: 51hzqwx62wl._ac_sl1500_.jpg
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2025/06/29 05:41
  • by kjoshj