ZyXEL VMG1312-B10B

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

Not supported.

CPU	Ram	Flash	Network	WLAN	USB	Serial	JTag
Broadcom BCM63168 (BCM63168UKFEBG @ 400 MHz	512 MiB	512 MiB	4x 10/100	bgn	1x 2.0	Yes	?

Architecture	MIPS 4350
Vendor	Broadcom
Bootloader	U-Boot
System-On-Chip	Broadcom BCM63168UKFEBG
CPU/Speed	400 MHz
Flash-Chip	TC58NVM9S3ETA00
Flash size	512 MiB
RAM	512 MiB
Wireless	EXAMPLE RT2860v2 2.4GHz 802.11bgn
Ethernet	EXAMPLE 10/100 Mbit/s w/ vlan support
USB	EXAMPLE 1x 2.0
Serial	EXAMPLE Yes
JTAG	EXAMPLE Not populated

Case

PCB

Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, …

→ port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

Replace EXAMPLE by real values.

Serial connection parameters for ZyXEL VMG1312-B10B 1	EXAMPLE 115200, 8N1

→ port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING

How to add tags

bcm63xx, bcm63168, bcm63268, 512NAND, 512ram, Unsupported devices

bcm63xx bcm63168 bcm63268 512nand 512ram Unsupported devices

ZyXEL VMG1312-B10B

OpenWrt support

Hardware highlights

Hardware

Info

Photos

Opening the case

Serial

JTAG

Bootlogs

OEM bootlog

OpenWrt bootlog

Notes

Tags