Ubiquiti Powerbeam 5AC
Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.
Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP>
that encloses it.
Getting started with a new Device Page
- This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
- There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
- When there are no more “fixme” tags left, delete this one too, along with the
<WRAP>
that encloses it.
Keep the articles modular
- Please include only model specific information, omit bla,bla and put everything generic into separate articles
- If you have no time to write certain stuff, link to docs
- base-system should lead the way, do not explain this again
- DO NOT provide a complete howto here! Instead groom the general documentation.
Supported Versions
Hardware Highlights
Installation
- PowerBeam 5AC Gen2 → Common Procedures for Ubiquiti Products (WA-type)
- PowerBeam 5AC 500 → Common Procedures for Ubiquiti Products (XC-type)
- PBE-5AC-500-ISO → Common Procedures for Ubiquiti Products (XC-type)
Flash Layout
Find out flash layout, then add the flash layout table here (copy, paste, modify the example).
Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.
OEM easy installation
The instructions below are for Broadcom devices and only serve as an example.
Remove / modify them if they do not apply to this particular device!
This section deals with
- How you install OpenWrt from a device freshly opened
- The steps required such as reset to factory defaults if the device has already been configured
Note: Reset router to factory defaults if it has been previously configured.
- Browse to
http://192.168.1.1/Upgrade.asp
- Upload .bin file to router
- Wait for it to reboot
- Telnet to 192.168.1.1 and set a root password, or browse to
http://192.168.1.1
if LuCI is installed.
OEM installation using the TFTP method
Specific values needed for tftp
Enter values for “FILL-IN” below
Bootloader tftp server IPv4 address | FILL-IN |
---|---|
Bootloader MAC address (special) | FILL-IN |
Firmware tftp image | Latest OpenWrt release (NOTE: Name must contain “tftp”) |
TFTP transfer window | FILL-IN seconds |
TFTP window start | approximately FILL-IN seconds after power on |
TFTP client required IP address | FILL-IN |
Upgrading OpenWrt
These are generic instructions. Update with your router's specifics.
LuCI Web Upgrade Process
- Browse to
http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/
LuCI Upgrade URL - Upload image file for sysupgrade to LuCI
- Wait for reboot
Terminal Upgrade Process
If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:
sysupgrade
mtd
Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
sysupgrade
- Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc sysupgrade /tmp/xxx.abc
mtd
If sysupgrade
does not support this router, use mtd
.
- Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc mtd write /tmp/xxx.abc linux && reboot
Debricking
Failsafe mode
Basic configuration
→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.
Specific Configuration
Please fill in real values for this device, then remove the EXAMPLEs
Network interfaces
The default network configuration is:
Interface Name | Description | Default configuration |
---|---|---|
br-lan | EXAMPLE LAN & WiFi | EXAMPLE 192.168.1.1/24 |
vlan0 (eth0.0) | EXAMPLE LAN ports (1 to 4) | EXAMPLE None |
vlan1 (eth0.1) | EXAMPLE WAN port | EXAMPLE DHCP |
wl0 | EXAMPLE WiFi | EXAMPLE Disabled |
Buttons
→ hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.
The Ubiquiti Powerbeam 5AC model has the following buttons:
BUTTON | Event |
---|---|
Reset | reset |
Hardware
Info
Photos
Front:
Insert photo of front of the casing
Back:
Insert photo of back of the casing
Backside label:
Insert photo of backside label
Opening the case
Note: This will void your warranty!
Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...
- To remove the cover and open the device, do a/b/c
Main PCB:
Insert photo of PCB
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port
Serial connection parameters for Ubiquiti Powerbeam 5AC | 115200, 8N1 |
---|
JTAG
→ port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port
Bootlogs
OEM bootlog
airOS 8.0 RC2 dmesg
XC.v8.0-RC2.31956.161118.1914# dmesg [ 0.000000] Linux version 2.6.32.68 (atlbamboo@builder) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 unknown) ) #1 Fri Nov 18 19:18:01 EET 2016 [ 0.000000] flash_size passed from bootloader = 16 [ 0.000000] arg 1: console=ttyS0,115200 [ 0.000000] arg 2: rootfstype=squashfs [ 0.000000] arg 3: init=/init [ 0.000000] arg 4: mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),14720k(rootfs),256k(cfg),64k(EEPROM) [ 0.000000] arg 5: mem=128M [ 0.000000] cpu apb ddr apb ath_sys_frequency: cpu 720 ddr 600 ahb 200 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019750 (MIPS 74Kc) [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] User-defined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00008000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00008000 [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat 8029a9c0, node_mem_map 81000000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs init=/init mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),14720k(rootfs),256k(cfg),64k(EEPROM) mem=128M [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 126620k/131072k available (2164k kernel code, 4280k reserved, 496k data, 144k init, 0k highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:128 [ 0.000000] plat_time_init: plat time init done [ 0.000000] Console: colour dummy device 80x25 [ 0.001000] Calibrating delay loop... 359.42 BogoMIPS (lpj=179712) [ 0.020000] Mount-cache hash table entries: 512 [ 0.022000] NET: Registered protocol family 16 [ 0.023000] ath_pcibios_init: bus 0 [ 0.024000] ath_pcibios_init(232): PCI 0 CMD write: 0x356 [ 0.025000] registering PCI controller with io_map_base unset [ 0.026000] ath_pcibios_init: bus 1 [ 0.027000] ***** Warning PCIe 1 H/W not found !!! [ 0.028000] registering PCI controller with io_map_base unset [ 0.029000] bio: create slab <bio-0> at 0 [ 0.030000] pci 0000:00:00.0: reg 10 64bit mmio: [0x000000-0x1fffff] [ 0.030000] pci 0000:00:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.030000] pci 0000:00:00.0: supports D1 D2 [ 0.030000] pcibios_map_irq: IRQ 75 for bus 0 [ 0.031000] Switching to clocksource MIPS [ 0.032000] NET: Registered protocol family 2 [ 0.036000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.043000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.050000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.056000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.062000] TCP reno registered [ 0.065000] NET: Registered protocol family 1 [ 0.069000] ATH GPIOC major 0 [ 0.072000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.078000] msgmni has been set to 247 [ 0.082000] io scheduler noop registered [ 0.085000] io scheduler deadline registered (default) [ 0.093000] HS UART step 0x54e scale 0x8 for 115200 [ 0.097000] Serial: Atheros High-Speed UART (115200) [ 0.102000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.108000] serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A [ 0.115000] console [ttyS0] enabled, bootconsole disabled [ 0.126000] 6 cmdlinepart partitions found on MTD device ath-nor0 [ 0.132000] Creating 6 MTD partitions on "ath-nor0": [ 0.137000] 0x000000000000-0x000000040000 : "u-boot" [ 0.143000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.148000] 0x000000050000-0x000000150000 : "kernel" [ 0.154000] 0x000000150000-0x000000fb0000 : "rootfs" [ 0.159000] mtd: partition "rootfs" set to be root filesystem [ 0.165000] 0x000000fb0000-0x000000ff0000 : "cfg" [ 0.170000] 0x000000ff0000-0x000001000000 : "EEPROM" [ 0.175000] i2c /dev entries driver [ 0.179000] u32 classifier [ 0.181000] Performance counters on [ 0.185000] input device check on [ 0.189000] Actions configured [ 0.193000] IPv4 over IPv4 tunneling driver [ 0.197000] TCP cubic registered [ 0.201000] NET: Registered protocol family 10 [ 0.206000] IPv6 over IPv4 tunneling driver [ 0.210000] NET: Registered protocol family 17 [ 0.215000] Bridge firewalling registered [ 0.219000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 0.226000] All bugs added by David S. Miller <davem@redhat.com> [ 0.232000] athwdt_init: Registering WDT success [ 0.237000] Reset: Normal [ 0.246000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 0.254000] Freeing unused kernel memory: 144k freed [ 1.684000] ubnthal: module license 'Proprietary' taints kernel. [ 1.690000] Disabling lock debugging due to kernel taint [ 1.754000] ubnthal: initializing... [ 1.757000] ath-gpio 2.0 initialised [ 1.761000] ubnthal: initialised, board found, sysid = 0xe4f5, name = NanoBeam 5AC 19 [ 1.769000] ubnthal: host_board_t size: 7320B, boards table size: 164kB [ 6.486000] qca955x_GMAC: Length per segment 1536 [ 6.486000] 955x_GMAC: qca955x_gmac_attach [ 6.487000] 955x_GMAC: qca955x_gmac_attach [ 6.487000] Found PHY at address 4 with ID 4d:d074 [ 6.487000] 955x_GMAC: qca955x_set_gmac_caps [ 6.487000] Currently in polling mode unit0 [ 6.487000] Jumbo frames enabled for AR8033 [ 6.487000] Registering AR8033 Phy.... [ 6.487000] qca955x_GMAC: RX TASKLET - Pkts per Intr:160 [ 6.487000] qca955x_GMAC: Mac address for unit 0:bfff0000 [ 6.487000] qca955x_GMAC: 00:00:00:00:00:00 [ 6.488000] qca955x_GMAC: Max segments per packet : 1 [ 6.488000] qca955x_GMAC: Max tx descriptor count : 128 [ 6.488000] qca955x_GMAC: Max rx descriptor count : 224 [ 6.488000] qca955x_GMAC: Mac capability flags : 10082201 [ 6.489000] 955x_GMAC: qca955x_set_gmac_caps [ 6.489000] Currently in polling mode unit1 [ 6.489000] Jumbo frames enabled for AR8033 [ 6.489000] qca955x_GMAC: RX TASKLET - Pkts per Intr:160 [ 6.489000] qca955x_GMAC: Mac address for unit 1:bfff0006 [ 6.489000] qca955x_GMAC: 00:00:00:00:00:00 [ 6.490000] MAC:1 Warning: Phy not found!!! [ 6.490000] qca955x_GMAC: Max segments per packet : 1 [ 6.490000] qca955x_GMAC: Max tx descriptor count : 128 [ 6.490000] qca955x_GMAC: Max rx descriptor count : 224 [ 6.490000] qca955x_GMAC: Mac capability flags : 10082201 [ 6.490000] 955x_GMAC: Serdes PLL is locked value 0x1f038116 [ 7.174000] PPP generic driver version 2.4.2 [ 7.215000] PPP MPPE Compression module registered [ 7.239000] NET: Registered protocol family 24 [ 7.362000] GRE over IPv4 tunneling driver [ 7.415000] URD Init [ 7.954000] ath_hal: 0.9.17.1 (AR9380, REGOPS_FUNC, 11D) [ 7.977000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved [ 8.064000] ath_spectral: Version 2.0.0 [ 8.064000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved [ 8.064000] SPECTRAL module built on Nov 18 2016 19:16:31 [ 8.388000] Mirror/redirect action on [ 8.674000] gpio_i2c: module loaded [ 9.031000] ath_rate_atheros: driver unloaded [ 9.055000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved [ 9.292000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved [ 9.412000] ath_dfs: Version 2.0.0 [ 9.412000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved [ 10.895000] ath_pci: 10.1.467 (Atheros/multi-bss) [ 10.895000] Ubiquiti U-AME chipset detected [ 10.895000] ath_pci_probe [ 10.895000] PCI: Setting latency timer of device 0000:00:00.0 to 64 [ 10.895000] ath_pci 0000:00:00.0: ath DEBUG: sc=0x8700f400 [ 10.895000] [ 10.895000] ol_ath_pci_configure : num_desired MSI set to 0 [ 10.896000] [ 10.896000] Using PCI Legacy Interrupt [ 11.409000] __ol_ath_attach: ath_attach TODO [ 11.411000] ol_ath_attach() BMI inited. [ 11.411000] ol_ath_attach() BMI Get Target Info. [ 11.411000] ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016c [ 11.411000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 [ 11.412000] ol_ath_attach() configure Target . [ 11.412000] qc98xx_verify_checksum: flash checksum passed: 0x400e [ 11.412000] ol_transfer_bin_file 320: Download Flash data len 2116 [ 11.425000] BMI operation done [ 11.425000] ol_transfer_bin_file 241: Download Firmware data len 213528 [ 12.327000] BMI operation done [ 12.327000] ol_ath_attach() Download FW. [ 12.327000] ol_ath_attach() HT Create . [ 12.327000] ol_ath_attach() HIF Claim. [ 12.327000] ol_ath_attach() BMI Done. [ 12.328000] ol_ath_attach() WMI attached. wmi_handle 87aa0000 [ 12.328000] +HWT [ 12.331000] -HWT [ 12.331000] HTC Service:0x0300 ep:1 TX flow control disabled [ 12.337000] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event [ 12.337000] num_rf_chain : 00000002 [ 12.337000] ht_cap_info: : 0000085b [ 12.337000] vht_cap_info : 338001b2 [ 12.337000] vht_supp_mcs : 0000fffa [ 12.346000] FIRMWARE:P 35 V 2 T 113 [ 12.346000] [ 12.346000] wmi_ready_event_rx: WMI UNIFIED READY event [ 12.346000] ol_ath_connect_htc() WMI is ready [ 12.346000] ol_ath_set_host_app_area TODO [ 12.346000] ol_ath_attach() connect HTC. [ 12.346000] Supported modes: 0x1f9001 [ 12.346000] target uses HTT version 2.1; host uses 2.1 [ 12.346000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. [ 12.348000] ol_ath_phyerr_attach: called [ 12.348000] ath92.ieee80211_ifattach(): Enable ignore 11d [ 12.349000] OL Resmgr Init-ed [ 12.349000] ol_if_spectral_setup [ 12.349000] SPECTRAL : get_capability not registered [ 12.349000] HAL_CAP_PHYDIAG : Capable [ 12.349000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 233) [ 12.349000] SPECTRAL : get_capability not registered [ 12.349000] HAL_CAP_RADAR : Capable [ 12.349000] SPECTRAL : Need to fix the capablity check for SPECTRAL [ 12.349000] (spectral_attach : 238) [ 12.349000] SPECTRAL : get_capability not registered [ 12.349000] HAL_CAP_SPECTRAL_SCAN : Capable [ 12.349000] SPECTRAL : get_tsf64 not registered [ 12.349000] spectral_init_netlink 54 NULL SKB [ 12.349000] ol_if_dfs_setup: called [ 12.350000] ol_if_dfs_attach: called; ptr=85e86ffc, radar_info=87bebc70 [ 12.354000] ol_ath_rtt_meas_report_attach: called [ 12.354000] ol_ath_attach() UMAC attach . [ 12.354000] ol_if_dfs_configure: called [ 12.354000] ol_if_dfs_configure: FCC domain [ 12.354000] ol_if_dfs_disable: called [ 12.354000] ol_ath_phyerr_disable: about to send [ 12.354000] ol_ath_attach: Calling ol_if_dfs_configure [ 12.354000] __ol_ath_attach: init tx/rx TODO [ 12.354000] __ol_ath_attach: hard_header_len reservation 64 [ 12.354000] __ol_ath_attach: dev name wifi0 [ 12.355000] ath_ahb: 10.1.467 (Atheros/multi-bss) [ 12.355000] __ath_attach: Set global_scn[0] [ 12.356000] ACBKMinfree = 48 [ 12.356000] ACBEMinfree = 32 [ 12.356000] ACVIMinfree = 16 [ 12.356000] ACVOMinfree = 0 [ 12.356000] CABMinfree = 48 [ 12.356000] UAPSDMinfree = 0 [ 12.368000] Enterprise mode: 0x40000000 [ 12.368000] Restoring Cal data from Flash [ 12.369000] ar9300_eeprom_restore_internal[4670] No vaid CAL, calling default template [ 12.648000] SPECTRAL : get_capability not registered [ 12.648000] HAL_CAP_PHYDIAG : Capable [ 12.648000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 233) [ 12.648000] SPECTRAL : get_capability not registered [ 12.648000] HAL_CAP_RADAR : Capable [ 12.648000] SPECTRAL : Need to fix the capablity check for SPECTRAL [ 12.648000] (spectral_attach : 238) [ 12.648000] SPECTRAL : get_capability not registered [ 12.648000] HAL_CAP_SPECTRAL_SCAN : Capable [ 12.648000] SPECTRAL : get_tsf64 not registered [ 12.648000] spectral_init_netlink 54 NULL SKB [ 12.648000] IRQ request for SPECTRAL-XMIT-FILTER successful [ 12.648000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT [ 12.648000] SPECTRAL : module attached [ 12.654000] ath_get_caps[5886] rx chainmask mismatch actual 7 sc_chainmak 0 [ 12.654000] ath_get_caps[5861] tx chainmask mismatch actual 7 sc_chainmak 0 [ 12.654000] ath92.ieee80211_ifattach(): Enable ignore 11d [ 12.682000] ath_dfs: another dfs module already in use [ 12.682000] SPECTRAL : module already attached [ 12.684000] ath_tx_paprd_init sc 85f68000 PAPRD disabled in HAL [ 12.967000] wifi1: Atheros ???: mem=0xb8100000, irq=2 [ 13.054000] ubnt_poll_host: Hooks registered [ 13.054000] ubnt_poll_host: Allocated chardev region for major 189 [ 13.140000] rssi-leds 1.2 loaded [ 13.281000] ubnt_poll_host wifi0: Char device created succesfully err 0 [ 13.281000] ubnt_poll_host: Polling enabled for radio wifi0 [ 13.281000] ubnt_poll_host: noack_mode set to 0 for radio wifi0 [ 13.282000] ubnt-poll-host: [wifi0] Station priority configured to 2 (no-auto=0) [ 13.282000] ubnt_poll_host: ATPC disabled (0/0/0) for radio wifi0 [ 13.375000] dfs_control debug flags now 0x00000003 [ 13.378000] ath_ioctl: SIOC80211IFCREATE CALLED [ 13.379000] ubnt_poll_host: Initialized in AP mode for device wifi0 [ 13.379000] ubnt_poll_host TARGET LOG: ubnt_poll: Enabling PTP polling state machine [ 13.379000] VAP device ath0 created [ 13.389000] BW divisor: 0X411 [ 13.424000] OL vap_stop + [ 13.424000] OL vap_stop - [ 13.424000] Deliver ol stop event, node count: 1 [ 13.568000] ol_vdev_start_resp_ev [ 13.568000] ol_ath_vap_join: join operation is only for STA/IBSS mode [ 13.568000] ol_if_dfs_configure: called [ 13.568000] ol_if_dfs_configure: FCC domain [ 13.568000] ol_if_dfs_disable: called [ 13.568000] ol_ath_phyerr_disable: about to send [ 13.568000] DFS dfsdomain=1, num_filter_specifications=9, num_b5_filter_specifications=1 [ 13.569000] DFS min filter rssiThresh = 18 (with 0 adjustment for external gain, where possible) [ 13.569000] DFS max pulse dur = 151 ticks [ 13.569000] ol_if_dfs_enable: called [ 13.569000] ieee80211_dfs_cac_start: ***** CAC STARTED ***** Channel 5500 Timeout 67 sec, Current Time: 4294680 sec [ 13.569000] ieee80211_notify_vap_start_complete: Notification to UMAC VAP layer [ 13.625000] [ 13.625000] DES SSID SET=0000 [ 13.628000] ol_ath_vap_set_param: VAP param unsupported param:33 value:0 [ 13.669000] ol_ath_vap_set_param: VAP param unsupported param:36 value:0 [ 13.694000] DEVICE IS DOWN ifname=ath0 [ 13.962000] Ebtables v2.0 registered [ 14.485000] device eth0 entered promiscuous mode [ 14.490000] device ath0 entered promiscuous mode [ 14.527000] ieee80211_dfs_cac_stop: ***** CAC STOPPED ***** CAC Timer 5500 procphyerr 0x80000000 [ 14.527000] Deliver ol stop event, node count: 1 [ 14.654000] Invoking ACS module for Best channel selection [ 14.663000] athr_gmac_ring_alloc Allocated 2048 at 0x85b6d000 [ 14.663000] sram_desc_cnt 1536,mac Unit 0,Tx r->ring_desc 0xbd000000 [ 14.663000] athr_gmac_ring_alloc Allocated 3584 at 0x864df000 [ 14.663000] sram_desc_cnt 4224,mac Unit 0,Rx r->ring_desc 0xbd000600 [ 14.964000] 955x_GMAC: eth0 in SGMII MODE [ 14.964000] Scorpion -----> 8033 PHY [ 14.964000] athrs_ar8033_reg_init: PHY_ID1 = 0x004d PHY_ID2 = 0xd074 [ 15.167000] Setting PHY... [ 15.167000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.305000] br0: port 2(ath0) entering learning state [ 16.305000] br0: port 2(ath0) entering forwarding state [ 17.167000] 955x_GMAC: enet unit:0 is up... [ 17.167000] eth0 SGMII 1000Mbps full duplex [ 17.167000] 955x_GMAC: done cfg2 0x7235 ifctl 0x0 miictrl [ 17.367000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.367000] br0: port 1(eth0) entering learning state [ 18.367000] br0: port 1(eth0) entering forwarding state [ 20.498000] ath_dfs: another dfs module already in use [ 20.896000] wlan_vap_create : enter. devhandle=0x85f702c0, opmode=IEEE80211_M_MONITOR, flags=0x1 [ 20.896000] wlan_vap_create : exit. devhandle=0x85f702c0, opmode=IEEE80211_M_MONITOR, flags=0x1. [ 20.896000] VAP device airview1 created [ 21.172000] [ 21.172000] DES SSID SET=spectral [ 22.392000] ieee80211_acs_find_best_centerchan: ACS picked 5500 as best channel [ 22.392000] ol_if_dfs_clist_update: called, cmd=1, nollist=(null), nentries=0 [ 22.392000] OL vap_start + [ 22.392000] BW divisor: 0X411 [ 22.392000] OL vap_start - [ 22.393000] ol_vdev_start_resp_ev [ 22.393000] ol_ath_vap_join: join operation is only for STA/IBSS mode [ 22.393000] ol_ath_wmm_update: [ 22.393000] ol_if_dfs_configure: called [ 22.393000] ol_if_dfs_configure: FCC domain [ 22.393000] ol_if_dfs_disable: called [ 22.393000] ol_ath_phyerr_disable: about to send [ 22.393000] DFS dfsdomain=1, num_filter_specifications=9, num_b5_filter_specifications=1 [ 22.394000] DFS min filter rssiThresh = 18 (with 0 adjustment for external gain, where possible) [ 22.394000] DFS max pulse dur = 151 ticks [ 22.394000] ol_if_dfs_enable: called [ 22.394000] ieee80211_dfs_cac_start: ***** CAC STARTED ***** Channel 5500 Timeout 67 sec, Current Time: 4294689 sec [ 22.394000] ieee80211_notify_vap_start_complete: Notification to UMAC VAP layer [ 22.861000] ieee80211_ioctl_siwmode: vap->iv_opmode=6, new mode=3, valid=1 [ 22.861000] ol_ath_vap_set_param: VAP param unsupported param:33 value:0 [ 22.862000] ol_ath_vap_set_param: VAP param unsupported param:33 value:0 [ 23.533000] ol_ath_vap_set_param: VAP param unsupported param:33 value:1 [ 23.533000] ol_ath_vap_set_param: VAP param unsupported param:33 value:1 [ 23.533000] ol_ath_vap_set_param: VAP param unsupported param:33 value:1 [ 23.533000] ieee80211_dfs_cac_stop: ***** CAC STOPPED ***** CAC Timer 5500 procphyerr 0x80000000 [ 23.534000] Deliver ol stop event, node count: 1 [ 23.663000] ol_if_dfs_clist_update: called, cmd=1, nollist=(null), nentries=0 [ 23.663000] OL vap_start + [ 23.663000] BW divisor: 0X411 [ 23.663000] OL vap_start - [ 23.663000] ol_vdev_start_resp_ev [ 23.663000] ol_ath_vap_join: join operation is only for STA/IBSS mode [ 23.663000] ol_if_dfs_configure: called [ 23.663000] ol_if_dfs_configure: FCC domain [ 23.663000] ol_if_dfs_disable: called [ 23.663000] ol_ath_phyerr_disable: about to send [ 23.663000] DFS dfsdomain=1, num_filter_specifications=9, num_b5_filter_specifications=1 [ 23.663000] DFS min filter rssiThresh = 18 (with 0 adjustment for external gain, where possible) [ 23.663000] DFS max pulse dur = 151 ticks [ 23.664000] ol_if_dfs_enable: called [ 23.664000] ieee80211_dfs_cac_start: ***** CAC STARTED ***** Channel 5500 Timeout 67 sec, Current Time: 4294690 sec [ 23.664000] ieee80211_notify_vap_start_complete: Notification to UMAC VAP layer [ 23.741000] ol_ath_vap_set_param: VAP param unsupported param:33 value:1 [ 23.741000] Group Keyidx set=1 [ 23.741000] cac_timeout: ***** CAC EXPIRED ***** Channel 5500 Current Time 4294757 sec [ 90.664000] ieee80211_dfs_cac_stop: ***** CAC STOPPED ***** CAC Timer 5500 procphyerr 0x80000000 [ 90.664000] ubnt_poll_host TARGET LOG: ubnt_poll: Timing params set to Down:50, Up:50, Burst:3000 [ 104.633000] Unicast Keyidx set=5 [ 104.633000] 955x_GMAC: unit 0: phy 0 not up carrier 1 [126228.275000] br0: port 1(eth0) entering disabled state [126232.275000] 955x_GMAC: enet unit:0 is up... [126232.275000] eth0 SGMII 1000Mbps full duplex [126232.275000] 955x_GMAC: done cfg2 0x7235 ifctl 0x0 miictrl [126232.476000] br0: port 1(eth0) entering learning state [126233.476000] br0: port 1(eth0) entering forwarding state [126234.475000] 955x_GMAC: unit 0: phy 0 not up carrier 1 [126234.475000] br0: port 1(eth0) entering disabled state [126236.475000] 955x_GMAC: enet unit:0 is up... [126236.475000] eth0 SGMII 1000Mbps full duplex [126236.475000] 955x_GMAC: done cfg2 0x7235 ifctl 0x0 miictrl [126236.676000] br0: port 1(eth0) entering learning state [126237.676000] br0: port 1(eth0) entering forwarding state [126580.675000] 955x_GMAC: unit 0: phy 0 not up carrier 1 [126580.675000] br0: port 1(eth0) entering disabled state [126582.675000] 955x_GMAC: enet unit:0 is up... [126582.675000] eth0 SGMII 1000Mbps full duplex [126582.675000] 955x_GMAC: done cfg2 0x7235 ifctl 0x0 miictrl [126582.876000] br0: port 1(eth0) entering learning state [126583.876000] br0: port 1(eth0) entering forwarding state [126588.875000] 955x_GMAC: unit 0: phy 0 not up carrier 1 [126588.875000] br0: port 1(eth0) entering disabled state [126590.875000] 955x_GMAC: enet unit:0 is up... [126590.875000] eth0 SGMII 1000Mbps full duplex [126590.875000] 955x_GMAC: done cfg2 0x7235 ifctl 0x0 miictrl [126591.076000] br0: port 1(eth0) entering learning state [126592.076000] br0: port 1(eth0) entering forwarding state
OpenWrt bootlog
The following is the dmesg output from OpenWrt 22.03.2 successfully booted on a PowerBeam 5AC Gen2.
[ 0.000000] Linux version 5.10.146 (builder@buildhost) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19803-9a599fee93) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Fri Oct 14 22:44:41 2022 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) [ 0.000000] MIPS: machine is Ubiquiti PowerBeam 5AC Gen2 [ 0.000000] SoC: Atheros AR9342 rev 2 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] Normal zone: 144 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 56180K/65536K available (5850K kernel code, 611K rwdata, 744K rodata, 1232K init, 209K bss, 9356K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] CPU clock: 535.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7144898866 ns [ 0.000012] sched_clock: 32 bits at 267MHz, resolution 3ns, wraps every 8027976190ns [ 0.008415] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248) [ 0.095024] pid_max: default: 32768 minimum: 301 [ 0.100129] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107933] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.118925] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.130472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.141005] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.148382] pinctrl core: initialized pinctrl subsystem [ 0.159629] NET: Registered protocol family 16 [ 0.165406] thermal_sys: Registered thermal governor 'step_wise' [ 0.231564] clocksource: Switched to clocksource MIPS [ 0.244930] NET: Registered protocol family 2 [ 0.249867] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.258625] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.267681] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.275883] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.283419] TCP: Hash tables configured (established 1024 bind 1024) [ 0.290349] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.297397] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.305225] NET: Registered protocol family 1 [ 0.309903] PCI: CLS 0 bytes, default 32 [ 0.322182] workingset: timestamp_bits=14 max_order=14 bucket_order=0 [ 0.334174] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.340392] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.353588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.365218] pinctrl-single 1804002c.pinmux: 544 pins, size 68 [ 0.372597] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.382429] printk: console [ttyS0] disabled [ 0.387078] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A [ 0.396340] printk: console [ttyS0] enabled [ 0.405254] printk: bootconsole [early0] disabled [ 0.442104] spi-nor spi0.0: mx25l12805d (16384 Kbytes) [ 0.447423] 5 fixed-partitions partitions found on MTD device spi0.0 [ 0.453983] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 0.460731] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 0.468042] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 0.474855] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 0.482261] Creating 5 MTD partitions on "spi0.0": [ 0.487148] 0x000000000000-0x000000040000 : "u-boot" [ 0.495889] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.502673] 0x000000050000-0x000000fb0000 : "firmware" [ 0.511407] 2 uimage-fw partitions found on MTD device firmware [ 0.517515] Creating 2 MTD partitions on "firmware": [ 0.522598] 0x000000000000-0x000000230000 : "kernel" [ 0.529915] 0x000000230000-0x000000f60000 : "rootfs" [ 0.536191] mtd: device 4 (rootfs) set to be root filesystem [ 0.543239] 1 squashfs-split partitions found on MTD device rootfs [ 0.549545] 0x000000610000-0x000000f60000 : "rootfs_data" [ 0.556346] 0x000000fb0000-0x000000ff0000 : "cfg" [ 0.564554] 0x000000ff0000-0x000001000000 : "art" [ 1.052145] ag71xx 19000000.eth: connected to PHY at mdio.0:04 [uid=004dd072, driver=Qualcomm Atheros AR8035] [ 1.063061] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii-id [ 1.070199] i2c /dev entries driver [ 1.076398] NET: Registered protocol family 10 [ 1.091383] Segment Routing with IPv6 [ 1.095336] NET: Registered protocol family 17 [ 1.099962] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.113153] 8021q: 802.1Q VLAN Support v1.8 [ 1.118738] PCI host bridge /ahb/pcie-controller@180c0000 ranges: [ 1.125043] MEM 0x0000000010000000..0x0000000013ffffff [ 1.130352] IO 0x0000000000000000..0x0000000000000000 [ 1.135909] PCI host bridge to bus 0000:00 [ 1.140091] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff] [ 1.147108] pci_bus 0000:00: root bus resource [io 0x0000] [ 1.152783] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 1.159669] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.167789] pci 0000:00:00.0: [0777:11ac] type 00 class 0x028000 [ 1.173950] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 1.180888] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.187788] pci 0000:00:00.0: supports D1 D2 [ 1.193379] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.200129] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit] [ 1.207628] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref] [ 1.227597] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. [ 1.242953] Freeing unused kernel memory: 1232K [ 1.247561] This architecture does not have kernel memory protection. [ 1.254144] Run /sbin/init as init process [ 1.258301] with arguments: [ 1.258307] /sbin/init [ 1.258313] with environment: [ 1.258318] HOME=/ [ 1.258324] TERM=linux [ 2.115903] init: Console is alive [ 2.119963] init: - watchdog - [ 3.757818] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.812140] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.830124] init: - preinit - [ 6.111054] random: jshn: uninitialized urandom read (4 bytes read) [ 6.699957] random: jshn: uninitialized urandom read (4 bytes read) [ 6.854711] random: jshn: uninitialized urandom read (4 bytes read) [ 7.179163] random: jshn: uninitialized urandom read (4 bytes read) [ 7.351198] random: jshn: uninitialized urandom read (4 bytes read) [ 7.475850] random: procd: uninitialized urandom read (4 bytes read) [ 9.543045] eth0: link up (1000Mbps/Full duplex) [ 9.547787] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.032662] jffs2: notice: (482) jffs2_build_xattr_subsystem: complete building xattr subsystem, 53 of xdatum (6 unchecked, 40 orphan) and 64 of xref (9 dead, 38 orphan) found. [ 12.051433] mount_root: switching to jffs2 overlay [ 12.062380] overlayfs: upper fs does not support tmpfile. [ 12.076235] urandom-seed: Seeding with /etc/urandom.seed [ 12.330321] eth0: link down [ 12.350699] procd: - early - [ 12.354197] procd: - watchdog - [ 13.151747] procd: - watchdog - [ 13.156839] procd: - ubus - [ 13.280408] random: ubusd: uninitialized urandom read (4 bytes read) [ 13.290704] random: ubusd: uninitialized urandom read (4 bytes read) [ 13.298013] random: ubusd: uninitialized urandom read (4 bytes read) [ 13.309782] procd: - init - [ 14.282559] random: ubusd: uninitialized urandom read (4 bytes read) [ 14.989100] kmodloader: loading kernel modules from /etc/modules.d/* [ 15.578146] urngd: v1.0.2 started. [ 15.722787] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064 [ 15.730486] Backport generated by backports.git v5.15.58-1-0-g42a95ce7 [ 16.159053] random: crng init done [ 16.162588] random: 24 urandom warning(s) missed due to ratelimiting [ 16.255552] PPP generic driver version 2.4.2 [ 16.264451] NET: Registered protocol family 24 [ 16.310295] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x11ac. [ 16.321163] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002) [ 16.327772] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 [ 21.258140] ath10k_pci 0000:00:00.0: qca988x hw2.0 ubiquiti target 0x4100016c chip_id 0x043222ff sub 0777:e3d6 [ 21.268377] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 21.281756] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f [ 21.402098] ath10k_pci 0000:00:00.0: Loading BDF type 0 [ 22.679135] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 23.769978] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256 [ 23.787848] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410' [ 23.794066] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0' [ 23.802230] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672' [ 23.851425] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1 [ 23.874201] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000 [ 24.013839] ath: EEPROM regdomain: 0x2a [ 24.013855] ath: EEPROM indicates we should expect a direct regpair map [ 24.013877] ath: Country alpha2 being used: US [ 24.013883] ath: Regpair used: 0x2a [ 24.139307] ath: EEPROM regdomain: 0x2a [ 24.139324] ath: EEPROM indicates we should expect a direct regpair map [ 24.139347] ath: Country alpha2 being used: US [ 24.139353] ath: Regpair used: 0x2a [ 24.154302] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 24.157067] ieee80211 phy1: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12 [ 24.199653] kmodloader: done loading kernel modules from /etc/modules.d/*
Notes
Space for additional notes, links to forum threads or other resources.
- ...
Tags
Add tags below, then remove this fixme.