TRENDnet TEW-691GR

U-Boot 1.1.3 (Sep 29 2010 - 10:49:55) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fac000 Set info->start[0]=BC000000 flash_protect ON: from 0xBC000000 to 0xBC01F2EB flash_protect ON: from 0xBC030000 to 0xBC030FFF *** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 3.4.0.0 -------------------------------------------- ASIC 3883_MP (MAC to VITESSE Mode) DRAM component: 512 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 64 MBytes Flash component: NOR Flash Date:Sep 29 2010 Time:10:49:55 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 480 MHZ #### SDRAM bus set to 32 bit SDRAM size =64 Mbytes Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP.  4  3  2  1  0 3: System Boot system code via Flash. ## Booting image at bc050000 ... Image Name: Linux Kernel Image Created: 2013-11-14 5:22:30 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3860621 Bytes = 3.7 MB Load Address: 80000000 Entry Point: 802f9000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 802f9000) ... ## Giving linux memsize in MB, 64 Starting kernel ... LINUX started... THIS IS ASIC Linux version 2.6.21 (tom.hung@fedora17) (gcc version 3.4.2) #2 Thu Nov 14 13:22:22 CST 2013 The CPU frequency set to 480 MHz CPU revision is: 0001974c Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Initrd not found or empty - disabling initrd Built 1 zonelists. Total pages: 16256 Kernel command line: console=ttyS1,57600n8 root=/dev/ram0 Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). cause = 40808000, status = 11000000 PID hash table entries: 256 (order: 8, 1024 bytes) calculating r4koff... 001d4c00(1920000) CPU frequency 480.00 MHz Using 240.000 MHz high precision timer. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 58860k/65536k available (2343k kernel code, 6612k reserved, 696k data, 2808k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized NET: Registered protocol family 2 Time: MIPS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered detected lzma initramfs detected lzma initramfs initramfs: LZMA lc=3,lp=0,pb=2,dictSize=1048576,origSize=12480000 LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com>...............................................................................................................................................................................................<5>ralink flash device: 0x1000000 at 0x1c000000 Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 Ralink SoC physically mapped flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 5 MTD partitions on "Ralink SoC physically mapped flash": 0x00000000-0x00400000 : "ALL" 0x00000000-0x00030000 : "Bootloader" 0x00030000-0x00040000 : "Config" 0x00040000-0x00050000 : "Factory" 0x00050000-0x01000000 : "Kernel" mtd: partition "Kernel" extends beyond the end of device "Ralink SoC physically mapped flash" -- size truncated to 0x3b0000 squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher squashfs: LZMA suppport for slax.org by jro io scheduler noop registered (default) ====== GPIO Mode: 0x1811 ====== Ralink gpio driver initialized spidrv_major = 217 i2cdrv_major = 218 HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.8 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Ralink APSoC Ethernet Driver Initilization. v2.1 256 rx/tx descriptors allocated, mtu = 1500! MAC_ADRH -- : 0x0000d8eb MAC_ADRL -- : 0x97a640b0 PROC INIT OK! IMQ starting with 2 devices... IMQ driver loaded successfully. Hooking IMQ after NAT on PREROUTING. Hooking IMQ before NAT on POSTROUTING. PPP generic driver version 2.4.2 PPP BSD Compression module registered NET: Registered protocol family 24 block2mtd: version $Revision: 1.1.1.1 $ Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (512 buckets, 4096 max) nf_conntrack_rtsp v0.03 loading match connlimit register PPTP driver version 0.8.5 GRE over IPv4 demultiplexor driver<6>gre: can't add protocol ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> Freeing unused kernel memory: 2808k freed init started: BusyBox v1.12.1 (Algorithmics/MIPS FPU Emulator v1.5 2013-11-14 11:41:19 CST) starting pid 612, ttydevpts: called with bogus options '': '/etc_ro/rcS' mount: mounting none on /proc/bus/usb failed: No such file or directory Welcome to _______ _______ ___ __ ____ _ _ ___ | ___ \| __ || | |__|| \ | || | / / | |___| || |__| || |__ __ | \| || |/ / | _ /| _ || || || |\ || \ |__| \__\|__| |__||______||__||_| \____||_|\___\ =System Architecture Department= flash error, file size too large! no config file to read, put it first. Erasing mtd failed Erasing mtd failed Erasing mtd failed Create a message queue in goahead for interprocess communication!! ifconfig ra0 down ifconfig: ioctl 0x8913 failed: No such device ifconfig ra1 down ifconfig: ioctl 0x8913 failed: No such device ifconfig ra2 down ifconfig: ioctl 0x8913 failed: No such device ifconfig ra3 down ifconfig: ioctl 0x8913 failed: No such device rmmod rt2860v2_ap rmmod: rt2860v2_ap: No such file or directory ralink_init make_wireless_config rt2860 Jan 1 00:00:05 crond[653]: crond (busybox 1.12.1) started, log level 8 insmod rt2860v2_ap rt2860v2_ap: module license 'unspecified' taints kernel. === pAd = c005c000, size = 671912 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 ifconfig ra0 up RX DESC a331b000 size = 2048 starting pid 695, tty '/dev/ttyS1': '/bin/sh' BusyBox v1.12.1 (2013-11-14 11:41:19 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. # Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=0 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff ff 00 01 SYNC - BBP R4 to 20MHz.l [: 3200: unknown operand Main bssid = d8:eb:97:a6:40:b0 <==== rt28xx_init, Status=0 0x1300 = 00064380 ifconfig ra1 up ifconfig: ioctl 0x8913 failed: No such device ifconfig ra2 up ifconfig: ioctl 0x8913 failed: No such device ifconfig ra3 up ifconfig: ioctl 0x8913 failed: No such device brctl addif br0 ra0 brctl: bridge br0: No such device brctl addif br0 ra1 brctl: iface ra1: No such device brctl addif br0 ra2 brctl: iface ra2: No such device brctl addif br0 ra3 brctl: iface ra3: No such device First time initInternet, detect dip switch status: On internet.sh 0 chpasswd: an error occurred updating password for admin rmmod: ralink_wdt: No such file or directory rmmod: cls: No such file or directory rmmod: hw_nat: No such file or directory rmmod: raeth: No such file or directory brctl: iface apcli0: No such device ifconfig: ioctl 0x8913 failed: No such device phy_tx_ring = 0x00323000, tx_ring = 0xa0323000 phy_rx_ring0 = 0x00324000, rx_ring0 = 0xa0324000 Initing AR8316 phyUnit=1,phyBase=0,phyAddr=1,phyHwStatus =0x10 0x03=d041 eth0: Phy Specific Status=0010 phyUnit=2,phyBase=0,phyAddr=2,phyHwStatus =0x10 0x03=d041 eth0: Phy Specific Status=0010 phyUnit=3,phyBase=0,phyAddr=3,phyHwStatus =0x10 0x03=d041 eth0: Phy Specific Status=0010 phyUnit=4,phyBase=0,phyAddr=4,phyHwStatus =0x10 0x03=d041 eth0: Phy Specific Status=0010 phyUnit=5,phyBase=0,phyAddr=32,phyHwStatus =0x10 0x03=d041 eth0: Phy Specific Status=0010 Calling athrs16_reg_init athrs16_reg_init VLAN Setup complete. Livelinks=0 No PHYs found... MAC_ADRH -- : 0x0000d8eb MAC_ADRL -- : 0x97a640b0 CDMA_CSG_CFG = 81000007 GDMA1_FWD_CFG = C0710000 acm_msg> ACM_MEM_Alloc_Num = 1 acm_msg> ACM_MEM_Free_Num = 1 ##### disable 1st wireless interface ##### rmmod: rt2860v2_ap_net: No such file or directory RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0! rmmod: rt2860v2_ap_util: No such file or directory rmmod: rt2860v2_sta_net: No such file or directory rmmod: rt2860v2_sta: No such file or directory rmmod: rt2860v2_sta_util: No such file or directory insmod: rt2860v2_ap_util.ko: module not found === pAd = c005c000, size = 671912 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 insmod: rt2860v2_ap_net.ko: module not found rmmod: nf_nat_pptp: No such file or directory rmmod: nf_conntrack_pptp: No such file or directory rmmod: nf_nat_proto_gre: No such file or directory rmmod: nf_conntrack_proto_gre: No such file or directory RX DESC a04e7000 size = 2048 Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=0 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff ff 00 01 SYNC - BBP R4 to 20MHz.l Main bssid = d8:eb:97:a6:40:b0 <==== rt28xx_init, Status=0 0x1300 = 00064380 vconfig: ioctl error for rem: Invalid argument vconfig: ioctl error for rem: Invalid argument rmmod: 8021q: No such file or directory insmod: 8021q.ko: module not found eth2.2 Link encap:Ethernet HWaddr D8:EB:97:A6:40:B0 ifconfig: ioctl 0x8913 failed: No such device brctl: bridge br0: No such device brctl: bridge br0: No such device EntryLifeCheck Cnt = 1024. device ra0 entered promiscuous mode brctl: bridge br0: Device or resource busy eth2.1: dev_set_promiscuity(master, 1) device eth2 entered promiscuous mode device eth2.1 entered promiscuous mode Raise 1.2v voltage of RT3883 to 1.21v (PLL and RF) for improve TEW-691GR low throughput issue or crash issue ra0 rf: R20[0x14]:44 eth2.2: Setting MAC address to d8 eb 97 a6 40 b0. VLAN (eth2.2): Underlying device (eth2) has same MAC, not checking promiscious mode. eth2.2: Setting MAC address to d8 eb 97 a6 40 b3. killall: config-chat.sh: no process killed udhcpc (v1.12.1) started br0: port 2(eth2.1) entering learning state br0: port 1(ra0) entering learning state ifconfig: ioctl 0x8914 failed: Cannot assign requested address ifconfig: ioctl 0x8914 failed: Cannot assign requested address ***** g_wl_interface = ra0 ****** ############ Show current upstream interface and IP address for igmpproxy ############ upstream interface: eth2.2 IP address: inet6 addr: fe80::daeb:97ff:fea6:40b3/64 Scope:Link iptables: No chain/target/match by that name igmpproxy, Version 0.1 beta2, Build 131114 Copyright 2005 by Johnny Egeland <johnny@rlo.org> Distributed under the GNU GENERAL PUBLIC LICENSE, Version 2 - check GPL.txt Warn: Warning, No upstream interface assigned. iptables: No chain/target/match by that name iptables: No chain/target/match by that name route: ioctl 0x890c failed: No such process Start UPnP: upnpd check: eth2.2 br0 libupnp: using UDP SSDP_PORT = 1900 DHCP Server start initial br0: topology change detected, propagating br0: port 2(eth2.1) entering forwarding state br0: topology change detected, propagating br0: port 1(ra0) entering forwarding state killall: udhcpd: no process killed ****** Running ipv6Lan.sh ****** [RunSystemCmd 93] ipv6Lan.sh ############ Running ipv6Lan.sh ############ killall: dhcp6s: no process killed ############ End of ipv6Lan.sh ############ [init_ipv6 797] ###### init IPv6 ###### [RunSystemCmd 93] mkdir /var/db/ [init_ipv6 821] ###### Reset WAN IPv6 ###### [init_ipv6 849] v6TunIf_old= [RunSystemCmd 93] echo 1 > /proc/sys/net/ipv6/conf/eth2.2/autoconf [set_DNS 681] ###### Set DNS ###### [RunSystemCmd 93] echo -n > /etc/wanv6_resolv.conf [RunSystemCmd 93] echo -n > /etc/wan_resolv.conf [RunSystemCmd 93] echo 1 > /proc/sys/net/ipv6/conf/all/forwarding [RunSystemCmd 93] ipv6Lan.sh ############ Running ipv6Lan.sh ############ killall: dhcp6s: no process killed ############ End of ipv6Lan.sh ############ iptables: No chain/target/match by that name Enable Implicit and Explicit Tx Beamforming for TEW-691GR Configure predefined URL to: "tew-691gr.trendnet" DHCP Server start initial 0xB0=0xCC36CC36 0xB4=0xCA36CA36 0xB8=0xC936C936 send_event: Sent firewall reload message to goahead! /sbin/ant_div.sh: line 18: can't create /proc/AntDiv/AD_ALGORITHM: nonexistent directory /sbin/ant_div.sh: line 18: can't create /proc/AntDiv/AD_RUN: nonexistent directory killall rt2860apd 1>/dev/null 2>&1 killall rt2860apd 1>/dev/null 2>&1 ntp.sh ddns.sh kill -9 `cat /var/run/wscd.pid.ra0` iwpriv ra0 set WscConfMode=0 1>/dev/null 2>&1 iwpriv ra0 set WscConfMode=7 iwpriv ra0 set WscConfStatus=1 route add -host 239.255.255.250 dev br0 1>/dev/null 2>&1 wscd -m 1 -a 192.168.10.1 -i ra0 & libupnp: using UDP SSDP_PORT = 1900 setup-wizard.sh /sbin/setup-wizard.sh: line 12: setup-wizard: not found getBoardID BoardID: 026910 killall -q klogd killall -q syslogd syslogd -C8 1>/dev/null 2>&1 klogd 1>/dev/null 2>&1 /bin/qos_run webs: Listening for HTTP requests at address 192.168.10.1 iwpriv ra0 set WscAPLock=1 goahead: local script rc.local Adding multicast routing Limit Ping of Death Start RFW daemon bind policy ipv4 send_event: Sent firewall reload message to goahead! iptables -t nat -D PREROUTING -i eth2.2 -j TRIGGER --trigger-type dnat iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -i eth2.2 -j TRIGGER --trigger-type dnat iptables -t nat -D PREROUTING -i ppp0 -j TRIGGER --trigger-type dnat iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -i ppp0 -j TRIGGER --trigger-type dnat There is not any static route be set up! Password for 'umedia' changed lang_free: Don't need release multi-lang mapping again. lang_init: File /etc_ro/web/lang/STRINGS_EN.txt open fail! goahead.c: multi-lang init fail. goahead: Get message from send_event, the message is firewall_reload goahead: start firewall_init() echo 0 > /proc/sys/net/ipv4/ip_forward iptables -F -t filter 1>/dev/null 2>&1 iptables -D FORWARD -j macipport_block 1>/dev/null 2>&1 iptables -F macipport_block 1>/dev/null 2>&1 iptables -t mangle -F POSTROUTING_ALG iptables: No chain/target/match by that name iptables -P INPUT ACCEPT iptables -P OUTPUT ACCEPT iptables -P FORWARD ACCEPT iptables -F INPUT_SPort iptables: No chain/target/match by that name iptables -F FORWARD_SPort iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_SPort iptables: No chain/target/match by that name iptables -t nat -F POSTROUTING_SPort iptables: No chain/target/match by that name iptables -F INPUT_MPort iptables: No chain/target/match by that name iptables -F FORWARD_MPort iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_MPort iptables: No chain/target/match by that name iptables -t nat -F POSTROUTING_MPort iptables: No chain/target/match by that name iptables -F INPUT_AC iptables: No chain/target/match by that name iptables -F FORWARD_AC iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_AC iptables: No chain/target/match by that name iptables -t nat -F POSTROUTING_AC iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_DMZ iptables: No chain/target/match by that name iptables -t nat -F POSTROUTING_DMZ iptables: No chain/target/match by that name iptables -t nat -F POSTROUTING iptables -t nat -F PREROUTING iptables -t nat -F PREROUTING_ICMP iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_UPnP iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu 1>/dev/null 2>&1 iptables -I PREROUTING -t nat -i eth2.2 -s 0.0.0.0/0 -p udp -m state --state NEW -j DROP iptables -I PREROUTING -t nat -i eth2.2 -p tcp --syn -j DROP iptables -I PREROUTING -t nat -i eth2.2 -s 0.0.0.0/0 -p udp --sport 520 -j ACCEPT iptables -I PREROUTING -t nat -i eth2.2 -s 0.0.0.0/0 -p tcp -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -t nat -D PREROUTING -i eth2.2 -j TRIGGER --trigger-type dnat iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -i eth2.2 -j TRIGGER --trigger-type dnat iptables -t nat -D PREROUTING -i ppp0 -j TRIGGER --trigger-type dnat iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -i ppp0 -j TRIGGER --trigger-type dnat iptables -t nat -N POSTROUTING_NAT iptables: Chain already exists iptables -t nat -D POSTROUTING -j POSTROUTING_NAT iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_NAT iptables -t nat -N POSTROUTING_DNS iptables -t nat -D POSTROUTING -j POSTROUTING_DNS iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_DNS iptables -t nat -F POSTROUTING_DNS iptables -t nat -N PREROUTING_ICMP iptables -t nat -D PREROUTING -j PREROUTING_ICMP iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_ICMP iptables -t nat -F PREROUTING_ICMP iptables -I PREROUTING_ICMP -t nat -i eth2.2 -s 0.0.0.0/0 -p icmp --icmp-type echo-request -j DROP iptables -t nat -N PREROUTING_DMZ iptables -t nat -D PREROUTING -j PREROUTING_DMZ iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_DMZ iptables -t nat -N POSTROUTING_DMZ iptables -t nat -D POSTROUTING -j POSTROUTING_DMZ iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_DMZ iptables -t filter -N web_filter 1>/dev/null 2>&1 iptables -t filter -D FORWARD -j web_filter 1>/dev/null 2>&1 iptables -t filter -I FORWARD -j web_filter 1>/dev/null 2>&1 iptables -t filter -N ip_range_block 1>/dev/null 2>&1 iptables -t filter -D FORWARD -j ip_range_block 1>/dev/null 2>&1 iptables -t filter -I FORWARD -j ip_range_block 1>/dev/null 2>&1 iptables -D FORWARD -j FORWARD_UPnP iptables: No chain/target/match by that name iptables -I FORWARD -j FORWARD_UPnP iptables -t nat -D PREROUTING -j PREROUTING_UPnP iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_UPnP iptables -N INPUT_SPort iptables -D INPUT -j INPUT_SPort iptables: No chain/target/match by that name iptables -I INPUT -j INPUT_SPort iptables -N FORWARD_SPort iptables -D FORWARD -j FORWARD_SPort iptables: No chain/target/match by that name iptables -I FORWARD -j FORWARD_SPort iptables -N INPUT_MPort iptables -D INPUT -j INPUT_MPort iptables: No chain/target/match by that name iptables -I INPUT -j INPUT_MPort iptables -N FORWARD_MPort iptables -D FORWARD -j FORWARD_MPort iptables: No chain/target/match by that name iptables -I FORWARD -j FORWARD_MPort iptables -t nat -N PREROUTING_SPort iptables -t nat -D PREROUTING -j PREROUTING_SPort iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_SPort iptables -t nat -N POSTROUTING_SPort iptables -t nat -D POSTROUTING -j POSTROUTING_SPort iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_SPort iptables -t nat -N PREROUTING_MPort iptables -t nat -D PREROUTING -j PREROUTING_MPort iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_MPort iptables -t nat -N POSTROUTING_MPort iptables -t nat -D POSTROUTING -j POSTROUTING_MPort iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_MPort iptables -t nat -N PREROUTING_AC iptables -t nat -D PREROUTING -j PREROUTING_AC iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_AC iptables -t nat -N PREROUTING_Remote iptables -t nat -D PREROUTING -j PREROUTING_Remote iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_Remote iptables -t nat -N POSTROUTING_Remote iptables -t nat -D POSTROUTING -j POSTROUTING_Remote iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_Remote iptables -t mangle -N POSTROUTING_ALG iptables -t mangle -D POSTROUTING -j POSTROUTING_ALG iptables: No chain/target/match by that name iptables -t mangle -I POSTROUTING -j POSTROUTING_ALG iptables -t nat -N PREROUTING_IGMP iptables -t nat -D PREROUTING -j PREROUTING_IGMP iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_IGMP iptables -t filter -F web_filter iptables -t filter -F ip_range_block Can't get wan ip address!! iptables -A FORWARD -p 1 -j ACCEPT iptables -A FORWARD -p 47 -j ACCEPT iptables -A FORWARD -p 50 -j ACCEPT iptables -A FORWARD -p 51 -j ACCEPT iptables -A FORWARD -p 6 -j ACCEPT iptables -A FORWARD -p 17 -j ACCEPT iptables -A INPUT -j DROP -p tcp --sport 0 iptables -A INPUT -j DROP -p udp --sport 0 iptables -A INPUT -j DROP -p tcp --dport 0 iptables -A INPUT -j DROP -p udp --dport 0 iptables -A INPUT -j DROP -p tcp --sport 1 iptables -A INPUT -j DROP -p udp --sport 1 iptables -A INPUT -j DROP -p tcp --dport 1 iptables -A INPUT -j DROP -p udp --dport 1 iptables -A INPUT -p tcp -j ACCEPT iptables -A INPUT -p udp -j ACCEPT iptables -F INPUT_SPort iptables -F FORWARD_SPort iptables -t nat -F PREROUTING_SPort iptables -t nat -F POSTROUTING_SPort iptables -F INPUT_MPort iptables -F FORWARD_MPort iptables -t nat -F PREROUTING_MPort iptables -t nat -F POSTROUTING_MPort iptables -F INPUT_AC iptables: No chain/target/match by that name iptables -F FORWARD_AC iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_AC iptables -t nat -F POSTROUTING_AC iptables: No chain/target/match by that name kill `ps |grep 'crond'|grep -v 'grep'|awk '{print $1}'` crond iptables -t nat -I PREROUTING_AC -p tcp --dport 80 -s 192.168.10.1/255.255.255.0 -d 192.168.10.1 -j ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/nf_conntrack_flush echo 7200 > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established killall -q zebra killall -q ripd ntp.sh goahead: Get message from send_event, the message is firewall_reload goahead: start firewall_init() echo 0 > /proc/sys/net/ipv4/ip_forward iptables -F -t filter 1>/dev/null 2>&1 iptables -D FORWARD -j macipport_block 1>/dev/null 2>&1 iptables -F macipport_block 1>/dev/null 2>&1 iptables -t mangle -F POSTROUTING_ALG iptables -P INPUT ACCEPT iptables -P OUTPUT ACCEPT iptables -P FORWARD ACCEPT iptables -F INPUT_SPort iptables -F FORWARD_SPort iptables -t nat -F PREROUTING_SPort iptables -t nat -F POSTROUTING_SPort iptables -F INPUT_MPort iptables -F FORWARD_MPort iptables -t nat -F PREROUTING_MPort iptables -t nat -F POSTROUTING_MPort iptables -F INPUT_AC iptables: No chain/target/match by that name iptables -F FORWARD_AC iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_AC iptables -t nat -F POSTROUTING_AC iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_DMZ iptables -t nat -F POSTROUTING_DMZ iptables -t nat -F POSTROUTING iptables -t nat -F PREROUTING iptables -t nat -F PREROUTING_ICMP iptables -t nat -F PREROUTING_UPnP iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu 1>/dev/null 2>&1 iptables -I PREROUTING -t nat -i eth2.2 -s 0.0.0.0/0 -p udp -m state --state NEW -j DROP iptables -I PREROUTING -t nat -i eth2.2 -p tcp --syn -j DROP iptables -I PREROUTING -t nat -i eth2.2 -s 0.0.0.0/0 -p udp --sport 520 -j ACCEPT iptables -I PREROUTING -t nat -i eth2.2 -s 0.0.0.0/0 -p tcp -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -t nat -D PREROUTING -i eth2.2 -j TRIGGER --trigger-type dnat iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -i eth2.2 -j TRIGGER --trigger-type dnat iptables -t nat -D PREROUTING -i ppp0 -j TRIGGER --trigger-type dnat iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -i ppp0 -j TRIGGER --trigger-type dnat iptables -t nat -N POSTROUTING_NAT iptables: Chain already exists iptables -t nat -D POSTROUTING -j POSTROUTING_NAT iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_NAT iptables -t nat -N POSTROUTING_DNS iptables: Chain already exists iptables -t nat -D POSTROUTING -j POSTROUTING_DNS iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_DNS iptables -t nat -F POSTROUTING_DNS iptables -t nat -N PREROUTING_ICMP iptables: Chain already exists iptables -t nat -D PREROUTING -j PREROUTING_ICMP iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_ICMP iptables -t nat -F PREROUTING_ICMP iptables -I PREROUTING_ICMP -t nat -i eth2.2 -s 0.0.0.0/0 -p icmp --icmp-type echo-request -j DROP iptables -t nat -N PREROUTING_DMZ iptables: Chain already exists iptables -t nat -D PREROUTING -j PREROUTING_DMZ iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_DMZ iptables -t nat -N POSTROUTING_DMZ iptables: Chain already exists iptables -t nat -D POSTROUTING -j POSTROUTING_DMZ iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_DMZ iptables -t filter -N web_filter 1>/dev/null 2>&1 iptables -t filter -D FORWARD -j web_filter 1>/dev/null 2>&1 iptables -t filter -I FORWARD -j web_filter 1>/dev/null 2>&1 iptables -t filter -N ip_range_block 1>/dev/null 2>&1 iptables -t filter -D FORWARD -j ip_range_block 1>/dev/null 2>&1 iptables -t filter -I FORWARD -j ip_range_block 1>/dev/null 2>&1 iptables -D FORWARD -j FORWARD_UPnP iptables: No chain/target/match by that name iptables -I FORWARD -j FORWARD_UPnP iptables -t nat -D PREROUTING -j PREROUTING_UPnP iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_UPnP iptables -N INPUT_SPort iptables: Chain already exists iptables -D INPUT -j INPUT_SPort iptables: No chain/target/match by that name iptables -I INPUT -j INPUT_SPort iptables -N FORWARD_SPort iptables: Chain already exists iptables -D FORWARD -j FORWARD_SPort iptables: No chain/target/match by that name iptables -I FORWARD -j FORWARD_SPort iptables -N INPUT_MPort iptables: Chain already exists iptables -D INPUT -j INPUT_MPort iptables: No chain/target/match by that name iptables -I INPUT -j INPUT_MPort iptables -N FORWARD_MPort iptables: Chain already exists iptables -D FORWARD -j FORWARD_MPort iptables: No chain/target/match by that name iptables -I FORWARD -j FORWARD_MPort iptables -t nat -N PREROUTING_SPort iptables: Chain already exists iptables -t nat -D PREROUTING -j PREROUTING_SPort iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_SPort iptables -t nat -N POSTROUTING_SPort iptables: Chain already exists iptables -t nat -D POSTROUTING -j POSTROUTING_SPort iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_SPort iptables -t nat -N PREROUTING_MPort iptables: Chain already exists iptables -t nat -D PREROUTING -j PREROUTING_MPort iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_MPort iptables -t nat -N POSTROUTING_MPort iptables: Chain already exists iptables -t nat -D POSTROUTING -j POSTROUTING_MPort iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_MPort iptables -t nat -N PREROUTING_AC iptables: Chain already exists iptables -t nat -D PREROUTING -j PREROUTING_AC iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_AC iptables -t nat -N PREROUTING_Remote iptables: Chain already exists iptables -t nat -D PREROUTING -j PREROUTING_Remote iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_Remote iptables -t nat -N POSTROUTING_Remote iptables: Chain already exists iptables -t nat -D POSTROUTING -j POSTROUTING_Remote iptables: No chain/target/match by that name iptables -t nat -I POSTROUTING -j POSTROUTING_Remote iptables -t mangle -N POSTROUTING_ALG iptables: Chain already exists iptables -t mangle -D POSTROUTING -j POSTROUTING_ALG iptables -t mangle -I POSTROUTING -j POSTROUTING_ALG iptables -t nat -N PREROUTING_IGMP iptables: Chain already exists iptables -t nat -D PREROUTING -j PREROUTING_IGMP iptables: No chain/target/match by that name iptables -t nat -I PREROUTING -j PREROUTING_IGMP iptables -t filter -F web_filter iptables -t filter -F ip_range_block Can't get wan ip address!! iptables -A FORWARD -p 1 -j ACCEPT iptables -A FORWARD -p 47 -j ACCEPT iptables -A FORWARD -p 50 -j ACCEPT iptables -A FORWARD -p 51 -j ACCEPT iptables -A FORWARD -p 6 -j ACCEPT iptables -A FORWARD -p 17 -j ACCEPT iptables -A INPUT -j DROP -p tcp --sport 0 iptables -A INPUT -j DROP -p udp --sport 0 iptables -A INPUT -j DROP -p tcp --dport 0 iptables -A INPUT -j DROP -p udp --dport 0 iptables -A INPUT -j DROP -p tcp --sport 1 iptables -A INPUT -j DROP -p udp --sport 1 iptables -A INPUT -j DROP -p tcp --dport 1 iptables -A INPUT -j DROP -p udp --dport 1 iptables -A INPUT -p tcp -j ACCEPT iptables -A INPUT -p udp -j ACCEPT iptables -F INPUT_SPort iptables -F FORWARD_SPort iptables -t nat -F PREROUTING_SPort iptables -t nat -F POSTROUTING_SPort iptables -F INPUT_MPort iptables -F FORWARD_MPort iptables -t nat -F PREROUTING_MPort iptables -t nat -F POSTROUTING_MPort iptables -F INPUT_AC iptables: No chain/target/match by that name iptables -F FORWARD_AC iptables: No chain/target/match by that name iptables -t nat -F PREROUTING_AC iptables -t nat -F POSTROUTING_AC iptables: No chain/target/match by that name kill `ps |grep 'crond'|grep -v 'grep'|awk '{print $1}'` crond iptables -t nat -I PREROUTING_AC -p tcp --dport 80 -s 192.168.10.1/255.255.255.0 -d 192.168.10.1 -j ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/nf_conntrack_flush echo 7200 > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established killall -q zebra killall -q ripd ntp.sh Start System Deamon Clear connection track table