TP-Link RE350 v1

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.

Keep the articles modular

Please include only model specific information, omit bla,bla and put everything generic into separate articles
If you have no time to write certain stuff, link to docs
base-system should lead the way, do not explain this again
DO NOT provide a complete howto here! Instead groom the general documentation.

→ Install OpenWrt (generic explanation)

Please add the installation procedure here.

Find out flash layout, then add the flash layout table here (copy, paste, modify the example).

Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.

The instructions below are for Broadcom devices and only serve as an example.
Remove / modify them if they do not apply to this particular device!

This section deals with

How you install OpenWrt from a device freshly opened
The steps required such as reset to factory defaults if the device has already been configured

Note: Reset router to factory defaults if it has been previously configured.

Browse to http://192.168.1.1/Upgrade.asp
Upload .bin file to router
Wait for it to reboot
Telnet to 192.168.1.1 and set a root password, or browse to http://192.168.1.1 if LuCI is installed.

→ generic.flashing.tftp

Specific values needed for tftp

Enter values for “FILL-IN” below

Bootloader tftp server IPv4 address	FILL-IN
Bootloader MAC address (special)	FILL-IN
Firmware tftp image	Latest OpenWrt release (`NOTE:` Name must contain “tftp”)
TFTP transfer window	FILL-IN seconds
TFTP window start	approximately FILL-IN seconds after power on
TFTP client required IP address	FILL-IN

→ generic.sysupgrade

These are generic instructions. Update with your router's specifics.

Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
Upload image file for sysupgrade to LuCI
Wait for reboot

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

sysupgrade
mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

Login as root via SSH on 192.168.1.1, then enter the following commands:

cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

Login as root via SSH on 192.168.1.1, then enter the following commands:

cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

→ generic.debrick

→ failsafe_and_factory_reset

→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Please fill in real values for this device, then remove the EXAMPLEs

The default network configuration is:

Interface Name	Description	Default configuration
br-lan	EXAMPLE LAN & WiFi	EXAMPLE 192.168.1.1/24
vlan0 (eth0.0)	EXAMPLE LAN ports (1 to 4)	EXAMPLE None
vlan1 (eth0.1)	EXAMPLE WAN port	EXAMPLE DHCP
wl0	EXAMPLE WiFi	EXAMPLE Disabled

Port	Switch port
Internet (WAN)	wan

→ hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

Please fill in real values for this device, then remove the EXAMPLEs

The TP-Link RE350 has the following buttons:

BUTTON	Event
EXAMPLE Reset	reset
EXAMPLE Secure Easy Setup	ses
EXAMPLE No buttons at all.	-

Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Backside label:
Insert photo of backside label

DANGER: HIGH VOLTAGE inside!
Opening this device exposes
parts under high voltage (110/230 VAC)!

Risk of deadly electrical shock
Risk of irreversable damage to other components attached, e.g. your PC connected via serial

Make sure to keep your fingers, conductive tools and serial cables away from the high voltage at all times!

Capacitors can still retain dangerous voltages
after disconnection from mains!

Continue at your own risk!

Note: This will void your warranty!

Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...

To remove the cover and open the device, do a/b/c

Main PCB:
Insert photo of PCB

→ port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

Replace EXAMPLE by real values.

Serial connection parameters for TP-Link RE350 v1	EXAMPLE 115200, 8N1

→ port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

→ bootloader

None so far.

=================================================================== MT7621 stage1 code Mar 12 2015 14:43:30 (ASIC) CPU=500000000 HZ BUS=125000000 HZ ================================================================== Change MPLL source from XTAL to CR... do MEMPLL setting.. MEMPLL Config : 0x11000000 3PLL mode + External loopback === XTAL-40Mhz === DDR-800Mhz === PLL3 FB_DL: 0x0, 1/0 = 877/147 01000000 PLL4 FB_DL: 0x13, 1/0 = 558/466 4D000000 PLL2 FB_DL: 0x18, 1/0 = 616/408 61000000 do DDR setting..[01F40000] Apply DDR2 Setting...(use default AC) 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 -------------------------------------------------------------------------------- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0008:| 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0009:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0010:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0011:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DRAMC_DQSCTL1[0e0]=1A000000 DRAMC_DQSGCTL[124]=80000000 rank 0 coarse = 8 rank 0 fine = 64 B:| 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 opt_dle value:5 DRAMC_DDR2CTL[07c]=40001253 DRAMC_PADCTL4[0e4]=00000005 DRAMC_DQIDLY1[210]=0D090A09 DRAMC_DQIDLY2[214]=0A0D090C DRAMC_DQIDLY3[218]=0F0E0C0A DRAMC_DQIDLY4[21c]=0D0A0D09 DRAMC_R0DELDLY[018]=00002D2E ================================================================== RX DQS perbit delay software calibration ================================================================== 1.0-15 bit dq delay value ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 9 9 7 11 10 7 13 7 9 12 10 | 12 14 9 13 10 13 -------------------------------------- ================================================================== 2.dqs window x=pass dqs delay value (min~max)center y=0-7bit DQ of every group input delay:DQS0 =46 DQS1 = 45 ================================================================== bit DQS0 bit DQS1 0 (2~91)46 8 (1~88)44 1 (1~89)45 9 (1~89)45 2 (1~88)44 10 (1~86)43 3 (1~88)44 11 (1~86)43 4 (1~87)44 12 (2~88)45 5 (1~88)44 13 (1~90)45 6 (2~90)46 14 (1~90)45 7 (1~86)43 15 (2~88)45 ================================================================== 3.dq delay value last ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 9 10 9 13 12 9 13 10 10 12 10 | 14 15 9 13 10 13 ================================================================== ================================================================== TX perbyte calibration ================================================================== DQS loop = 15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2 DQ loop=15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2 byte:0, (DQS,DQ)=(8,8) byte:1, (DQS,DQ)=(8,8) DRAMC_DQODLY1[200]=88888888 DRAMC_DQODLY2[204]=88888888 20,data:88 [EMI] DRAMC calibration passed =================================================================== MT7621 stage1 code done CPU=500000000 HZ BUS=125000000 HZ =================================================================== U-Boot 1.1.3 (May 16 2019 - 11:54:17) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb8000 Config XHCI 40M PLL flash manufacture id: ef, device id 40 17 find flash: W25Q64BV *** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 4.3.0.0 -------------------------------------------- ASIC MT7621A DualCore (MAC to MT7530 Mode) DRAM_CONF_FROM: Auto-Detection DRAM_TYPE: DDR2 DRAM bus: 16 bit Xtal Mode=3 OCP Ratio=1/4 Flash component: SPI Flash Date:May 16 2019 Time:11:54:17 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 880 MHZ #### estimate memory size =64 Mbytes #Reset_MT7530 Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. 0 3: System Boot system code via Flash. gpioMode Reg: 0x4852c ## Booting image at bfc20000 ... text base: 80001000 entry point: 8000d1d0 Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 8000d1d0) ... ## Giving linux memsize in MB, 64 Starting kernel ... LINUX started... THIS IS ASIC Linux version 2.6.36 (jenkins@Sohoiipf) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 SMP Thu May 16 11:59:49 CST 2019 The CPU feqenuce set to 880 MHz GCMP present CPU revision is: 0001992f (MIPS 1004Kc) Software DMA cache coherency Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00004000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00004000 Detected 3 available secondary CPU(s) PERCPU: Embedded 7 pages/cpu @81083000 s6208 r8192 d14272 u65536 pcpu-alloc: s6208 r8192 d14272 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 256kB, 8-way, linesize 32 bytes. Writing ErrCtl register=0005b133 Readback ErrCtl register=0005b133 Memory: 61896k/65536k available (2062k kernel code, 3640k reserved, 448k data, 168k init, 0k highmem) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:128 Trying to install interrupt handler for IRQ24 Trying to install interrupt handler for IRQ25 Trying to install interrupt handler for IRQ22 Trying to install interrupt handler for IRQ9 Trying to install interrupt handler for IRQ10 Trying to install interrupt handler for IRQ11 Trying to install interrupt handler for IRQ12 Trying to install interrupt handler for IRQ13 Trying to install interrupt handler for IRQ14 Trying to install interrupt handler for IRQ16 Trying to install interrupt handler for IRQ17 Trying to install interrupt handler for IRQ18 Trying to install interrupt handler for IRQ19 Trying to install interrupt handler for IRQ20 Trying to install interrupt handler for IRQ21 Trying to install interrupt handler for IRQ23 Trying to install interrupt handler for IRQ26 Trying to install interrupt handler for IRQ27 Trying to install interrupt handler for IRQ28 Trying to install interrupt handler for IRQ15 Trying to install interrupt handler for IRQ8 Trying to install interrupt handler for IRQ29 Trying to install interrupt handler for IRQ30 Trying to install interrupt handler for IRQ31 console [ttyS1] enabled Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 launch: starting cpu1 launch: cpu1 gone! CPU revision is: 0001992f (MIPS 1004Kc) Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 256kB, 8-way, linesize 32 bytes. launch: starting cpu2 launch: cpu2 gone! CPU revision is: 0001992f (MIPS 1004Kc) Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 256kB, 8-way, linesize 32 bytes. launch: starting cpu3 launch: cpu3 gone! CPU revision is: 0001992f (MIPS 1004Kc) Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 256kB, 8-way, linesize 32 bytes. Brought up 4 CPUs Synchronize counters across 4 CPUs: done. NET: Registered protocol family 16 release PCIe RST: RALINK_RSTCTRL = 7000000 PCIE PHY initialize ***** Xtal 40MHz ***** start MT7621 PCIe register access RALINK_RSTCTRL = 7000000 RALINK_CLKCFG1 = 77ffeff8 *************** MT7621 PCIe RC mode ************* PCIE2 no card, disable it(RST&CLK) pcie_link status = 0x3 RALINK_RSTCTRL= 3000000 *** Configure Device number setting of Virtual PCI-PCI bridge *** RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2 PCIE0 enabled PCIE1 enabled interrupt enable status: 300000 Port 1 N_FTS = 1b105000 Port 0 N_FTS = 1b105000 config reg done init_rt2880pci done bio: create slab <bio-0> at 0 pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000) pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000) pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff] pci 0000:00:00.0: BAR 1: set to [mem 0x60300000-0x6030ffff] (PCI address [0x60300000-0x6030ffff] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff] pci 0000:00:01.0: BAR 1: set to [mem 0x60310000-0x6031ffff] (PCI address [0x60310000-0x6031ffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff] (PCI address [0x60000000-0x600fffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] pci 0000:00:00.0: bridge window [mem pref disabled] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit] pci 0000:02:00.0: BAR 0: set to [mem 0x60100000-0x601fffff 64bit] (PCI address [0x60100000-0x601fffff] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref] pci 0000:00:01.0: PCI bridge to [bus 02-02] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff pref] PCI: Enabling device 0000:00:00.0 (0004 -> 0006) PCI: Enabling device 0000:00:01.0 (0004 -> 0006) BAR0 at slot 0 = 0 bus=0x0, slot = 0x0 BAR0 at slot 1 = 0 bus=0x0, slot = 0x1 bus=0x1, slot = 0x0, irq=0x4 bus=0x2, slot = 0x1, irq=0x18 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1 4 CPUs re-calibrate udelay(lpj = 1167360) Load Ralink Timer0 Module Load Ralink Timer1 Module Load Ralink Timer2 Module squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 120 io scheduler noop registered (default) Ralink gpio driver initialized Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A flash manufacture id: ef, device id 40 17 W25Q64BV(ef 40170000) (8192 Kbytes) mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 Creating 5 MTD partitions on "raspi": 0x000000000000-0x000000800000 : "ALL" 0x000000000000-0x000000020000 : "fs-uboot" 0x000000020000-0x000000110000 : "os-image" 0x000000110000-0x000000600000 : "file-system" 0x0000007f0000-0x000000800000 : "radio" rdm_major = 253 TCP cubic registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 168k freed init started: BusyBox v1.19.4 (2019-05-16 12:04:06 CST) starting pid 29, tty '': '/etc/rc.d/rcS' This Board use 2.6.36.x GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x432880b6 Ralink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500! GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x4328809c PROC INIT OK! Lan Domain: tplinkrepeater.net Lan Domain: www.tplinkrepeater.net tp_dhcp_hook: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint Raeth v3.1 (Tasklet) phy_free_head is 0x344a000!!! phy_free_tail_phy is 0x344bff0!!! txd_pool=a344c000 phy_txd_pool=0344C000 ei_local->skb_free start address is 0x83f25494. free_txd: a344c010, ei_local->cpu_ptr: 0344C000 POOL HEAD_PTR | DMA_PTR | CPU_PTR ----------------+---------+-------- 0xa344c000 0x0344C000 0x0344C000 phy_qrx_ring = 0x03447000, qrx_ring = 0xa3447000 phy_rx_ring0 = 0x0344e000, rx_ring0 = 0xa344e000 change HW-TRAP to 0x17ccf set LAN/WAN LLLLW Gpio Mode Value: 4852c Gpio Mode Value: 4852c GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x4328809c CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 device eth2 entered promiscuous mode br0: port 1(eth2) entering forwarding state br0: port 1(eth2) entering forwarding state ====>>>>====================ucWifi_json2Data================= ppm_fixed_once is 1 [ucEthernet_init:128]ERROR product_id= 03500100 ====>>>>caldata: 76 03 DE AD 76 12 DE AD ====>>>>default mac is 18-a6-f7-9e-50-1c ====>>>>default mac is 18-a6-f7-9e-50-1c ====>>>>====================ucWifi_data2Json================= ppm_fixed_once is 1 [daemonize:327]recv a pipe message. [main:539]send a pipe message. wifid[wifi_exec_cmd:1466]: mkdir -p /tmp/Wireless/RT2860 wifid[wifi_exec_cmd:1466]: cp /etc_ro/Wireless/RT2860/RT2860.dat /tmp/Wireless/RT2860/RT2860.dat httpMudCreate: MUD 0x4a8ee0 was created httpServerCreate: try to add port 80 wifid[wifi_exec_cmd:1466]: mkdir -p /tmp/Wireless/iNIC wifid[wifi_exec_cmd:1466]: cp /etc_ro/Wireless/iNIC/iNIC_ap.dat /tmp/Wireless/iNIC/iNIC_ap.dat wifid[wifi_exec_cmd:1466]: ifconfig eth2 down [smartip_get_wifi_update_eth_bridge_status 513] open /tmp/wifi_update_eth_and_bridge file failed ra2880stop()...Done Free TX/RX Ring Memory! br0: port 1(eth2) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig eth2 hw ether 18:A6:F7:9E:50:1C wifid[wifi_exec_cmd:1466]: ifconfig ethRaeth v3.1 (2 up Tasklet) phy_free_head is 0x36a2000!!! phy_free_tail_phy is 0x36a3ff0!!! txd_pool=a36a4000 phy_txd_pool=036A4000 ei_local->skb_free start address is 0x83f25494. free_txd: a36a4010, ei_local->cpu_ptr: 036A4000 POOL HEAD_PTR | DMA_PTR | CPU_PTR ----------------+---------+-------- 0xa36a4000 0x036A4000 0x036A4000 phy_qrx_ring = 0x036a0000, qrx_ring = 0xa36a0000 phy_rx_ring0 = 0x036b6000, rx_ring0 = 0xa36b6000 starting pid 12change HW-TRAP to 0x17ccf 0, tty '': '/sbiset LAN/WAN LLLLW n/getty ttyS1 57600' Gpio Mode Value: 4852c Gpio Mode Value: 4852c GMAC1_MAC_ADRH -- : 0x000018a6 GMAC1_MAC_ADRL -- : 0xf79e501c CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 br0: port 1(eth2) entering forwarding state br0: port 1(eth2) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig br0 down br0: port 1(eth2) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig br0 hw ether 18:A6:F7:9E:50:1C wifid[wifi_exec_cmd:1466]: ifconfig br0 up br0: port 1(eth2) entering forwarding state br0: port 1(eth2) entering forwarding state wifid[wifi_exec_cmd:1466]: insmod /lib/modules/2.6.36.x/kernel/mt_wifi.ko RE350 login: MT7603-->register mt_drv MT7603--> === pAd = c0682000, size = 1392776 === <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x <-- RTMPAllocAdapterBlock, Status=0 MT7603-->pAd->CSRBaseAddress =0xc0580000, csr_addr=0xc0580000! MT7603-->device_id =0x7603 MT7603-->RtmpChipOpsHook(507): Not support for HIF_MT yet! MT7603-->mt7603_init()--> MT7603-->mt_bcn_buf_init(224): Not support for HIF_MT yet! MT7603--><--mt7603_init() wifid[wifi_exec_cmd:1466]: insmod /lib/modules/2.6.36.x/kernel/rlt_wifi.ko MT7612E-->register rt2860 MT7612E--> === pAd = c0d82000, size = 1730528 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 MT7612E-->pAd->CSRBaseAddress =0xc0c80000, csr_addr=0xc0c80000! MT7612E-->device_id =0x7662 MT7612E-->==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a MT7612E-->====> mt76x2_ePA_per_rate_compensate_init: 5782 is_ePA: 1 MT7612E-->E2pAccessMode=2 MT7612E-->cfg_mode=14 MT7612E-->cfg_mode=14 MT7612E-->wmode_band_equal(): Band Not Equal! MT7612E-->APSDCapable[0]=0 MT7612E-->APSDCapable[1]=0 MT7612E-->APSDCapable[2]=0 MT7612E-->APSDCapable[3]=0 MT7612E-->APSDCapable[4]=0 MT7612E-->APSDCapable[5]=0 MT7612E-->APSDCapable[6]=0 MT7612E-->APSDCapable[7]=0 MT7612E-->APSDCapable[8]=0 MT7612E-->APSDCapable[9]=0 MT7612E-->APSDCapable[10]=0 MT7612E-->APSDCapable[11]=0 MT7612E-->APSDCapable[12]=0 MT7612E-->APSDCapable[13]=0 MT7612E-->APSDCapable[14]=0 MT7612E-->APSDCapable[15]=0 MT7612E-->default ApCliAPSDCapable[0]=0 MT7612E-->Key1Str is Invalid key length(0) or Type(0) MT7612E-->Key2Str is Invalid key length(0) or Type(0) MT7612E-->Key3Str is Invalid key length(0) or Type(0) MT7612E-->Key4Str is Invalid key length(0) or Type(0) MT7612E-->RTMPSetSingleSKUParameters - the country region is 5. MT7612E-->RTMPSetSingleSKUParameters - country code is DE . MT7612E-->RTMPSetSingleSKUParameters - country code is 44452002 MT7612E-->Loading SKU file: /etc_ro/Wireless/iNIC/SingleSKU_5G_CE.dat MT7612E-->RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 MT7612E-->NVM is FLASH mode (pAd->flash_offset = 0x48000) MT7612E-->get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai wifid[wifi_exec_cmd:1466]: smp.sh wifi wifid[wifi_exec_cmd:1466]: ifconfig ra0 up MT7603-->TX_BCN DESC a24b1000 size = 320 MT7603-->RX[0] DESC a24b3000 size = 2048 MT7603-->RX[1] DESC a24b4000 size = 2048 MT7603-->E2pAccessMode=2 MT7603-->CountryCode=DE MT7603-->cfg_mode=9 MT7603-->cfg_mode=9 MT7603-->wmode_band_equal(): Band Equal! MT7603-->APSDCapable[0]=0 MT7603-->APSDCapable[1]=0 MT7603-->APSDCapable[2]=0 MT7603-->APSDCapable[3]=0 MT7603-->APSDCapable[4]=0 MT7603-->APSDCapable[5]=0 MT7603-->APSDCapable[6]=0 MT7603-->APSDCapable[7]=0 MT7603-->APSDCapable[8]=0 MT7603-->APSDCapable[9]=0 MT7603-->APSDCapable[10]=0 MT7603-->APSDCapable[11]=0 MT7603-->APSDCapable[12]=0 MT7603-->APSDCapable[13]=0 MT7603-->APSDCapable[14]=0 MT7603-->APSDCapable[15]=0 MT7603-->default ApCliAPSDCapable[0]=0 MT7603-->Key1Str is Invalid key length(0) or Type(0) MT7603-->Key2Str is Invalid key length(0) or Type(0) MT7603-->Key3Str is Invalid key length(0) or Type(0) MT7603-->Key4Str is Invalid key length(0) or Type(0) MT7603-->Smart Carrier Sense = 1 MT7603-->RTMPSetSingleSKUParameters - the country region is 5. MT7603-->RTMPSetSingleSKUParameters - country code is DE MT7603-->RTMPSetSingleSKUParameters - the country DFSType is 0. MT7603-->Loading SKU file: /etc_ro/Wireless/RT2860/SingleSKU_2G_CE.dat MT7603-->FW Version:_mt7603mp MT7603-->FW Build Date:20150624233050 MT7603-->CmdAddressLenReq:(ret = 0) MT7603-->CmdFwStartReq: override = 1, address = 1048576 MT7603-->CmdStartDLRsp: WiFI FW Download Success MT7603-->AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 MT7603-->RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 MT7603-->RtmpEepromGetDefault::e2p_dafault=1 MT7603-->RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 MT7603-->NVM is FLASH mode, flash_offset = 0x40000 MT7603-->1. Phy Mode = 14 MT7603-->@@@ NICReadEEPROMParameters : pAd->FWLoad=0 MT7603-->Country Region from e2p = ffff tssi_1_target_pwr_g_band = 21 MT7603-->2. Phy Mode = 14 MT7603-->3. Phy Mode = 14 MT7603-->NICInitPwrPinCfg(14): Not support for HIF_MT yet! MT7603-->NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet! MT7603-->mt_mac_init()--> MT7603-->mt7603_init_mac_cr()--> MT7603-->AsicSetMacMaxLen(1942): Set the Max RxPktLen=1024! MT7603--><--mt_mac_init() MT7603--> WTBL Segment 1 info: MT7603--> MemBaseAddr/FID:0x28000/0 MT7603--> EntrySize/Cnt:32/128 MT7603--> WTBL Segment 2 info: MT7603--> MemBaseAddr/FID:0x40000/0 MT7603--> EntrySize/Cnt:64/128 MT7603--> WTBL Segment 3 info: MT7603--> MemBaseAddr/FID:0x42000/64 MT7603--> EntrySize/Cnt:64/128 MT7603--> WTBL Segment 4 info: MT7603--> MemBaseAddr/FID:0x44000/128 MT7603--> EntrySize/Cnt:32/128 MT7603-->MtAsicACQueue: Write CR:21510, Value=10421 MT7603-->MtAsicACQueue: Write CR:21500, Value=10421 MT7603-->AntCfgInit(2582): Not support for HIF_MT yet! MT7603-->MCS Set = ff ff 00 00 01 MT7603-->AsicSetRalinkBurstMode(4279): Not support for HIF_MT yet! MT7603-->RTMPSetPiggyBack(933): Not support for HIF_MT yet! MT7603-->mt7603_switch_channel(): Switch to Ch#4(2T2R), BBP_BW=1 MT7603-->AsicSetTxPreamble(4266): Not support for HIF_MT yet! MT7603-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7603-->AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 MT7603-->Main bssid = 18:a6:f7:9e:50:1d <==== rt28xx_init, Status=0 MT7603-->@@@ ed_monitor_init : ===> MT7603-->@@@ ed_monitor_init : <=== MT7603-->mt7603_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f, EDCCA_Status=1 Number of Packet Allocated in open = 306 Number of Packet Freed in open = 48 MT7603-->WiFi Startup Cost (ra0): 1.188s wifid[wifi_exec_cmd:1466]: brctl addif br0 ra0 device ra0 entered promiscuous mode br0: port 2(ra0) entering forwarding state br0: port 2(ra0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconMT7603-->fig apcli0 up The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 wifid[wifi_exec_cmd:1466]: brctl addif br0 apclidevice apcli0 entered promiscuous mode 0 br0: port 3(apcli0) entering forwarding state br0: port 3(apcli0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconMT7612E-->fig rai0 up build time = 20141115060606a MT7612E-->rom patch for E3 IC MT7612E--> MT7612E-->platform = ALPS MT7612E-->hw/sw version = ▒▒ MT7612E-->patch version = MT7612E-->FW Version:0.0.00 MT7612E-->Build:1 MT7612E-->Build Time:201511101431____ MT7612E-->fw for E3 IC MT7612E-->RX[0] DESC a1cc5000 size = 4096 MT7612E-->RX[1] DESC a1cc6000 size = 4096 MT7612E-->E2pAccessMode=2 MT7612E-->cfg_mode=14 MT7612E-->cfg_mode=14 MT7612E-->wmode_band_equal(): Band Not Equal! MT7612E-->APSDCapable[0]=0 MT7612E-->APSDCapable[1]=0 MT7612E-->APSDCapable[2]=0 MT7612E-->APSDCapable[3]=0 MT7612E-->APSDCapable[4]=0 MT7612E-->APSDCapable[5]=0 MT7612E-->APSDCapable[6]=0 MT7612E-->APSDCapable[7]=0 MT7612E-->APSDCapable[8]=0 MT7612E-->APSDCapable[9]=0 MT7612E-->APSDCapable[10]=0 MT7612E-->APSDCapable[11]=0 MT7612E-->APSDCapable[12]=0 MT7612E-->APSDCapable[13]=0 MT7612E-->APSDCapable[14]=0 MT7612E-->APSDCapable[15]=0 MT7612E-->default ApCliAPSDCapable[0]=0 MT7612E-->Key1Str is Invalid key length(0) or Type(0) MT7612E-->Key2Str is Invalid key length(0) or Type(0) MT7612E-->Key3Str is Invalid key length(0) or Type(0) MT7612E-->Key4Str is Invalid key length(0) or Type(0) MT7612E-->RTMPSetSingleSKUParameters - the country region is 5. MT7612E-->RTMPSetSingleSKUParameters - country code is DE . MT7612E-->RTMPSetSingleSKUParameters - country code is 44452002 MT7612E-->Loading SKU file: /etc_ro/Wireless/iNIC/SingleSKU_5G_CE.dat MT7612E-->1. Phy Mode = 49 MT7612E-->get_chl_grp:illegal channel (167) MT7612E-->get_chl_grp:illegal channel (167) MT7612E-->get_chl_grp:illegal channel (169) MT7612E-->get_chl_grp:illegal channel (169) MT7612E-->get_chl_grp:illegal channel (171) MT7612E-->get_chl_grp:illegal channel (171) Mt7612E--> mt76x2_read_chl_pwr:2931 assert (ad->TxPower[choffset].Channel == 42)failed MT7612E-->Country Region from e2p = ffff MT7612E-->mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0 MT7612E-->mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff88, ALNAGain1=0xffffff88, ALNAGain2=0xffffff89 MT7612E-->2. Phy Mode = 49 MT7612E-->3. Phy Mode = 49 MT7612E-->andes_pci_fw_init MT7612E-->0x1300 = 00073200 MT7612E-->AntCfgInit: primary/secondary ant 0/1 MT7612E-->andes_load_cr:cr_type(2) MT7612E-->ChipStructAssign(): MT76x2 hook ! MT7612E-->MCS Set = ff ff 00 00 01 MT7612E-->mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 MT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== MT7612E-->Main bssid = 18:a6:f7:9e:50:1e MT7612E-->mt76x2_reinit_agc_gain:original agc_vga0 = 0x50, agc_vga1 = 0x50 MT7612E-->mt76x2_reinit_agc_gain:updated agc_vga0 = 0x50, agc_vga1 = 0x50 MT7612E-->mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x2f, hi_lna1 = 0x2f MT7612E-->mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x2f, hi_lna1 = 0x2f MT7612E-->original vga value(chain0) = 50 MT7612E-->original vga value(chain1) = 50 <==== rt28xx_init, Status=0 MT7612E-->get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=apclii MT7612E-->RTMPDrvOpen(1):Check if PDMA is idle! MT7612E-->RTMPDrvOpen(2):Check if PDMA is idle! MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== Number of Packet Allocated in open = 527 Number of Packet Freed in open = 14 device rai0 entered promiscuous modeif br0 rai0 br0: port 4(rai0) entering forwarding state br0: port 4(rai0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig apclii0 up wifid[wifi_exec_cmd:1466]: brctl addif br0 apclidevice apclii0 entered promiscuous mode i0 br0: port 5(apclii0) entering forwarding state br0: port 5(apclii0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig apcli0 down br0: port 3(apcli0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig ra0 down MT7603-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7603-->MTPciPollTxRxEmpty MT7603-->AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 MT7603-->RTMPSetPiggyBack(933): Not support for HIF_MT yet! MT7603-->RT28xxPciAsicRadioOff(): Not support for HIF_MT yet! MT7603-->RTMPDrvClose call RT28xxPciAsicRadioOff fail !! MT7603-->tx_kickout_fail_count = 0 MT7603-->tx_timeout_fail_count = 0 MT7603-->rx_receive_fail_count = 0 MT7603-->alloc_cmd_msg = 40 MT7603-->free_cmd_msg = 40 br0: port 2(ra0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig ra0 up MT7603-->TX_BCN DESC a24b1000 size = 320 MT7603-->RX[0] DESC a24b3000 size = 2048 MT7603-->RX[1] DESC a24b4000 size = 2048 MT7603-->E2pAccessMode=2 MT7603-->CountryCode=DE MT7603-->cfg_mode=9 MT7603-->cfg_mode=9 MT7603-->wmode_band_equal(): Band Equal! MT7603-->APSDCapable[0]=0 MT7603-->APSDCapable[1]=0 MT7603-->APSDCapable[2]=0 MT7603-->APSDCapable[3]=0 MT7603-->APSDCapable[4]=0 MT7603-->APSDCapable[5]=0 MT7603-->APSDCapable[6]=0 MT7603-->APSDCapable[7]=0 MT7603-->APSDCapable[8]=0 MT7603-->APSDCapable[9]=0 MT7603-->APSDCapable[10]=0 MT7603-->APSDCapable[11]=0 MT7603-->APSDCapable[12]=0 MT7603-->APSDCapable[13]=0 MT7603-->APSDCapable[14]=0 MT7603-->APSDCapable[15]=0 MT7603-->default ApCliAPSDCapable[0]=0 MT7603-->Key1Str is Invalid key length(0) or Type(0) MT7603-->Key2Str is Invalid key length(0) or Type(0) MT7603-->Key3Str is Invalid key length(0) or Type(0) MT7603-->Key4Str is Invalid key length(0) or Type(0) MT7603-->Smart Carrier Sense = 1 MT7603-->RTMPSetSingleSKUParameters - the country region is 5. MT7603-->RTMPSetSingleSKUParameters - country code is DE MT7603-->RTMPSetSingleSKUParameters - the country DFSType is 0. MT7603-->Loading SKU file: /etc_ro/Wireless/RT2860/SingleSKU_2G_CE.dat MT7603-->FW Version:_mt7603mp MT7603-->FW Build Date:20150624233050 MT7603-->AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 MT7603-->RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 MT7603-->RtmpEepromGetDefault::e2p_dafault=1 MT7603-->RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 MT7603-->NVM is FLASH mode, flash_offset = 0x40000 MT7603-->1. Phy Mode = 14 MT7603-->@@@ NICReadEEPROMParameters : pAd->FWLoad=1 MT7603-->Country Region from e2p = ffff tssi_1_target_pwr_g_band = 21 MT7603-->2. Phy Mode = 14 MT7603-->3. Phy Mode = 14 MT7603-->NICInitPwrPinCfg(14): Not support for HIF_MT yet! MT7603-->NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet! MT7603-->mt_mac_init()--> MT7603-->mt7603_init_mac_cr()--> MT7603-->AsicSetMacMaxLen(1942): Set the Max RxPktLen=1024! MT7603--><--mt_mac_init() MT7603--> WTBL Segment 1 info: MT7603--> MemBaseAddr/FID:0x28000/0 MT7603--> EntrySize/Cnt:32/128 MT7603--> WTBL Segment 2 info: MT7603--> MemBaseAddr/FID:0x40000/0 MT7603--> EntrySize/Cnt:64/128 MT7603--> WTBL Segment 3 info: MT7603--> MemBaseAddr/FID:0x42000/64 MT7603--> EntrySize/Cnt:64/128 MT7603--> WTBL Segment 4 info: MT7603--> MemBaseAddr/FID:0x44000/128 MT7603--> EntrySize/Cnt:32/128 MT7603-->MtAsicACQueue: Write CR:21510, Value=10421 MT7603-->MtAsicACQueue: Write CR:21500, Value=10421 MT7603-->AntCfgInit(2582): Not support for HIF_MT yet! MT7603-->MCS Set = ff ff 00 00 01 MT7603-->AsicSetRalinkBurstMode(4279): Not support for HIF_MT yet! MT7603-->RTMPSetPiggyBack(933): Not support for HIF_MT yet! MT7603-->mt7603_switch_channel(): Switch to Ch#4(2T2R), BBP_BW=1 MT7603-->AsicSetTxPreamble(4266): Not support for HIF_MT yet! MT7603-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7603-->AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 MT7603-->Main bssid = 18:a6:f7:9e:50:1d <==== rt28xx_init, Status=0 MT7603-->@@@ ed_monitor_init : ===> MT7603-->@@@ ed_monitor_init : <=== MT7603-->mt7603_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f, EDCCA_Status=1 Number of Packet Allocated in open = 636 Number of Packet Freed in open = 378 MT7603-->WiFi Startup Cost (ra0): 0.796s br0: port 2(ra0) entering forwarding state br0: port 2(ra0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconMT7603-->fig apcli0 up The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 br0: port 3(apcli0) entering forwarding state br0: port 3(apcli0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig apclii0 down br0: port 5(apclii0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig rai0 down MT7612E-->@@@ APStop: go to ed_monitor_exit()!! MT7612E-->@@@ ed_monitor_exit : ===> MT7612E-->@@@ ed_monitor_exit : <=== ERROR!!! MlmeEnqueue: fRTMP_ADAPTER_HALT_IN_PROGRESS MT7612E-->andes_pci_erasefw 201511101431____ MT7612E-->==>rlt_wlan_chip_onoff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0x20b, Reg-WlanFunCtrl=0x20b MT7612E-->RTMP_TimerListRelease: release timer obj c0d92390! MT7612E-->RTMP_TimerListRelease: release timer obj c0ea2dec! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1a6e0! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cf2c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cfc0! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d054! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d0e8! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d17c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d210! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d2a4! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d338! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d3cc! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d460! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d4f4! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d588! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d61c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d6b0! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d744! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d7d8! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1a6b4! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1a70c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cf00! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cf94! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d028! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d0bc! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d150! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d1e4! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d278! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d30c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d3a0! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d434! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d4c8! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d55c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d5f0! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d684! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d718! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1d7ac! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1a688! MT7612E-->RTMP_TimerListRelease: release timer obj c0d96428! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9600c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d963f8! MT7612E-->RTMP_TimerListRelease: release timer obj c0d96738! MT7612E-->RTMP_TimerListRelease: release timer obj c0d96674! MT7612E-->RTMP_TimerListRelease: release timer obj c0d966a4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d996d4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d992b8! MT7612E-->RTMP_TimerListRelease: release timer obj c0d996a4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d999e4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d99920! MT7612E-->RTMP_TimerListRelease: release timer obj c0d99950! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9c980! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9c564! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9c950! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9cc90! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9cbcc! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9cbfc! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9fc2c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9f810! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9fbfc! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9ff3c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9fe78! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9fea8! MT7612E-->RTMP_TimerListRelease: release timer obj c0da2ed8! MT7612E-->RTMP_TimerListRelease: release timer obj c0da2abc! MT7612E-->RTMP_TimerListRelease: release timer obj c0da2ea8! MT7612E-->RTMP_TimerListRelease: release timer obj c0da31e8! MT7612E-->RTMP_TimerListRelease: release timer obj c0da3124! MT7612E-->RTMP_TimerListRelease: release timer obj c0da3154! MT7612E-->RTMP_TimerListRelease: release timer obj c0da6184! MT7612E-->RTMP_TimerListRelease: release timer obj c0da5d68! MT7612E-->RTMP_TimerListRelease: release timer obj c0da6154! MT7612E-->RTMP_TimerListRelease: release timer obj c0da6494! MT7612E-->RTMP_TimerListRelease: release timer obj c0da63d0! MT7612E-->RTMP_TimerListRelease: release timer obj c0da6400! MT7612E-->RTMP_TimerListRelease: release timer obj c0da9430! MT7612E-->RTMP_TimerListRelease: release timer obj c0da9014! MT7612E-->RTMP_TimerListRelease: release timer obj c0da9400! MT7612E-->RTMP_TimerListRelease: release timer obj c0da9740! MT7612E-->RTMP_TimerListRelease: release timer obj c0da967c! MT7612E-->RTMP_TimerListRelease: release timer obj c0da96ac! MT7612E-->RTMP_TimerListRelease: release timer obj c0dac6dc! MT7612E-->RTMP_TimerListRelease: release timer obj c0dac2c0! MT7612E-->RTMP_TimerListRelease: release timer obj c0dac6ac! MT7612E-->RTMP_TimerListRelease: release timer obj c0dac9ec! MT7612E-->RTMP_TimerListRelease: release timer obj c0dac928! MT7612E-->RTMP_TimerListRelease: release timer obj c0dac958! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cb64! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1c748! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cb34! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1ce74! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cb94! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cbc4! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1cbf4! MT7612E-->RTMP_TimerListRelease: release timer obj c0e4eb6c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e4ec5c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e4eb98! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1e92c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d93878! MT7612E-->RTMP_TimerListRelease: release timer obj c0d96b24! MT7612E-->RTMP_TimerListRelease: release timer obj c0d99dd0! MT7612E-->RTMP_TimerListRelease: release timer obj c0d9d07c! MT7612E-->RTMP_TimerListRelease: release timer obj c0da0328! MT7612E-->RTMP_TimerListRelease: release timer obj c0da35d4! MT7612E-->RTMP_TimerListRelease: release timer obj c0da6880! MT7612E-->RTMP_TimerListRelease: release timer obj c0da9b2c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e1e640! MT7612E-->RTMP_TimerListRelease: release timer obj c0e27ce0! MT7612E-->RTMP_TimerListRelease: release timer obj c0f28784! br0: port 4(rai0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconfig rai0 up MT7612E--> ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x208, Reg-WlanFunCtrl=0x209 MT7612E-->build time = 20141115060606a MT7612E-->rom patch for E3 IC MT7612E--> MT7612E-->platform = ALPS MT7612E-->hw/sw version = ▒▒ MT7612E-->patch version = MT7612E-->FW Version:0.0.00 MT7612E-->Build:1 MT7612E-->Build Time:201511101431____ MT7612E-->fw for E3 IC MT7612E-->RX[0] DESC a1cc5000 size = 4096 MT7612E-->RX[1] DESC a1cc6000 size = 4096 MT7612E-->E2pAccessMode=2 MT7612E-->cfg_mode=14 MT7612E-->cfg_mode=14 MT7612E-->wmode_band_equal(): Band Not Equal! MT7612E-->APSDCapable[0]=0 MT7612E-->APSDCapable[1]=0 MT7612E-->APSDCapable[2]=0 MT7612E-->APSDCapable[3]=0 MT7612E-->APSDCapable[4]=0 MT7612E-->APSDCapable[5]=0 MT7612E-->APSDCapable[6]=0 MT7612E-->APSDCapable[7]=0 MT7612E-->APSDCapable[8]=0 MT7612E-->APSDCapable[9]=0 MT7612E-->APSDCapable[10]=0 MT7612E-->APSDCapable[11]=0 MT7612E-->APSDCapable[12]=0 MT7612E-->APSDCapable[13]=0 MT7612E-->APSDCapable[14]=0 MT7612E-->APSDCapable[15]=0 MT7612E-->default ApCliAPSDCapable[0]=0 MT7612E-->Key1Str is Invalid key length(0) or Type(0) MT7612E-->Key2Str is Invalid key length(0) or Type(0) MT7612E-->Key3Str is Invalid key length(0) or Type(0) MT7612E-->Key4Str is Invalid key length(0) or Type(0) MT7612E-->RTMPSetSingleSKUParameters - the country region is 5. MT7612E-->RTMPSetSingleSKUParameters - country code is DE . MT7612E-->RTMPSetSingleSKUParameters - country code is 44452002 MT7612E-->Loading SKU file: /etc_ro/Wireless/iNIC/SingleSKU_5G_CE.dat KiTTYMT7612E-->1. Phy Mode = 49 MT7612E-->get_chl_grp:illegal channel (167) MT7612E-->get_chl_grp:illegal channel (167) MT7612E-->get_chl_grp:illegal channel (169) MT7612E-->get_chl_grp:illegal channel (169) MT7612E-->get_chl_grp:illegal channel (171) MT7612E-->get_chl_grp:illegal channel (171) Mt7612E--> mt76x2_read_chl_pwr:2931 assert (ad->TxPower[choffset].Channel == 42)failed MT7612E-->Country Region from e2p = ffff MT7612E-->mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0 MT7612E-->mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff88, ALNAGain1=0xffffff88, ALNAGain2=0xffffff89 MT7612E-->2. Phy Mode = 49 MT7612E-->3. Phy Mode = 49 MT7612E-->andes_pci_fw_init MT7612E-->0x1300 = 00064380 MT7612E-->AntCfgInit: primary/secondary ant 0/1 MT7612E-->andes_load_cr:cr_type(2) MT7612E-->ChipStructAssign(): MT76x2 hook ! MT7612E-->MCS Set = ff ff 00 00 01 MT7612E-->mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 MT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== MT7612E-->Main bssid = 18:a6:f7:9e:50:1e MT7612E-->mt76x2_reinit_agc_gain:original agc_vga0 = 0x50, agc_vga1 = 0x50 MT7612E-->mt76x2_reinit_agc_gain:updated agc_vga0 = 0x50, agc_vga1 = 0x50 MT7612E-->mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x2f, hi_lna1 = 0x2f MT7612E-->mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x2f, hi_lna1 = 0x2f MT7612E-->original vga value(chain0) = 50 MT7612E-->original vga value(chain1) = 50 <==== rt28xx_init, Status=0 MT7612E-->RTMPDrvOpen(1):Check if PDMA is idle! MT7612E-->RTMPDrvOpen(2):Check if PDMA is idle! MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== Number of Packet Allocated in open = 1056 Number of Packet Freed in open = 543 br0: port 4(rai0) entering forwarding state br0: port 4(rai0) entering forwarding state wifid[wifi_exec_cmd:1466]: ifconbr0: port 5(apclii0) entering forwarding state fig apclii0 up br0: port 5(apclii0) entering forwarding state wifid[mtk_fix_ppm_error:2601]: ===========================check if need to fix ppm problem. wifid[mtk_fix_ppm_error:2627]: ===========================execute fix_ppm(). wifid[fix_ppm:2543]: ===========================wrpMemPoolMonitor. ====>>>>==============>opWifi_PPM_flag_getCfg<================ wifid[fix_ppm:2559]: ===========found ppm fixed before and returned!!!! wifid[wifi_exec_cmd:1466]: iwpriv ra0 set RTSThreshold=2346 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set FragThreshold=2346 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set BeaconPeriod=100 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set DtimPeriod=1 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set HtGi=1 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set BasicRaMT7603-->te=15 wifidAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 [wifi_exec_cmd:1MT7603-->466]: iwpriv ra0RTMPSetPiggyBack(933): Not support for HIF_MT yet! set HtBssCoex=1MT7603--> wifid[wifiAsicSetRalinkBurstMode(4279): Not support for HIF_MT yet! _exec_cmd:1466]:MT7603--> iwpriv ra0 set RTMPSetPiggyBack(933): Not support for HIF_MT yet! HtAmsdu=0 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set WmmCapable=1 wifid[wifi_exec_cmd:1466]: iwpriv ra0MT7603--> set NoForwardinmt7603_switch_channel(): Switch to Ch#4(2T2R), BBP_BW=1 g=0 wifid[wMT7603-->ifi_exec_cmd:146AsicSetTxPreamble(4266): Not support for HIF_MT yet! 6]: iwpriv ra0 sMT7603-->et NoForwardingBThe 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 TNBSSID=0 wMT7603-->ifid[wifi_exec_cAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 md:1466]: iwprivMT7603--> ra0 set SSID=\RMain bssid = 18:a6:f7:9e:50:1d \o\s \-\G wifid[wifi_exec_cmd:1466]: iwpriv rai0 set RTSThreshold=2346 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set FragThreshold=2346 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set BeaconPeriod=100 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set DtimPeriod=1 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set HtGi=1 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set BasicRate=15 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set HtBssCoex=1 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set HtAmsdu=0 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set WmmCapabMT7612E-->le=1 wifid[@@@ APStop: go to ed_monitor_exit()!! wifi_exec_cmd:14MT7612E-->66]: iwpriv rai0@@@ ed_monitor_exit : ===> set NoForwardinMT7612E-->g=0 wifid[w@@@ ed_monitor_exit : <=== ifi_exec_cmd:146MT7612E-->6]: iwpriv rai0 mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 set NoForwardingBTNBSSID=0 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set SSID=\R\o\s \-\G KiTTYMT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== wifid[wifi_exec_cmd:1466]: iwpriv rai0 set CountryCode=DE wifid[wifi_exec_cmd:1466]: iwpriv rai0 set CountryRegionABand=18 wifid[wifi_exec_cmd:1466]: iwpriv apclii0 set ApCliEnable=MT7612E-->0 wifid[wifcfg_mode=14 i_exec_cmd:1466]MT7612E-->: iwpriv rai0 sewmode_band_equal(): Band Equal! t WirelessMode=14 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set HtBw=1 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set VhtBw=1 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set TxPower=100 wifid[wifi_exec_cmd:MT7612E-->1466]: iwpriv ra@@@ APStop: go to ed_monitor_exit()!! i0 set SSID=\R\oMT7612E-->\s \-\G @@@ ed_monitor_exit : ===> MT7612E-->@@@ ed_monitor_exit : <=== MT7612E-->Kimt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 TTYMT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== wifid[wifi_exec_cmd:1466]: iwpriv rai0 set AuthMode=WPA2PSK wifid[wifi_exec_cmd:1466]: iwpriv rai0 set EncrypType=TKIPAES wifid[wifi_exec_cmd:1466]: iwpriv rai0 set IMT7612E-->EEE8021X=0 @@@ APStop: go to ed_monitor_exit()!! wifid[wifi_exec_MT7612E-->cmd:1466]: iwpri@@@ ed_monitor_exit : ===> v rai0 set SSID=MT7612E-->\R\o\s \-\G @@@ ed_monitor_exit : <=== KiTTYMT7612E-->mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 MT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== wifid[wifi_exec_cmd:1466]: iwpriv rai0 set WPAPSK=\8\9 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set DefaultKeyID=2 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set RekeyInterval=0 wifid[wifi_exec_cmd:1466]: iwpriv rai0 set HideSSID=0 wifid[wifi_exec_cmd:1MT7612E-->466]: iwpriv rai@@@ APStop: go to ed_monitor_exit()!! 0 set SSID=\R\o\MT7612E-->s \-\G @@@ ed_monitor_exit : ===> MT7612E-->@@@ ed_monitor_exit : <=== MT7612E-->mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 MT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== KiTTYwifid[wifi_exec_cmd:1466]: iwpriv apclii0 set ApCliEnable=0 wifid[wifi_exec_cmd:1466]: iwpriv apclii0 set MACRepeaterEn=1 wifid[wifi_exec_cmd:1466]: iwpriv apclii0 set ApCliAuthMode=WPAPSKWPA2PSK wifid[wifi_exec_cmd:1466]: iwpriv apclii0 set ApCliEncrypType=TKIPAES wifid[wifi_exec_cmd:1466]: iwpriv apclii0 set ApCliSsid=\R\o\s \-\G wifid[wifi_exec_cmd:1466]: iwpriv apclii0 set ApCliWPAPSK=\8\9 KiTTYwifid[wifi_exec_cmd:1466]: iwpriv apclii0 set ApCliSsid=\R\o\s \-\G wifid[wifi_exec_cmd:1466]: iwpriv apclii0 set ApCliEnable=1 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set CountryCode=DE KiTTYwifid[wifi_exec_cmd:1466]: iwpriv ra0 set CountryRegion=1 wifMT7603-->id[wifi_exec_cmdcfg_mode=9 :1466]: iwpriv aMT7603-->pcli0 set ApCliEwmode_band_equal(): Band Equal! nable=0 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set WirelessMode=9 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set HtBw=1 wifid[wifi_exec_cmd:1466]: iwprMT7603-->iv ra0 set TxPowAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 er=100 wifiMT7603-->d[wifi_exec_cmd:RTMPSetPiggyBack(933): Not support for HIF_MT yet! 1466]: iwpriv raMT7603-->0 set SSID=\R\o\AsicSetRalinkBurstMode(4279): Not support for HIF_MT yet! s \-\G MT7603-->RTMPSetPiggyBack(933): Not support for HIF_MT yet! MT7603-->mt7603_switch_channel(): Switch to Ch#4(2T2R), BBP_BW=1 MT7603-->AsicSetTxPreamble(4266): Not support for HIF_MT yet! MT7603-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7603-->AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 MT7603-->Main bssid = 18:a6:f7:9e:50:1d wifid[wifi_exec_cmd:1466]: iwpriv ra0 set AuthMode=WPA2PSK wifid[wifi_exec_cmd:1466]: iwpriv ra0 set EncrypType=TKIPAES wifid[wifi_exec_cmd:1466]: iwpriv ra0 set IEEEMT7603-->8021X=0 wifAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 id[wifi_exec_cmdMT7603-->:1466]: iwpriv rRTMPSetPiggyBack(933): Not support for HIF_MT yet! a0 set SSID=\R\oMT7603-->\s \-\G AsicSetRalinkBurstMode(4279): Not support for HIF_MT yet! MT7603-->RTMPSetPiggyBack(933): Not support for HIF_MT yet! MT7603-->mt7603_switch_channel(): Switch to Ch#4(2T2R), BBP_BW=1 MT7603-->AsicSetTxPreamble(4266): Not support for HIF_MT yet! MT7603-->AsicAddSharedKeyEntry(2108): Not support for HIF_MT yet! MT7603-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7603-->AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 MT7603-->Main bssid = 18:a6:f7:9e:50:1d wifid[wifi_exec_cmd:1466]: iwpriv ra0 set WPAPSK=\8\9 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set DefaultKeyID=2 wifid[wifi_exec_cmd:1466]: iwpriv ra0 set RekeyInterval=0

=================================================================== MT7621 stage1 code Mar 12 2015 14:43:30 (ASIC) CPU=500000000 HZ BUS=125000000 HZ ================================================================== Change MPLL source from XTAL to CR... do MEMPLL setting.. MEMPLL Config : 0x11000000 3PLL mode + External loopback === XTAL-40Mhz === DDR-800Mhz === PLL3 FB_DL: 0x0, 1/0 = 878/146 01000000 PLL4 FB_DL: 0x13, 1/0 = 594/430 4D000000 PLL2 FB_DL: 0x18, 1/0 = 576/448 61000000 do DDR setting..[01F40000] Apply DDR2 Setting...(use default AC) 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 -------------------------------------------------------------------------------- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007:| 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0008:| 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0009:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0010:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0011:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DRAMC_DQSCTL1[0e0]=1A000000 DRAMC_DQSGCTL[124]=80000000 rank 0 coarse = 8 rank 0 fine = 64 B:| 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 opt_dle value:5 DRAMC_DDR2CTL[07c]=40001253 DRAMC_PADCTL4[0e4]=00000005 DRAMC_DQIDLY1[210]=0D090B09 DRAMC_DQIDLY2[214]=0A0E090D DRAMC_DQIDLY3[218]=0F0E0E0B DRAMC_DQIDLY4[21c]=0D0A0D0A DRAMC_R0DELDLY[018]=00002D2E ================================================================== RX DQS perbit delay software calibration ================================================================== 1.0-15 bit dq delay value ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 9 9 7 11 10 7 13 7 9 12 10 | 12 14 9 13 10 13 -------------------------------------- ================================================================== 2.dqs window x=pass dqs delay value (min~max)center y=0-7bit DQ of every group input delay:DQS0 =46 DQS1 = 45 ================================================================== bit DQS0 bit DQS1 0 (2~90)46 8 (1~86)43 1 (1~88)44 9 (1~86)43 2 (1~88)44 10 (1~86)43 3 (1~88)44 11 (1~86)43 4 (1~86)43 12 (2~86)44 5 (1~87)44 13 (1~89)45 6 (2~89)45 14 (1~90)45 7 (1~86)43 15 (2~89)45 ================================================================== 3.dq delay value last ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 9 11 9 13 13 9 14 10 11 14 10 | 14 15 10 13 10 13 ================================================================== ================================================================== TX perbyte calibration ================================================================== DQS loop = 15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2 DQ loop=15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2 byte:0, (DQS,DQ)=(8,8) byte:1, (DQS,DQ)=(8,8) DRAMC_DQODLY1[200]=88888888 DRAMC_DQODLY2[204]=88888888 20,data:88 [EMI] DRAMC calibration passed =================================================================== MT7621 stage1 code done CPU=500000000 HZ BUS=125000000 HZ =================================================================== U-Boot 1.1.3 (May 16 2019 - 11:54:17) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb8000 Config XHCI 40M PLL ****************************** Software System Reset Occurred ****************************** flash manufacture id: ef, device id 40 17 find flash: W25Q64BV *** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 4.3.0.0 -------------------------------------------- ASIC MT7621A DualCore (MAC to MT7530 Mode) DRAM_CONF_FROM: Auto-Detection DRAM_TYPE: DDR2 DRAM bus: 16 bit Xtal Mode=3 OCP Ratio=1/4 Flash component: SPI Flash Date:May 16 2019 Time:11:54:17 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 880 MHZ #### estimate memory size =64 Mbytes #Reset_MT7530 Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. 0 3: System Boot system code via Flash. gpioMode Reg: 0x4852c ## Booting image at bfc20000 ... text base: 80001000 entry point: 80001000 Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80001000) ... ## Giving linux memsize in MB, 64 Starting kernel ... [ 0.000000] Linux version 5.10.161 (spider@mail) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20028-43d71ad93e) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Tue Jan 3 00:24:21 2023 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is TP-LINK RE350 v1 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] percpu: Embedded 15 pages/cpu s30224 r8192 d23024 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] Writing ErrCtl register=0005b130 [ 0.000000] Readback ErrCtl register=0005b130 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 54444K/65536K available (6697K kernel code, 620K rwdata, 1356K rodata, 1236K init, 233K bss, 11092K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 880MHz [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000013] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns [ 0.015848] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns [ 0.033803] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.106126] pid_max: default: 32768 minimum: 301 [ 0.115441] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.129846] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.148211] rcu: Hierarchical SRCU implementation. [ 0.158032] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.173623] smp: Bringing up secondary CPUs ... [ 0.183381] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.183392] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.183404] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.183482] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.243417] Synchronize counters for CPU 1: done. [ 0.305259] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.305269] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.305278] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.305324] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.364384] Synchronize counters for CPU 2: done. [ 0.424757] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.424767] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.424775] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.424826] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.483957] Synchronize counters for CPU 3: done. [ 0.543569] smp: Brought up 1 node, 4 CPUs [ 0.555880] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.575400] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.589228] pinctrl core: initialized pinctrl subsystem [ 0.601988] NET: Registered protocol family 16 [ 0.613488] cpuidle: using governor teo [ 0.666803] clocksource: Switched to clocksource GIC [ 0.678604] NET: Registered protocol family 2 [ 0.687638] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.702769] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.719370] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.734486] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.748478] TCP: Hash tables configured (established 1024 bind 1024) [ 0.761235] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.774135] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.788251] NET: Registered protocol family 1 [ 0.796822] PCI: CLS 0 bytes, default 32 [ 0.807298] workingset: timestamp_bits=14 max_order=14 bucket_order=0 [ 0.824288] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.835775] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.858109] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.869508] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.880931] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.893054] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.907466] printk: console [ttyS0] disabled [ 0.915923] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 0.933930] printk: console [ttyS0] enabled [ 0.933930] printk: console [ttyS0] enabled [ 0.950428] printk: bootconsole [early0] disabled [ 0.950428] printk: bootconsole [early0] disabled [ 0.971970] spi-mt7621 1e000b00.spi: sys_freq: 220000000 [ 0.984534] spi-nor spi0.0: s25fl064k (8192 Kbytes) [ 0.994364] 4 fixed-partitions partitions found on MTD device spi0.0 [ 1.007080] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 1.021668] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 1.037044] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 1.051647] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 1.067454] Creating 4 MTD partitions on "spi0.0": [ 1.077042] 0x000000000000-0x000000020000 : "u-boot" [ 1.088046] 0x000000020000-0x000000600000 : "firmware" [ 1.099964] 2 tplink-fw partitions found on MTD device firmware [ 1.111827] Creating 2 MTD partitions on "firmware": [ 1.121768] 0x000000000000-0x00000029e12f : "kernel" [ 1.131665] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only [ 1.149255] 0x00000029e12f-0x0000005e0000 : "rootfs" [ 1.159188] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only [ 1.178478] mtd: setting mtd3 (rootfs) as root device [ 1.188827] 1 squashfs-split partitions found on MTD device rootfs [ 1.201230] 0x000000580000-0x0000005e0000 : "rootfs_data" [ 1.213266] 0x000000600000-0x000000650000 : "config" [ 1.224437] 0x0000007f0000-0x000000800000 : "radio" [ 1.277904] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 1.294023] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21 [ 1.311798] i2c /dev entries driver [ 1.321262] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: [ 1.334716] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff] [ 1.352294] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000 [ 1.368628] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 [ 1.385040] mt7621-pci 1e140000.pcie: Parsing DT failed [ 1.397602] NET: Registered protocol family 10 [ 1.408338] Segment Routing with IPv6 [ 1.415723] NET: Registered protocol family 17 [ 1.425165] 8021q: 802.1Q VLAN Support v1.8 [ 1.437509] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 1.466335] mt7530 mdio-bus:1f lan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=26) [ 1.490826] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode [ 1.507713] DSA: tree 0 setup [ 1.513966] rt2880-pinmux pinctrl: pcie is already enabled [ 1.525003] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: [ 1.538381] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff] [ 1.555926] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000 [ 1.572233] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 [ 1.588636] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) [ 1.603748] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) [ 1.618761] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22 [ 1.733422] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz [ 1.744551] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz [ 1.855877] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 1.869758] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 1.879480] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 1.889201] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 1.907930] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 1.920620] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 1.934331] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 1.948036] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.958976] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] (bus address [0x00000000-0x0fffffff]) [ 1.979295] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 1.991294] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 2.003784] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff] [ 2.016338] pci 0000:00:00.0: supports D1 [ 2.024328] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 2.036485] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 2.048538] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 2.061039] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff] [ 2.073589] pci 0000:00:01.0: supports D1 [ 2.081584] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 2.095062] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 [ 2.107130] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.121184] pci 0000:01:00.0: reg 0x10: [mem size 0x00100000] [ 2.132769] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.146505] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 2.156969] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 2.169130] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 2.182660] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.196133] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000 [ 2.208169] pci 0000:02:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.222231] pci 0000:02:00.0: reg 0x10: [mem size 0x00100000 64bit] [ 2.234768] pci 0000:02:00.0: reg 0x30: initial BAR value 0x00000000 invalid [ 2.248815] pci 0000:02:00.0: reg 0x30: [mem size 0x00010000 pref] [ 2.261241] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.275138] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 2.285594] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 2.297749] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff] [ 2.311278] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff pref] [ 2.325670] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 2.338903] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 2.352084] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 2.365961] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 2.379143] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 2.393020] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 2.406544] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff] [ 2.420085] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref] [ 2.434480] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff] [ 2.448012] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff] [ 2.461544] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] [ 2.475068] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff] [ 2.488614] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] [ 2.502146] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.512039] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] [ 2.525567] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 2.539110] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit] [ 2.553696] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref] [ 2.568086] pci 0000:00:01.0: PCI bridge to [bus 02] [ 2.577983] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff] [ 2.591505] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff] [ 2.605032] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff pref] [ 2.636975] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 2.655337] Freeing unused kernel memory: 1236K [ 2.664427] This architecture does not have kernel memory protection. [ 2.677282] Run /sbin/init as init process [ 2.686006] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx [ 3.706195] init: Console is alive [ 3.713453] init: - watchdog - [ 4.518604] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.651714] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.677201] init: - preinit - [ 6.028598] random: jshn: uninitialized urandom read (4 bytes read) [ 6.115263] random: jshn: uninitialized urandom read (4 bytes read) [ 6.169059] random: jshn: uninitialized urandom read (4 bytes read) [ 6.477797] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 6.493927] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 6.497281] mt7530 mdio-bus:1f lan: configuring for phy/gmii link mode [ 6.524112] 8021q: adding VLAN 0 to HW filter on device lan [ 6.538388] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 9.337583] mt7530 mdio-bus:1f lan: Link is Up - 1Gbps/Full - flow control off [ 9.352030] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready [ 10.947527] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 10.978271] urandom-seed: Seed file not found (/etc/urandom.seed) [ 11.119683] mt7530 mdio-bus:1f lan: Link is Down [ 11.139383] procd: - early - [ 11.145356] procd: - watchdog - [ 11.816987] procd: - watchdog - [ 11.824029] procd: - ubus - [ 11.940926] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.955457] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.968696] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.984013] procd: - init - Please press Enter to activate this console. [ 12.787301] kmodloader: loading kernel modules from /etc/modules.d/* [ 12.985404] Loading modules backported from Linux version v5.15.81-0-ge4a7232c917c [ 13.000559] Backport generated by backports.git v5.15.81-1-0-ge1867d55 [ 13.063488] urngd: v1.0.2 started. [ 13.209654] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=22 [ 13.220524] pci 0000:00:00.0: enabling device (0006 -> 0007) [ 13.231814] mt7603e 0000:01:00.0: enabling device (0000 -> 0002) [ 13.243953] mt7603e 0000:01:00.0: ASIC revision: 76030010 [ 13.248394] random: crng init done [ 13.261497] random: 26 urandom warning(s) missed due to ratelimiting [ 14.288221] mt7603e 0000:01:00.0: Firmware Version: ap_pcie [ 14.299386] mt7603e 0000:01:00.0: Build Time: 20160107100755 [ 14.346782] mt7603e 0000:01:00.0: firmware init done [ 14.531485] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=23 [ 14.542323] pci 0000:00:01.0: enabling device (0006 -> 0007) [ 14.553618] mt76x2e 0000:02:00.0: enabling device (0000 -> 0002) [ 14.565792] mt76x2e 0000:02:00.0: ASIC revision: 76120044 [ 15.457290] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a [ 15.473687] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00 [ 15.484741] mt76x2e 0000:02:00.0: Build: 1 [ 15.492917] mt76x2e 0000:02:00.0: Build Time: 201607111443____ [ 15.526848] mt76x2e 0000:02:00.0: Firmware running! [ 15.544084] kmodloader: done loading kernel modules from /etc/modules.d/* [ 27.352894] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 27.366717] jffs2_build_filesystem(): unlocking the mtd device... [ 27.366845] done. [ 27.383108] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 27.715087] mtk_soc_eth 1e100000.ethernet eth0: Link is Down [ 27.754115] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 27.770514] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 27.788279] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.802183] mt7530 mdio-bus:1f lan: configuring for phy/gmii link mode [ 27.815764] 8021q: adding VLAN 0 to HW filter on device lan [ 27.831025] br-lan: port 1(lan) entered blocking state [ 27.841402] br-lan: port 1(lan) entered disabled state [ 27.852719] device lan entered promiscuous mode [ 27.862024] device eth0 entered promiscuous mode [ 28.897399] done. [ 28.901271] jffs2: notice: (1693) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 29.072773] overlayfs: upper fs does not support tmpfile. [ 30.205235] mt7530 mdio-bus:1f lan: Link is Up - 1Gbps/Full - flow control off [ 30.219857] br-lan: port 1(lan) entered blocking state [ 30.230390] br-lan: port 1(lan) entered forwarding state [ 30.242194] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

Space for additional notes, links to forum threads or other resources.

...

Add tags below, then remove this fixme.

How to add tags

ramips, mt7621, 8Flash, 64RAM, 1port, gigabitethernet, 802.11abgn simultan, 802.11ac, MIPS, Wall plug, Mains powered

ramips mt7621 8Flash 64RAM 1port gigabitethernet 802.11abgn simultan 802.11ac mips Wall plug Mains powered

TP-Link RE350 v1

Getting started with a new Device Page

Keep the articles modular

Supported Versions

Hardware Highlights

Installation

Flash Layout

OEM easy installation

OEM installation using the TFTP method

Specific values needed for tftp

Upgrading OpenWrt

LuCI Web Upgrade Process

Terminal Upgrade Process

sysupgrade

mtd

Debricking

Failsafe mode

Basic configuration

Specific Configuration

Network interfaces

Switch Ports (for VLANs)

Buttons

Hardware

Info

Photos

Opening the case

Serial

JTAG

Bootloader mods

Hardware mods

Bootlogs

OEM bootlog

OpenWrt bootlog

Notes

Tags