User Tools

Site Tools


toh:tecom:gw6000

Tecom GW6000

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version (18.06 or later) onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device will end after 2019.
19.07 will be the last official build for 4/32 devices. After 19.07, no further OpenWrt images will be built for 4/32 devices. See OpenWrt on 4/32 devices what you can do now.

Supported Versions

Hardware Highlights

Installation

CFE

CFE> flashimage openwrt-96348GW-bc221-squashfs-cfe.bin

Update OpenWrt

root@OpenWrt:~# cd /tmp root@OpenWrt:~# wget http://downloads.openwrt.org/.../openwrt-96348GW-bc221-squashfs-cfe.bin root@OpenWrt:~# sysupgrade openwrt-96348GW-bc221-squashfs-cfe.bin

Serial Console

The board contains a 4 pin header next to the right side of the main CPU. Settings are 115200 8N1, no flow control.

     (Back)
  _____________
 /             \  [5V]
 |             |  [RX]
 | BCM6348KPBG |  [TX]
 |             |  [GD]
 |             |
 \_____________/
     (Front)

Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/tecom/gw6000.txt · Last modified: 2019/02/12 19:21 by tmomas