V11ST-FE

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version (18.06 or later) onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device will end after 2019.
19.07 will be the last official build for 4/32 devices. After 19.07, no further OpenWrt images will be built for 4/32 devices. See OpenWrt on 4/32 devices what you can do now.

Ralink's V11ST-FE is a RT2880F evaluation board including a 5-port IC+ IP175C Ethernet switch and on-board Ralink RT2820 radio. It exposes a JTAG and an UART header between the CPU and the Radio chips.

Brand	Model	Version	Current Release	OEM Info	Forum Topic	Technical Data
Evaluation boards / unbranded boards	Ralink V11ST-FE		19.07.2			View/Edit data

Model	Version	SoC	CPU MHz	Flash MB	RAM MB	WLAN Hardware	WLAN2.4	WLAN5.0	100M ports	Gbit ports	Modem	USB
Ralink V11ST-FE		Ralink RT2880F	266	4	32	1x mini-PCI	-	-	4		-	-

Model	Version	Current Release	Firmware OpenWrt Install	Firmware OpenWrt Upgrade	Firmware OEM Stock
Ralink V11ST-FE		19.07.2		https://downloads.openwrt.org/releases/19.07.2/targets/ramips/rt288x/openwrt-19.07.2-ramips-rt288x-v11st-fe-squashfs-sysupgrade.bin

→ Install OpenWrt (generic explanation)

Please add the installation procedure here.

Serial console is on the 2×5 pin header with the following pinout:

RT2880                          Wi-Fi
        [TX] [VCC]
        []   []
        []   []
        [RX] [GND]

Serials console baudrate is : 57600,8n1

How to add tags

4Flash, 32RAM, RT2880

4Flash 32RAM rt2880

V11ST-FE

Supported Versions

Hardware Highlights

Installation

Hardware

Serial port

Tags