Techdata: QNAP QHora-301W

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi Router
Brand:
QNAP
Model:
QHora-301W
FCCID:
https://fccid.io/NCC/CCAH20LP5350T7
Availability:
Available 2023
Where available:
Amazon
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=bd17683261e1dde1fdd4223745852de1ce8cfc89
Supported Current Rel:
23.05.2
Gluon support:
No
Subtarget:
ipq807x
Package architecture:
aarch64_cortex-a53
Bootloader:
U-Boot
CPU:
Qualcomm IPQ8072A
CPU Cores:
4
CPU MHz:
2200
Flash MB:
¿
RAM MB:
1024
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
4
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
2
SFP ports:
-
SFP+ ports:
-
Switch:
QCA8075 + AQR113C
VLAN:
Yes
Modem:
-
Comments network ports:
QCA8075 4 x RJ-45 1 Gigabit (10/100/1000 Mbps) Ethernet (WAN/LAN) + AQR113C 2 x RJ-45 10 Gigabit (10G/5G/2.5G/1G/100Mbps) Ethernet (WAN/LAN)
WLAN Hardware:
Qualcomm QCN5024, Qualcomm QCN5054
WLAN 2.4GHz:
b/g/n/ax
WLAN 5.0GHz:
a/n/ac/ax
WLAN Comments:
8 internal 5dBi Antennas / Dual-Band 5G (2475Mbps): 4x4 (80MHz), 2x2 (160MHz) 2.4G (1182Mbps): 4x4 (40MHz)
Bluetooth:
-
miniPCI ports:
-
USB ports:
2x 3.0
SATA ports:
¿
Comments USB SATA ports:
2x USB 3.2 Gen 1 Ports
Video ports:
-
Audio ports:
¿
Phone ports:
-
Serial:
Yes
Serial connection parameters:
¿
Serial connection voltage:
¿
JTAG:
¿
LED count:
9
Button count:
1
GPIOs:
-
Power Supply:
12 VDC
Outdoor:
no
OpenVPN performance:
¿
Wireguard performance:
¿
Device Page:
301w
OWrt Forum Topic URL:
https://forum.openwrt.org/t/adding-openwrt-support-for-qnap-qhora-301w/96934
WikiDevi URL:
http://¿
OEM Device Homepage URL:
https://www.qnap.com/en/product/qhora-301w
Firmware OEM Stock URL:
https://www.qnap.com/en/download?model=qhora-301w&category=firmware
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/23.05.2/targets/ipq807x/generic/openwrt-23.05.2-ipq807x-generic-qnap_301w-initramfs-uImage.itb
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/23.05.2/targets/ipq807x/generic/openwrt-23.05.2-ipq807x-generic-qnap_301w-initramfs-uImage.itb
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-qnap_301w-initramfs-uImage.itb
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/qualcommax/ipq807x/openwrt-qualcommax-ipq807x-qnap_301w-squashfs-sysupgrade.bin
Installation method(s):
Serial
Recovery method(s):
Serial
Picture:
picture: genericrouter1.png
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/02/27 12:32
  • by sppmaster