User Tools

Site Tools


toh:hwdata:ocedo:ocedo_raccoon

Techdata: Ocedo Raccoon

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

Dataentry

Device Type:
WiFi AP
Brand:
Ocedo
Model:
Raccoon
FCCID:
http://fcc.io/2AAUY-RACCOON
Availability:
Discontinued
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=647614803473757e3b2d93d46938afccd61a5a5d
Supported Current Rel:
snapshot
Target:
ath79
Subtarget:
generic
Package architecture:
mips_24kc
Bootloader:
U-Boot
CPU:
Atheros AR9344
CPU Cores:
1
CPU MHz:
¿
Flash MB:
16
RAM MB:
128
Ethernet 100M ports:
-
Ethernet Gbit ports:
1
Switch:
¿
VLAN:
¿
Modem:
-
WLAN Hardware:
Atheros AR9344, Atheros AR9382
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n
WLAN driver:
ath9k
Detachable Antennas:
-
Bluetooth:
-
USB ports:
-
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
JTAG:
¿
LED count:
4
Button count:
1
GPIOs:
-
Power Supply:
12 VDC, 2.0 A
Firmware OpenWrt snapshot Install URL:
http://downloads.openwrt.org/snapshots/targets/ath79/generic/openwrt-ath79-generic-ocedo_raccoon-initramfs-kernel.bin
Firmware OpenWrt snapshot Upgrade URL:
http://downloads.openwrt.org/snapshots/targets/ath79/generic/openwrt-ath79-generic-ocedo_raccoon-squashfs-sysupgrade.bin
Installation method(s):
U-Boot TFTP recovery, see git-commit
Recovery method(s):
U-Boot TFTP recovery
Picture:
picture: genericrouter1.png
Comments:
The U-Boot won't boot with the serial attached. Boot the device without serial attached and attach it after 3 seconds.

Conventions for dataentry values

General nomenclature

Details

Conventions per characteristic

Details

toh/hwdata/ocedo/ocedo_raccoon.txt · Last modified: 2019/07/10 17:00 by tmomas