Techdata: FriendlyElec NanoPC-T6 non-LTE

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Single Board Computer
Brand:
FriendlyARM
Model:
NanoPC-T6
Version:
non-LTS
Availability:
Available 2023
Where available:
https://www.friendlyelec.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=9482341a475245cc38244cf5fbe06ca30432315f
Supported Current Rel:
snapshot
Image too big:
-
Gluon support:
unknown
Target:
rockchip
Subtarget:
armv8
Package architecture:
aarch64_generic
Bootloader:
U-Boot
CPU:
Rockchip RK3588
CPU Cores:
8
CPU MHz:
2400
Flash MB:
more than 8GB, eMMC, microSD
RAM MB:
more than 4GB
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
-
Ethernet 2.5Gbit ports:
2
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
VLAN:
Yes
Modem:
LTE
WLAN Comments:
Allow to extend SBC by M.2 wifi/bluetooth module (E-key connector with PCIe 2.1 x1)
Bluetooth:
other
miniPCI ports:
1x M.2 Key M (PCIe 3.0 x4) for NVMe SSDs up to 2,500 MB/s, 1x M.2 Key E (PCIe 2.1 x1) and USB2.0 Host
USB ports:
1x 3.0
SATA ports:
-
Comments USB SATA ports:
NVMe can be used instead
Video ports:
other
Audio ports:
Headphone jack
Phone ports:
-
Comments AV ports:
Video in: 1xHDMI 2.0 4Kp60, 2x 4-lane MIPI-CSI (MIPI 1.2) Video out: 1xHDMI 2.1 8K@60Hz, 1xHDMI 2.0 4Kp60, 2x 4-lane MIPI-DSI (MIPI 2.0) Audio: 3.5mm jack (stereo), 2.0mm PH-2A connector for analog microphone
Serial:
Yes
JTAG:
No
LED count:
1
Button count:
1
GPIOs:
more than 20
Power Supply:
5.5*2.1mm DC Jack & 2-Pin 3.5mm pitch connector, 12VDC input
Outdoor:
No
OWrt Forum Topic URL:
https://forum.openwrt.org/t/nanopc-t6-is-a-ultimate-device-than-r4s-r5s-r6s/178877
OEM Device Homepage URL:
https://wiki.friendlyelec.com/wiki/index.php/NanoPC-T6
Firmware OEM Stock URL:
https://download.friendlyelec.com/NanoPC-T6
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/rockchip/armv8/openwrt-rockchip-armv8-friendlyarm_nanopc-t6-squashfs-sysupgrade.img.gz
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/rockchip/armv8/openwrt-rockchip-armv8-friendlyarm_nanopc-t6-squashfs-sysupgrade.img.gz
Installation method(s):
SD card
Picture:
picture: friendlyarm_nanopc-t6_layout-l.jpg
Comments:
The OpenWRT project transforms compatible hardware into a powerful, customizable router, offering extensive features like Wi-Fi enhancements and support for NVMe M.2 disks. Its flexibility makes it ideal for use as a network cache, optimizing performance for high-demand environments. Additionally, OpenWRT can serve as a robust VPN server, IoT hub, or media server, enabling seamless control and extension of home or enterprise networks. Non-LTS image works also with T6-LTS out of the box. Additional development is needed to replace DTS files and provide the proper support for LTS version.
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/12/07 01:59
  • by raylynnknight