User Tools

Site Tools


toh:hwdata:buffalo:buffalo_wzr-agl300nh_v01

Techdata: Buffalo WZR-AGL300NH V01

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version (18.06 or later) onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device will end after 2019.
19.07 will be the last official build for 4/32 devices. After 19.07, no further OpenWrt images will be built for 4/32 devices. See OpenWrt on 4/32 devices what you can do now.

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

Dataentry

Device Type:
WiFi Router
Brand:
Buffalo
Model:
WZR-AGL300NH
Version:
V01
Availability:
Discontinued
Supported Since Commit:
https://git.lede-project.org/?p=source.git;a=commit;h=6351d88e29a6e0ffc96d11d33d22eafdbfd1a41b
Supported Since Rel:
15.05.1
Supported Current Rel:
18.06.5
Gluon support:
Yes
Target:
ramips
Subtarget:
rt288x
Package architecture:
mipsel_mips32r2
Bootloader:
U-Boot
CPU:
Ralink RT2880F
CPU Cores:
1
CPU MHz:
266
Flash MB:
4
RAM MB:
32
Ethernet 100M ports:
-
Ethernet Gbit ports:
5
Switch:
¿
VLAN:
No
Modem:
-
WLAN Hardware:
Ralink RT2880F, Ralink RT2561T
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
WLAN driver:
rt2800pci
Detachable Antennas:
-
Bluetooth:
-
USB ports:
-
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
¿
JTAG:
¿
LED count:
¿
Button count:
¿
GPIOs:
-
Power Supply:
¿
Firmware OpenWrt Upgrade URL:
http://downloads.openwrt.org/releases/18.06.5/targets/ramips/rt288x/openwrt-18.06.5-ramips-rt288x-wzr-agl300nh-squashfs-sysupgrade.bin
Firmware OpenWrt snapshot Upgrade URL:
http://downloads.openwrt.org/snapshots/targets/ramips/rt288x/openwrt-ramips-rt288x-buffalo_wzr-agl300nh-squashfs-sysupgrade.bin
Installation method(s):
unknown
Recovery method(s):
unknown
Picture:
picture: genericrouter1.png

Conventions for dataentry values

General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/hwdata/buffalo/buffalo_wzr-agl300nh_v01.txt · Last modified: 2019/11/13 21:50 by tmomas