Edimax BR-6475nD

The FCC test report lists the following as identical models

Edimax BR-6475nD, GR-475nD, EW-7475PDD
Intellinet 525039
SMC SMCE21011V2

Brand	Model	Version	Current Release	OEM Info	Forum Topic	Technical Data
Edimax	BR-6475nD	A	23.05.0	http://www.edimax.com/edimax/merchandise/merchandise_detail/data/edimax/global/wireless_routers_n300_dual_band/br-6475nd	https://forum.openwrt.org/viewtopic.php?id=48072	View/Edit data

Model	Version	SoC	CPU MHz	Flash MB	RAM MB	WLAN Hardware	WLAN2.4	WLAN5.0	100M ports	Gbit ports	Modem	USB
BR-6475nD	A	Ralink RT3662F	500	8	64	Ralink RT3092, Ralink RT3662F	b/g/n	a/n	-		-	Mod

Model	Version	Current Release	Firmware OpenWrt Install	Firmware OpenWrt Upgrade	Firmware OEM Stock
BR-6475nD	A	23.05.0		https://downloads.openwrt.org/releases/23.05.0/targets/ramips/rt3883/openwrt-23.05.0-ramips-rt3883-edimax_br-6475nd-squashfs-sysupgrade.bin	http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/wireless_routers/wireless_routers_n300_dual_band/br-6475nd

→ Install OpenWrt (generic explanation)

Please add the installation procedure here.

The serial port is under the PoE injector board. Pinout: [ TX GND RX ][ VCC ]

FCC documents show two USB ports installed, but the shipping model does not appear to have them.

There are solder pads for seven USB ports. Solder pads for two triple stacked USB ports are located on the front of the board, right next to the leds. A single usb solder pad is located beside the power socket, this location is obstructed by the antenna fitting.

Linux GPL sources are available at http://www.edimax.com/images/Image/OpenSourceCode/Wireless/Router/BR-6475nD/Edimax_RT3662_6X75nD_GPL_20110920.zip

Build environment is Fedora 7 i386.

How to add tags

ramips, rt3662, 8Flash, 64RAM

ramips rt3662 8Flash 64RAM

Edimax BR-6475nD

Supported Versions

Hardware Highlights

Installation

Hardware

Serial port

USB

Source code

Tags