Dovado TINY AC
Supported Versions
Hardware Highlights
Installation
Please add the installation procedure here.
Debricking
Failsafe mode
Basic configuration
→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.
Specific Configuration
Network interfaces
The default network configuration is:
| Interface Name | Description | Default configuration |
|---|---|---|
| br-lan | LAN & WiFi | 192.168.1.1/24 |
| vlan0 (eth0.0) | LAN ports | None |
| vlan1 (eth0.1) | WAN port | DHCP |
| wlan0 | WiFi | Disabled |
Buttons
→ hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.
The Dovado TINY AC has the following buttons:
| BUTTON | Event |
|---|---|
| Reset | reset |
Hardware
Info
Photos
Opening the case
Note: This will void your warranty!
Remove 4 phillips screws underneath the router, and lift upper cover.
Main PCB:
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
| Serial connection parameters for Dovado TINY AC | 57600, 8N1 |
|---|