D-Link AQUILA PRO AI M30 A1

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.

Keep the articles modular

Please include only model specific information, omit bla,bla and put everything generic into separate articles
If you have no time to write certain stuff, link to docs
base-system should lead the way, do not explain this again
DO NOT provide a complete howto here! Instead groom the general documentation.

The tables below are automatically generated, once the correct filters for Brand and Model are set.
If the tables below show information for D-Link AQUILA PRO AI M30 A1, everything is OK and you can delete this text and the <WRAP> that encloses it.
If the tables below contain “Nothing found”, it means that either
1. the dataentry page for D-Link AQUILA PRO AI M30 A1 is missing. Please create a new dataentry page first, then reload this page. The tables should then contain $something. If they do, delete this text and the <WRAP> that encloses it.
2. filters are not set correctly. Most common reason for “Nothing found”: The dataentry does not contain a Version, but we are filtering here for version → Please edit this section and adjust the filters with the proper Brand, Model and Version. In case the dataentry does not contain a version, delete the line filter : Versions~. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the <WRAP> that encloses it.
If the tables still contain “Nothing found”: Don't panic, calm down, take a deep breath and contact a wiki admin (tmomas) for help.

None at this time.

→ Install OpenWrt (generic explanation)

Please add the installation procedure here.

Find out flash layout, then add the flash layout table here (copy, paste, modify the example).

Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.

Flashing OpenWrt via OEM web interface is not supported. But there is a recovery web interface which can be used to flash the OpenWrt recovery image:

The recovery web interface always flashes to the currently active partition.
If OpenWrt is flashed to the second partition, it will not boot.
Ensure that you have an OEM image available (encrypted and decrypted version).
Set your IP address to 192.168.200.10, subnet mask 255.255.255.0
Press the reset button while powering on the device
Keep the reset button pressed until the LED blinks red
Open a Chromium based and go to http://192.168.200.1/ (recovery web interface)
Download openwrt-mediatek-filogic-dlink_aquila-pro-ai-m30-a1-squashfs-recovery.bin
The recovery web interface always reports successful flashing, even if it fails
After flashing, the recovery web interface will try to forward the browser to 192.168.0.1 (can be ignored)
If OpenWrt was flashed to the first partition, OpenWrt will boot (The status LED will start blinking white and stay white in the end). In this case you're done and can use OpenWrt.
If OpenWrt was flashed to the second partition, OpenWrt won't boot (The status LED will stay red forever). In this case, the following steps are required:

Recovering when OEM firmware < 1.10.02 was installed previously

Start the web recovery interface again and flash the decrypted OEM image. This will be flashed to the second partition as well. The OEM firmware web interface is afterwards accessible via http://192.168.200.1/.
Now flash the encrypted OEM image via OEM firmware web interface. In this case, the new firmware is flashed to the first partition. After flashing and the following reboot, the OEM firmware web interface should still be accessible via http://192.168.200.1/.
Start the web recovery interface again and flash the OpenWrt recovery image. Now it will be flashed to the first partition, OpenWrt will boot correctly afterwards and is accessible via 192.168.1.1.

Recovering when OEM firmware >= 1.10.02 was installed previously

→ generic.flashing.tftp

Specific values needed for tftp

Enter values for “FILL-IN” below

Bootloader tftp server IPv4 address	FILL-IN
Bootloader MAC address (special)	FILL-IN
Firmware tftp image	Latest OpenWrt release (`NOTE:` Name must contain “tftp”)
TFTP transfer window	FILL-IN seconds
TFTP window start	approximately FILL-IN seconds after power on
TFTP client required IP address	FILL-IN

→ See generic.sysupgrade

→ generic.debrick

→ failsafe_and_factory_reset

→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Please fill in real values for this device, then remove the EXAMPLEs

The default network configuration is:

Interface Name	Description	Default configuration
br-lan	EXAMPLE LAN & WiFi	EXAMPLE 192.168.1.1/24
vlan0 (eth0.0)	EXAMPLE LAN ports (1 to 4)	EXAMPLE None
vlan1 (eth0.1)	EXAMPLE WAN port	EXAMPLE DHCP
wl0	EXAMPLE WiFi	EXAMPLE Disabled

Please fill in real values for this device, then remove the EXAMPLEs

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port	Switch port
Internet (WAN)	EXAMPLE 4
LAN 1	EXAMPLE 3
LAN 2	EXAMPLE 2
LAN 3	EXAMPLE 1
LAN 4	EXAMPLE 0

→ hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

The D-Link AQUILA PRO AI M30 has the following buttons:

BUTTON	Event
Reset	reset
WPS	wps

This table is automatically generated, once the correct filters for Brand and Model are set.
If you see “Nothing.” instead of a table, please edit this section and adjust the filters with the proper Brand and Model. Just try, it's easy.
If you still don't see a table here, or a table filled with '¿': Is there already a Techdata page available for D-Link AQUILA PRO AI M30 A1? If not: Create one.
If you see a table with the desired device data, everything is OK and you can delete this text and the <WRAP> that encloses it.
If it still doesn't work: Don't panic, calm down, take a deep breath and contact a wiki admin (tmomas) for help.

---- datatemplatelist dttpllist ---- template: meta:template_datatemplatelist cols : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Bootloader, CPU, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_ filter : Brand=D-Link filter : Model=AQUILA PRO AI M30 filter : Versions=A1

Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Backside label:
Insert photo of backside label

Note: This will void your warranty!

There are four screws at the bottom: 2 under the rubber feets, 2 under the label. After removing the screws, the white plastic part can be shifted out of the blue part. Be careful because the antennas are mounted on the side and the top of the white part.

Main PCB:
Insert photo of PCB

→ port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

The serial interface can be connected to the 4 pin holes on the side of the board. Pins (from front to rear):

3.3V
RX
TX
GND

Serial connection parameters for D-Link AQUILA PRO AI M30 A1	115200, 8N1, 3.3V

→ port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

→ bootloader

None so far.

F0: 102B 0000 FA: 1040 0000 FA: 1040 0000 [0200] F9: 0000 0000 V0: 0000 0000 [0001] 00: 0000 0000 BP: 2400 0041 [0000] G0: 1190 0000 EC: 0000 0000 [1000] T0: 0000 025A [010F] Jump to BL NOTICE: BL2: v2.7(release):25a94a7 NOTICE: BL2: Built : 11:34:45, Sep 19 2022 NOTICE: WDT: disabled NOTICE: EMI: Using DDR3 settings dump toprgu registers data: 1001c000 | 00000000 0000ffe0 00000000 00000000 1001c010 | 00000fff 00000000 00f00000 00000000 1001c020 | 00000000 00000000 00000000 00000000 1001c030 | 003c0003 003c0003 00000000 00000000 1001c040 | 00000000 00000000 00000000 00000000 1001c050 | 00000000 00000000 00000000 00000000 1001c060 | 00000000 00000000 00000000 00000000 1001c070 | 00000000 00000000 00000000 00000000 1001c080 | 00000000 00000000 00000000 00000000 dump drm registers data: 1001d000 | 00000000 00000000 00000000 00000000 1001d010 | 00000000 00000000 00000000 00000000 1001d020 | 00000000 00000000 00000000 00000000 1001d030 | 00a083f1 000003ff 00100000 00000000 1001d040 | 00000000 00000000 00020303 000000ff 1001d050 | 00000000 00000000 00000000 00000000 1001d060 | 00000002 00000000 00000000 00000000 drm: 500 = 0x8 [DDR Reserve] ddr reserve mode not be enabled yet DDR RESERVE Success 0 [EMI] ComboMCP not ready, using default setting BYTE_swap:0 BYTE_swap:0 Window Sum 568, worse bit 2, min window 68 Window Sum 576, worse bit 8, min window 72 Window Sum 326, worse bit 3, min window 36 Window Sum 320, worse bit 9, min window 36 Window Sum 346, worse bit 2, min window 40 Window Sum 340, worse bit 9, min window 40 Window Sum 362, worse bit 3, min window 42 Window Sum 348, worse bit 9, min window 42 Window Sum 378, worse bit 3, min window 44 Window Sum 368, worse bit 9, min window 44 Window Sum 392, worse bit 2, min window 46 Window Sum 380, worse bit 9, min window 46 Window Sum 404, worse bit 6, min window 48 Window Sum 402, worse bit 9, min window 48 Window Sum 418, worse bit 2, min window 50 Window Sum 406, worse bit 15, min window 48 Window Sum 426, worse bit 6, min window 50 Window Sum 420, worse bit 14, min window 50 Window Sum 448, worse bit 3, min window 54 Window Sum 434, worse bit 15, min window 52 Window Sum 452, worse bit 2, min window 54 Window Sum 444, worse bit 9, min window 54 Window Sum 462, worse bit 4, min window 54 Window Sum 454, worse bit 8, min window 56 Window Sum 474, worse bit 6, min window 56 Window Sum 464, worse bit 9, min window 56 Window Sum 478, worse bit 3, min window 58 Window Sum 468, worse bit 14, min window 56 Window Sum 482, worse bit 4, min window 58 NOTICE: EMI: Detected DRAM size: 512MB NOTICE: EMI: complex R/W mem test passed NOTICE: CPU: MT7981 (1300MHz) NOTICE: SPI_NAND parses attributes from parameter page. NOTICE: SPI_NAND Detected ID 0xc2 NOTICE: Page size 2048, Block size 131072, size 134217728 NOTICE: Initializing NMBM ... NOTICE: Signature found at block 1023 [0x07fe0000] NOTICE: First info table with writecount 2 found in block 960 NOTICE: Second info table with writecount 2 found in block 963 NOTICE: NMBM has been successfully attached in read-only mode NOTICE: BL2: Booting BL31 NOTICE: BL31: v2.7(release):25a94a7 NOTICE: BL31: Built : 11:34:45, Sep 19 2022 NOTICE: Hello BL31!!! U-Boot 2022.07-rc3-g091472d6-dirty (Aug 04 2023 - 08:42:13 +0000) CPU: MediaTek MT7981 Model: mt7981-rfb DRAM: 512 MiB Core: 38 devices, 16 uclasses, devicetree: embed Initializing NMBM(mt7981_rfb) ... spi-nand: spi_nand spi_nand@0: Macronix SPI NAND was found. spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 Could not find a valid device for nmbm0 Signature found at block 1023 [0x07fe0000] First info table with writecount 2 found in block 960 Second info table with writecount 2 found in block 963 NMBM has been successfully attached Loading Environment from MTD... OK In: serial@11002000 Out: serial@11002000 Err: serial@11002000 Net: eth0: ethernet@15100000 Setting bus to 0 Error writing the chip: -121 Error writing the chip: -121 Error writing the chip: -121 gpio: pin 0 (gpio 0) value is 1 *** U-Boot Boot Menu *** 1. Startup system (Default) 2. Upgrade firmware 3. Upgrade ATF BL2 4. Upgrade ATF FIP 5. Http Upgrade 6. Upgrade single image 7. Load image 0. U-Boot console Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit aup_command::do multicast-upgrade checking aup_start start load_p_section Reading from 0x0 to 0x5ffabda8, size 0x10 ... OK load_section: start p mode Reading from 0x0 to 0x5ffabda8, size 0x14cb ... OK load_section: found csxf tag csxf->magic: 5343 csxf->checksum: c7e1 csxf->body_length: 000014ab csxf->body_encoding: 00 csxf->raw_length: 000014ab check p section: ok load P section success romid: (DLK6E6110001) sys info PV 01 model name: (M30) ecn no: (200909100001) beid rule: 190A beid mac: XX:XX:XX:XX:XX:CC default ip: 192:168:200:1 aup_start Using ethernet@15100000 device mcast upgrade timeout. ubi_boot_image:569 ubi ubi0: attaching mtd6 ubi0: scanning is finished ubi0: attached mtd6 (name "ubi", size 50 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 102/62, WL threshold: 4096, image sequence number: 1571737675 ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 19 Reading from volume 'kernel' to 0x46000000, size 0x0 ... OK ## Loading kernel from FIT Image at 46000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 mt7981-dlink Linux-5.4.171 Type: Kernel Image Compression: lzma compressed Data Start: 0x460000f0 Data Size: 3893088 Bytes = 3.7 MiB Architecture: AArch64 OS: Linux Load Address: 0x48080000 Entry Point: 0x48080000 Hash algo: crc32 Hash value: 0c040d6c Hash algo: sha1 Hash value: ad2657f24f37363728a56553bddf8ae51535d152 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 46000000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 mt7981-dlink device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x463b6984 Data Size: 18264 Bytes = 17.8 KiB Architecture: AArch64 Hash algo: crc32 Hash value: c051447f Hash algo: sha1 Hash value: ef5b1dc89fb45537f95f900729a8703407ec9b14 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x463b6984 Uncompressing Kernel Image Loading Device Tree to 000000005ebf3000, end 000000005ebfa757 ... OK fdt_chosen:308 (console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 bootpart=ubi0) Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.4.171 (oe-user@oe-host) (gcc version 10.2.0 (GCC)) #1 SMP Fri Feb 24 10:07:55 UTC 2023 [ 0.000000] OF: fdt: search "chosen", depth: 0, uname: [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: cpus [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: cpu@0 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: cpu@1 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: pwm@10048000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: thermal-zones [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: cpu-thermal [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: thermal@1100c800 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: adc@1100d000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: wed@15010000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: wdma@15104800 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: ap2woccif@151A5000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: wocpu0_ilm@151E0000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: wocpu_dlm@151E8000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: wocpu_boot@15194000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: reserved-memory [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: secmon@43000000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: wmcpu-reserved@47C80000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: wocpu0_emi@47D80000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: wocpu_data@47DC0000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: psci [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: oscillator@0 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: infracfg_ao@10001000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: infracfg@10001040 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: topckgen@1001B000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: apmixedsys@1001E000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: dummy_system_clk [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: dummy_gpt_clk [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: timer [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: watchdog@1001c000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: interrupt-controller@c000000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: trng@1020f000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: serial@11002000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: serial@11003000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: serial@11004000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: i2c@11007000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: wm8960@1a [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: pcie@11280000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: interrupt-controller [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: crypto@10320000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: pinctrl@11d00000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: i2c-pins-g0 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: pcm-pins-g0 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: pwm0-pin-g0 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: pwm1-pin-g0 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: pwm2-pin [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: spi0-pins [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: conf-pu [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: conf-pd [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: spi1-pins [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: uart1-pins-g1 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: uart2-pins-g1 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: mux [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: syscon@15000000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: reset-controller [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: ethernet@15100000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: mac@0 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: fixed-link [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: mac@1 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: mdio-bus [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: ethernet-phy@0 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: switch@0 [ 0.000000] OF: fdt: search "chosen", depth: 4, uname: ports [ 0.000000] OF: fdt: search "chosen", depth: 5, uname: port@0 [ 0.000000] OF: fdt: search "chosen", depth: 5, uname: port@1 [ 0.000000] OF: fdt: search "chosen", depth: 5, uname: port@2 [ 0.000000] OF: fdt: search "chosen", depth: 5, uname: port@3 [ 0.000000] OF: fdt: search "chosen", depth: 5, uname: port@6 [ 0.000000] OF: fdt: search "chosen", depth: 6, uname: fixed-link [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: hnat@15000000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: syscon@10060000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: syscon@10070000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: topmisc@11d10000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: snfi@11005000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: mmc@11230000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: wbsys@18000000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: wed_pcie@10003000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: spi@1100a000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: spi_nand@0 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: spi@1100b000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: proslic_spi@0 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: spi@11009000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: consys@10000000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: xhci@11200000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: usb-phy@11e10000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: usb-phy@11e10000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: usb-phy@11e10700 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: regulator-3p3v [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: clkitg [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: bring-up [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: efuse@11f20000 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: calib@274 [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: calib@8dc [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: audio-controller@11210000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: ice_debug [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: nmbm_spim_nand [ 0.000000] OF: fdt: search "chosen", depth: 2, uname: partitions [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@0 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@100000 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@180000 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@380000 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@580000 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@3780000 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@6980000 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@69c0000 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@6a40000 [ 0.000000] OF: fdt: search "chosen", depth: 3, uname: partition@6ac0000 [ 0.000000] OF: fdt: search "chosen", depth: 1, uname: chosen [ 0.000000] OF: fdt: Looking for initrd properties... [ 0.000000] OF: fdt: Command line is: console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 bootpart=ubi0 [ 0.000000] OF: fdt: dt_root_size_cells = 2 [ 0.000000] OF: fdt: dt_root_addr_cells = 2 [ 0.000000] OF: fdt: memory scan node memory, reg size 16, [ 0.000000] OF: fdt: - 40000000 , 20000000 [ 0.000000] Machine model: MediaTek MT7981 RFB [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] OF: fdt: Reserved memory: reserved region for node 'secmon@43000000': base 0x0000000043000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: reserved region for node 'wmcpu-reserved@47C80000': base 0x0000000047c80000, size 1 MiB [ 0.000000] OF: fdt: Reserved memory: reserved region for node 'wocpu0_emi@47D80000': base 0x0000000047d80000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: reserved region for node 'wocpu_data@47DC0000': base 0x0000000047dc0000, size 2 MiB [ 0.000000] OF: fdt: -> unflatten_device_tree() [ 0.000000] OF: fdt: Unflattening device tree: [ 0.000000] OF: fdt: magic: d00dfeed [ 0.000000] OF: fdt: size: 00005000 [ 0.000000] OF: fdt: version: 00000011 [ 0.000000] OF: fdt: size is 78652, allocating... [ 0.000000] OF: fdt: unflattening (____ptrval____)... [ 0.000000] OF: fdt: fixed up name for -> [ 0.000000] OF: fdt: fixed up name for cpus -> cpus [ 0.000000] OF: fdt: fixed up name for cpu@0 -> cpu [ 0.000000] OF: fdt: fixed up name for cpu@1 -> cpu [ 0.000000] OF: fdt: fixed up name for pwm@10048000 -> pwm [ 0.000000] OF: fdt: fixed up name for thermal-zones -> thermal-zones [ 0.000000] OF: fdt: fixed up name for cpu-thermal -> cpu-thermal [ 0.000000] OF: fdt: fixed up name for thermal@1100c800 -> thermal [ 0.000000] OF: fdt: fixed up name for adc@1100d000 -> adc [ 0.000000] OF: fdt: fixed up name for wed@15010000 -> wed [ 0.000000] OF: fdt: fixed up name for wdma@15104800 -> wdma [ 0.000000] OF: fdt: fixed up name for ap2woccif@151A5000 -> ap2woccif [ 0.000000] OF: fdt: fixed up name for wocpu0_ilm@151E0000 -> wocpu0_ilm [ 0.000000] OF: fdt: fixed up name for wocpu_dlm@151E8000 -> wocpu_dlm [ 0.000000] OF: fdt: fixed up name for wocpu_boot@15194000 -> wocpu_boot [ 0.000000] OF: fdt: fixed up name for reserved-memory -> reserved-memory [ 0.000000] OF: fdt: fixed up name for secmon@43000000 -> secmon [ 0.000000] OF: fdt: fixed up name for wmcpu-reserved@47C80000 -> wmcpu-reserved [ 0.000000] OF: fdt: fixed up name for wocpu0_emi@47D80000 -> wocpu0_emi [ 0.000000] OF: fdt: fixed up name for wocpu_data@47DC0000 -> wocpu_data [ 0.000000] OF: fdt: fixed up name for psci -> psci [ 0.000000] OF: fdt: fixed up name for oscillator@0 -> oscillator [ 0.000000] OF: fdt: fixed up name for infracfg_ao@10001000 -> infracfg_ao [ 0.000000] OF: fdt: fixed up name for infracfg@10001040 -> infracfg [ 0.000000] OF: fdt: fixed up name for topckgen@1001B000 -> topckgen [ 0.000000] OF: fdt: fixed up name for apmixedsys@1001E000 -> apmixedsys [ 0.000000] OF: fdt: fixed up name for dummy_system_clk -> dummy_system_clk [ 0.000000] OF: fdt: fixed up name for dummy_gpt_clk -> dummy_gpt_clk [ 0.000000] OF: fdt: fixed up name for timer -> timer [ 0.000000] OF: fdt: fixed up name for watchdog@1001c000 -> watchdog [ 0.000000] OF: fdt: fixed up name for interrupt-controller@c000000 -> interrupt-controller [ 0.000000] OF: fdt: fixed up name for trng@1020f000 -> trng [ 0.000000] OF: fdt: fixed up name for serial@11002000 -> serial [ 0.000000] OF: fdt: fixed up name for serial@11003000 -> serial [ 0.000000] OF: fdt: fixed up name for serial@11004000 -> serial [ 0.000000] OF: fdt: fixed up name for i2c@11007000 -> i2c [ 0.000000] OF: fdt: fixed up name for wm8960@1a -> wm8960 [ 0.000000] OF: fdt: fixed up name for pcie@11280000 -> pcie [ 0.000000] OF: fdt: fixed up name for interrupt-controller -> interrupt-controller [ 0.000000] OF: fdt: fixed up name for crypto@10320000 -> crypto [ 0.000000] OF: fdt: fixed up name for pinctrl@11d00000 -> pinctrl [ 0.000000] OF: fdt: fixed up name for i2c-pins-g0 -> i2c-pins-g0 [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for pcm-pins-g0 -> pcm-pins-g0 [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for pwm0-pin-g0 -> pwm0-pin-g0 [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for pwm1-pin-g0 -> pwm1-pin-g0 [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for pwm2-pin -> pwm2-pin [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for spi0-pins -> spi0-pins [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for conf-pu -> conf-pu [ 0.000000] OF: fdt: fixed up name for conf-pd -> conf-pd [ 0.000000] OF: fdt: fixed up name for spi1-pins -> spi1-pins [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for uart1-pins-g1 -> uart1-pins-g1 [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for uart2-pins-g1 -> uart2-pins-g1 [ 0.000000] OF: fdt: fixed up name for mux -> mux [ 0.000000] OF: fdt: fixed up name for syscon@15000000 -> syscon [ 0.000000] OF: fdt: fixed up name for reset-controller -> reset-controller [ 0.000000] OF: fdt: fixed up name for ethernet@15100000 -> ethernet [ 0.000000] OF: fdt: fixed up name for mac@0 -> mac [ 0.000000] OF: fdt: fixed up name for fixed-link -> fixed-link [ 0.000000] OF: fdt: fixed up name for mac@1 -> mac [ 0.000000] OF: fdt: fixed up name for mdio-bus -> mdio-bus [ 0.000000] OF: fdt: fixed up name for ethernet-phy@0 -> ethernet-phy [ 0.000000] OF: fdt: fixed up name for switch@0 -> switch [ 0.000000] OF: fdt: fixed up name for ports -> ports [ 0.000000] OF: fdt: fixed up name for port@0 -> port [ 0.000000] OF: fdt: fixed up name for port@1 -> port [ 0.000000] OF: fdt: fixed up name for port@2 -> port [ 0.000000] OF: fdt: fixed up name for port@3 -> port [ 0.000000] OF: fdt: fixed up name for port@6 -> port [ 0.000000] OF: fdt: fixed up name for fixed-link -> fixed-link [ 0.000000] OF: fdt: fixed up name for hnat@15000000 -> hnat [ 0.000000] OF: fdt: fixed up name for syscon@10060000 -> syscon [ 0.000000] OF: fdt: fixed up name for syscon@10070000 -> syscon [ 0.000000] OF: fdt: fixed up name for topmisc@11d10000 -> topmisc [ 0.000000] OF: fdt: fixed up name for snfi@11005000 -> snfi [ 0.000000] OF: fdt: fixed up name for mmc@11230000 -> mmc [ 0.000000] OF: fdt: fixed up name for wbsys@18000000 -> wbsys [ 0.000000] OF: fdt: fixed up name for wed_pcie@10003000 -> wed_pcie [ 0.000000] OF: fdt: fixed up name for spi@1100a000 -> spi [ 0.000000] OF: fdt: fixed up name for spi_nand@0 -> spi_nand [ 0.000000] OF: fdt: fixed up name for spi@1100b000 -> spi [ 0.000000] OF: fdt: fixed up name for proslic_spi@0 -> proslic_spi [ 0.000000] OF: fdt: fixed up name for spi@11009000 -> spi [ 0.000000] OF: fdt: fixed up name for consys@10000000 -> consys [ 0.000000] OF: fdt: fixed up name for xhci@11200000 -> xhci [ 0.000000] OF: fdt: fixed up name for usb-phy@11e10000 -> usb-phy [ 0.000000] OF: fdt: fixed up name for usb-phy@11e10000 -> usb-phy [ 0.000000] OF: fdt: fixed up name for usb-phy@11e10700 -> usb-phy [ 0.000000] OF: fdt: fixed up name for regulator-3p3v -> regulator-3p3v [ 0.000000] OF: fdt: fixed up name for clkitg -> clkitg [ 0.000000] OF: fdt: fixed up name for bring-up -> bring-up [ 0.000000] OF: fdt: fixed up name for efuse@11f20000 -> efuse [ 0.000000] OF: fdt: fixed up name for calib@274 -> calib [ 0.000000] OF: fdt: fixed up name for calib@8dc -> calib [ 0.000000] OF: fdt: fixed up name for audio-controller@11210000 -> audio-controller [ 0.000000] OF: fdt: fixed up name for ice_debug -> ice_debug [ 0.000000] OF: fdt: fixed up name for nmbm_spim_nand -> nmbm_spim_nand [ 0.000000] OF: fdt: fixed up name for partitions -> partitions [ 0.000000] OF: fdt: fixed up name for partition@0 -> partition [ 0.000000] OF: fdt: fixed up name for partition@100000 -> partition [ 0.000000] OF: fdt: fixed up name for partition@180000 -> partition [ 0.000000] OF: fdt: fixed up name for partition@380000 -> partition [ 0.000000] OF: fdt: fixed up name for partition@580000 -> partition [ 0.000000] OF: fdt: fixed up name for partition@3780000 -> partition [ 0.000000] OF: fdt: fixed up name for partition@6980000 -> partition [ 0.000000] OF: fdt: fixed up name for partition@69c0000 -> partition [ 0.000000] OF: fdt: fixed up name for partition@6a40000 -> partition [ 0.000000] OF: fdt: fixed up name for partition@6ac0000 -> partition [ 0.000000] OF: fdt: fixed up name for chosen -> chosen [ 0.000000] OF: fdt: fixed up name for memory -> memory [ 0.000000] OF: fdt: fixed up name for leds -> leds [ 0.000000] OF: fdt: fixed up name for power_green -> power_green [ 0.000000] OF: fdt: fixed up name for power_red -> power_red [ 0.000000] OF: fdt: fixed up name for wlan_2g_red -> wlan_2g_red [ 0.000000] OF: fdt: fixed up name for wlan_5g_red -> wlan_5g_red [ 0.000000] OF: fdt: fixed up name for gpio-keys -> gpio-keys [ 0.000000] OF: fdt: fixed up name for rst_btn -> rst_btn [ 0.000000] OF: fdt: fixed up name for wps_btn -> wps_btn [ 0.000000] OF: fdt: fixed up name for onoff_btn -> onoff_btn [ 0.000000] OF: fdt: <- unflatten_device_tree() [ 0.000000] On node 0 totalpages: 130128 [ 0.000000] DMA32 zone: 2048 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 130128 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 20 pages/cpu s43864 r8192 d29864 u81920 [ 0.000000] pcpu-alloc: s43864 r8192 d29864 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128080 [ 0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 bootpart=ubi0 [ 0.000000] start rootfs@ubi [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 490496K/520512K available (7998K kernel code, 566K rwdata, 2180K rodata, 448K init, 305K bss, 30016K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 640 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 [ 0.000000] random: get_random_bytes called from start_kernel+0x334/0x478 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000003] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.008182] Console: colour dummy device 80x25 [ 0.012666] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000) [ 0.022985] pid_max: default: 32768 minimum: 301 [ 0.027697] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.035047] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.043631] ASID allocator initialised with 65536 entries [ 0.049124] rcu: Hierarchical SRCU implementation. [ 0.054202] smp: Bringing up secondary CPUs ... [ 0.059029] Detected VIPT I-cache on CPU1 [ 0.059048] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 [ 0.059069] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.059128] smp: Brought up 1 node, 2 CPUs [ 0.080739] SMP: Total of 2 processors activated. [ 0.085464] CPU features: detected: 32-bit EL0 Support [ 0.090626] CPU features: detected: CRC32 instructions [ 0.095889] CPU: All CPU(s) started at EL2 [ 0.100010] alternatives: patching kernel code [ 0.104940] devtmpfs: initialized [ 0.110244] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.120060] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.126950] pinctrl core: initialized pinctrl subsystem [ 0.132707] NET: Registered protocol family 16 [ 0.137395] DMA: preallocated 256 KiB pool for atomic allocations [ 0.157595] cryptd: max_cpu_qlen set to 1000 [ 0.163401] iommu: Default domain type: Translated [ 0.168476] SCSI subsystem initialized [ 0.173003] libata version 3.00 loaded. [ 0.177110] usbcore: registered new interface driver usbfs [ 0.182665] usbcore: registered new interface driver hub [ 0.188031] usbcore: registered new device driver usb [ 0.194106] rbus 18000000.wbsys: PCI host bridge to bus 0000:00 [ 0.200069] pci_bus 0000:00: root bus resource [mem 0x18000000-0x18ffffff] [ 0.206980] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.212492] pci_bus 0000:00: scanning bus [ 0.216531] pci 0000:00:00.0: [14c3:7981] type 00 class 0x000280 [ 0.222579] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit] [ 0.229402] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f] [ 0.235701] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f] [ 0.242000] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f] [ 0.248298] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f] [ 0.255389] pci_bus 0000:00: fixups for bus [ 0.259596] pci_bus 0000:00: bus scan returning with max=00 [ 0.265497] clocksource: Switched to clocksource arch_sys_counter [ 0.277095] thermal_sys: Registered thermal governor 'fair_share' [ 0.277098] thermal_sys: Registered thermal governor 'bang_bang' [ 0.283247] thermal_sys: Registered thermal governor 'step_wise' [ 0.289285] thermal_sys: Registered thermal governor 'user_space' [ 0.295320] thermal_sys: Registered thermal governor 'power_allocator' [ 0.301662] NET: Registered protocol family 2 [ 0.312683] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.320609] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.329099] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.336909] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.344123] TCP: Hash tables configured (established 4096 bind 4096) [ 0.350570] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.357141] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.364219] NET: Registered protocol family 1 [ 0.368619] PCI: CLS 0 bytes, default 64 [ 0.373436] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.383504] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.389506] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.400856] fuse: init (API version 7.31) [ 0.417723] phy phy-usb-phy@11e10000.1: type_sw - reg 0x218, index 0 [ 0.434968] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.442443] printk: console [ttyS0] disabled [ 0.466928] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 12, base_baud = 2500000) is a ST16650V2 [ 0.476137] printk: console [ttyS0] enabled [ 0.476137] printk: console [ttyS0] enabled [ 0.484495] printk: bootconsole [uart8250] disabled [ 0.484495] printk: bootconsole [uart8250] disabled [ 0.494919] mtk_rng trng@1020f000: registered RNG driver [ 0.494937] random: fast init done [ 0.503700] random: crng init done [ 0.507306] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.515822] loop: module loaded [ 0.519116] mediatek,mt2701-ice_debug ice_debug: get dbg_sel clock fail: -2 [ 0.526081] mediatek,mt2701-ice_debug: probe of ice_debug failed with error -2 [ 0.534116] mt7981-pinctrl 11d00000.pinctrl: pin_config_set op failed for pin 19 [ 0.541515] mtk-spi 1100a000.spi: Error applying setting, reverse things back [ 0.549127] spi-nand spi0.0: Macronix SPI NAND was found. [ 0.554542] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.564132] libphy: Fixed MDIO Bus: probed [ 0.580022] libphy: mdio: probed [ 0.583682] mtk_soc_eth 15100000.ethernet: generated random MAC address 9e:86:ac:15:77:57 [ 0.592146] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc011c00000, irq 76 [ 0.601216] mtk_soc_eth 15100000.ethernet: generated random MAC address 9a:5b:95:8a:85:d5 [ 0.609648] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc011c00000, irq 76 [ 0.618689] (unnamed net_device) (dummy): netif_napi_add() called with weight 256 [ 0.626323] PPP generic driver version 2.4.2 [ 0.630709] PPP BSD Compression module registered [ 0.635414] PPP Deflate Compression module registered [ 0.640498] PPP MPPE Compression module registered [ 0.645280] NET: Registered protocol family 24 [ 0.649728] PPTP driver version 0.8.5 [ 0.653718] xhci-mtk 11200000.xhci: 11200000.xhci supply vbus not found, using dummy regulator [ 0.662351] xhci-mtk 11200000.xhci: 11200000.xhci supply vusb33 not found, using dummy regulator [ 0.671357] xhci-mtk 11200000.xhci: xHCI Host Controller [ 0.676679] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 1 [ 0.687212] xhci-mtk 11200000.xhci: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010 [ 0.696453] xhci-mtk 11200000.xhci: irq 86, io mem 0x11200000 [ 0.702688] hub 1-0:1.0: USB hub found [ 0.706472] hub 1-0:1.0: 1 port detected [ 0.710644] xhci-mtk 11200000.xhci: xHCI Host Controller [ 0.715961] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 2 [ 0.723441] xhci-mtk 11200000.xhci: Host supports USB 3.2 Enhanced SuperSpeed [ 0.730617] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.739066] hub 2-0:1.0: USB hub found [ 0.742845] hub 2-0:1.0: 1 port detected [ 0.747167] i2c /dev entries driver [ 0.752075] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 0.760145] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.769566] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433,alg:7fcdfc00 [ 0.782110] usbcore: registered new interface driver usbhid [ 0.787704] usbhid: USB HID core driver [ 0.792951] u32 classifier [ 0.795671] input device check on [ 0.799639] xt_time: kernel timezone is -0000 [ 0.804088] gre: GRE over IPv4 demultiplexor driver [ 0.808957] ip_gre: GRE over IPv4 tunneling driver [ 0.814676] Initializing XFRM netlink socket [ 0.819279] NET: Registered protocol family 10 [ 0.824489] Segment Routing with IPv6 [ 0.828358] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.834999] NET: Registered protocol family 17 [ 0.839505] Bridge firewalling registered [ 0.843667] l2tp_core: L2TP core driver, V2.0 [ 0.848043] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 0.852825] 8021q: 802.1Q VLAN Support v1.8 [ 0.865985] nmbm nmbm_spim_nand: Signature found at block 1023 [0x07fe0000] [ 0.873592] nmbm nmbm_spim_nand: First info table with writecount 2 found in block 960 [ 0.883452] nmbm nmbm_spim_nand: Second info table with writecount 2 found in block 963 [ 0.891452] nmbm nmbm_spim_nand: NMBM has been successfully attached [ 0.898027] 10 fixed-partitions partitions found on MTD device nmbm_spim_nand [ 0.905158] Creating 10 MTD partitions on "nmbm_spim_nand": [ 0.910724] 0x000000000000-0x000000100000 : "BL2" [ 0.916019] 0x000000100000-0x000000180000 : "u-boot-env" [ 0.921962] 0x000000180000-0x000000380000 : "Factory" [ 0.927565] 0x000000380000-0x000000580000 : "FIP" [ 0.932818] 0x000000580000-0x000003780000 : "ubi" [ 0.938147] 0x000003780000-0x000006980000 : "ubi1" [ 0.943552] 0x000006980000-0x0000069c0000 : "Odm" [ 0.948796] 0x0000069c0000-0x000006a40000 : "Config1" [ 0.954382] 0x000006a40000-0x000006ac0000 : "Config2" [ 0.959972] 0x000006ac0000-0x0000074c0000 : "Storage" [ 1.175505] libphy: dsa slave smi: probed [ 1.180386] mt7530 mdio-bus:1f lan0 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] [ 1.189913] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] [ 1.199429] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] [ 1.208919] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] [ 1.217793] mt7530 mdio-bus:1f: configuring for fixed/2500base-x link mode [ 1.224947] DSA: tree 0 setup [ 1.225193] mt7530 mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 1.235511] UBI: auto-attach mtd5 [ 1.238846] ubi0: attaching mtd5 [ 1.369869] ubi0: scanning is finished [ 1.377959] ubi0: attached mtd5 (name "ubi", size 50 MiB) [ 1.383360] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.390227] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.397004] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.403953] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 [ 1.409949] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 1.417160] ubi0: max/mean erase counter: 102/62, WL threshold: 4096, image sequence number: 1571737675 [ 1.426538] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 19 [ 1.435749] ubi0: background thread "ubi_bgt0d" started, PID 936 [ 1.442333] block ubiblock0_1: created from ubi0:1(rootfs) [ 1.447833] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem [ 1.455187] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.462062] hctosys: unable to open rtc device (rtc0) [ 1.470365] VFS: Mounted root (squashfs filesystem) readonly on device 253:0. [ 1.478962] devtmpfs: mounted [ 1.482126] Freeing unused kernel memory: 448K [ 1.493528] Run /sbin/init as init process INIT: version 2.99 booting create r/w /etc folder create r/w /var folder run /usr/etc/rcS (project/etc.rcS) Starting udev [ 3.294937] udevd[988]: starting version 3.2.10 [ 3.344518] udevd[989]: starting eudev-3.2.10 sysctl: cannot stat /proc/sys/net/ipv4/ip_conntrack_max: error code 2 hwclock: can't open '/dev/misc/rtc': No such file or directory Fri Mar 9 12:34:56 UTC 2018 hwclock: can't open '/dev/misc/rtc': No such file or directory chown: /mydlink: Read-only file system Failed to set owner -root- for -/mydlink-. chmod: /mydlink: Read-only file system Failed to set mode -1400- for -/mydlink-. cat: read error: Is a directory cat: read error: Is a directory cat: read error: Is a directory Starting mount /var/storage: main: do ubi_boot do_check_ubi_mount: /var/storage non-mounted **(mkdir -p /var/storage)** do_ubi_mkdir: create folder /va[ 4.762140] ubi2: attaching mtd10 r/storage ok **(ubiattach /dev/ubi_ctrl -m10 -d2)** [ 4.791975] ubi2: scanning is finished [ 4.800695] ubi2: attached mtd10 (name "Storage", size 10 MiB) [ 4.806544] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.813409] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.820185] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.827134] ubi2: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 [ 4.833041] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 4.840251] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 7827181 [ 4.849108] ubi2: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 19 [ 4.858236] ubi2: background thread "ubi_bgt2d" started, PID 1509 UBI device number 2, total 80 LEBs (10158080 byt[ 4.867564] UBIFS (ubi2:0): Mounting in unauthenticated mode es, 9.6 MiB), av[ 4.874296] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1511 ailable 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) do_ubi_attach: ubi_attach -m10 -d2, ok **(mount -t ubifs ubi2_0 /var/storage)** [ 4.902034] UBIFS (ubi2:0): recovery needed [ 4.948646] UBIFS (ubi2:0): recovery completed [ 4.953166] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "storage" [ 4.960647] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 4.970558] UBIFS (ubi2:0): FS size: 5967872 bytes (5 MiB, 47 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) [ 4.980634] UBIFS (ubi2:0): reserved for root: 281876 bytes (275 KiB) [ 4.987069] UBIFS (ubi2:0): media format: w5/r0 (latest is w5/r0), UUID 7C5C2863-F17C-474B-ADD3-5A0DAD4120F4, small LPT model do_ubi_mount: mount -t ubifs ubi2_0 /var/storage, ok done Starting untar webui-dlink: done Starting paccess: read_psec2datfile: done! done Starting csman: [csmsal_open]feed_csiddata (/tmp/csman/pre1.dat:5291) [csmsal_open]feed_csiddata (/tmp/csman/pre4.dat:538) [csmsal_open]feed_csiddata (/tmp/csman/pre7.dat:466) hookcs_load[182]: section_tag cmark:0x07 secid:0x07 magic:0x2B24 ts:0x0000000E imglen:0x00005802 imgchk:0x7CB9 tagchk:0xF90A [hookcs_load] C Area img Icksum() OK!(7CB9)(7CB9)(5802) hookcs_load[182]: section_tag cmark:0x07 secid:0x07 magic:0x2B24 ts:0x0000000F imglen:0x00005809 imgchk:0xD342 tagchk:0xA279 [hookcs_load] C Area img Icksum() OK!(D342)(D342)(5809) C section 2 is up to date, load C section 2... [csmsal_open]feed_csiddata csection [csm_svr_init]csmsal open("/tmp/csman"), fd=171 done Starting syslogd/klogd: done fs.protected_hardlinks = 1 fs.protected_symlinks = 1 mount: mounting none on /sys/kernel/debug failed: Resource busy Same FW, do nothing Starting commander: Tue Jul 11 03:26:40 UTC 2023 Ether WAN NUM = 1 WAN = XX:XX:XX:XX:XX:CC LAN = XX:XX:XX:XX:XX:CD WLAN0 = XX:XX:XX:XX:XX:CE WLAN1 = XX:XX:XX:XX:XX:CF WLAN2 = XX:XX:XX:XX:XX:D0 WLAN3 = XX:XX:XX:XX:XX:D1 WLAN4 = XX:XX:XX:XX:XX:D2 WLAN5 = XX:XX:XX:XX:XX:D3 WLAN6 = XX:XX:XX:XX:XX:D4 WLAN7 = XX:XX:XX:XX:XX:D5 BEID STATUS : 0 , STATUS OK! [vlan] vlan for M30 - v1.1.9 [vlan] vlan Start [vlan] Complete Cmd WAN = XX:XX:XX:XX:XX:CC LAN = XX:XX:XX:XX:XX:CD WLAN0 = XX:XX:XX:XX:XX:CE WLAN1 = XX:XX:XX:XX:XX:CF WLAN2 = XX:XX:XX:XX:XX:D0 WLAN3 = XX:XX:XX:XX:XX:D1 WLAN4 = XX:XX:XX:XX:XX:D2 WLAN5 = XX:XX:XX:XX:XX:D3 WLAN6 = XX:XX:XX:XX:XX:D4 WLAN7 = XX:XX:XX:XX:XX:D5 BEID STATUS : 0 , STATUS OK! [vlan] Interface br0 Have Down ifconfig: SIOCGIFFLAGS: No such device [vlan] Interface brx0 Have Down [vlan] Brx Interface brx0 Down bridge brx0 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device [vlan] Interface brx1 Have Down [vlan] Brx Interface brx1 Down bridge brx1 doesn't exist; can't delete it ifconfig: SIOCGIFFLAGS: No such device [vlan] Interface brx2 Have Down [vlan] Brx Interface brx2 Down bridge brx2 doesn't exist; can't delete it [vlan] triple play = 0 [vlan] wanNum = 1, lanNum = 4, virturalwanNum = 0 [vlan] wanIndex = 0, lanIndex = 1, virtualwanIndex = 5 [vlan] wan port map: 4 [[ 11.512952] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode vlan] i = 0 posi[ 11.521431] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx tion = 0 type = 1 portIndex = 4 portLogic = 4 portPhyId = 99 [vlan] i = 0 wanPosition = 0 wanIndex = 99 vwBindWanIndex = -1 [vlan] i = 0 wanMac = xxxxxxxxxxcc [vlan] i = 0 portMac = 000000000000 [vlan] i = 0 wanInterface = eth1 [vlan] i = 0 portInterface = eth1 [vlan] lan port map: 0 1 2 3 -1 [vlan] i = 1 position = 1 type = 2 portIndex = 0 portLogic = 0 portPhyId = 0 [vlan] i = 1 lanIndex = 0 [vlan] i = 1 lanMac = xxxxxxxxxxcd [vlan] i = 1 portMac = 000000000000 [vlan] i = 1 portInterface = eth0 [vlan] i = 1 lanInterface = [vlan] i = 2 position = 2 type = 2 [ 11.581369] br0: port 1(lan0) entered blocking state portIndex = 1 po[ 11.587644] br0: port 1(lan0) entered disabled state rtLogic = 1 port[ 11.594145] device lan0 entered promiscuous mode PhyId = 1 [vlan] i = 2 lanIndex = 1 [vlan] i = 2 lanMac = ca787deba0cd [vl[ 11.605861] br0: port 2(lan1) entered blocking state an] i = 2 portMa[ 11.611889] br0: port 2(lan1) entered disabled state c = 000000000000[ 11.618374] device lan1 entered promiscuous mode [vlan] i = 2 portInterface = eth0 [vlan] i = 2 lanInterface = [vlan] i =[ 11.630031] br0: port 3(lan2) entered blocking state 3 position = 3 [ 11.636122] br0: port 3(lan2) entered disabled state type = 2 portInd[ 11.642611] device lan2 entered promiscuous mode ex = 2 portLogic = 2 portPhyId = 2 [vlan] i = 3 lanIndex = 2 [vlan] i = 3 la[ 11.654127] br0: port 4(lan3) entered blocking state nMac = ce787deba[ 11.660368] br0: port 4(lan3) entered disabled state 0cd [vlan] i =[ 11.666857] device lan3 entered promiscuous mode 3 portMac = 000000000000 [vlan] i = 3 portInterface = eth0 [vlan] i = 3 lanInterface = [vlan] i = 4 position = 4 type = 2 portIndex = 3 portLogic = 3 portPhyId = 3 [vlan] i = 4 lanIndex = 3 [vlan][ 11.689424] device eth0 entered promiscuous mode i = 4 lanMac = [ 11.695735] mt7530 mdio-bus:1f lan0: configuring for phy/gmii link mode c2787deba0cd [[ 11.704078] 8021q: adding VLAN 0 to HW filter on device lan0 vlan] i = 4 portMac = 000000000000 [vlan] i = 4 portInterface = eth0 [vlan] i = 4 lanInterface = [vlan] i = 1 lanInterface = lan0 [vlan] i = 2 lanInter[ 11.723239] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode face = lan1 [v[ 11.731572] 8021q: adding VLAN 0 to HW filter on device lan1 lan] i = 3 lanInterface = lan2 [vlan] i = 4 lanInterface = lan3 [vlan] Vlan First Run [vlan] Interface eth0 Have Up set hello timer failed: Result not r[ 11.751352] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode epresentable [[ 11.759132] 8021q: adding VLAN 0 to HW filter on device lan2 vlan] Br Add Lan Interface: lan0 [vlan] Br Add Lan Interface: lan1 [vlan] Br Add Lan Interface: lan2 [vlan] Br Add Lan Interface: lan3 [vlan] Interface [ 11.779028] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode eth0 Have Up [[ 11.786649] 8021q: adding VLAN 0 to HW filter on device lan3 vlan] Interface lan0 Have Up [vlan] Lan Interface lan0 Up [vlan] Interface lan1 Have Up [vlan] Lan Interface lan1 Up [vlan] Interface lan2 Have Up [vlan] Lan Interface lan2 Up [vlan] Interface lan3 Have Up [vlan] Lan Interface lan3 Up [vlan] Interface br0 Have Up [vlan] Br Interface br0 Up [ 11.834069] MediaTek MT7981 PHY mdio-bus:00: TX-VCM SW cal result: 0x3 [ 11.841451] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:00] driver [MediaTek MT7981 PHY] [ 11.850058] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/gmii link mode [vlan] Interface eth1 Have Up [vlan] Wan Interface eth1 Up [vlan] vlan End NETWORK Initialization finished. Result: 0 init watchdog init vlan init lan Init Lan init stp init ondemand init multiwan Initialize MultiWAN wantype = 0, wantype index = 99, wan mode = 1, route enable = 1 fo enable = 0, fo stay enable = 0, fo trigger = 0, fo time = 0, fo sequence = 0 init multi_ondemand init spap init ddns init snmp SNMP Enterprise Number = 12823 SNMP Enterprise Name = SNMP Enterprise OID = 1.3.6.1.4.1.12823 SNMP Version: 5.8 init time sh: line 1: snmpd-action: command not found Get time from RTC(ds3232) sh: line 1: /sys/class/i2c-adapter/i2c-1/new_device: No such file or directory init user hwclock: can't open '/dev/misc/rtc': No such file or directory init dhcpsrv device br0 already exists; can't create bridge with the same name IP = 192.168.200.001 Mask = 255.255.255.000 (ffffff00) - aka /24 IP range start = 192.168.200.1 IP range end = 192.168.200.254 DHCP Server IP pool start = 192.168.200.100 DHCP Server IP pool end = 192.168.200.249 sip : 1, eip : 254 ptr_ip_start : 100 , ptr_ip_end : 249 DHCP Server IP pool OKOK!! BusyBox v1.27.2 () multi-call binary. Usage: rm [-irf] FILE... BusyBox v1.27.2 () multi-call binary. Usage: rm [-irf] FILE... dnsmasq config start dnsmasq config end Start Dnsmasq DHCP at init init dnsrelay init routing init route_protocol init nat init keepalive init syslog_interval_timer init schedule init ftp_alg init rtsp_alg start the RTSP ALG modules rmmod: can't unload module 'nf_nat_rtsp': No such file or directory rmmod: can't unload module 'nf_conntrack_rtsp': No such file or directory [ 16.252722] nf_conntrack_rtsp v0.7 loading ==NAT Stop wan999 ALL== NAT nat-draft stop rul[ 16.263232] nf_nat_rtsp v0.7 loading e start Flush ip route cache handle_rtsp_alg: load RTSP ALG modules init qos init reboot init reset_btn init sshd Add the DROP rules for outgoing packets init sip_alg init https init wireless_mode module 1 INIT AP ROUTER MODE Module One AP ROUTER MODE module 2 INIT AP ROUTER MODE Module Two AP ROUTER MODE spi_exception_deinit start dnsmasq config start spi end clear /usr/bin/spi spi_exception_deinit mmi_nat_stop mmi_nat_start NAT nat-draft stop rule end ==NAT Start wan999 ALL== NAT nat-draft stop rule start Flush ip route cache spi_exception_deinit start dnsmasq config end init wlanap can not find cisd(8000F500) on Psetion can not find cisd(8000F501) on Psetion spi end clear /usr/bin/spi spi_exception_deinit init wpa init wlanapcli_profile mmi_nat_stop Initial WLANAPCLI_PROFILE init iom mmi_nat_start NAT nat-draft stop rule end NAT nat-draft start rule start sh: line 1: event_managed: command not found init wan_led init status_led init igmp All Log Alert options from Firewall are disable. init mupnpd init recent init bonjour nat-draft stop_ip_forward start nat-draft stop_ip_forward end mwlb start mwlb end admin start admin end virtual computer start virtual computer end wanalias start wanalias end portfwd start portfwd end Single DMZ start init dnscrypt_proxy init aplan Start init_aplan... init pptp init pptpserv init l2tp [ 16.652465] mtk_soc_eth 15100000.ethernet eth0: TX vlan offload cannot be enabled when dsa is attached. init gre init ipsec init x509 init scep init vrrp init ntpsrv init ipv6 init v6filter init ddnsv6 init grouping init recieve_alter_mode init guestzone init mesh nat_info.wan_index == 999 mac-control start mac-control end init mydlink init WPS init ClientInfo init dlink_fota init dlink_speedtest init_speedtest[42]: STORAGE_PATH: /var/storage/speedtest init eventX_monitor discard_ping start discard_ping end read_csid2rawfile: done! inblkwpkts start read_csid2rawfile: done! inblkwpkts end adjust_mss start size=16384 num=64 uir_thread_count=80 select timeout=10 0 adjust_mss end Add temporary fwd_BT rules (check_fwd_recent: 0) Remove temporary fwd_BT rules done fwd-recent start fwd-recent end Create regular thread: watchdog Create regular thread: time Create regular thread: eventX_monitor WiFi Module One Operation Mode is changed WiFi Module Two Operation Mode is changed WiFi Operation Mode is Changed and Apply Wirelessmode Alter from Commander Disable WAN bridges to LAN NAT alg start NAT alg end device eth1 is not a port of br0 Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) pkt-filter start pkt-filter end pkt-filterv6 start pkt-filterv6 end Sorry, rule does not exist. Module One AP ROUTER MODE Module Two AP ROUTER MODE [ 17.269382] watchdog: watchdog0: watchdog did not stop! l7appblk start l7appblk end ## Error: "AMIT_BOOT_VERSION" not defined url-block start fwd_block_url_file_extension url-block end ## Error: "AMIT_BOOT_BRANCH" not defined url-block start fwd_block_url url-block end nat-draft start_ip_forward start sh /var/nat/ip_forward.clr dnsmasq config start [ 17.397475] mtk_soc_eth 15100000.ethernet eth0: TX vlan offload cannot be enabled when dsa is attached. ## Error: "AMIT_BOOT_BUILDTIME" not defined nat-draft start_ip_forward end stealth-mode start dnsmasq config end stealth-mode end spi_exception_deinit start spi end spi_exception_init start spi end pre_spi_mode start spi end security_v6 start security_v6 end Conntrack -F start Wait 2 seconds wlan_phase_two_config killall: rt2860apd: no process killed Wireless 8021X Stop killall: mosquitto: no process killed killall: EasyMeshDaemon: no process killed killall: emhandler: no process killed killall: emLooping: no process killed killall: emDiscovery: no process killed killall: mapd: no process killed killall: p1905_managerd: no process killed killall: wapp: no process killed update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) INIT: Entering runlevel: 5up link Configuring network interfaces... RTNETLINK answers: File exists Disable WLAN interface. WLAN Two interface down! ifconfig: SIOCGIFFLAGS: No such device interface rax0 does not exist! ifconfig: SIOCGIFFLAGS: No such device interface rax1 does not exist! ifconfig: SIOCGIFFLAGS: No such device interface rax2 does not exist! ifconfig: SIOCGIFFLAGS: No such device WLAN One interface down! ifconfig: SIOCGIFFLAGS: No such device interface ra0 does not exist! ifconfig: SIOCGIFFLAGS: No such device interface ra1 does not exist! ifconfig: SIOCGIFFLAGS: No such device interface ra2 does not exist! ifconfig: SIOCGIFFLAGS: No such device rmmod: can't unload module 'mt_whnat': No such file or directory killall: fwdd: no process killed rmmod: can't unload module 'mtfwd': No such file or directory rmmod: can't unload module 'mt_wifi_ap': No such file or directory rmmod: can't unload module 'mt7915_mt_wifi_ap': No such file or directory killall: ACSDaemon: no process killed Enable WLAN interface. assigned dat_path:/etc/wireless/l1profile.dat dat_path:/etc/wireless/l1profile.dat assigned dat_path:/etc/wireless/mt7981.dbdc.b0.dat assigned csid_index:1 dat_path:/etc/wireless/mt7981.dbdc.b0.dat assigned dat_path:/etc/wireless/mt7981.dbdc.b1.dat assigned csid_index:2 dat_path:/etc/wireless/mt7981.dbdc.b1.dat [ 19.638518] conninfra@(mtk_conninfra_drv_init:644) Before platform_driver_register [ 19.646209] Get Index(0-TOP_MISC_BASE) phy_addr(0x11d10000) vir_addr=(0xffffffc010c7b000) size=(0x1000) [ 19.655606] Get Index(1-TOPRGU_BASE) phy_addr(0x1001c000) vir_addr=(0xffffffc010c7f000) size=(0x1000) [ 19.664818] Get Index(2-GPIO_BASE) phy_addr(0x11d00000) vir_addr=(0xffffffc010cc6000) size=(0x1000) [ 19.673859] Get Index(3-IOCFG_TR_BASE) phy_addr(0x11f00000) vir_addr=(0xffffffc010cc8000) size=(0x1000) [ 19.683242] Get Index(4-IOCFG_TL_BASE) phy_addr(0x11f10000) vir_addr=(0xffffffc010cca000) size=(0x1000) [ 19.692630] Get Index(5-INFRACFG_AO_BASE) phy_addr(0x10003000) vir_addr=(0xffffffc010ccf000) size=(0x1000) [ 19.702274] Get Index(6-CONN_INFRA_CFG_BASE) phy_addr(0x18001000) vir_addr=(0xffffffc010cd1000) size=(0x1000) [ 19.712181] Get Index(7-CONN_INFRA_SYSRAM_BASE) phy_addr(0x18050000) vir_addr=(0xffffffc010cd7000) size=(0x1000) [ 19.722345] Get Index(8-CONN_INFRA_CLKGEN_ON_TOP_BASE) phy_addr(0x18009000) vir_addr=(0xffffffc010cd9000) size=(0x1000) [ 19.733119] Get Index(9-CONN_HOST_CSR_TOP_BASE) phy_addr(0x18060000) vir_addr=(0xffffffc010cdb000) size=(0x1000) [ 19.743289] Get Index(10-CONN_INFRA_BUS_CR_BASE) phy_addr(0x1800e000) vir_addr=(0xffffffc010cdd000) size=(0x1000) [ 19.753545] Get Index(11-CONN_INFRA_RGU_BASE) phy_addr(0x18000000) vir_addr=(0xffffffc010cef000) size=(0x1000) [ 19.763539] Get Index(12-CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18005000) vir_addr=(0xffffffc010cf1000) size=(0x1000) [ 19.773976] Get Index(13-INST2_CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18085000) vir_addr=(0xffffffc010cff000) size=(0x1000) [ 19.784923] Get Index(14-CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18004000) vir_addr=(0xffffffc010d01000) size=(0x1000) [ 19.795352] Get Index(15-INST2_CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18084000) vir_addr=(0xffffffc010d03000) size=(0x1000) [ 19.806298] Get Index(16-CONN_SEMAPHORE_BASE) phy_addr(0x18070000) vir_addr=(0xffffffc010d40000) size=(0x10000) [ 19.816380] Get Index(17-CONN_AFE_CTL_BASE) phy_addr(0x18003000) vir_addr=(0xffffffc010d05000) size=(0x1000) [ 19.826195] Get Index(18-CONN_AFE_CTL_2ND_BASE) phy_addr(0x18083000) vir_addr=(0xffffffc010d07000) size=(0x1000) [ 19.836364] Get Index(19-WF_TOP_SLPPROT_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010d60000) size=(0x10000) [ 19.846706] Get Index(20-WF_TOP_CFG_BASE) phy_addr(0x184b0000) vir_addr=(0xffffffc010d09000) size=(0x1000) [ 19.856353] Get Index(21-WF_MCU_CONFIG_LS_BASE) phy_addr(0x184f0000) vir_addr=(0xffffffc010d0f000) size=(0x1000) [ 19.866521] Get Index(22-WF_MCU_BUS_CR_BASE) phy_addr(0x18400000) vir_addr=(0xffffffc010d11000) size=(0x1000) [ 19.876431] Get Index(23-WF_MCUSYS_INFRA_BUS_FULL_U_DEBUG_CTRL_AO_BASE) phy_addr(0x18500000) vir_addr=(0xffffffc010d13000) size=(0x1000) [ 19.888679] Get Index(24-WF_TOP_CFG_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010d90000) size=(0x10000) [ 19.898672] conninfra@(consys_plt_hw_init:162) adie_cfg_type = 1, one_adie_dbdc = 1 [ 19.906327] [emi_mng_init] gConEmiPhyBase = [0x47c80000] size = [0x100000] fw size = [0x100000] ops=[00000000b69c29d6] [ 19.917119] conninfra@(mtk_conninfra_drv_init:650) After platform_driver_register [ 19.924999] ConnInfra Dev: init (0) [ 19.930789] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000) [ 19.940679] conninfra@(connsys_d_die_cfg:365) D-die efuse: 0x00000000 [ 19.948143] conninfra@(_connsys_a_die_cfg_7976:918) adie_idx[0], A-die CHIP ID = 0x7976, HW Version = 0x8a10 [ 19.958968] conninfra@(consys_spi_write_nolock:501) addr=0x0a00, val=0xffffffff [ 19.967275] conninfra@(consys_spi_write_nolock:501) addr=0x04ac, val=0x0000001c [ 19.975583] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002 [ 19.984897] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x00000000 [ 19.994211] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x43a60000 [ 20.007555] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008800b9, 0x00000000] [ 20.019073] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002 [ 20.028391] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a6003a [ 20.037706] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63a7003a [ 20.051049] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008800b9, 0x00000000] [ 20.062564] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002 [ 20.071881] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a7003a [ 20.081200] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63ac003a [ 20.094546] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008800b9, 0x00000000] [ 20.106062] conninfra@(consys_spi_write_nolock:501) addr=0x0038, val=0x4a563b00 [ 20.114367] conninfra@(consys_spi_write_nolock:501) addr=0x065c, val=0x1d59080f [ 20.122673] conninfra@(consys_spi_write_nolock:501) addr=0x0664, val=0x34c00fe0 [ 20.130987] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x88888005 [ 20.140252] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x00000005 [ 20.148494] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000) [ 20.158314] conninfra@(_consys_hw_conninfra_wakeup:469) conninfra_wakeup refcnt=[0]->[1] wakeup!! [ 20.167186] conninfra@(_consys_hw_conninfra_sleep:489) conninfra_sleep refcnt=[1]->[0] sleep!! [ 20.175792] conninfra@(opfunc_power_on_internal:236) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[0] CONNINFRA=[1] [ 20.211039] mediatek_soc_hnat 15100000.hnat: wan = eth1 [ 20.216333] mediatek_soc_hnat 15100000.hnat: lan = lan [ 20.221501] mediatek_soc_hnat 15100000.hnat: ppd = eth0 [ 20.226748] mediatek_soc_hnat 15100000.hnat: gmac num = 2 [ 20.232153] mediatek_soc_hnat 15100000.hnat: ppe num = 1 [ 20.238030] mediatek_soc_hnat 15100000.hnat: PPE0 entry number = 8192 [ 20.244792] mediatek_soc_hnat 15100000.hnat: PPE0 hwnat start [ 20.250583] hnat roaming work enable conntrack v1.4.6 (conntrack-tools): connection tracking table has been emptied. Conntrack -F end NAT nat-draft start rule end [ 21.312027] mt_wifi: module license 'Proprietary' taints kernel. [ 21.318043] Disabling lock debugging due to kernel taint [ 21.357182] conninfra@(conninfra_pwr_on:120) [conninfra_pwr_on] drv=[3] [ 21.364736] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000) [ 21.382594] Adie Type: 0x7976 [ 21.382597] SKU Type: 3000 [ 21.386514] conninfra@(opfunc_power_on_internal:236) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[1] CONNINFRA=[1] [ 21.400574] WiFi@C12L1,get_dbg_setting_by_profile() 4309: debug level setting=INDEX0_debug_level not found!! [ 21.410419] WiFi@C12L1,get_dbg_setting_by_profile() 4332: debug option setting=INDEX0_debug_option not found!! [ 21.420479] mt_rbus 0000:00:00.0: runtime IRQ mapping not provided by arch [ 21.441201] mt7981_init()--> [ 21.444106] Use the default iPAiLNA bin image! [ 21.448600] <--mt7981_init() [ 21.451512] RtmpRaDevCtrlInit:3469 => wlan_if_prefix:ra [ 21.456757] RtmpRaDevCtrlInit:3469 => wlan_if_prefix:rax [ 21.462070] RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(288) > 128! [ 21.469556] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX1 [ 21.476876] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX2 [ 21.484198] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX3 [ 21.491513] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX4 [ 21.498833] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX5 [ 21.506149] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX6 [ 21.513470] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX7 [ 21.520787] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX8 [ 21.528106] WiFi@C12L1,match_index_by_chipname() 580: not find chip name INDEX9 [ 21.535408] WiFi@C12L2,match_index_by_chipname() 584: Not find slot id, back to old rule. [ 21.543688] msta_ifname not found [ 21.644125] warp_module_init(): module init and register callback for warp [ 21.651034] create warp_ctrl ok!!! [ 21.654480] wed_get_slot_map(): assign slot_id:0 for entry: 0! [ 21.660326] wed_get_slot_map(): assign slot_id:1 for entry: 1! [ 21.693814] mtk_warp_proxy: module uses symbols from proprietary module mt_wifi, inheriting taint. WLAN One interface up! [ 21.709840] WiFi@C01L2,RTMP_COM_IoctlHandle() 1510: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT [ 21.718143] msta_ifname not found [ 21.721987] client_get_axi_slot_id(): wrong BUS_TYPE [ 21.726955] warp_cap_support(): chip_id=7981 is in WHNAT support list [ 21.733398] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 00000000fb0f3ac1 [ 21.742090] client_hif_specific_get(): hw->base_phy_addr 0x18000000!! [ 21.748527] client_chip_specific_get(): 0x7981 chip id 0x7981!! [ 21.754530] warp_entry_get_by_pdev(): return entry[0] [ 21.759752] warp_msg_register():warp,pid,2789,id,0,wed_idx,0 [ 21.765420] warp_dev0 15010000.wed: Using 32bit DMA for streaming map [ 21.771858] warp_dev0 15010000.wed: Using 32bit DMA for coherent map [ 21.778234] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc010d1d000 [ 21.787404] wed_ring_init(): wed tx ring init result = 0 [ 21.793164] wed_ring_init(): wed rx ring init result = 0 [ 21.802749] GetEntryFromFreeList: allocated new pool [ 21.809392] GetEntryFromFreeList: allocated new pool [ 21.816029] GetEntryFromFreeList: allocated new pool [ 21.822622] GetEntryFromFreeList: allocated new pool [ 21.829602] create wed ok!!! [ 21.832500] wdma_init(): wdma(0) base_addr=0xffffffc010d3d800, base_phy_addr=0x15104800 [ 21.841232] warp_woif_bus_init_hw(): bus:00000000e5d6dc63, txring: 20, pa: 0x0000000050d1e000, 0x0000000050d1e000, 24, 28, 3c [ 21.852556] warp_woif_bus_init_hw(): bus:00000000e5d6dc63, rxring: 50, pa: 0x0000000050928000, 0x0000000050928000, 54, 58, 6c [ 21.863915] get_region_info(): wed_idx = 0, base_addr = 0x000000004735ef7c, size = 0x40000, res.start = 0x47d80000, shared:0 [ 21.875143] get_region_info(): wed_idx = 0, base_addr = 0x00000000c1f4b613, size = 0x8000, res.start = 0x151e0000, shared:0 [ 21.886316] get_region_info(): wed_idx = 0, base_addr = 0x000000005173b800, size = 0x240000, res.start = 0x47dc0000, shared:1 [ 21.897633] get_region_info(): wed_idx = 0, base_addr = 0x00000000aa643093, size = 0x1000, res.start = 0x15194000, shared:0 [ 21.908758] warp_fwdl_mcu_mode(): mcu mode, need fwdl [ 21.951226] ########## WO Firmware ########## [ 21.955619] Chip ID: 0x0000 [ 21.958415] ECO version:0 [ 21.961033] Version: DEV_000000 [ 21.964180] Build date: 20220901175230 [ 21.967923] Total region:3 [ 21.970629] ################################# [ 21.974979] Parsing tailer region 0 [ 21.978466] Target address: 0x151e0000 [ 21.982295] Download size: 20768 [ 21.985635] Parsing tailer region 1 [ 21.989111] Target address: 0x47d80000 [ 21.992944] Download size: 86224 [ 21.996330] Parsing tailer region 2 [ 21.999823] Target address: 0x47dc0000 [ 22.003654] Download size: 2319824 [ 22.009272] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu [ 22.029816] warp_fwdl_ready_check_mcu_mode(): wocpu is ready [ 22.035495] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE [ 22.041417] wo_proc_init done 000000000e15c160 [ 22.045950] wo_exep_proc_init done 000000000e15c160 [ 22.050946] wo_exception_init(0): exp log= 0x0000000019924472, phy_addr= 0x0000000050b50000 size= 32768 [ 22.139091] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78 [ 22.145704] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78 [ 22.152317] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78 [ 22.158929] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=177 [ 22.165627] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=177 [ 22.172324] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177 [ 22.179325] WiFi@C23L3,auto_ch_select_set_cfg() 3481: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 [ 22.188888] WiFi@C23L3,auto_ch_select_set_cfg() 3481: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3 [ 22.248055] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=0, Desired MFPC=1 [ 22.255449] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=1, Desired MFPC=1 [ 22.262844] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=2, Desired MFPC=1 [ 22.270237] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=3, Desired MFPC=1 [ 22.277633] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=4, Desired MFPC=1 [ 22.285025] WiFi@C15L1,Set_PMFMFPC_Proc() 1721: [PMF] :: apidx=5, Desired MFPC=1 [ 22.294417] WiFi@C12L1,RTMPSetProfileParameters() 8614: ra0, QoSMgmtCapa=0 [ 22.301287] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 [ 22.308417] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 [ 22.315552] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 [ 22.322684] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 [ 22.329815] WiFi@C12L1,RTMPSetProfileParameters() 8614: (null), QoSMgmtCapa=0 [ 22.342799] WiFi@C12L1,rtmp_read_ap_client_from_file() 1641: APCLI[0] ApCliMuMimoDlEnable = 0 [ 22.351318] WiFi@C12L1,rtmp_read_ap_client_from_file() 1641: APCLI[1] ApCliMuMimoDlEnable = 0 [ 22.360010] WiFi@C12L1,rtmp_read_ap_client_from_file() 1660: APCLI[0] ApCliMuMimoUlEnable = 0 [ 22.368527] WiFi@C12L1,rtmp_read_ap_client_from_file() 1660: APCLI[1] ApCliMuMimoUlEnable = 0 [ 22.378960] WiFi@C03L1,AndesSendCmdMsg() 753: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD [ 22.390169] WiFi@C03L2,AndesSendCmdMsg() 763: Command type = ed, Extension command type = 48 [ 22.398607] WiFi@C03L1,AndesSendCmdMsg() 753: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD [ 22.409814] WiFi@C03L2,AndesSendCmdMsg() 763: Command type = ed, Extension command type = 48 [ 22.489965] wdma_dma_ctrl(): WDMA_GLO_CFG=50404e70, txrx = 0 [ 22.500612] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e70, txrx = 0 [ 22.514506] warp_tx_ring_init_hw(): configure ring 0 setting [ 22.520190] warp_tx_ring_init_hw(): wed:00000000f3a1a5b5 wifi:000000006ab548bc: 24420=526e0000,24424=2048,24428=0 [ 22.530450] warp_tx_ring_init_hw(): configure ring 1 setting [ 22.536107] warp_tx_ring_init_hw(): wed:00000000f3a1a5b5 wifi:000000006ab548bc: 24430=54360000,24434=2048,24438=0 [ 22.546482] set_rrocfg,0 [ 22.571876] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e74, txrx = 3 [ 22.577534] using E1 ROM patch [ 22.580575] using E1 RAM [ 22.583113] current sync CR = 0x1 [ 22.586425] Built date: 20220901174831a [ 22.590354] Platform: ALPS [ 22.593137] HW/SW version: 0x8a108a10 [ 22.596887] Patch version: 0xffffffff [ 22.604622] current sync CR = 0x1 [ 22.607940] Chip ID: 0x14 [ 22.610647] Eco version: 0x00 [ 22.613698] Region number: 0x0b [ 22.616915] Format version: 0x02 [ 22.620230] Format flag: 0x01 [ 22.623282] Ram version: ____000000 [ 22.626861] Built date: 20220901174855 [ 22.630698] Common crc: 0x62c52fee [ 22.634184] Release info: header tag = 0, total length = 64 [ 22.639836] tag 1, padding length = 1, tag length = 59 [ 22.645057] payload: t-neptune-main-mt7915-1953-MT7981_MP2111_IMP-20220901174750 [ 22.672811] Chip ID: 0x00 [ 22.675528] Eco version: 0x00 [ 22.678583] Region number: 0x03 [ 22.681808] Format version: 0x02 [ 22.685111] Format flag: 0x01 [ 22.688162] Ram version: DEV_000000 [ 22.691742] Built date: 20220901175135 [ 22.695581] Common crc: 0xdc1c7789 [ 22.699064] Release info: header tag = 0, total length = 0 [ 22.784925] current sync CR = 0x7 [ 22.788266] efuse_probe: efuse = deaddead [ 22.795779] WiFi@C02L1,is_cal_free_ic() 830: [a-die version:1] [ 25.076031] mac_len = 6 [ 25.078603] WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now! [ 25.086159] WiFi@C01L1,AntCfgInit() 3620: Not support for HIF_MT yet! [ 25.105402] ch_switch_monitor_state_machine_init:: enter [ 25.110725] ch_switch_monitor_cfg_reset:: enter [ 25.115270] ch_switch_monitor_cfg_reset:: enter [ 25.120083] WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet! [ 25.125908] WiFi@C12L1,SCS_init() 879: INIT SCSEnable [0]= 1 [ 25.131603] WiFi@C12L1,SCS_init() 886: INIT SCSEnable [1]= 0 [ 25.137379] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 25.142904] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 25.148393] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited! [ 25.175230] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3 [ 25.181000] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 25.186523] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 25.192024] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! [ 25.201939] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13443: DAT config band(0) cck_timeout Fail! [ 25.210636] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! [ 25.220545] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13454: DAT config band(0) ofdm_timeout Fail! [ 25.229321] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! [ 25.239226] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13465: DAT config band(0) ofdma_timeout Fail! [ 25.248089] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! [ 25.257993] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13443: DAT config band(1) cck_timeout Fail! [ 25.266687] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! [ 25.276596] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13454: DAT config band(1) ofdm_timeout Fail! [ 25.285375] WiFi@C00L1,set_ack_timeout_mode_byband() 13356: CTS/ACK Timeout Range should between [0xFFFF:0]!! [ 25.295280] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13465: DAT config band(1) ofdma_timeout Fail! [ 25.306710] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] [ 25.317252] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] [ 25.443423] :(op = 1) [ 25.450534] WiFi@C00L1,FastPathCheckMIC() 1009: (ret = 0)(op:1) [ 25.456480] WiFi@C00L2,red_tail_drop_init() 82: red_tail_drop_init: available token:8192, whnat_en:1 [ 25.465636] WiFi@C00L1,MtCmdCr4RedSet() 913: MtCmdCr4RedSet: (ret = 0) [ 25.472162] WiFi@C00L1,SendRedCmd() 1048: SendRedCmd:(ret = 1) [ 25.478178] WiFi@C01L2,RTMP_COM_IoctlHandle() 1487: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP [ 25.486186] WiFi@C01L3,wifi_sys_open() 855: wdev idx = 0 [ 25.491755] WiFi@C18L3,BuildChannelList() 484: [ 25.496313] WiFi@C00L3,BuildChannelList() 512: BandIdx = 0, PhyMode = 78, ChListNum = 13: [ 25.504498] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.510876] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.517329] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.523705] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.530163] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.536520] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.542965] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.549315] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.555754] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.562103] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.568547] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.574899] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.581335] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.587685] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.594124] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.600473] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.606911] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.613259] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.619700] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.626050] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.632490] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.638838] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.645278] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.651627] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.658064] WiFi@C14L1,vht80_channel_group() 1570: invalid ch_band 0 [ 25.664413] WiFi@C14L1,vht160_channel_group() 1639: invalid ch_band 0 [ 25.670849] WiFi@C23L1,DfsBuildChannelList() 3663: [RDM]: wdev is not 5G. [ 25.677652] WiFi@C23L3,RadarStateCheck() 243: Zero Wait State: 0 [ 25.683718] WiFi@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(0), ht_bw(1), extcha(3), vht_bw(0), cen_ch_2(0), PhyMode=78! [ 25.695208] phy_freq_adjust : no prim_ch value for adjust! [ 25.700692] WiFi@C23L1,operate_loader_phy() 397: phy_freq_adjust failed!WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xa4/0x150 [mt_wifi] [ 25.714118] wdev_attr_update(): wdevId0 = XX:XX:XX:XX:XX:ce [ 25.719739] WiFi@C12L1,wifi_sys_open() 902: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0 [ 25.728738] WiFi@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=0 [ 25.734592] WiFi@C23L1,HcGetBandByChannel() 1229: No hdev parking on channel:0, just return a default band_idx 0! [ 25.744886] WiFi@C02L2,AsicRadioOnOffCtrl() 2338: DbdcIdx=0 RadioOn [ 25.751824] WiFi@C00L2,ApAutoChannelAtBootUp() 333: -----------------> [ 25.758477] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 25.763994] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 25.769641] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x108/0x430 [mt_wifi])!! [ 25.781980] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 26.153806] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 26.525802] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 26.645895] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:ApUpdateCapabilityAndErpIe+0x334/0x544 [mt_wifi])!! [ 26.897820] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 27.269816] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 27.641821] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 28.013802] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 28.385824] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 28.757807] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 29.129812] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 29.501805] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 29.873806] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 30.245797] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 30.617985] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x25c/0x430 [mt_wifi])!! [ 30.630279] WiFi@C23L3,SelectClearChannelBusyTime() 1880: ==================================================================== [ 30.641667] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 1 : Busy Time = 7032, Skip Channel = FALSE, BwCap = TRUE [ 30.653048] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 2 : Busy Time = 17555, Skip Channel = FALSE, BwCap = TRUE [ 30.664432] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 3 : Busy Time = 11268, Skip Channel = FALSE, BwCap = TRUE [ 30.675811] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 4 : Busy Time = 2314, Skip Channel = FALSE, BwCap = TRUE [ 30.687195] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 5 : Busy Time = 6421, Skip Channel = FALSE, BwCap = TRUE [ 30.698573] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 6 : Busy Time = 9584, Skip Channel = FALSE, BwCap = TRUE [ 30.709965] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 7 : Busy Time = 16968, Skip Channel = FALSE, BwCap = TRUE [ 30.721355] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 8 : Busy Time = 21978, Skip Channel = FALSE, BwCap = TRUE [ 30.732740] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 9 : Busy Time = 13803, Skip Channel = FALSE, BwCap = TRUE [ 30.744119] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 10 : Busy Time = 14806, Skip Channel = FALSE, BwCap = TRUE [ 30.755500] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 11 : Busy Time = 6740, Skip Channel = FALSE, BwCap = TRUE [ 30.766879] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 12 : Busy Time = 16610, Skip Channel = FALSE, BwCap = TRUE [ 30.778262] WiFi@C23L3,SelectClearChannelBusyTime() 1883: Channel 13 : Busy Time = 16966, Skip Channel = FALSE, BwCap = TRUE [ 30.789640] WiFi@C23L3,SelectClearChannelBusyTime() 1889: ==================================================================== [ 30.801027] WiFi@C23L3,SelectClearChannelBusyTime() 2124: Rule 3 Channel Busy time value : Select Primary Channel 4 [ 30.811452] WiFi@C23L3,SelectClearChannelBusyTime() 2126: Rule 3 Channel Busy time value : Min Channel Busy = 2314 [ 30.821796] WiFi@C23L3,SelectClearChannelBusyTime() 2128: Rule 3 Channel Busy time value : BW = 20 [ 30.825824] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xac/0xd4 [mt_wifi])!! [ 30.830758] WiFi@C23L3,SelectClearChannelBusyTime() 2166: [SelectClearChannelBusyTime] - band0 END [ 30.851878] WiFi@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(4), ht_bw(1), extcha(1), vht_bw(0), cen_ch_2(0), PhyMode=78! [ 30.863356] WiFi@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(1), prim_ch(4), cen_ch_1(6), cen_ch_2(0),ext_cha(1)! [ 30.874835] WiFi@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(1), prim_ch(4), cen_ch_1(6), cen_ch_2(0)! [ 30.885745] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 31.035671] WiFi@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 [ 31.046651] WiFi@C23L1,DfsBuildChannelList() 3663: [RDM]: wdev is not 5G. [ 31.053441] WiFi@C23L3,zero_wait_dfs_switch_ch() 924: outband ch 0, ch_stat 0 [ 31.060777] WiFi@C08L2,APStartUpForMbss() 983: ===>(caller:ap_inf_open+0x144/0x4f0 [mt_wifi]), mbss_idx:0, CfgMode:0 [ 31.071334] WiFi@C15L2,APPMFInit() 130: [PMF] apidx=0, MFPC=1, MFPR=0, SHA256=0 [ 31.078664] WiFi@C18L3,BuildChannelList() 484: [ 31.083429] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] [ 31.090985] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 31.096448] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 31.263303] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 31.573620] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 31.579072] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 31.746233] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 32.085614] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 32.091065] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 32.257966] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 32.597614] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 32.603065] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 32.771160] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 33.109610] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 33.115050] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 33.281959] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 33.621613] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 33.627050] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 33.793943] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 34.133632] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 34.139070] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 34.305593] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 34.645611] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 34.651047] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 34.817584] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 35.157622] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 35.163059] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 35.329716] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 35.669609] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 35.675046] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 35.841705] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 36.045804] WiFi@C08L1,UpdateBeaconHandler() 1890: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xac/0xd4 [mt_wifi])!! [ 36.181626] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 36.187065] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 36.353581] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 36.693613] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 36.699052] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 36.866112] WiFi@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 37.205509] WiFi@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(4), ht_bw(1), extcha(1), vht_bw(0), cen_ch_2(0), PhyMode=78! [ 37.216993] WiFi@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(1), prim_ch(4), cen_ch_1(6), cen_ch_2(0),ext_cha(1)! [ 37.228471] WiFi@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(1), prim_ch(4), cen_ch_1(6), cen_ch_2(0)! [ 37.239387] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 37.389351] WiFi@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 [ 37.400333] WiFi@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(4), ht_bw(0), extcha(0), vht_bw(0), cen_ch_2(0), PhyMode=78! [ 37.411812] WiFi@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(0), prim_ch(4), cen_ch_1(4), cen_ch_2(0),ext_cha(0)! [ 37.423292] WiFi@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(0), prim_ch(4), cen_ch_1(4), cen_ch_2(0)! [ 37.434194] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 37.575505] WiFi@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 [ 37.586709] WiFi@C08L2,ap_link_up() 7142: (caller:wdev_do_linkup+0x20/0x3c [mt_wifi]), wdev(0) [ 37.595358] WiFi@C01L3,wifi_sys_linkup() 1231: wdev idx = 0 [ 37.672108] WiFi@C00L3,wtc_acquire_groupkey_wcid() 81: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1 [ 37.672108] LinkToOmacIdx = 0, LinkToWdevType = 1 [ 37.686465] WiFi@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0 [ 37.699386] WiFi@C08L3,UpdateBeaconHandler() 1911: BCN_UPDATE_INIT, OmacIdx = 0 (ra0) [ 37.707224] WiFi@C08L3,UpdateBeaconHandler() 1924: Band0 BcnInitedRnd = 115 [ 37.714583] WiFi@C00L1,TxCCKStreamCtrl() 20455: set wrong parameters [ 37.733801] PrintSrCmd: [ 37.733801] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 [ 37.733801] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 [ 37.747858] PrintSrCmd: [ 37.747858] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 [ 37.747858] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 37.761848] PrintSrCmd: [ 37.761848] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 [ 37.761848] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 [ 37.775857] PrintSrCmd: [ 37.775857] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 [ 37.775857] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 37.789945] PrintSrCmd: [ 37.789945] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 [ 37.789945] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 37.804034] PrintSrCmd: [ 37.804034] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 [ 37.804034] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 37.818181] WiFi@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 [ 37.829155] WiFi@C03L3,MtCmdTxPwrShowInfo() 13745: ucTxPowerInfoCatg: 2, BandIdx: 0 [ 37.836916] WiFi@C03L3,MtCmdTxPwrShowInfo() 13774: (ret = 0) [ 37.842586] [mtf_txpower_all_rate_info] band_idx:0 pwr:26 ChBand:2G ePAGain:0 [ 37.849760] mtk_ppe_dev_register_hook : ineterface ra0 register (1) [ 38.657496] BcnCheck start after 4000 ms (ra0) [ 38.859701] br0: port 5(ra0) entered blocking state [ 38.864600] br0: port 5(ra0) entered disabled state [ 38.869654] device ra0 entered promiscuous mode [ 38.874262] br0: port 5(ra0) entered blocking state [ 38.879143] br0: port 5(ra0) entered forwarding state [ 38.884250] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [wlanap] is2G_enable= 1, is5G_enable= 1 [wlanap] if_wlan_2G= ra0, if_wlan_5G= rax0 Set multicast_to_unicast kernel option to 1 on interface ra0 /usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument ra0 Channel Value: 4 WLAN Two interface up! [ 38.954896] 7981@C08L2,mbss_virtual_if_open() 133: ===> rax0 [ 38.960778] 7981@C01L2,RTMP_COM_IoctlHandle() 1510: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT [ 38.968871] 7981@C01L2,RTMP_COM_IoctlHandle() 1487: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP [ 38.976878] WiFi@C01L3,wifi_sys_open() 855: wdev idx = 3 [ 38.982449] 7981@C18L3,BuildChannelList() 484: [ 38.986993] 7981@C00L3,BuildChannelList() 512: BandIdx = 1, PhyMode = 177, ChListNum = 4: [ 38.995204] 7981@C23L3,DfsBuildChannelList() 3708: Done [ 39.000444] 7981@C23L3,RadarStateCheck() 243: Zero Wait State: 0 [ 39.006449] 7981@C23L3,RadarStateCheck() 290: RD_NORMAL_MODE [ 39.013238] 7981@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(0), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177! [ 39.024792] phy_freq_adjust : no prim_ch value for adjust! [ 39.030274] 7981@C23L1,operate_loader_phy() 397: phy_freq_adjust failed!WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xa4/0x150 [mt_wifi] [ 39.043691] wdev_attr_update(): wdevId3 = XX:XX:XX:XX:XX:d1 [ 39.049287] WiFi@C12L1,wifi_sys_open() 902: wifi_sys_open():band1 group_idx[3]=4, bw_grp=16 omac=0 [ 39.058298] 7981@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=3 [ 39.065165] 7981@C23L1,HcGetBandByChannel() 1229: No hdev parking on channel:0, just return a default band_idx 0! [ 39.075511] 7981@C02L2,AsicRadioOnOffCtrl() 2338: DbdcIdx=0 RadioOn [ 39.082419] 7981@C00L2,ApAutoChannelAtBootUp() 333: -----------------> [ 39.089077] 7981@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 39.094605] 7981@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 39.100025] 7981@C23L3,AutoChSelBuildChannelListFor56G() 2726: ChListNum56G = 4 [ 39.107339] 7981@C23L3,AutoChSelBuildChannelListFor56G() 2942: ACSChListNum = 4 [ 39.114845] 7981@C08L1,UpdateBeaconHandler() 1890: wdev(3) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x108/0x430 [mt_wifi])!! [ 39.127201] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 39.817820] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 40.321813] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 40.821810] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 41.265494] BcnCheck start after 1500 ms (ra0) [ 41.270276] 7981@C08L1,UpdateBeaconHandler() 1890: wdev(3) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xac/0xd4 [mt_wifi])!! [ 41.317986] 7981@C08L1,UpdateBeaconHandler() 1890: wdev(3) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x25c/0x430 [mt_wifi])!! [ 41.330263] 7981@C23L3,SelectClearChannelBusyTime() 1880: ==================================================================== [ 41.341650] 7981@C23L3,SelectClearChannelBusyTime() 1883: Channel 36 : Busy Time = 338, Skip Channel = FALSE, BwCap = TRUE [ 41.353037] 7981@C23L3,SelectClearChannelBusyTime() 1883: Channel 40 : Busy Time = 291, Skip Channel = FALSE, BwCap = TRUE [ 41.364425] 7981@C23L3,SelectClearChannelBusyTime() 1883: Channel 44 : Busy Time = 3192, Skip Channel = FALSE, BwCap = TRUE [ 41.375813] 7981@C23L3,SelectClearChannelBusyTime() 1883: Channel 48 : Busy Time = 225, Skip Channel = FALSE, BwCap = TRUE [ 41.387197] 7981@C23L3,SelectClearChannelBusyTime() 1889: ==================================================================== [ 41.398587] 7981@C23L3,SelectClearChannelBusyTime() 2124: Rule 3 Channel Busy time value : Select Primary Channel 48 [ 41.409106] 7981@C23L3,SelectClearChannelBusyTime() 2126: Rule 3 Channel Busy time value : Min Channel Busy = 3192 [ 41.419450] 7981@C23L3,SelectClearChannelBusyTime() 2128: Rule 3 Channel Busy time value : BW = 80 [ 41.428403] 7981@C23L3,SelectClearChannelBusyTime() 2166: [SelectClearChannelBusyTime] - band1 END [ 41.437364] 7981@C23L3,RadarStateCheck() 243: Zero Wait State: 0 [ 41.443369] 7981@C23L3,RadarStateCheck() 290: RD_NORMAL_MODE [ 41.450161] 7981@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(48), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177! [ 41.461815] 7981@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(2), prim_ch(48), cen_ch_1(42), cen_ch_2(0),ext_cha(3)! [ 41.473466] 7981@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(2), prim_ch(48), cen_ch_1(42), cen_ch_2(0)! [ 41.484580] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 41.742881] 7981@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 [ 41.753887] 7981@C23L3,DfsBuildChannelList() 3708: Done [ 41.759161] 7981@C23L3,zero_wait_dfs_switch_ch() 924: outband ch 0, ch_stat 0 [ 41.766330] 7981@C23L3,zero_wait_dfs_switch_ch() 931: bDedicatedZeroWaitDefault == 0 [ 41.774318] 7981@C08L2,APStartUpForMbss() 983: ===>(caller:ap_inf_open+0x144/0x4f0 [mt_wifi]), mbss_idx:3, CfgMode:0 [ 41.784943] 7981@C15L2,APPMFInit() 130: [PMF] apidx=3, MFPC=1, MFPR=0, SHA256=0 [ 41.792296] 7981@C18L3,BuildChannelList() 484: [ 41.797061] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] [ 41.804777] WiFi@C08L2,ap_link_up() 7142: (caller:wdev_do_linkup+0x20/0x3c [mt_wifi]), wdev(3) [ 41.813412] 7981@C01L3,wifi_sys_linkup() 1231: wdev idx = 3 [ 41.890312] 7981@C00L3,wtc_acquire_groupkey_wcid() 81: Found a non-occupied wtbl_idx:286 for WDEV_TYPE:1 [ 41.890312] LinkToOmacIdx = 0, LinkToWdevType = 1 [ 41.904674] 7981@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=3 [ 41.917515] 7981@C08L3,UpdateBeaconHandler() 1911: BCN_UPDATE_INIT, OmacIdx = 0 (rax0) [ 41.925495] 7981@C08L3,UpdateBeaconHandler() 1924: Band1 BcnInitedRnd = 156 [ 41.946748] PrintSrCmd: [ 41.946748] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 41.946748] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 [ 41.960758] PrintSrCmd: [ 41.960758] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 41.960758] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 41.974747] PrintSrCmd: [ 41.974747] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 41.974747] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 [ 41.988761] PrintSrCmd: [ 41.988761] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 41.988761] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 42.002844] PrintSrCmd: [ 42.002844] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 42.002844] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 42.016932] PrintSrCmd: [ 42.016932] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 42.016932] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 42.031055] 7981@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 [ 42.042034] 7981@C03L3,MtCmdTxPwrShowInfo() 13745: ucTxPowerInfoCatg: 2, BandIdx: 1 [ 42.049797] 7981@C03L3,MtCmdTxPwrShowInfo() 13774: (ret = 0) [ 42.055471] [mtf_txpower_all_rate_info] band_idx:1 pwr:30 ChBand:5G ePAGain:0 [ 42.062648] mtk_ppe_dev_register_hook : ineterface rax0 register (2) [ 43.072729] br0: port 6(rax0) entered blocking state [ 43.077705] br0: port 6(rax0) entered disabled state [ 43.082833] device rax0 entered promiscuous mode [ 43.087526] br0: port 6(rax0) entered blocking state [ 43.092491] br0: port 6(rax0) entered forwarding state [ 43.114856] 7981@C08L2,mbss_virtual_if_open() 133: ===> rax1 [ 43.120623] 7981@C01L2,RTMP_COM_IoctlHandle() 1510: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT [ 43.128731] 7981@C01L2,RTMP_COM_IoctlHandle() 1487: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP [ 43.136736] WiFi@C01L3,wifi_sys_open() 855: wdev idx = 4 [ 43.142294] 7981@C18L3,BuildChannelList() 484: [ 43.146858] 7981@C23L3,operate_loader_phy() 387: oper_cfg: prim_ch(48), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177! [ 43.158501] 7981@C23L3,operate_loader_phy() 402: oper_dev after adjust: bw(2), prim_ch(48), cen_ch_1(42), cen_ch_2(0),ext_cha(3)! [ 43.170150] 7981@C23L3,operate_loader_phy() 423: oper_radio after decision: bw(2), prim_ch(48), cen_ch_1(42), cen_ch_2(0)! [ 43.181225] 7981@C00L1,mt7981_apply_dpd_flatness_data() 622: eeprom 0x19a bit 0 is 0, do runtime cal [ 43.201511] 7981@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 [ 43.212709] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xa4/0x150 [mt_wifi] [ 43.220737] wdev_attr_update(): wdevId4 = XX:XX:XX:XX:XX:d2 [ 43.226332] WiFi@C12L1,wifi_sys_open() 902: wifi_sys_open():band1 group_idx[4]=25, bw_grp=16 omac=17 [ 43.235495] 7981@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=4 [ 43.242373] 7981@C02L2,AsicRadioOnOffCtrl() 2338: DbdcIdx=1 RadioOn [ 43.249229] 7981@C00L2,ApAutoChannelAtBootUp() 333: -----------------> [ 43.255882] 7981@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 43.261396] 7981@C03L1,MtCmdSetMacTxRx() 10245: (ret = 0) [ 43.266803] 7981@C00L1,ApAutoChannelAtBootUp() 490: zero-wait DFS is not enabled [ 43.274196] 7981@C08L1,ap_run_at_boot() 622: ACS is disable !! [ 43.281006] 7981@C08L2,APStartUpForMbss() 983: ===>(caller:ap_inf_open+0x144/0x4f0 [mt_wifi]), mbss_idx:4, CfgMode:0 [ 43.291573] 7981@C15L2,APPMFInit() 130: [PMF] apidx=4, MFPC=1, MFPR=0, SHA256=0 [ 43.358109] 7981@C18L3,BuildChannelList() 484: [ 43.362871] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] [ 43.370529] WiFi@C08L2,ap_link_up() 7142: (caller:wdev_do_linkup+0x20/0x3c [mt_wifi]), wdev(4) [ 43.379161] 7981@C01L3,wifi_sys_linkup() 1231: wdev idx = 4 [ 43.455978] 7981@C00L3,wtc_acquire_groupkey_wcid() 81: Found a non-occupied wtbl_idx:285 for WDEV_TYPE:1 [ 43.455978] LinkToOmacIdx = 11, LinkToWdevType = 1 [ 43.470439] 7981@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=4 [ 43.484027] 7981@C08L3,UpdateBeaconHandler() 1911: BCN_UPDATE_INIT, OmacIdx = 11 (rax1) [ 43.506070] PrintSrCmd: [ 43.506070] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 43.506070] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 [ 43.520075] PrintSrCmd: [ 43.520075] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 43.520075] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 43.534069] PrintSrCmd: [ 43.534069] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 43.534069] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 [ 43.548066] PrintSrCmd: [ 43.548066] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 43.548066] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 43.562148] PrintSrCmd: [ 43.562148] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 43.562148] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 43.576226] PrintSrCmd: [ 43.576226] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 [ 43.576226] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 [ 43.590320] 7981@C12L1,EDCCAInit() 20989: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0 [ 43.601290] 7981@C03L3,MtCmdTxPwrShowInfo() 13745: ucTxPowerInfoCatg: 2, BandIdx: 1 [ 43.609042] 7981@C03L3,MtCmdTxPwrShowInfo() 13774: (ret = 0) [ 43.609154] [mtf_txpower_all_rate_info] band_idx:1 pwr:30 ChBand:5G ePAGain:0 [ 43.614709] mtk_ppe_dev_register_hook : ineterface rax1 register (3) Set multicast_to_unicast kernel option to 1 on interface ra0 /usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument Set multicast_to_unicast kernel option to 1 on interface rax0 /usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument [ 43.901502] BcnCheck start after 3100 ms (ra0) [ 44.632586] br0: port 7(rax1) entered blocking state [ 44.637567] br0: port 7(rax1) entered disabled state [ 44.642698] device rax1 entered promiscuous mode [ 44.647382] br0: port 7(rax1) entered blocking state [ 44.652348] br0: port 7(rax1) entered forwarding state [wlanap] is2G_enable= 1, is5G_enable= 1 [wlanap] if_wlan_2G= ra0, if_wlan_5G= rax0 Set multicast_to_unicast kernel option to 1 on interface ra0 /usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument Set multicast_to_unicast kernel option to 1 on interface rax0 /usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument Set multicast_to_unicast kernel option to 1 on interface rax1 /usr/bin/lan-mtou-setup: line 18: echo: write error: Invalid argument rax0 Channel Value: 48 nf_handle_macctl_wlanap 2776 iwpriv ra0 set AccessPolicy=0 nf_handle_macctl_wlanap 2793 iwpriv rax0 set AccessPolicy=0 nf_handle_macctl_wlanap 2793 iwpriv rax1 set AccessPolicy=0 Run smp.sh & [ 45.474968] 7981@C08L2,mbss_virtual_if_close() 170: ===> rax1 [ 45.480814] 7981@C01L2,RTMP_COM_IoctlHandle() 1498: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN [ 45.489227] WiFi@C08L2,ap_link_down() 7160: (caller:wdev_do_linkdown+0x20/0x34 [mt_wifi]), wdev(4) [ 45.498482] 7981@C08L1,UpdateBeaconHandler() 1890: wdev(4) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!! [ 45.509891] 7981@C01L3,wifi_sys_linkdown() 1363: wdev idx = 4 [ 45.515889] 7981@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=4 [ 45.525258] WiFi@C01L3,wifi_sys_close() 945: wdev idx = 4 [ 45.530984] 7981@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=4 [ 45.536939] 7981@C01L2,RTMP_COM_IoctlHandle() 1521: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT [ 45.545209] extif_put_dev(rax1) [ 45.548349] mtk_ppe_dev_unregister_hook : ineterface rax1 set null (3) [ 45.556668] br0: port 7(rax1) entered disabled state [ 45.567685] -->mtfwd_init(ver:2.0) [ 45.567720] <-- [ 46.505500] BcnCheck start after 600 ms (ra0) [ 46.597587] nf_unregister_hooks() [fwdd][send_ctrl_msg]net link socket didn't created. [fwdd][send_ctrl_msg]net link socket didn't created. cat: can't open '/etc/map/1905d.cfg': No such file or directory [get_mesh_conf] mesh_dlink_get_mesh_role(), wireless_mode=[0], wireless_mode_n=[0] [vlan] vlan for M30 - v1.1.9 [vlan] vlan Start [vlan] triple play = 0 [vlan] wanNum = 1, lanNum = 4, virturalwanNum = 0 [vlan] wanIndex = 0, lanIndex = 1, virtualwanIndex = 5 [vlan] wan port map: 4 [vlan] i = 0 position = 0 type = 1 portIndex = 4 portLogic = 4 portPhyId = 99 [vlan] i = 0 wanPosition = 0 wanIndex = 99 vwBindWanIndex = -1 [vlan] i = 0 wanMac = xxxxxxxxxxcc [vlan] i = 0 portMac = 000000000000 [vlan] i = 0 wanInterface = eth1 [vlan] i = 0 portInterface = eth1 [vlan] lan port map: 0 1 2 3 -1 [vlan] i = 1 position = 1 type = 2 portIndex = 0 portLogic = 0 portPhyId = 0 [vlan] i = 1 lanIndex = 0 [vlan] i = 1 lanMac = xxxxxxxxxxcd [vlan] i = 1 portMac = 000000000000 [vlan] i = 1 portInterface = eth0 [vlan] i = 1 lanInterface = [vlan] i = 2 position = 2 type = 2 portIndex = 1 portLogic = 1 portPhyId = 1 [vlan] i = 2 lanIndex = 1 [vlan] i = 2 lanMac = ca787deba0cd [vlan] i = 2 portMac = 000000000000 [vlan] i = 2 portInterface = eth0 [vlan] i = 2 lanInterface = [vlan] i = 3 position = 3 type = 2 portIndex = 2 portLogic = 2 portPhyId = 2 [vlan] i = 3 lanIndex = 2 [vlan] i = 3 lanMac = ce787deba0cd [vlan] i = 3 portMac = 000000000000 [vlan] i = 3 portInterface = eth0 [vlan] i = 3 lanInterface = [vlan] i = 4 position = 4 type = 2 portIndex = 3 portLogic = 3 portPhyId = 3 [vlan] i = 4 lanIndex = 3 [vlan] i = 4 lanMac = c2787deba0cd [vlan] i = 4 portMac = 000000000000 [vlan] i = 4 portInterface = eth0 [vlan] i = 4 lanInterface = [vlan] i = 1 lanInterface = lan0 [vlan] i = 2 lanInterface = lan1 [vlan] i = 3 lanInterface = lan2 [vlan] i = 4 lanInterface = lan3 [vlan] Port Map 11110000 [vlan] Complete Cmd [vlan] Vlan Cmd Exit [vlan] vlan End [vlan] vlan for M30 - v1.1.9 [vlan] vlan Start [vlan] triple play = 0 [vlan] wanNum = 1, lanNum = 4, virturalwanNum = 0 [vlan] wanIndex = 0, lanIndex = 1, virtualwanIndex = 5 [vlan] wan port map: 4 [vlan] i = 0 position = 0 type = 1 portIndex = 4 portLogic = 4 portPhyId = 99 [vlan] i = 0 wanPosition = 0 wanIndex = 99 vwBindWanIndex = -1 [vlan] i = 0 wanMac = xxxxxxxxxxcc [vlan] i = 0 portMac = 000000000000 [vlan] i = 0 wanInterface = eth1 [vlan] i = 0 portInterface = eth1 [vlan] lan port map: 0 1 2 3 -1 [vlan] i = 1 position = 1 type = 2 portIndex = 0 portLogic = 0 portPhyId = 0 [vlan] i = 1 lanIndex = 0 [vlan] i = 1 lanMac = xxxxxxxxxxcd [vlan] i = 1 portMac = 000000000000 [vlan] i = 1 portInterface = eth0 [vlan] i = 1 lanInterface = [vlan] i = 2 position = 2 type = 2 portIndex = 1 portLogic = 1 portPhyId = 1 [vlan] i = 2 lanIndex = 1 [vlan] i = 2 lanMac = ca787deba0cd [vlan] i = 2 portMac = 000000000000 [vlan] i = 2 portInterface = eth0 [vlan] i = 2 lanInterface = [vlan] i = 3 position = 3 type = 2 portIndex = 2 portLogic = 2 portPhyId = 2 [vlan] i = 3 lanIndex = 2 [vlan] i = 3 lanMac = ce787deba0cd [vlan] i = 3 portMac = 000000000000 [vlan] i = 3 portInterface = eth0 [vlan] i = 3 lanInterface = [vlan] i = 4 position = 4 type = 2 portIndex = 3 portLogic = 3 portPhyId = 3 [vlan] i = 4 lanIndex = 3 [vlan] i = 4 lanMac = c2787deba0cd [vlan] i = 4 portMac = 000000000000 [vlan] i = 4 portInterface = eth0 [vlan] i = 4 lanInterface = [vlan] i = 1 lanInterface = lan0 [vlan] i = 2 lanInterface = lan1 [vlan] i = 3 lanInterface = lan2 [vlan] i = 4 lanInterface = lan3 [vlan] Port Map 11110000 [vlan] Complete Cmd [vlan] Vlan Cmd Exit [vlan] vlan End Start Spanning Tree Protocol v1.25 Created SM Eventloop successfully M30-A0CD [MEMBER_SM] Loading Configuration : Filepath is: /tmp/emDaemon//easyMesh_LogStateFile.txt Filename with path is /tmp/emDaemon/dlinkEmeshMQTTlogFile.txt handle_nat: nat stop ==NAT Stop wan999 ALL== NAT nat-draft stop rule start Flush ip route cache Add the DROP rules for outgoing packets spi_exception_deinit start spi end clear /usr/bin/spi spi_exception_deinit clear /var/nat/blkwan.wan99.clr clear /var/nat/blkwan_pkts.clr clear /var/nat/blkwan_ftp.clr mmi_nat_stop mmi_nat_start NAT nat-draft stop rule end Force to start schedule without consider the Time Sync status! Start Mini-UPNP !! [V] [start][1530]WirelessRouter Mode [ 47.140133] hook is going to be disabled ! [ 47.147885] hook is going to be enabled ! [ 47.162889] HQoS is going to be disabled ! Start Mini-UPNP !! ==NAT Stop wan999 mupnpd== NAT nat-draft stop rule start NAT nat-draft stop rule end ==NAT Start wan999 mupnpd== NAT nat-draft stop rule start NAT nat-draft stop rule end NAT nat-draft start rule start nat-draft stop_ip_forward start func not 'ALL', return discard_ping start discard_ping end inblkwpkts start inblkwpkts end adjust_mss start adjust_mss end Add temporary fwd_BT rules (check_fwd_recent: 0) Remove temporary fwd_BT rules NAT alg start NAT alg end nat-draft start_ip_forward start func not 'ALL', return stealth-mode start stealth-mode end security_v6 start security_v6 end NAT nat-draft start rule end Error: Cannot delete qdisc with handle of zero. Error: Cannot delete qdisc with handle of zero. switch port=0 egress rate limit off switch port=1 egress rate limit off switch port=2 egress rate limit off switch port=3 egress rate limit off [ 47.484354] HQoS is going to be disabled ! create dhcpd6.leases xxxxxxxxxxxxxxxx Error: Cannot delete qdisc with handle of zero. Error: Cannot delete qdisc with handle of zero. switch port=0 egress rate limit off switch port=1 egress rate limit off switch port=2 egress rate limit off switch port=3 egress rate limit off restart the SIP ALG modules RTNETLINK answers: Address not available RTNETLINK answers: Address not available ## Lunching system normally completed! ##

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.6.41 (roland@Linux) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26971-66177c081f) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Fri Jul 26 11:41:25 2024 [ 0.000000] Machine model: D-Link AQUILA PRO AI M30 A1 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000 [ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000 [ 0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 KiB) nomap non-reusable wmcpu-reserved@47c80000 [ 0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 KiB) nomap non-reusable wo-emi@47d80000 [ 0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 KiB) nomap non-reusable wo-data@47dc0000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff] [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff] [ 0.000000] node 0: [mem 0x0000000043030000-0x0000000047c7ffff] [ 0.000000] node 0: [mem 0x0000000047c80000-0x0000000047ffffff] [ 0.000000] node 0: [mem 0x0000000048000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 18 pages/cpu s34600 r8192 d30936 u73728 [ 0.000000] pcpu-alloc: s34600 r8192 d30936 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 bootpart=ubi0 [ 0.000000] Unknown kernel command line parameters "bootpart=ubi0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB [ 0.000000] software IO TLB: area num 2. [ 0.000000] software IO TLB: mapped [mem 0x000000005f540000-0x000000005f5c0000] (0MB) [ 0.000000] Memory: 496904K/524288K available (8512K kernel code, 894K rwdata, 2504K rodata, 384K init, 287K bss, 27384K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 640 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.008123] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) [ 0.018533] pid_max: default: 32768 minimum: 301 [ 0.026077] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.033431] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.043276] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.049933] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.057689] rcu: Hierarchical SRCU implementation. [ 0.062516] rcu: Max phase no-delay instances is 1000. [ 0.068154] smp: Bringing up secondary CPUs ... [ 0.073083] Detected VIPT I-cache on CPU1 [ 0.073127] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 [ 0.073154] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.073218] smp: Brought up 1 node, 2 CPUs [ 0.094829] SMP: Total of 2 processors activated. [ 0.099551] CPU features: detected: 32-bit EL0 Support [ 0.104709] CPU features: detected: CRC32 instructions [ 0.109898] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.118288] CPU: All CPU(s) started at EL2 [ 0.122401] alternatives: applying system-wide alternatives [ 0.131412] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.141318] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.149385] pinctrl core: initialized pinctrl subsystem [ 0.155479] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.162011] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.169146] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.176944] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.185261] thermal_sys: Registered thermal governor 'fair_share' [ 0.185266] thermal_sys: Registered thermal governor 'bang_bang' [ 0.191386] thermal_sys: Registered thermal governor 'step_wise' [ 0.197429] thermal_sys: Registered thermal governor 'user_space' [ 0.203546] ASID allocator initialised with 65536 entries [ 0.216098] pstore: Using crash dump compression: deflate [ 0.221534] pstore: Registered ramoops as persistent store backend [ 0.227740] ramoops: using 0x10000@0x42ff0000, ecc: 0 [ 0.239638] Modules: 29584 pages in range for non-PLT usage [ 0.239648] Modules: 521104 pages in range for PLT usage [ 0.246369] cryptd: max_cpu_qlen set to 1000 [ 0.258135] SCSI subsystem initialized [ 0.262056] libata version 3.00 loaded. [ 0.267415] clocksource: Switched to clocksource arch_sys_counter [ 0.275854] NET: Registered PF_INET protocol family [ 0.280918] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.289386] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.297797] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.305582] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.313393] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.320744] TCP: Hash tables configured (established 4096 bind 4096) [ 0.327206] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.333796] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.341020] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.346727] PCI: CLS 0 bytes, default 64 [ 0.351972] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.363213] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.369091] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.422037] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.429687] printk: console [ttyS0] disabled [ 0.454350] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud = 2500000) is a ST16650V2 [ 0.463577] printk: console [ttyS0] enabled [ 0.471953] printk: bootconsole [uart8250] disabled [ 0.486315] loop: module loaded [ 0.491384] spi-nand spi0.0: Macronix SPI NAND was found. [ 0.496783] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.505444] Signature found at block 1023 [0x07fe0000] [ 0.510600] NMBM management region starts at block 960 [0x07800000] [ 0.517853] First info table with writecount 0 found in block 960 [ 0.526151] Second info table with writecount 0 found in block 963 [ 0.532341] NMBM has been successfully attached [ 0.537170] 10 fixed-partitions partitions found on MTD device spi0.0 [ 0.543635] Creating 10 MTD partitions on "spi0.0": [ 0.548512] 0x000000000000-0x000000100000 : "BL2" [ 0.554158] 0x000000100000-0x000000180000 : "u-boot-env" [ 0.560159] 0x000000180000-0x000000380000 : "Factory" [ 0.566860] 0x000000380000-0x000000580000 : "FIP" [ 0.572950] 0x000000580000-0x000003780000 : "ubi" [ 0.601201] 0x000003780000-0x000006980000 : "ubi1" [ 0.629855] 0x000006980000-0x0000069c0000 : "Odm" [ 0.635356] 0x0000069c0000-0x000006a40000 : "Config1" [ 0.641145] 0x000006a40000-0x000006ac0000 : "Config2" [ 0.646907] 0x000006ac0000-0x0000074c0000 : "Storage" [ 0.804462] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081480000, irq 75 [ 0.814343] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc081480000, irq 75 [ 0.824052] i2c_dev: i2c /dev entries driver [ 0.830799] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 0.839801] NET: Registered PF_INET6 protocol family [ 0.845738] Segment Routing with IPv6 [ 0.849449] In-situ OAM (IOAM) with IPv6 [ 0.853406] NET: Registered PF_PACKET protocol family [ 0.858647] 8021q: 802.1Q VLAN Support v1.8 [ 0.927279] mt7530-mdio mdio-bus:1f: no interrupt support [ 0.948363] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode [ 0.957341] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 0.966294] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=POLL) [ 0.986810] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=POLL) [ 1.007088] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=POLL) [ 1.027373] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=POLL) [ 1.038967] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode [ 1.045705] DSA: tree 0 setup [ 1.049078] UBI: auto-attach mtd4 [ 1.052399] ubi0: default fastmap pool size: 20 [ 1.056918] ubi0: default fastmap WL pool size: 10 [ 1.061716] ubi0: attaching mtd4 [ 1.203297] ubi0: scanning is finished [ 1.211301] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 17, need 19 [ 1.221797] ubi0: attached mtd4 (name "ubi", size 50 MiB) [ 1.227200] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.234077] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.240858] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.247811] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 [ 1.253804] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 1.261021] ubi0: max/mean erase counter: 104/71, WL threshold: 4096, image sequence number: 1841881750 [ 1.270403] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 17 [ 1.279621] ubi0: background thread "ubi_bgt0d" started, PID 560 [ 1.280973] block ubiblock0_1: created from ubi0:1(rootfs) [ 1.291109] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem [ 1.298161] clk: Disabling unused clocks [ 1.306832] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 1.314135] Freeing unused kernel memory: 384K [ 1.318655] Run /sbin/init as init process [ 1.322741] with arguments: [ 1.325694] /sbin/init [ 1.328399] with environment: [ 1.331526] HOME=/ [ 1.333873] TERM=linux [ 1.336567] bootpart=ubi0 [ 1.519806] init: Console is alive [ 1.523349] init: - watchdog - [ 1.850358] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 1.876160] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 1.885989] Enter gca230718_probe for device address 64 [ 1.891272] Creating LED for node led: reg=0 [ 1.895611] Creating LED for node led: reg=1 [ 1.899961] Creating LED for node led: reg=2 [ 1.904288] Creating LED for node led: reg=3 [ 1.914541] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 1.931753] init: - preinit - [ 2.256994] mtk_soc_eth 15100000.ethernet internet: renamed from eth1 [ 2.291008] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 2.300804] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 2.320345] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode [ 4.443726] UBIFS (ubi0:2): default file-system created [ 4.450681] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 4.456435] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 696 [ 4.497169] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 4.505028] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 4.514932] UBIFS (ubi0:2): FS size: 37711872 bytes (35 MiB, 297 LEBs), max 307 LEBs, journal size 1904640 bytes (1 MiB, 15 LEBs) [ 4.526574] UBIFS (ubi0:2): reserved for root: 1781224 bytes (1739 KiB) [ 4.533179] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 4F25D334-58BF-46CB-A02D-D1CA05EF3B5D, small LPT model [ 4.545768] mount_root: overlay filesystem has not been fully initialized yet [ 4.553198] mount_root: switching to ubifs overlay [ 4.560239] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 4.571945] urandom-seed: Seed file not found (/etc/urandom.seed) [ 4.620187] random: procd: uninitialized urandom read (4 bytes read) [ 4.624006] procd: - early - [ 4.629657] procd: - watchdog - [ 5.187847] procd: - watchdog - [ 5.191409] procd: - ubus - [ 5.887424] random: crng init done [ 5.894200] procd: - init - [ 6.218523] kmodloader: loading kernel modules from /etc/modules.d/* [ 6.240741] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0 [ 6.258398] Loading modules backported from Linux version v6.9.9-0-g28fdf4518483 [ 6.265790] Backport generated by backports.git v6.1.97-1-29-gf1d24a3683b2 [ 6.416501] urngd: v1.0.2 started. [ 6.607806] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221208201745a [ 6.607806] [ 6.774206] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221208201806 [ 6.867772] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221208202048 [ 6.959198] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0' [ 6.967641] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1' [ 7.050563] mtdblock: MTD device 'Odm' is NAND, please consider using UBI block devices instead. [ 7.112881] mtdblock: MTD device 'Odm' is NAND, please consider using UBI block devices instead. [ 9.199535] PPP generic driver version 2.4.2 [ 9.204532] NET: Registered PF_PPPOX protocol family [ 9.212296] kmodloader: done loading kernel modules from /etc/modules.d/* [ 14.548016] mtk_soc_eth 15100000.ethernet eth0: Link is Down [ 14.569472] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 14.578277] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 14.593896] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode [ 14.602974] br-lan: port 1(lan1) entered blocking state [ 14.608267] br-lan: port 1(lan1) entered disabled state [ 14.613518] mt7530-mdio mdio-bus:1f lan1: entered allmulticast mode [ 14.619803] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode [ 14.629492] mt7530-mdio mdio-bus:1f lan1: entered promiscuous mode [ 14.656929] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode [ 14.689000] br-lan: port 2(lan2) entered blocking state [ 14.694234] br-lan: port 2(lan2) entered disabled state [ 14.699573] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode [ 14.707805] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode [ 14.723752] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode [ 14.734875] br-lan: port 3(lan3) entered blocking state [ 14.740164] br-lan: port 3(lan3) entered disabled state [ 14.745415] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode [ 14.754700] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode [ 14.771957] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode [ 14.783266] br-lan: port 4(lan4) entered blocking state [ 14.788545] br-lan: port 4(lan4) entered disabled state [ 14.793800] mt7530-mdio mdio-bus:1f lan4: entered allmulticast mode [ 14.802268] mt7530-mdio mdio-bus:1f lan4: entered promiscuous mode [ 14.836030] mtk_soc_eth 15100000.ethernet internet: PHY [mdio-bus:00] driver [MediaTek MT7981 PHY] (irq=POLL) [ 14.845993] mtk_soc_eth 15100000.ethernet internet: configuring for phy/gmii link mode [ 14.856104] mtk_soc_eth 15100000.ethernet internet: Link is Up - 1Gbps/Full - flow control off [ 19.972473] mt7530-mdio mdio-bus:1f lan4: Link is Up - 1Gbps/Full - flow control rx/tx [ 19.980461] br-lan: port 4(lan4) entered blocking state [ 19.985680] br-lan: port 4(lan4) entered forwarding state

Space for additional notes, links to forum threads or other resources.

...

Add tags below, then remove this fixme.

How to add tags

EXAMPLETAG

D-Link AQUILA PRO AI M30 A1

Getting started with a new Device Page

Keep the articles modular

Supported Versions

Experimental Versions

Hardware Highlights

Installation

Flash Layout

OEM easy installation

Recovering when OEM firmware < 1.10.02 was installed previously

Recovering when OEM firmware >= 1.10.02 was installed previously

OEM installation using the TFTP method

Specific values needed for tftp

Upgrading OpenWrt

Debricking

Failsafe mode

Basic configuration

Specific Configuration

Network interfaces

Switch Ports (for VLANs)

Buttons

Hardware

Info

Photos

Opening the case

Serial

JTAG

Bootloader mods

Hardware mods

Bootlogs

OEM bootlog

OpenWrt bootlog

Notes

Tags