ASUS ZenWiFi BT8

U-Boot 2024.04 (May 30 2024 - 18:58:13 +0800) MT7988> setenv bootcmd 'mmc read 0x40000000 0x00004400 0x0010000; fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 0x40000000'; MT7988> saveenv Saving Environment to MTD... Erasing on MTD device 'spi-nand0'... OK Writing to MTD device 'spi-nand0'... OK OK MT7988> setenv serverip 192.168.1.22; setenv ipaddr 192.168.1.1; MT7988> tftpboot 0x46000000 smartrg.bin; fdt addr $(fdtcontroladdr); switch prereq:0 Using ethernet@15100000 device TFTP from server 192.168.1.22; our IP address is 192.168.1.1 Filename 'smartrg.bin'. Load address: 0x46000000 Loading: Got ARP REPLY, set eth addr (00:e0:4c:68:00:e1) ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################### 15.8 MiB/s done Bytes transferred = 11769920 (b39840 hex) Working FDT set to 7f7fd2f0 MT7988> fdt rm /signature; bootm libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND ## Loading kernel from FIT Image at 46000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-6.6.67 Type: Kernel Image Compression: lzma compressed Data Start: 0x460000e8 Data Size: 4113579 Bytes = 3.9 MiB Architecture: AArch64 OS: Linux Load Address: 0x48000000 Entry Point: 0x48000000 Hash algo: crc32 Hash value: 67861de8 Hash algo: sha1 Hash value: 170f33f279d3ea8983fbf326c8f7869084fe5048 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading ramdisk from FIT Image at 46000000 ... Using 'config-1' configuration Trying 'initrd-1' ramdisk subimage Description: ARM64 OpenWrt smartrg_sdg-8734 initrd Type: RAMDisk Image Compression: uncompressed Data Start: 0x463ec6d0 Data Size: 7606712 Bytes = 7.3 MiB Architecture: AArch64 OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: crc32 Hash value: 38738737 Hash algo: sha1 Hash value: 1c4065ac2a202262ba85c567b833465defc04478 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 46000000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt smartrg_sdg-8734 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x46b2d994 Data Size: 47473 Bytes = 46.4 KiB Architecture: AArch64 Hash algo: crc32 Hash value: d18d4271 Hash algo: sha1 Hash value: 60be69632dc645c95ed3231caafebdf09feb361d Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x46b2d994 Working FDT set to 46b2d994 Uncompressing Kernel Image to 48000000 Loading Ramdisk to 7f0b7000, end 7f7f81b8 ... OK Loading Device Tree to 000000007f0a8000, end 000000007f0b6970 ... OK Working FDT set to 7f0a8000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd090] [ 0.000000] Linux version 6.6.67 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28211-d55754ce0d) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Mon Dec 23 00:55:35 2024 [ 0.000000] Machine model: SmartRG SDG-8734 [ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004304ffff (320 KiB) nomap non-reusable secmon@43000000 [ 0.000000] OF: reserved mem: 0x0000000045000000..0x0000000045000fff (4 KiB) nomap non-reusable bootdata@45000000 [ 0.000000] OF: reserved mem: 0x0000000045001000..0x0000000045140fff (1280 KiB) nomap non-reusable ramoops@45001000 [ 0.000000] OF: reserved mem: 0x0000000047cc0000..0x0000000047dbffff (1024 KiB) nomap non-reusable wmcpu-reserved@47cc0000 [ 0.000000] OF: reserved mem: 0x000000004f600000..0x000000004f63ffff (256 KiB) nomap non-reusable wo-emi@4f600000 [ 0.000000] OF: reserved mem: 0x000000004f640000..0x000000004f67ffff (256 KiB) nomap non-reusable wo-emi@4f640000 [ 0.000000] OF: reserved mem: 0x000000004f680000..0x000000004f6bffff (256 KiB) nomap non-reusable wo-emi@4f680000 [ 0.000000] OF: reserved mem: 0x000000004f700000..0x000000004fefffff (8192 KiB) nomap non-reusable wo-data@4f700000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff] [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004304ffff] [ 0.000000] node 0: [mem 0x0000000043050000-0x0000000044ffffff] [ 0.000000] node 0: [mem 0x0000000045000000-0x0000000045140fff] [ 0.000000] node 0: [mem 0x0000000045141000-0x0000000047cbffff] [ 0.000000] node 0: [mem 0x0000000047cc0000-0x0000000047dbffff] [ 0.000000] node 0: [mem 0x0000000047dc0000-0x000000004f5fffff] [ 0.000000] node 0: [mem 0x000000004f600000-0x000000004f6bffff] [ 0.000000] node 0: [mem 0x000000004f6c0000-0x000000004f6fffff] [ 0.000000] node 0: [mem 0x000000004f700000-0x000000004fefffff] [ 0.000000] node 0: [mem 0x000000004ff00000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728 [ 0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: rootfstype=squashfs ubi.mtd=UBI_DEV console=ttyS0,115200n1 loglevel=8 pci=pcie_bus_perf root=PARTLABEL=rootfs root=/dev/mtdblock4 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x000000007fae4000-0x000000007fbe4000] (1MB) [ 0.000000] Memory: 995348K/1048576K available (9024K kernel code, 996K rwdata, 1668K rodata, 448K init, 307K bss, 53228K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 416 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: 0xffffffc080010080 [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.000067] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) [ 0.000073] pid_max: default: 32768 minimum: 301 [ 0.002145] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002152] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.003661] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.003952] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.004035] rcu: Hierarchical SRCU implementation. [ 0.004037] rcu: Max phase no-delay instances is 1000. [ 0.004346] smp: Bringing up secondary CPUs ... [ 0.004564] Detected VIPT I-cache on CPU1 [ 0.004599] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 [ 0.004621] CPU1: Booted secondary processor 0x0000000001 [0x411fd090] [ 0.004873] Detected VIPT I-cache on CPU2 [ 0.004893] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000 [ 0.004903] CPU2: Booted secondary processor 0x0000000002 [0x411fd090] [ 5.040598] CPU3: failed to come online [ 5.040600] CPU3: failed in unknown state : 0x0 [ 5.040621] smp: Brought up 1 node, 3 CPUs [ 5.040624] SMP: Total of 3 processors activated. [ 5.040627] CPU features: detected: 32-bit EL0 Support [ 5.040629] CPU features: detected: CRC32 instructions [ 5.040646] spectre-bhb mitigation disabled by compile time option [ 5.040658] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 5.040662] CPU: All CPU(s) started at EL2 [ 5.040663] alternatives: applying system-wide alternatives [ 5.044205] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 5.044216] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 5.045169] pinctrl core: initialized pinctrl subsystem [ 5.045925] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 5.046252] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 5.046286] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 5.046314] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 5.046598] thermal_sys: Registered thermal governor 'fair_share' [ 5.046600] thermal_sys: Registered thermal governor 'bang_bang' [ 5.046602] thermal_sys: Registered thermal governor 'step_wise' [ 5.046604] thermal_sys: Registered thermal governor 'user_space' [ 5.046652] ASID allocator initialised with 65536 entries [ 5.047420] pstore: Using crash dump compression: deflate [ 5.047425] printk: console [ramoops-1] enabled [ 5.047678] pstore: Registered ramoops as persistent store backend [ 5.047682] ramoops: using 0x140000@0x45001000, ecc: 0 [ 5.049574] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000 [ 5.055299] Modules: 29616 pages in range for non-PLT usage [ 5.055307] Modules: 521136 pages in range for PLT usage [ 5.056164] cryptd: max_cpu_qlen set to 1000 [ 5.056993] SCSI subsystem initialized [ 5.057057] libata version 3.00 loaded. [ 5.057975] clocksource: Switched to clocksource arch_sys_counter [ 5.059624] NET: Registered PF_INET protocol family [ 5.059718] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 5.061013] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 5.061027] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 5.061036] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 5.061067] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 5.061184] TCP: Hash tables configured (established 8192 bind 8192) [ 5.061446] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear) [ 5.061523] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 5.061541] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 5.061782] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 5.061810] PCI: CLS 0 bytes, default 64 [ 5.061931] Unpacking initramfs... [ 5.062707] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 5.066534] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.066553] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.087238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 5.088489] mtk-xsphy soc:xphy@11e10000: failed to get ref_clk(id-1) [ 5.088971] gpio-export gpio-export: 6 gpio(s) exported [ 5.089436] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges: [ 5.089453] mtk-pcie-gen3 11300000.pcie: Parsing ranges property... [ 5.089467] mtk-pcie-gen3 11300000.pcie: IO 0x0030000000..0x00301fffff -> 0x0030000000 [ 5.089480] mtk-pcie-gen3 11300000.pcie: MEM 0x0030200000..0x0037ffffff -> 0x0030200000 [ 5.089508] /soc/pcie@11300000: Failed to get clk index: 0 ret: -517 [ 5.089517] mtk-pcie-gen3 11300000.pcie: failed to get clocks [ 5.089611] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges: [ 5.089621] mtk-pcie-gen3 11310000.pcie: Parsing ranges property... [ 5.089631] mtk-pcie-gen3 11310000.pcie: IO 0x0038000000..0x00381fffff -> 0x0038000000 [ 5.089641] mtk-pcie-gen3 11310000.pcie: MEM 0x0038200000..0x003fffffff -> 0x0038200000 [ 5.089664] /soc/pcie@11310000: Failed to get clk index: 0 ret: -517 [ 5.089673] mtk-pcie-gen3 11310000.pcie: failed to get clocks [ 5.094126] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 5.096385] printk: console [ttyS0] disabled [ 5.116705] 11000000.serial: ttyS0 at MMIO 0x11000000 (irq = 99, base_baud = 2500000) is a ST16650V2 [ 5.116754] printk: console [ttyS0] enabled [ 5.959797] Freeing initrd memory: 7428K [ 5.984417] 11000100.serial: ttyS1 at MMIO 0x11000100 (irq = 100, base_baud = 2500000) is a ST16650V2 [ 6.111468] 11000200.serial: ttyS2 at MMIO 0x11000200 (irq = 101, base_baud = 2500000) is a ST16650V2 [ 6.123403] loop: module loaded [ 6.259679] i2c_dev: i2c /dev entries driver [ 6.264496] /soc/i2c@11003000/rt5190a@64: Fixed dependency cycle(s) with /soc/i2c@11003000/rt5190a@64/regulators/buck1 [ 6.277855] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 6.285970] mtk-cpufreq mtk-cpufreq: failed to initialize dvfs info for cpu0 [ 6.416983] mmc0: Failed to initialize a non-removable card [ 18.728031] leds white: Setting an LED's brightness failed (-110) [ 20.808031] leds blue: Setting an LED's brightness failed (-110) [ 22.888031] leds green: Setting an LED's brightness failed (-110) [ 24.968031] leds red: Setting an LED's brightness failed (-110) [ 24.973972] srg-sysled: probe of 1-0030 failed with error -110 [ 24.980521] NET: Registered PF_INET6 protocol family [ 24.986047] Segment Routing with IPv6 [ 24.989723] In-situ OAM (IOAM) with IPv6 [ 24.993670] NET: Registered PF_PACKET protocol family [ 24.998726] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 25.011742] 8021q: 802.1Q VLAN Support v1.8 [ 25.030257] phy phy-soc:xphy@11e10000.3: type_sw - reg 0x218, index 0 [ 25.037500] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges: [ 25.044828] mtk-pcie-gen3 11300000.pcie: Parsing ranges property... [ 25.051112] mtk-pcie-gen3 11300000.pcie: IO 0x0030000000..0x00301fffff -> 0x0030000000 [ 25.059557] mtk-pcie-gen3 11300000.pcie: MEM 0x0030200000..0x0037ffffff -> 0x0030200000 [ 25.314040] mtk-pcie-gen3 11300000.pcie: set IO trans window[0]: cpu_addr = 0x30000000, pci_addr = 0x30000000, size = 0x200000 [ 25.325438] mtk-pcie-gen3 11300000.pcie: set MEM trans window[1]: cpu_addr = 0x30200000, pci_addr = 0x30200000, size = 0x200000 [ 25.336904] mtk-pcie-gen3 11300000.pcie: set MEM trans window[2]: cpu_addr = 0x30400000, pci_addr = 0x30400000, size = 0x400000 [ 25.348368] mtk-pcie-gen3 11300000.pcie: set MEM trans window[3]: cpu_addr = 0x30800000, pci_addr = 0x30800000, size = 0x800000 [ 25.359831] mtk-pcie-gen3 11300000.pcie: set MEM trans window[4]: cpu_addr = 0x31000000, pci_addr = 0x31000000, size = 0x1000000 [ 25.371381] mtk-pcie-gen3 11300000.pcie: set MEM trans window[5]: cpu_addr = 0x32000000, pci_addr = 0x32000000, size = 0x2000000 [ 25.382931] mtk-pcie-gen3 11300000.pcie: set MEM trans window[6]: cpu_addr = 0x34000000, pci_addr = 0x34000000, size = 0x4000000 [ 25.394791] mtk-pcie-gen3 11300000.pcie: PCI host bridge to bus 0000:00 [ 25.401410] pci_bus 0000:00: root bus resource [bus 00-ff] [ 25.406888] pci_bus 0000:00: root bus resource [io 0x0000-0x1fffff] (bus address [0x30000000-0x301fffff]) [ 25.416530] pci_bus 0000:00: root bus resource [mem 0x30200000-0x37ffffff] [ 25.423396] pci_bus 0000:00: scanning bus [ 25.427417] pci 0000:00:00.0: [14c3:7988] type 01 class 0x060400 [ 25.433427] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] [ 25.440271] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 25.446355] pci 0000:00:00.0: PME# disabled [ 25.451980] pci_bus 0000:00: fixups for bus [ 25.456156] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0 [ 25.462850] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 25.470849] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1 [ 25.477593] pci_bus 0000:01: scanning bus [ 25.481617] pci 0000:01:00.0: [14c3:7990] type 00 class 0x028000 [ 25.487634] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit pref] [ 25.494862] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00007fff 64bit] [ 25.501748] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 25.507833] pci 0000:01:00.0: PME# disabled [ 25.538009] pci_bus 0000:01: fixups for bus [ 25.542184] pci_bus 0000:01: bus scan returning with max=01 [ 25.547746] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 25.554358] pci_bus 0000:00: bus scan returning with max=01 [ 25.559935] pci 0000:00:00.0: BAR 9: assigned [mem 0x30200000-0x303fffff 64bit pref] [ 25.567666] pci 0000:00:00.0: BAR 8: assigned [mem 0x30400000-0x304fffff] [ 25.574445] pci 0000:00:00.0: BAR 0: assigned [mem 0x30500000-0x30507fff 64bit] [ 25.581751] pci 0000:01:00.0: BAR 0: assigned [mem 0x30200000-0x303fffff 64bit pref] [ 25.589493] pci 0000:01:00.0: BAR 2: assigned [mem 0x30400000-0x30407fff 64bit] [ 25.596799] pci 0000:00:00.0: PCI bridge to [bus 01] [ 25.601757] pci 0000:00:00.0: bridge window [mem 0x30400000-0x304fffff] [ 25.608536] pci 0000:00:00.0: bridge window [mem 0x30200000-0x303fffff 64bit pref] [ 25.616275] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 25.624717] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 25.633255] pcieport 0000:00:00.0: assign IRQ: got 114 [ 25.638391] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 25.644481] pcieport 0000:00:00.0: enabling bus mastering [ 25.650270] mtk-pcie-gen3 11300000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11300c00 data 0 [ 25.658706] mtk-pcie-gen3 11300000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11300c00 data 1 [ 25.667131] mtk-pcie-gen3 11300000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11300c00 data 2 [ 25.675557] mtk-pcie-gen3 11300000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11300c00 data 3 [ 25.683983] mtk-pcie-gen3 11300000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11300c00 data 4 [ 25.692409] mtk-pcie-gen3 11300000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11300c00 data 5 [ 25.700835] mtk-pcie-gen3 11300000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11300c00 data 6 [ 25.709261] mtk-pcie-gen3 11300000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11300c00 data 7 [ 25.717685] mtk-pcie-gen3 11300000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11300c00 data 8 [ 25.726113] mtk-pcie-gen3 11300000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11300c00 data 9 [ 25.734539] mtk-pcie-gen3 11300000.pcie: msi#0xa address_hi 0x0 address_lo 0x11300c00 data 10 [ 25.743053] mtk-pcie-gen3 11300000.pcie: msi#0xb address_hi 0x0 address_lo 0x11300c00 data 11 [ 25.751566] mtk-pcie-gen3 11300000.pcie: msi#0xc address_hi 0x0 address_lo 0x11300c00 data 12 [ 25.760079] mtk-pcie-gen3 11300000.pcie: msi#0xd address_hi 0x0 address_lo 0x11300c00 data 13 [ 25.768591] mtk-pcie-gen3 11300000.pcie: msi#0xe address_hi 0x0 address_lo 0x11300c00 data 14 [ 25.777102] mtk-pcie-gen3 11300000.pcie: msi#0xf address_hi 0x0 address_lo 0x11300c00 data 15 [ 25.785615] mtk-pcie-gen3 11300000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11300c00 data 16 [ 25.794214] mtk-pcie-gen3 11300000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11300c00 data 17 [ 25.802813] mtk-pcie-gen3 11300000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11300c00 data 18 [ 25.811415] mtk-pcie-gen3 11300000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11300c00 data 19 [ 25.820015] mtk-pcie-gen3 11300000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11300c00 data 20 [ 25.828615] mtk-pcie-gen3 11300000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11300c00 data 21 [ 25.837212] mtk-pcie-gen3 11300000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11300c00 data 22 [ 25.845812] mtk-pcie-gen3 11300000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11300c00 data 23 [ 25.854412] mtk-pcie-gen3 11300000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11300c00 data 24 [ 25.863011] mtk-pcie-gen3 11300000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11300c00 data 25 [ 25.871610] mtk-pcie-gen3 11300000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11300c00 data 26 [ 25.880209] mtk-pcie-gen3 11300000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11300c00 data 27 [ 25.888809] mtk-pcie-gen3 11300000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11300c00 data 28 [ 25.897406] mtk-pcie-gen3 11300000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11300c00 data 29 [ 25.906007] mtk-pcie-gen3 11300000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11300c00 data 30 [ 25.914607] mtk-pcie-gen3 11300000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11300c00 data 31 [ 25.923645] mtk-pcie-gen3 11300000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11300c00 data 0 [ 25.932150] pcieport 0000:00:00.0: PME: Signaling with IRQ 115 [ 25.938113] pcieport 0000:00:00.0: AER: enabled with IRQ 115 [ 25.943808] pcieport 0000:00:00.0: save config 0x00: 0x798814c3 [ 25.949733] pcieport 0000:00:00.0: save config 0x04: 0x00100406 [ 25.955643] pcieport 0000:00:00.0: save config 0x08: 0x06040001 [ 25.961554] pcieport 0000:00:00.0: save config 0x0c: 0x00010000 [ 25.967462] pcieport 0000:00:00.0: save config 0x10: 0x30500004 [ 25.973376] pcieport 0000:00:00.0: save config 0x14: 0x00000000 [ 25.979288] pcieport 0000:00:00.0: save config 0x18: 0x00010100 [ 25.985196] pcieport 0000:00:00.0: save config 0x1c: 0x000001f1 [ 25.991107] pcieport 0000:00:00.0: save config 0x20: 0x30403040 [ 25.997014] pcieport 0000:00:00.0: save config 0x24: 0x30313021 [ 26.002925] pcieport 0000:00:00.0: save config 0x28: 0x00000000 [ 26.008836] pcieport 0000:00:00.0: save config 0x2c: 0x00000000 [ 26.014743] pcieport 0000:00:00.0: save config 0x30: 0x00000000 [ 26.020656] pcieport 0000:00:00.0: save config 0x34: 0x00000080 [ 26.026564] pcieport 0000:00:00.0: save config 0x38: 0x00000000 [ 26.032474] pcieport 0000:00:00.0: save config 0x3c: 0x00020172 [ 26.038782] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges: [ 26.046089] mtk-pcie-gen3 11310000.pcie: Parsing ranges property... [ 26.052360] mtk-pcie-gen3 11310000.pcie: IO 0x0038000000..0x00381fffff -> 0x0038000000 [ 26.060794] mtk-pcie-gen3 11310000.pcie: MEM 0x0038200000..0x003fffffff -> 0x0038200000 [ 26.407994] mtk-pcie-gen3 11310000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0) [ 26.416780] mtk-pcie-gen3: probe of 11310000.pcie failed with error -110 [ 26.809856] UBI error: cannot open mtd UBI_DEV, error -2 [ 26.815250] clk: Disabling unused clocks [ 26.819923] Freeing unused kernel memory: 448K [ 26.824399] Run /init as init process [ 26.828058] with arguments: [ 26.831013] /init [ 26.833275] with environment: [ 26.836404] HOME=/ [ 26.838756] TERM=linux [ 26.959617] init: Console is alive [ 26.963098] init: - watchdog - [ 26.969462] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 26.980497] usbcore: registered new interface driver usbfs [ 26.986012] usbcore: registered new interface driver hub [ 26.991467] usbcore: registered new device driver usb [ 26.996953] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 27.006904] xhci-mtk 11190000.usb: supply vbus not found, using dummy regulator [ 27.014311] xhci-mtk 11190000.usb: supply vusb33 not found, using dummy regulator [ 27.022352] xhci-mtk 11190000.usb: xHCI Host Controller [ 27.027583] xhci-mtk 11190000.usb: new USB bus registered, assigned bus number 1 [ 27.055046] xhci-mtk 11190000.usb: clocks are not stable (0x3d0f) [ 27.061135] xhci-mtk 11190000.usb: can't setup: -110 [ 27.066091] xhci-mtk 11190000.usb: USB bus 1 deregistered [ 27.071516] xhci-mtk: probe of 11190000.usb failed with error -110 [ 27.077870] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator [ 27.085224] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator [ 27.093074] xhci-mtk 11200000.usb: xHCI Host Controller [ 27.098306] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1 [ 27.108739] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010 [ 27.117889] xhci-mtk 11200000.usb: irq 117, io mem 0x11200000 [ 27.123703] xhci-mtk 11200000.usb: xHCI Host Controller [ 27.128934] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2 [ 27.136323] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 27.143659] hub 1-0:1.0: USB hub found [ 27.147422] hub 1-0:1.0: 1 port detected [ 27.151529] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 27.159810] hub 2-0:1.0: USB hub found [ 27.163567] hub 2-0:1.0: 1 port detected [ 27.169552] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 27.178919] init: - preinit - ip: SIOCGIFFLAGS: No such device Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 31.291593] random: procd: uninitialized urandom read (4 bytes read) [ 31.293043] procd: - early - [ 31.300906] procd: - watchdog - [ 31.815798] procd: - watchdog - [ 31.819065] procd: - ubus - [ 37.778499] platform 15020000.switch: deferred probe pending [ 37.784162] platform 15100000.ethernet: deferred probe pending [ 39.697977] random: crng init done [ 39.702989] procd: - init - Please press Enter to activate this console. [ 39.797868] kmodloader: loading kernel modules from /etc/modules.d/* [ 39.809680] crypto-safexcel 15600000.crypto: can't request region for resource [mem 0x15600000-0x1577ffff] [ 39.819366] crypto-safexcel 15600000.crypto: failed to get resource [ 39.825621] crypto-safexcel: probe of 15600000.crypto failed with error -16 [ 39.833685] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b [ 39.841174] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942 [ 39.864852] mt7996e 0000:01:00.0: assign IRQ: got 114 [ 39.869955] mt7996e 0000:01:00.0: enabling device (0000 -> 0002) [ 39.875978] mt7996e 0000:01:00.0: enabling bus mastering [ 39.880006] urngd: v1.0.2 started. [ 39.958052] mtk-pcie-gen3 11300000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11300c00 data 1 [ 39.988118] mt7996e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240809121758a [ 39.988118] [ 40.010696] mt7996e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20240809121753 [ 40.047042] mt7996e 0000:01:00.0: DSP Firmware Version: ____000000, Build Time: 20240809121650 [ 40.064828] mt7996e 0000:01:00.0: WA Firmware Version: ____000000, Build Time: 20240809121718 [ 40.323352] mt7996e 0000:01:00.0: eeprom load fail, use default bin [ 40.344772] PPP generic driver version 2.4.2 [ 40.349627] NET: Registered PF_PPPOX protocol family [ 40.355988] kmodloader: done loading kernel modules from /etc/modules.d/* [ 60.647985] mt7996e 0000:01:00.0: Message 0012002d (seq 6) timeout

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING