ALFA Network R36A
Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.
Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.
Getting started with a new Device Page
- This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
- There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
- When there are no more “fixme” tags left, delete this one too, along with the
<WRAP>that encloses it.
Keep the articles modular
- Please include only model specific information, omit bla,bla and put everything generic into separate articles
- If you have no time to write certain stuff, link to docs
- base-system should lead the way, do not explain this again
- DO NOT provide a complete howto here! Instead groom the general documentation.
Supported Versions
Hardware Highlights
Installation
→ Install OpenWrt (generic explanation)
You can use sysupgrade image directly in vendor firmware which is based on LEDE/OpenWrt.
Alternatively, you can use web recovery mode in U-Boot:
- Configure PC with static IP 192.168.1.2/24.
- Connect PC with one of RJ45 ports.
- Press the reset button and keep it pressed
- Power up device
- Wait for first blink of all LEDs (indicates network setup)
- Wait for 3 following blinks (approx 3 seconds), then release the reset button.
- Open 192.168.1.1 address in your browser and upload sysupgrade image.
Flash Layout
| Layer0 | raw flash (16 MB Macronix MX25L128) | ||||
|---|---|---|---|---|---|
| Layer1 | u-boot 384 kB | u-boot-env 64 kB | art 64 kB | firmware 15872 kB | |
| Layer2 | kernel 1600 kB | rootfs 14272 kB mounted: “ /”, OverlayFS with /overlay |
|||
OEM easy installation
The instructions below are for Broadcom devices and only serve as an example.
Remove / modify them if they do not apply to this particular device!
This section deals with
- How you install OpenWrt from a device freshly opened
- The steps required such as reset to factory defaults if the device has already been configured
Note: Reset router to factory defaults if it has been previously configured.
- Browse to
http://192.168.1.1/Upgrade.asp - Upload .bin file to router
- Wait for it to reboot
- Telnet to 192.168.1.1 and set a root password, or browse to
http://192.168.1.1if LuCI is installed.
OEM installation using the TFTP method
Specific values needed for tftp
Enter values for “FILL-IN” below
| Bootloader tftp server IPv4 address | FILL-IN |
|---|---|
| Bootloader MAC address (special) | FILL-IN |
| Firmware tftp image | Latest OpenWrt release (NOTE: Name must contain “tftp”) |
| TFTP transfer window | FILL-IN seconds |
| TFTP window start | approximately FILL-IN seconds after power on |
| TFTP client required IP address | FILL-IN |
Upgrading OpenWrt
These are generic instructions. Update with your router's specifics.
LuCI Web Upgrade Process
- Browse to
http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/LuCI Upgrade URL - Upload image file for sysupgrade to LuCI
- Wait for reboot
Terminal Upgrade Process
If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:
sysupgrademtd
Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
sysupgrade
- Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc sysupgrade /tmp/xxx.abc
mtd
If sysupgrade does not support this router, use mtd.
- Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc mtd write /tmp/xxx.abc linux && reboot
Debricking
Failsafe mode
Basic configuration
→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.
Specific Configuration
Please fill in real values for this device, then remove the EXAMPLEs
Network interfaces
The default network configuration is:
| Interface Name | Description | Default configuration |
|---|---|---|
| br-lan | EXAMPLE LAN & WiFi | EXAMPLE 192.168.1.1/24 |
| vlan0 (eth0.0) | EXAMPLE LAN ports (1 to 4) | EXAMPLE None |
| vlan1 (eth0.1) | EXAMPLE WAN port | EXAMPLE DHCP |
| wl0 | EXAMPLE WiFi | EXAMPLE Disabled |
Switch Ports (for VLANs)
Please fill in real values for this device, then remove the EXAMPLEs
Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.
| Port | Switch port |
|---|---|
| Internet (WAN) | EXAMPLE 4 |
| LAN 1 | EXAMPLE 3 |
| LAN 2 | EXAMPLE 2 |
| LAN 3 | EXAMPLE 1 |
| LAN 4 | EXAMPLE 0 |
Buttons
→ hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.
Please fill in real values for this device, then remove the EXAMPLEs
The ALFA Network R36A has the following buttons:
| BUTTON | Event |
|---|---|
| EXAMPLE Reset | reset |
| EXAMPLE Secure Easy Setup | ses |
| EXAMPLE No buttons at all. | - |
Hardware
Info
Photos
Front:
Insert photo of front of the casing
Back:
Insert photo of back of the casing
Backside label:
Insert photo of backside label
Opening the case
Note: This will void your warranty!
Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...
- To remove the cover and open the device, do a/b/c
Main PCB:
Insert photo of PCB
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port
Replace EXAMPLE by real values.
| Serial connection parameters for ALFA Network R36A | EXAMPLE 115200, 8N1 |
|---|
JTAG
→ port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port
Bootlogs
*************************************** * U-Boot 1.1.4-8b5b9e8c-clean * * Build: 2017-09-07 * *************************************** ** Warning: bad env CRC, using default, use 'saveenv' to save it in FLASH BOARD: ALFA R36A - HW_R0C SOC: QCA953x ver. 2 rev. 0 CPU: MIPS 24Kc RAM: 128 MB DDR2 16-bit CL3-4-4-10 FLASH: 16 MB Macronix MX25L128 MAC: 00:C0:CA:A9:47:80 CLOCKS: CPU/RAM/AHB/SPI/REF 650/400/200/ 25/ 25 MHz Hit ESC key to stop booting: 1 0 Booting image from 0x9F080000... Image name: MIPS LEDE Linux-4.4.92 Build date: 2017-10-17 17:46:20 UTC Architecture: MIPS OS/image type: Linux Kernel Compression: LZMA Data size: 1.2 MB (1231868 bytes) Load address: 0x80060000 Entry point: 0x80060000 Header CRC... OK! Data CRC... skipped Stopping network... OK! Uncompressing Kernel... OK! Starting kernel... Linux version 4.4.92 (mini@swbuild.alfacloud.tk) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3560-79f57e422d) ) #0 Tue Oct 17 17:46:20 2017 bootconsole [early0] enabled CPU0 revision is: 00019374 (MIPS 24Kc) SoC: Qualcomm Atheros QCA9533 ver 2 rev 0 Determined physical RAM map: memory: 08000000 @ 00000000 (usable) Initrd not found or empty - disabling initrd No valid device tree found, continuing without Zone ranges: Normal [mem 0x0000000000000000-0x0000000007ffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x0000000007ffffff] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: board=ALFA-R36A mtdparts=spi0.0:448k(u-boot),64k(art)ro,-(firmware) console=ttyS0,115200 profile=R36A country=GB rootfstype=squashfs,jffs2 noinitrd PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Writing ErrCtl register=00000000 Readback ErrCtl register=00000000 Memory: 125472K/131072K available (2802K kernel code, 126K rwdata, 716K rodata, 188K init, 191K bss, 5600K reserved, 0K cma-reserved) SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:51 Clocks: CPU:650.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes) NET: Registered protocol family 16 MIPS: machine is ALFA Network R36A ar724x-pci ar724x-pci.0: PCIe link is down registering PCI controller with io_map_base unset R36A Board WAN MAC is 00:c0:ca:a9:47:81 R36A Board LAN MAC is 00:c0:ca:a9:47:80 PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff] pci_bus 0000:00: root bus resource [io 0x0000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] clocksource: Switched to clocksource MIPS NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Crashlog allocated RAM at address 0x3f00000 squashfs: version 4.0 (2009/01/31) Phillip Lougher jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled console [ttyS0] disabled serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A console [ttyS0] enabled console [ttyS0] enabled bootconsole [early0] disabled bootconsole [early0] disabled m25p80 spi0.0: found mx25l12805d, expected m25p80 m25p80 spi0.0: mx25l12805d (16384 Kbytes) 3 cmdlinepart partitions found on MTD device spi0.0 Creating 3 MTD partitions on "spi0.0": 0x000000000000-0x000000070000 : "u-boot" 0x000000070000-0x000000080000 : "art" 0x000000080000-0x000001000000 : "firmware" 2 uimage-fw partitions found on MTD device firmware 0x000000080000-0x0000001b0000 : "kernel" 0x0000001b0000-0x000001000000 : "rootfs" mtd: device 4 (rootfs) set to be root filesystem 1 squashfs-split partitions found on MTD device rootfs 0x000000a70000-0x000001000000 : "rootfs_data" libphy: ag71xx_mdio: probed ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII ag71xx-mdio.1: Found an AR934X built-in switch eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII NET: Registered protocol family 17 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Bridge firewalling registered Ebtables v2.0 registered 8021q: 802.1Q VLAN Support v1.8 VFS: Mounted root (squashfs filesystem) readonly on device 31:4. Freeing unused kernel memory: 188K zram: Added device: zram0 failed to find a module named ext4 zram0: detected capacity change from 0 to 16777216 init: Can't exec /sbin/mkfs.ext4 init: Can't mount /dev/zram0 on /tmp: No such device init: Console is alive init: - watchdog - kmodloader: loading kernel modules from /etc/modules-boot.d/* usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver SCSI subsystem initialized ehci-platform: EHCI generic platform driver ehci-platform ehci-platform: EHCI Host Controller ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 ehci-platform ehci-platform: irq 3, io mem 0x1b000000 ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage kmodloader: done loading kernel modules from /etc/modules-boot.d/* init: - preinit - Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level eth1: link up (1000Mbps/Full duplex) mount_root: loading kmods from internal overlay kmodloader: loading kernel modules from //etc/modules-boot.d/* kmodloader: done loading kernel modules from //etc/modules-boot.d/* jffs2: notice: (569) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab block: extroot: not configured jffs2: notice: (566) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab block: extroot: not configured mount_root: switching to jffs2 overlay urandom-seed: Seeding with /etc/urandom.seed eth1: link down procd: - early - procd: - watchdog - random: jshn: uninitialized urandom read (4 bytes read, 20 bits of entropy available) procd: - watchdog - procd: - ubus - random: ubusd: uninitialized urandom read (4 bytes read, 21 bits of entropy available) random: ubusd: uninitialized urandom read (4 bytes read, 21 bits of entropy available) random: ubusd: uninitialized urandom read (4 bytes read, 21 bits of entropy available) random: ubusd: uninitialized urandom read (4 bytes read, 21 bits of entropy available) random: ubusd: uninitialized urandom read (4 bytes read, 21 bits of entropy available) random: ubusd: uninitialized urandom read (4 bytes read, 21 bits of entropy available) random: ubusd: uninitialized urandom read (4 bytes read, 21 bits of entropy available) procd: - init - Please press Enter to activate this console. kmodloader: loading kernel modules from /etc/modules.d/* tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Netfilter messages via NETLINK v0.30. ip_set: protocol 6 Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f Backport generated by backports.git backports-20160324-13-g24da7d3c i2c /dev entries driver hidraw: raw HID events driver (C) Jiri Kosina u32 classifier input device check on Actions configured Mirror/redirect action on nf_conntrack version 0.5.0 (1963 buckets, 7852 max) usbcore: registered new interface driver cdc_wdm hso: drivers/net/usb/hso.c: Option Wireless usbcore: registered new interface driver hso ip_tables: (C) 2000-2006 Netfilter Core Team usbcore: registered new interface driver ipheth usbcore: registered new interface driver mt7601u ctnetlink v0.93: registering with nfnetlink. usbcore: registered new interface driver rtl8187 usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic wireguard: WireGuard 0.0.20171017 loaded. See www.wireguard.com for information. wireguard: Copyright (C) 2015-2017 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. usbcore: registered new interface driver cdc_xr_usb_serial xr_usb_serial_common: Exar USB UART (serial port) driver xt_time: kernel timezone is -0000 usbcore: registered new interface driver ath9k_htc usbcore: registered new interface driver cdc_eem usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver cdc_ncm usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver huawei_cdc_ncm usbcore: registered new interface driver kalmia PPP generic driver version 2.4.2 NET: Registered protocol family 24 usbcore: registered new interface driver qmi_wwan usbcore: registered new interface driver rndis_host usbcore: registered new interface driver rt2800usb usbcore: registered new interface driver rtl8192cu usbcore: registered new interface driver sierra usbserial: USB Serial support registered for Sierra USB modem usbcore: registered new interface driver sierra_net usbcore: registered new interface driver usb_serial_simple usbserial: USB Serial support registered for carelink usbserial: USB Serial support registered for zio usbserial: USB Serial support registered for funsoft usbserial: USB Serial support registered for flashloader usbserial: USB Serial support registered for google usbserial: USB Serial support registered for vivopay usbserial: USB Serial support registered for moto_modem usbserial: USB Serial support registered for novatel_gps usbserial: USB Serial support registered for hp4x usbserial: USB Serial support registered for suunto usbserial: USB Serial support registered for siemens_mpi ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47 usbcore: registered new interface driver cdc_mbim usbcore: registered new interface driver ipw usbserial: USB Serial support registered for IPWireless converter usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem kmodloader: done loading kernel modules from /etc/modules.d/* random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available) random: ubusd: uninitialized urandom read (4 bytes read, 25 bits of entropy available) device eth0 entered promiscuous mode br-lan: port 1(eth0) entered forwarding state br-lan: port 1(eth0) entered forwarding state br-lan: port 1(eth0) entered disabled state device wlan0 entered promiscuous mode br-lan: port 2(wlan0) entered forwarding state br-lan: port 2(wlan0) entered forwarding state br-lan: port 2(wlan0) entered forwarding state BusyBox v1.25.1 () built-in shell (ash) _ ______ /\ | | | ____| /\ / \ | | | | / \ / /\ \ | | | |____ / /\ \ / /__\ \ | | | ____| / /__\ \ / /____\ \ | |____ | | / /____\ \ /_/ \_\|______||_| /_/ \_\ ------------------------------------------- Product : R36A auci v1.6 (alfa) Home : http://www.alfa.com.tw/ BUG Report : http://bug.alfa.com.tw/ Support : http://support.alfa.com.tw/ ------------------------------------------- root@R36A:/#
OpenWrt bootlog
*************************************** * U-Boot 1.1.4-8b5b9e8c-clean * * Build: 2017-09-07 * *************************************** ** Warning: bad env CRC, using default, use 'saveenv' to save it in FLASH BOARD: ALFA R36A - HW_R0C SOC: QCA953x ver. 2 rev. 0 CPU: MIPS 24Kc RAM: 128 MB DDR2 16-bit CL3-4-4-10 FLASH: 16 MB Macronix MX25L128 MAC: 00:C0:CA:A8:31:0C CLOCKS: CPU/RAM/AHB/SPI/REF 650/400/200/ 25/ 25 MHz Hit ESC key to stop booting: 1 0 Booting image from 0x9F080000... Image name: MIPS OpenWrt Linux-4.14.195 Build date: 2020-09-06 16:19:39 UTC Architecture: MIPS OS/image type: Linux Kernel Compression: LZMA Data size: 1.5 MB (1587385 bytes) Load address: 0x80060000 Entry point: 0x80060000 Header CRC... OK! Data CRC... skipped Stopping network... OK! Uncompressing Kernel... OK! Starting kernel... [ 0.000000] Linux version 4.14.195 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11208-ce6496d796)) #0 Sun Sep 6 16:19:39 2020 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] random: get_random_bytes called from 0x804f0740 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: board=R36A mtdparts=spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) console=ttyS0,115200 rootfstype=squashfs noinitrd [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 124292K/131072K available (3950K kernel code, 197K rwdata, 516K rodata, 320K init, 212K bss, 6780K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] Clocks: CPU:650.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns [ 0.000010] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns [ 0.008905] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688) [ 0.076020] pid_max: default: 32768 minimum: 301 [ 0.081508] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089024] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.099687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.110929] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.119308] NET: Registered protocol family 16 [ 0.126138] MIPS: machine is ALFA Network R36A [ 0.628933] clocksource: Switched to clocksource MIPS [ 0.636025] NET: Registered protocol family 2 [ 0.642049] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.650057] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.657283] TCP: Hash tables configured (established 1024 bind 1024) [ 0.664710] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.671426] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.678845] NET: Registered protocol family 1 [ 0.688408] Crashlog allocated RAM at address 0x3f00000 [ 0.696009] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.709126] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.715748] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.738349] io scheduler noop registered [ 0.742880] io scheduler deadline registered (default) [ 0.749268] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.758774] console [ttyS0] disabled [ 0.783037] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A [ 0.792856] console [ttyS0] enabled [ 0.792856] console [ttyS0] enabled [ 0.800424] bootconsole [early0] disabled [ 0.800424] bootconsole [early0] disabled [ 0.817226] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.824061] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.829386] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.835494] Creating 4 MTD partitions on "spi0.0": [ 0.840477] 0x000000000000-0x000000060000 : "u-boot" [ 0.847730] 0x000000060000-0x000000070000 : "u-boot-env" [ 0.854981] 0x000000070000-0x000000080000 : "art" [ 0.862356] 0x000000080000-0x000001000000 : "firmware" [ 0.888659] 2 uimage-fw partitions found on MTD device firmware [ 0.894862] 0x000000080000-0x000000210000 : "kernel" [ 0.900941] 0x000000210000-0x000001000000 : "rootfs" [ 0.906851] mtd: device 5 (rootfs) set to be root filesystem [ 0.912816] 1 squashfs-split partitions found on MTD device rootfs [ 0.919237] 0x000000480000-0x000001000000 : "rootfs_data" [ 0.929358] libphy: Fixed MDIO Bus: probed [ 0.964740] libphy: ag71xx_mdio: probed [ 1.601970] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY] [ 1.612108] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii [ 2.241513] ag71xx-mdio.1: Found an AR934X built-in switch [ 2.294795] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: gmii [ 2.303530] NET: Registered protocol family 10 [ 2.314063] Segment Routing with IPv6 [ 2.317960] NET: Registered protocol family 17 [ 2.322705] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.336836] 8021q: 802.1Q VLAN Support v1.8 [ 2.343252] hctosys: unable to open rtc device (rtc0) [ 2.354352] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 2.364143] Freeing unused kernel memory: 320K [ 2.368739] This architecture does not have kernel memory protection. [ 2.538955] random: fast init done [ 3.059529] init: Console is alive [ 3.063359] init: - watchdog - [ 4.107489] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.173511] usbcore: registered new interface driver usbfs [ 4.179378] usbcore: registered new interface driver hub [ 4.184980] usbcore: registered new device driver usb [ 4.196573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.205290] ehci-platform: EHCI generic platform driver [ 4.210892] ehci-platform ehci-platform: EHCI Host Controller [ 4.216880] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 4.227239] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 4.258981] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 4.266410] hub 1-0:1.0: USB hub found [ 4.270817] hub 1-0:1.0: 1 port detected [ 4.276360] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.286473] init: - preinit - [ 4.749177] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 4.893746] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.926611] random: procd: uninitialized urandom read (4 bytes read) Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 5.010998] hub 1-1:1.0: USB hub found [ 5.015502] hub 1-1:1.0: 4 ports detected [ 6.982545] eth0: link up (100Mbps/Full duplex) [ 6.987284] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.205953] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 8.245110] urandom-seed: Seed file not found (/etc/urandom.seed) [ 8.414664] eth0: link down [ 8.432345] procd: - early - [ 8.435469] procd: - watchdog - [ 9.082584] procd: - watchdog - [ 9.086222] procd: - ubus - [ 9.189451] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.241868] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.249107] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.256869] procd: - init - Please press Enter to activate this console. [ 9.980822] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.092168] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.120642] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6 [ 10.128566] Backport generated by backports.git v4.19.137-1-0-g60c3a249 [ 10.161828] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.188442] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) [ 10.330007] xt_time: kernel timezone is -0000 [ 10.464628] urngd: v1.0.2 started. [ 10.474995] PPP generic driver version 2.4.2 [ 10.490134] NET: Registered protocol family 24 [ 10.596985] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47 [ 10.729446] kmodloader: done loading kernel modules from /etc/modules.d/* [ 10.927667] random: crng init done [ 10.931253] random: 6 urandom warning(s) missed due to ratelimiting [ 53.887316] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 53.924045] jffs2_build_filesystem(): unlocking the mtd device... [ 53.924061] done. [ 53.932534] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 54.213384] br-lan: port 1(eth0) entered blocking state [ 54.226619] br-lan: port 1(eth0) entered disabled state [ 54.232420] device eth0 entered promiscuous mode [ 54.299795] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 54.438144] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 56.262659] eth0: link up (100Mbps/Full duplex) [ 56.267421] br-lan: port 1(eth0) entered blocking state [ 56.272887] br-lan: port 1(eth0) entered forwarding state [ 56.326618] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 102.828635] done. [ 102.830718] jffs2: notice: (1256) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 103.111892] overlayfs: upper fs does not support tmpfile. BusyBox v1.30.1 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 19.07.4, r11208-ce6496d796 ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:/#
Notes
Space for additional notes, links to forum threads or other resources.
- ...