Netgear Orbi RBR350/RBS350

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

The Netgear RBx350 are dual band 4 stream 802.11ax mesh devices from the Orbi series. The RBR350 is a router with a WAN and 3 LAN ports. The RBS350 is a satellite without WAN port, only 2 LAN ports and half the flash. The hardware is otherwise identical. They were sold in kits as RBK352, RBK353, RBK354 or RBK355, with one router and 1-4 satellites.

Work in Progress

Initial Pull Request

Model	CPU	Ram	Flash	Network	WLAN	Serial
RBR350	Qualcomm IPQ6018	512 MiB	512 MiB	1x WAN, 3x LAN 10/100/1000	2.4 GHz 2×2:2 b/g/n/ax, 5 GHz 2×2:2 a/n/ac/ax	Yes, internal populated header
RBS350	Qualcomm IPQ6018	512 MiB	256 MiB	2x LAN 10/100/1000	2.4 GHz 2×2:2 b/g/n/ax, 5 GHz 2×2:2 a/n/ac/ax	Yes, internal populated header

Notes

The stock firmware images are signed. Both the bootloader and the stock web interface check the signature and will fail to boot/flash. The bootloader automatically does NMRP when a gigabit LAN connection is present. The stock and factory images contain a U-Boot script that is executed when flashing using NMRP. This is used to alter and persist the U-Boot env with a boot command that works with unsigned firmware.

Install

Get the nmrpflash utility and OpenWrt factory image
Find network interface to use: nmrpflash -L
Start nmrpflash: nmrpflash -i interface -f openwrt-...-factory.img
Connect one of the device LAN ports to the same network using gigabit
Plug the device in and wait for the bootloader to flash
Unplug and replug the device once the power LED blinks amber

Revert to Stock

The boot command needs to be reverted before flashing the stock firmware, otherwise it will fail to boot and get stuck in recovery mode (red power LED flashing). Still in OpenWrt run these commands to restore the original values:

fw_setenv bootcmd bootipq
fw_setenv bootargs console=ttyMSM0,115200n8

Restart the device and flash the stock firmware RBx350-Va.b.c.d.img using nmrpflash.

The default network configuration on the RBR350 router is:

Interface Name	Description	Default configuration
br-lan	LAN & WiFi	static 192.168.1.1/24
wan	WAN	DHCP

The default network configuration on the RBS350 satellite is:

Interface Name	Description	Default configuration
br-lan	LAN & WiFi	DHCP

→ hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

The Netgear RBx350 have the following buttons:

BUTTON	Event
Reset	reset
Sync	wps

Architecture	AArch64
Vendor	Qualcomm
Bootloader	U-Boot
System-On-Chip	Qualcomm IPQ6018
CPU/Speed	Quad Core ARM Cortex-A53 @ 1.8GHz
Flash-Chip	Winbond W29N04GZ (RBR350) or W29N02GZ (RBS350)
Flash size	512 MiB (RBR350) or 256 MiB (RBS350)
RAM	512 MiB 1x Nanya NT5CC256M16ER-EK
Wireless 2.4 GHz	QCN5022 2×2:2 b/g/n/ax
Wireless 5 GHz	QCN5052 2×2:2 a/n/ac/ax
Ethernet	1x WAN, 3x LAN (RBR350) or 2x LAN (RBS350)
Switch	Qualcomm QCA8075
Serial	Yes internal populated header
JTAG	probably

There are two TX20 screws hidden below the long rubber strip on the bottom. They are pretty visible so that cutting two sections of the strip out is one easy approach to make the internals accessible. Once the two screws are removed, the front cover can be pushed upwards so that it slides out of its hinges. Then the internal cover can be unscrewed with the 4 Phillips head screws and lifted off. The antenna on the right can be pulled out so that the PCB can be lifted and turned over without unplugging or removing the antenna on the left.

→ port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

Serial connection parameters for Netgear RBx350	115200, 8N1, 3.3V

Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00077-IPQ60xxLZB-2 S - IMAGE_VARIANT_STRING=IPQ6018LA S - OEM_IMAGE_VERSION_STRING=crm-ubuntu64 S - Boot Interface: NAND S - Secure Boot: On S - Boot Config @ 0x000a602c = 0x000002e5 S - JTAG ID @ 0x000a607c = 0x001390e1 S - OEM ID @ 0x000a6080 = 0x4e470006 S - Serial Number @ 0x000a4128 = 0x5a687226 S - Feature Config Row 0 @ 0x000a4130 = 0x0000800018200021 S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83783000009 S - PBL Patch Ver: 1 S - I-cache: On S - D-cache: On B - 3413 - PBL, Start B - 592 - bootable_media_detect_entry, Start B - 4339 - bootable_media_detect_success, Start B - 5207 - elf_loader_entry, Start B - 5380 - auth_hash_seg_entry, Start B - 7846 - auth_hash_seg_exit, Start B - 17214 - elf_segs_hash_verify_entry, Start B - 119367 - elf_segs_hash_verify_exit, Start B - 123789 - auth_xbl_sec_hash_seg_entry, Start B - 123932 - auth_xbl_sec_hash_seg_exit, Start B - 130272 - xbl_sec_segs_hash_verify_entry, Start B - 130273 - xbl_sec_segs_hash_verify_exit, Start B - 131202 - PBL, End B - 110074 - SBL1, Start B - 240584 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4 B - 243024 - clock_init, Start D - 2714 - clock_init, Delta B - 251503 - boot_flash_init, Start D - 29707 - boot_flash_init, Delta B - 284473 - sbl1_ddr_set_default_params, Start D - 213 - sbl1_ddr_set_default_params, Delta B - 291092 - boot_config_data_table_init, Start D - 4697 - boot_config_data_table_init, Delta - (575 Bytes) B - 300913 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:2,Subtype:0 B - 305793 - Image Load, Start D - 6619 - OEM_MISC Image Loaded, Delta - (0 Bytes) B - 315126 - Image Load, Start D - 5094 - PMIC Image Loaded, Delta - (0 Bytes) B - 322995 - sbl1_ddr_set_params, Start B - 327966 - CPR configuration: 0x366 B - 331169 - Pre_DDR_clock_init, Start D - 183 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta B - 367799 - Image Load, Start D - 427 - APDP Image Loaded, Delta - (0 Bytes) B - 380914 - Image Load, Start D - 427 - QTI_MISC Image Loaded, Delta - (0 Bytes) B - 383354 - Image Load, Start D - 7869 - Auth Metadata D - 671 - Segments hash check D - 29280 - QSEE Dev Config Image Loaded, Delta - (36354 Bytes) B - 414556 - Image Load, Start D - 13359 - Auth Metadata D - 10522 - Segments hash check D - 336171 - QSEE Image Loaded, Delta - (1470632 Bytes) B - 751184 - Image Load, Start D - 7533 - Auth Metadata D - 946 - Segments hash check D - 41358 - RPM Image Loaded, Delta - (102664 Bytes) B - 794220 - Image Load, Start D - 7412 - Auth Metadata D - 3203 - Segments hash check D - 126361 - APPSBL Image Loaded, Delta - (566148 Bytes) B - 936197 - SBL1, End D - 826428 - SBL1, Delta S - Flash Throughput, 5000 KB/s (2177045 Bytes, 426016 us) S - Core 0 Frequency, 800 MHz S - DDR Frequency, 466 MHz U-Boot 2016.01_rtm-4.3.2.25 (Aug 23 2020 - 09:19:39 -0700), Build: jenkins-Orbi_Firmware_Kale-81 DRAM: smem ram ptable found: ver: 2 len: 4 512 MiB NAND: ONFI device found ID = 1590acef Vendor = ef Device = ac SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000 ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 512 MiB MMC: sdhci: Node Not found, skipping initialization PCI0 is not defined in the device tree In: serial@78B1000 Out: serial@78B1000 Err: serial@78B1000 machid: 8030200 eth0 MAC Address from ART is not valid eth1 MAC Address from ART is not valid eth2 MAC Address from ART is not valid eth3 MAC Address from ART is not valid eth4 MAC Address from ART is not valid eth5 MAC Address from ART is not valid Net: MAC0 addr:9c:c9:eb:d8:7b:e4 PHY ID1: 0x4d PHY ID2: 0xd0b1 EDMA ver 1 hw init Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0) RxDesc:1 (15-15) RxFill:1 (7-7) ipq6018_edma_alloc_rings: successfull ipq6018_edma_setup_ring_resources: successfull ipq6018_edma_configure_rings: successfull ipq6018_edma_hw_init: successfull eth0 ipq6018_eth_halt: done eth0 PHY0 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex eth0 PHY2 Down Speed :10 Half duplex eth0 PHY3 Down Speed :10 Half duplex eth0 PHY4 Down Speed :10 Half duplex ipq6018_eth_halt: done nmrp server is stopped or failed ! Hit any key to stop autoboot: 0 ubi0: attaching mtd1 ubi0: scanning is finished ubi0: attached mtd1 (name "mtd=0", size 53 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 428, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1882690254 ubi0: available PEBs: 0, total reserved PEBs: 428, PEBs reserved for bad PEB handling: 54 Read 148 bytes from volume kernel to 44000000 Parsing phdr load addr 0x0 offset 0x0 size 0x94 type 0x0 Parsing phdr load addr 0x443b0000 offset 0x1000 size 0x1a38 type 0x0 Parsing phdr load addr 0x44000000 offset 0x3000 size 0x3afcc8 type 0x1 Read 0 bytes from volume kernel to 43ffd000 No size specified -> Using max size (3878088) ## Loading kernel from FIT Image at 44000000 ... Using 'config@cp03-c1' configuration Trying 'kernel@1' kernel subimage Description: ARM OpenWrt Linux-4.4.60 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e4 Data Size: 3662076 Bytes = 3.5 MiB Architecture: ARM OS: Linux Load Address: 0x41208000 Entry Point: 0x41208000 Hash algo: crc32 Hash value: 4fc40fb6 Hash algo: sha1 Hash value: 2e83bcbbce7731ae0347fdc99f1a2f27be159ea9 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000000 ... Using 'config@cp03-c1' configuration Trying 'fdt@cp03-c1' fdt subimage Description: ARM OpenWrt qcom-ipq60xx-cpxx device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x4439f0e4 Data Size: 66174 Bytes = 64.6 KiB Architecture: ARM Hash algo: crc32 Hash value: 0fb12340 Hash algo: sha1 Hash value: 0adf71520ffbf6bbea1293b4bc26238b89dc24a0 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x4439f0e4 Uncompressing Kernel Image ... OK Loading Device Tree to 484ec000, end 484ff27d ... OK Could not find PCI in device tree Using machid 0x8030200 from environment Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.60 (rajenkins@a00bb7ea8d9d) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 rtm-4.4.2.1+r49254) ) #1 SMP PREEMPT Fri Nov 15 11:49:22 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ6018/AP-CP03-C1 [ 0.000000] Flash name: [ 0.000000] Ignoring memory range 0x40000000 - 0x41000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 11 pages/cpu @9eb3f000 s15424 r8192 d21440 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 108964 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 coherent_pool=2M [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 426660K/440320K available (5271K kernel code, 381K rwdata, 1772K rodata, 1024K init, 278K bss, 13660K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0x9f800000 - 0xff800000 (1536 MB) [ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80208000 - 0x809e0f48 (8036 kB) [ 0.000000] .init : 0x80a00000 - 0x80b00000 (1024 kB) [ 0.000000] .data : 0x80b00000 - 0x80b5f580 ( 382 kB) [ 0.000000] .bss : 0x80b62000 - 0x80ba783c ( 279 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000016] Switching to timer-based delay loop, resolution 41ns [ 0.000650] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000662] pid_max: default: 32768 minimum: 301 [ 0.000752] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000762] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001277] Initializing cgroup subsys io [ 0.001292] Initializing cgroup subsys memory [ 0.001315] Initializing cgroup subsys devices [ 0.001329] Initializing cgroup subsys freezer [ 0.001340] Initializing cgroup subsys net_cls [ 0.001349] Initializing cgroup subsys pids [ 0.001371] CPU: Testing write buffer coherency: ok [ 0.001733] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001780] Setting up static identity map for 0x41300000 - 0x41300058 [ 0.052549] MSM Memory Dump base table set up [ 0.052574] MSM Memory Dump apps data table set up [ 0.090263] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.120247] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.150280] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.150333] Brought up 4 CPUs [ 0.150352] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.150358] CPU: All CPU(s) started in SVC mode. [ 0.167925] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4 [ 0.168218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.168242] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.168608] pinctrl core: initialized pinctrl subsystem [ 0.169565] NET: Registered protocol family 16 [ 0.170648] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.200120] cpuidle: using governor ladder [ 0.230138] cpuidle: using governor menu [ 0.243782] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.255503] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.255513] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.256992] CPU: IPQ6018, SoC Version: 1.0 [ 0.257205] <CORE> glink_init: IPC Logging Disabled [ 0.257491] <CORE> glink_core_register_transport: IPC Logging disabled [ 0.257554] msm_glink_smem_native_xprt rx fifo not found [ 0.257854] <CORE> glink_core_register_transport: IPC Logging disabled [ 0.257902] glink_core_link_up glink is up [ 0.258182] msm_rpm_dev_probe: APSS-RPM communication over GLINK [ 0.258258] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests [ 0.259132] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.261228] IPC logging disabled [ 0.261234] IPC logging disabled [ 0.261239] IPC logging disabled [ 0.261243] IPC logging disabled [ 0.261248] IPC logging disabled [ 0.261454] sps:sps is ready. [ 0.291684] pps_core: LinuxPPS API ver. 1 registered [ 0.291694] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.291719] PTP clock support registered [ 0.293625] clocksource: Switched to clocksource arch_sys_counter [ 0.296402] NET: Registered protocol family 2 [ 0.296942] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.296991] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.297066] TCP: Hash tables configured (established 4096 bind 4096) [ 0.297104] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.297127] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.297278] NET: Registered protocol family 1 [ 0.298653] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.306045] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.306062] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.309984] Key type asymmetric registered [ 0.310000] Asymmetric key parser 'x509' registered [ 0.310041] io scheduler noop registered [ 0.310055] io scheduler deadline registered (default) [ 0.318413] NET: Registered protocol family 27 [ 0.318424] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled [ 0.318438] qmi_log_init: IPC Logging disabled [ 0.318444] qmi_log_init: IPC Logging disabled [ 0.318567] msm_rpm_log_probe: OK [ 0.318877] msm-dcc b3000.dcc: DCC XPU is not specified [ 0.319139] msm-dcc b3000.dcc: jiffies_64: 0xffff8aef, cntvct_64: 0xfa40993 [ 0.319151] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0x9fb04004) [ 0.319162] msm-dcc b3000.dcc: gcnt_lo: 0x0fa40be3(0x9fb04000) [ 0.319875] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set [ 0.320596] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.320627] msm_serial 78b1000.serial: uartclk = 1843200 [ 0.320667] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 20, base_baud = 115200) is a MSM [ 0.320687] msm_serial: console setup on port #0 [ 1.014281] console [ttyMSM0] enabled [ 1.019324] msm_serial: driver initialized [ 1.022807] msm_serial_hsl_init: driver initialized [ 1.036053] brd: module loaded [ 1.037760] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac [ 1.037998] nand: ONFI 10-Compliant Winbond W29N04GZ [ 1.044563] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.049590] 32 ofpart partitions found on MTD device qcom_nand.0 [ 1.056886] Creating 32 MTD partitions on "qcom_nand.0": [ 1.062998] 0x000000000000-0x000000180000 : "0:SBL1" [ 1.070339] 0x000000180000-0x000000280000 : "0:MIBIB" [ 1.074789] 0x000000280000-0x000000300000 : "0:BOOTCONFIG" [ 1.079349] 0x000000300000-0x000000380000 : "0:BOOTCONFIG1" [ 1.084737] 0x000000380000-0x000000700000 : "0:QSEE" [ 1.092614] 0x000000700000-0x000000a80000 : "0:QSEE_1" [ 1.097852] 0x000000a80000-0x000000b00000 : "0:DEVCFG" [ 1.100406] 0x000000b00000-0x000000b80000 : "0:DEVCFG_1" [ 1.105564] 0x000000b80000-0x000000c00000 : "0:RPM" [ 1.110963] 0x000000c00000-0x000000c80000 : "0:RPM_1" [ 1.115537] 0x000000c80000-0x000000d00000 : "0:CDT" [ 1.120735] 0x000000d00000-0x000000d80000 : "0:CDT_1" [ 1.125452] 0x000000d80000-0x000000e00000 : "0:APPSBLENV" [ 1.130654] 0x000000e00000-0x000000f80000 : "0:APPSBL" [ 1.136896] 0x000000f80000-0x000001100000 : "0:APPSBL_1" [ 1.141908] 0x000001100000-0x000001180000 : "0:ART" [ 1.146605] 0x000001180000-0x0000012c0000 : "config" [ 1.151805] 0x0000012c0000-0x0000013c0000 : "nvram" [ 1.156738] 0x0000013c0000-0x0000014c0000 : "boarddata" [ 1.161323] 0x0000014c0000-0x0000015c0000 : "boarddata.bak" [ 1.166556] 0x0000015c0000-0x000001640000 : "pot" [ 1.171714] 0x000001640000-0x0000016c0000 : "pot.bak" [ 1.176614] 0x0000016c0000-0x000001a40000 : "traffic_meter" [ 1.184047] 0x000001a40000-0x000001b40000 : "cert" [ 1.187436] 0x000001b40000-0x000001f40000 : "language" [ 1.194698] 0x000001f40000-0x000002940000 : "sstorage" [ 1.204582] 0x000002940000-0x000002d40000 : "Reserved1" [ 1.208521] 0x000002d40000-0x000002dc0000 : "oopsdump" [ 1.209743] 0x000002dc0000-0x000002fc0000 : "rae" [ 1.216129] 0x000002fc0000-0x0000057c0000 : "ntgrdata" [ 1.250946] 0x0000057c0000-0x000008d40000 : "rootfs_1" [ 1.294224] 0x000008d40000-0x00000c2c0000 : "rootfs" [ 1.337179] mtd: device 31 (rootfs) set to be root filesystem [ 1.337445] mtdsplit: no squashfs found in "rootfs" [ 1.342463] libphy: Fixed MDIO Bus: probed [ 1.567339] qca-mdio 90000.mdio: Could not find phy-reset-gpio [ 1.567472] libphy: qca_mdio: probed [ 1.573285] qca-mdio 90000.mdio: qca-mdio driver was registered [ 1.575961] Unable to create IPC log context! [ 1.581820] cnss: Platform driver probed successfully. [ 1.586163] i2c /dev entries driver [ 1.596920] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.598005] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 1.604515] ICE IRQ = 31 [ 1.613882] DEV CI test message [ 1.615933] remoteproc remoteproc0: q6v5-wcss is available [ 1.618574] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group [ 1.623731] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group [ 1.634128] remoteproc remoteproc1: q6v5-m3 is available [ 1.644730] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 [ 1.649726] coresight-csr 6001000.csr: CSR initialized [ 1.657184] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 [ 1.662154] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 [ 1.669707] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 [ 1.677089] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 [ 1.684467] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 [ 1.691830] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 [ 1.699236] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 [ 1.706607] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 [ 1.713987] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 [ 1.721345] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 [ 1.728744] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 [ 1.736125] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 [ 1.743490] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 [ 1.750879] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 [ 1.758263] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 [ 1.765642] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 [ 1.773006] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 [ 1.780507] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 [ 1.787888] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 [ 1.795297] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 [ 1.802705] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 [ 1.810067] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x06064000 [ 1.817115] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x06064000 [ 1.832807] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x06064000 [ 1.847313] sps:BAM 0x06064000 is registered.[ 1.854275] coresight-tmc 6048000.tmc: TMC initialized [ 1.858373] coresight-tmc 6047000.tmc: TMC initialized [ 1.863520] coresight-funnel 6041000.funnel: FUNNEL initialized [ 1.868562] coresight-funnel 6100000.funnel: FUNNEL initialized [ 1.874382] coresight-funnel 6130000.funnel: FUNNEL initialized [ 1.880268] coresight-funnel 6120000.funnel: FUNNEL initialized [ 1.886195] coresight-funnel 61a1000.funnel: FUNNEL initialized [ 1.892705] coresight-etm4x 619c000.etm: ETM 4.0 initialized [ 1.898377] coresight-etm4x 619d000.etm: ETM 4.0 initialized [ 1.904304] coresight-etm4x 619e000.etm: ETM 4.0 initialized [ 1.909978] coresight-etm4x 619f000.etm: ETM 4.0 initialized [ 1.915196] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized [ 1.920947] coresight-stm 6002000.stm: STM initialized [ 1.929531] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 [ 1.933355] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized [ 1.941395] Netfilter messages via NETLINK v0.30. [ 1.948598] nf_conntrack version 0.5.0 (6666 buckets, 26664 max) [ 1.953736] ip_set: protocol 6 [ 1.959553] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.962966] NET: Registered protocol family 10 [ 1.968310] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.971832] NET: Registered protocol family 17 [ 1.977306] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.981653] Bridge firewalling registered [ 1.994368] 8021q: 802.1Q VLAN Support v1.8 [ 1.998376] Registering SWP/SWPB emulation handler [ 2.004363] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 2.007338] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 2.014353] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 2.020917] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 2.028592] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 2.036104] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 2.045269] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 2.052171] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 2.062168] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 2.071975] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 912500 uV [ 2.081819] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 587, quot_offset[ 7]= 0 [ 2.091596] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 781, quot_offset[ 7]= 190 [ 2.102445] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 881, quot_offset[ 7]= 100 [ 2.113384] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 969, quot_offset[ 7]= 85 [ 2.124571] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 2.136881] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz [ 2.142677] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 864000 KHz [ 2.149952] ubi0: attaching mtd31 [ 2.377720] random: nonblocking pool is initialized [ 2.378533] ubi0: scanning is finished [ 2.386785] ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 54, need 80 [ 2.387486] ubi0: attached mtd31 (name "rootfs", size 53 MiB) [ 2.396026] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.401918] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.408698] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.415555] ubi0: good PEBs: 428, bad PEBs: 0, corrupted PEBs: 0 [ 2.422316] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 [ 2.428577] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1882690254 [ 2.435611] ubi0: available PEBs: 0, total reserved PEBs: 428, PEBs reserved for bad PEB handling: 54 [ 2.444911] ubi0: background thread "ubi_bgt0d" started, PID 133 [ 2.455831] hctosys: unable to open rtc device (rtc0) [ 2.469352] VFS: Mounted root (squashfs filesystem) readonly on device 31:34. [ 2.471145] Freeing unused kernel memory: 1024K (80a00000 - 80b00000) [ 2.964122] init: Console is alive [ 2.964231] init: - watchdog - [ 4.143830] Button Hotplug driver version 0.4.1 [ 4.983860] init: - preinit - Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Before mount_root Before DNI mount_root Info: init ubi volumes on ntgrdata raw partition [ 7.928073] ubi1: attaching mtd29 [ 8.095776] ubi1: scanning is finished [ 8.101511] ubi1: attached mtd29 (name "ntgrdata", size 40 MiB) [ 8.101534] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 8.106244] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 8.113173] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 8.120038] ubi1: good PEBs: 320, bad PEBs: 0, corrupted PEBs: 0 [ 8.126808] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 8.133053] ubi1: max/mean erase counter: 1738/1018, WL threshold: 4096, image sequence number: 833297128 [ 8.140095] ubi1: available PEBs: 0, total reserved PEBs: 320, PEBs reserved for bad PEB handling: 18 [ 8.149741] ubi1: background thread "ubi_bgt1d" started, PID 252 UBI device number 1, total 320 LEBs (40632320 bytes, 38.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) Info: attach ubi device on ntgrdata success! [ 8.230587] UBIFS (ubi1:2): background thread "ubifs_bgt1_2" started, PID 265 [ 8.257607] UBIFS (ubi1:2): recovery needed [ 8.376310] UBIFS (ubi1:2): recovery completed [ 8.376384] UBIFS (ubi1:2): UBIFS: mounted UBI device 1, volume 2, name "vol_ntgrdata" [ 8.379642] UBIFS (ubi1:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 8.387560] UBIFS (ubi1:2): FS size: 36569088 bytes (34 MiB, 288 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs) [ 8.397537] UBIFS (ubi1:2): reserved for root: 1727248 bytes (1686 KiB) [ 8.407775] UBIFS (ubi1:2): media format: w4/r0 (latest is w4/r0), UUID 2932B29F-B3CC-4411-82F3-4B877365A0CD, small LPT model After DNI mount_root After mount_root 65536+0 records in 65536+0 records out 65536 bytes (64.0KB) copied, 0.226435 seconds, 282.6KB/s ln: /lib/firmware/IPQ6018/caldata.bin: No such file or directory [ 8.691926] procd: - early - [ 8.693372] procd: - watchdog - [ 9.331390] procd: - ubus - [ 10.335156] procd: - init - Please press Enter to activate this console. [ 11.015041] ubi: mtd31 is already attached to ubi0 WIFI FW mount is successful Loading data from " config_dev " ... Done! The data center is Running ... do some on here [ 18.866710] cfg80211: World regulatory domain updated: [ 18.866738] cfg80211: DFS Master region: unset [ 18.870906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 18.875625] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 18.878201] device-mapper: req-crypt: dm-req-crypt successfully initalized. [ 18.878201] [ 18.892889] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 18.901574] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 18.910690] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 18.918677] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 18.928418] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 18.937868] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 18.945928] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 19.221674] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1 [ 19.225416] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist! [ 19.232287] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus [ 19.238447] ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000 [ 19.245575] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000 [ 19.252858] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0 [ 19.259279] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xff [ 19.264843] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xff [ 19.270598] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist! [ 19.276412] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC 9c:c9:eb:d8:7b:e4 [ 19.282328] ssdk_plat_init start [ 19.364635] ssdk_ppe_clock_init[517]:INFO:ppe and uniphy clock init successfully! [ 19.368118] HPPE initializing... [ 19.371326] malibu_phy_api_ops_init[2849]:INFO:qca probe malibu phy driver succeeded! [ 19.382085] regi_init[3359]:INFO:Initializing HPPE!! [ 19.603635] ssdk_ppe_reset_init[798]:INFO:ppe reset successfully! [ 19.609264] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96 [ 19.612926] qca_hppe_portctrl_hw_init[159]:INFO:Cypress PPE port initializing [ 19.724028] __adpt_hppe_uniphy_psgmii_mode_set[620]:INFO:uniphy 0 psgmii channel selection [ 19.938809] ssdk_switch_register[1617]:INFO:Chip version 0x1501 [ 19.941789] qca_link_polling_select[1279]:INFO:link-polling-required node does not exist [ 19.948029] ssdk_switch_register[1642]:INFO:polling is selected [ 19.955784] regi_init[3363]:INFO:Initializing HPPE Done!! [ 19.960671] regi_init[3407]:INFO:qca-ssdk module init succeeded! [ 19.989589] tun: Universal TUN/TAP device driver, 1.6 [ 19.989612] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 19.997057] EDMA ver 1 hw init [ 19.999901] EDMA HW Reset completed succesfully [ 20.002755] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 20.007179] RxDesc:1 (15-15) RxFill:1 (7-7) [ 20.014180] GMAC2(9d5ef500) Invalid MAC@ - using ca:cb:52:e3:8b:7f [ 20.017772] GMAC3(9be69500) Invalid MAC@ - using 02:d4:81:41:5f:4c [ 20.024045] GMAC4(9be6bd00) Invalid MAC@ - using 92:69:af:41:60:d1 [ 20.030223] GMAC5(9be6e500) Invalid MAC@ - using 7a:d9:e7:dc:09:e6 [ 20.036315] ********************************************************** [ 20.041446] * NSS Data Plane driver [ 20.048086] ********************************************************** [ 20.054748] l2tp_core: L2TP core driver, V2.0 [ 20.058606] l2tp_netlink: L2TP netlink interface [ 20.141655] qca-nss 39000000.nss: Direct firmware load for qca-nss0.bin failed with error -2 [ 20.141686] qca-nss 39000000.nss: Falling back to user helper /lib/firmware/qca-nss0.bin 33 [ 20.582526] nss_driver - fw of size 725584 bytes copied to load addr: 40000000, nss_id : 0 [ 20.583746] Supported Frequencies - [ 20.589672] 187.2 MHz 748.8 MHz [ 20.595664] 1.4976 GHz [ 20.596611] [ 20.599047] node size 2 # items 4 [ 20.600436] memory: 40000000 536870912 (avl 462368768) items 4 active_cores 1 [ 20.603669] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 [ 20.610772] 7f340180: NSS core 0 DDR from 40000000 to 41000000 [ 20.617667] 7f340180: meminfo init succeed [ 20.628514] sit: IPv6 over IPv4 tunneling driver [ 20.630667] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded. [ 20.634635] gre: GRE over IPv4 demultiplexor driver [ 20.641928] ip_gre: GRE over IPv4 tunneling driver [ 20.646990] ip6_gre: GRE over IPv6 tunneling driver [ 20.653517] node size 2 # items 4 [ 20.653795] Invalid macid 6 [ 20.657648] memory: 40000000 536870912 (avl 462368768) items 4 active_cores 1 [ 20.658134] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 20.661896] QCA multicast snooping installed successfully [ 20.673978] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 [ 20.679271] 7f340180: nss core 0 booted successfully [ 22.053845] ip6t_CONE: module license 'unspecified' taints kernel. [ 22.053870] Disabling lock debugging due to kernel taint [ 22.167994] Not a bridge device, or device not found: br- [ 23.034159] XHTTP netlink: create netlink OK. [ 26.757162] QCA Hy-Fi multicast installation successfully [ 27.565392] PPP generic driver version 2.4.2 [ 27.734295] nss_lag_init[354]:LAG Manager Installed [ 28.104297] NET: Registered protocol family 24 [ 28.444586] PPTP driver version 0.8.5 [ 28.540060] diag: IPC Logging disabled [ 28.835217] <NSS-CRYPTO>:module loaded Build_ID - 11/15/24, 11:36:59 SoC=ipq60xx [ 29.063411] cannot find nss-macsec0 node [ 29.063461] cannot find nss-macsec1 node [ 29.066444] cannot find nss-macsec2 node [ 29.070293] nss_macsec init success [ 31.404331] u32 classifier [ 31.404348] input device check on [ 31.405917] Actions configured [ 31.764304] Mirror/redirect action on [ 35.798165] fuse init (API version 7.23) [ 35.995448] arp_tables: (C) 2002 David S. Miller [ 35.997854] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 36.003087] ctnetlink v0.93: registering with nfnetlink. [ 36.005614] nf_conntrack_rtsp v0.6.21 loading [ 36.115351] nf_nat_rtsp v0.6.21 loading [ 36.152511] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net> [ 36.163079] PPP MPPE Compression module registered [ 36.169407] xt_time: kernel timezone is -0000 qcawifi configuration is disable [ 40.804920] qdf_dbg_mask value is invalid [ 40.804941] Using the default module debug levels instead [ 40.807919] qdf_print_ctrl_register: Allocated print control object 0 [ 40.813364] MINIDUMP VA .bss start=7f7240c0 module=qdf [ 43.702647] vmap allocation for size 2797568 failed: use vmalloc=<size> to increase size. [ 43.703872] vmap allocation for size 409600 failed: use vmalloc=<size> to increase size. [ 43.771052] wlan: [3382:E:CONFIG] cfg_uint_item_handler: 142: allow_mon_vaps_in_sr= - Invalid format (status 16); Using default 0 [ 43.771133] wlan: [3382:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50 [ 43.781772] MINIDUMP VA .bss start=a2d72640 module=umac******FW ini file not found****** ******No cold_boot_support***** [ 44.352607] vmap allocation for size 1228800 failed: use vmalloc=<size> to increase size. [ 44.353171] vmap allocation for size 217088 failed: use vmalloc=<size> to increase size. [ 44.397459] MINIDUMP VA .bss start=a079a1c0 module=qca_ol [ 44.579315] vmap allocation for size 667648 failed: use vmalloc=<size> to increase size. [ 44.586324] wlan: [3398:I:ANY] =======ol_if_register_wifi3_0========== [ 44.586324] [ 44.586641] wlan: [3398:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:a191789c [ 44.594402] remoteproc remoteproc1: powering up q6v5-m3 [ 44.612140] remoteproc remoteproc1: Booting fw image IPQ6018/m3_fw.mdt, size 6860 [ 44.612166] Sanity check passed for M3 image [ 44.668922] remoteproc remoteproc1: remote processor q6v5-m3 is now up [ 44.669023] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done [ 44.674361] wlan: [3398:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 2 [ 44.679815] remoteproc remoteproc0: powering up q6v5-wcss [ 44.704516] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 44.704886] Sanity check passed for the image [ 45.721863] glink_core_link_up glink is up [ 45.722030] glink_xprt_open_event [ 45.722241] Subsystem error monitoring/handling services are up [ 45.722275] remoteproc remoteproc0: remote processor q6v5-wcss is now up [ 45.722332] wlan: [3398:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 3 [ 45.740984] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled [ 45.844755] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 7f8d4204 [ 45.852802] cnss: QMI WLFW service connected, state: 0x1 [ 45.853108] cnss: device_id : 65533 mem mode : [1] [ 45.858548] cnss: No board_id entry in device tree [ 45.868881] cnss: BDF location : 0x4abc0000 [ 45.868903] cnss: BDF IPQ6018/bdwlan.bin size 65536 [ 45.872121] cnss: BDF download response , result: 0, err: 0x0 [ 45.876934] cnss: per device BDF location : 0x4abe0000 [ 45.882662] cnss: CALDATA IPQ6018/caldata.bin size 65536 offset 0x20000 [ 45.888810] cnss: BDF download response , result: 0, err: 0x0 [ 45.942410] wlan: [3398:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode [ 45.948185] wlan: [3398:I:ANY] qca_napi_create: 369: qca_napi_create: napi instance 0 created on pipe 4 [ 45.949024] wlan: [3398:I:ANY] __ol_ath_attach: 3520: Allocated soc 9a7c0500 [ 45.958351] wlan: [3398:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000 [ 45.965661] wlan: [3398:I:ANY] osif_nss_wifi_soc_setup: 189: nss register id -1 nss config 0 Target Type 19 [ 45.976962] wlan: [3398:I:ANY] __ol_ath_attach: 3746: dev name soc0 [ 45.986931] wlan: [3398:I:ANY] ol_ath_soc_attach: 7059: WMI attached. wmi_handle 9ab69800 [ 45.992831] wlan: [3398:I:ANY] htc_wmi_init: 6353: htc_wmi_init() HT Create . 9bc0b000 [ 46.001086] wlan: [3398:I:ANY] htc_wmi_init: 6360: htc_wmi_init() Skipping BMI Done. [ 46.009029] wlan: [3398:I:ANY] htc_wmi_init: 6417: [htc_wmi_init:6417] host_enable 0 nss_nwifi_offload 0 [ 46.021113] wlan: [3398:I:ANY] ol_target_init_complete: 6535: CDP soc attach success [ 46.026412] wlan: [3398:I:ANY] ol_target_init_complete: 6542: Soc attach success NSS config 0 [ 46.034322] wlan: [3398:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle 9bc0b000, ep 2, value 1 [ 46.042601] wlan: [3398:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle 9bc0b000, ep 3, value 1 [ 46.052318] wlan: [3398:I:ANY] 1 Target failed service 0x106 connect request (status:1) [ 46.052318] [ 46.061829] wlan: [3398:E:WMI] Failed to connect to WMI CONTROL service status:27 [ 46.061829] [ 46.072229] wlan: [3410:I:TIF] init_deinit_populate_hw_mode_capability: 361: Preferred mode is not set, use mode id 1 [ 46.072229] [ 46.080322] wlan: [3410:I:TIF] HE_CAP Info = 1a08010d [ 46.092380] wlan: [3410:I:TIF] Num HW modes = 2 [ 46.097488] wlan: [3410:I:TIF] Num PHY = 2 [ 46.101821] wlan: [3410:I:TIF] Preferred HW Mode = 1 Num Radios = 2 [ 46.106043] wlan: [3410:I:TIF] init_deinit_add_11ax_modes: 1440: Adding 11ax regulatory modes, [ 46.112161] wlan: [3410:I:TIF] init_deinit_add_11ax_modes: 1444: phy_id = 0 wireless modes = 391f9001 [ 46.120852] wlan: [3410:I:TIF] init_deinit_add_11ax_modes: 1440: Adding 11ax regulatory modes, [ 46.130137] wlan: [3410:I:TIF] init_deinit_add_11ax_modes: 1444: phy_id = 1 wireless modes = 680680c [ 46.138737] wlan: [3410:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 1 phy_id = 0 wireless modes = 0 [ 46.148028] wlan: [3410:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 1 phy_id = 1 wireless modes = 0 [ 46.157963] wlan: [3410:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 5 phy_id = 0 wireless modes = 0 [ 46.167815] wlan: [3410:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 5 phy_id = 1 wireless modes = 0 [ 46.177947] wlan: [3410:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 389: dfs_offload 1 [ 46.187621] wlan: [3410:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1579: dfs->dfs_psoc_idx: 0 [ 46.197970] wlan: [3410:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1585: dfs_soc_obj->num_dfs_privs: 1 [ 46.207573] wlan: [3410:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 361: Do not allocate DFS object for 2G, pdev_id = 1 [ 46.265405] wlan: [3410:I:TIF] init_deinit_update_pdev_tgt_info: 1082: CDP PDEV ATTACH success [ 46.277018] wlan: [3410:I:TIF] init_deinit_update_pdev_tgt_info: 1082: CDP PDEV ATTACH success [ 46.377785] wlan: [3410:I:ANY] copy_fw_abi_version_tlv: 6649: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 [ 46.473224] wlan: [3410:I:ANY] dp_peer_map_attach_wifi3: 8661: dp_peer_map_attach_wifi3 max_peers 311, max_ast_index: 1040 [ 46.473224] [ 46.473324] wlan: [3410:I:ANY] ready_extract_init_status_tlv: 8473: ready_extract_init_status_tlv:0 [ 46.485437] wlan: [3398:I:ANY] ol_ath_connect_htc: 1236: WMI is ready [ 46.494610] wlan: [3398:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable [ 46.500949] wlan: [3398:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable [ 46.509670] wlan: [3398:I:ANY] ol_ath_soc_attach: 7146: connect HTC [ 46.517349] wlan: [3398:I:ANY] ol_ath_soc_attach: 7147: bypasswmi : 0 [ 46.523453] wlan: [3398:E:WMI] event handler already registered 0x27001 [ 46.530074] wlan: [3398:E:WMI] event handler already registered 0x27002 [ 46.536487] wlan: [3398:E:WMI] event handler already registered 0x27003 [ 46.543080] wlan: [3398:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable [ 46.549712] wlan: [3398:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable [ 46.558415] wlan: [3398:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable [ 46.566891] wlan: [3398:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable [ 46.575470] wlan: [3398:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable [ 46.584066] wlan: [3398:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable [ 46.592556] wlan: [3398:I:ANY] ol_ath_soc_attach: 7227: ol_ath_soc_attach() UMAC attach . [ 46.601159] wlan: [3398:I:ANY] __ol_ath_attach: 3862: pdev_netdev name wifi0 [ 46.609295] wlan: [3398:I:ANY] __ol_ath_attach: 3908: Skip txrx_pdev_attach_target [ 46.616441] wlan: [3398:I:ANY] __ol_ath_attach: 3933: BURSTING enabled by default [ 46.623928] wlan: [3398:I:ANY] ol_ath_pdev_attach: 8524: interface_id 0 [ 46.631383] wlan: [3398:I:TIF] ol_ath_pdev_regdmn_init: 7388: phy id = 0 Modes supported [ 46.637805] wlan: [3398:I:TIF] ol_ath_pdev_regdmn_init: 7395: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 [ 46.646131] wlan: [3398:I:TIF] ol_ath_pdev_regdmn_init: 7404: Reg cap - phy_id = 0 supp_bnd = 2, modes = 391f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100 [ 46.656427] wlan: [3398:I:ANY] ol_ath_update_wireless_modes: 1351: wireless_modes = 391f9001 before update [ 46.670824] wlan: [3398:I:ANY] ol_ath_update_wireless_modes: 1366: Wireless_modes = 391f9001 after update [ 46.680412] wlan: [3398:I:ANY] ol_ath_update_ext_caps: 1915: 11ax 5G supported case [ 46.690215] wlan: [3398:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed [ 46.697587] wlan: [3398:I:ANY] ieee80211_cbs_init [ 46.704102] wlan: [3398:I:ANY] CBS Inited [ 46.704102] [ 46.709007] wlan: [3398:I:ANY] acfg_attach: 3473: acfg_attach: 3473: Netlink socket created:98a72000 [ 46.714447] wlan: [3398:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX [ 46.723736] wlan: [3398:I:ANY] ol_ath_stats_attach: 2134: periodic_chan_stats: 1 [ 46.734629] wlan: [3398:I:ANY] wlan_scan_update_channel_list: 1110: num_chan: 25 [ 46.741276] wlan: [0:I:ANY] ol_ath_pdev_attach: 8888: Set global_ic[1], ptr:a2d7296c [ 46.748625] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(9df79404) Enabling DBDC Repeater 1 [ 46.756391] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(9df79404) is_primary 1 [ 46.764485] wlan: [3398:I:ANY] ol_ath_pdev_attach: 9017: Pdev = 0 Number of peers = 137 [ 46.772969] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 14038: twt enabled. [ 46.772969] [ 46.781475] wlan: [3398:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11 [ 46.781475] [ 46.790511] wlan: [3398:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11 [ 46.790511] [ 46.800172] wlan: [3398:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 560: cfg block channel list is empty [ 46.809653] wlan: [3398:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3451: pdev_idx = 0 tx_desc_limit = 32768 [ 46.819289] wlan: [3398:I:ANY] osif_wrap_attach: 239: osif wrap attached [ 46.819289] [ 46.829028] wlan: [3398:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done [ 46.829028] [ 46.837198] wlan: [3398:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =94df1a00 ic->ic_wrap_com=94df1a00 &wrap_com->wc_devt=94df1a00 [ 46.837198] [ 46.846419] wlan: [3398:I:ANY] __ol_ath_attach: 4114: needed_headroom reservation 60 [ 46.860724] wlan: [3398:I:ANY] wlan_cfg80211_init: 10915: Number of 5G channels: 25 [ 46.868969] wlan: [3398:I:ANY] ieee80211_cfg80211_radio_attach: 11009: ic: 0x98a40500, wdev: 0x98a4fc9c, wiphy: 0x94dd8160, netdev: 0x98a40000 [ 46.877664] wlan: [3398:I:ANY] __ol_ath_attach: 3862: pdev_netdev name wifi1 [ 46.889032] wlan: [3398:I:ANY] __ol_ath_attach: 3908: Skip txrx_pdev_attach_target [ 46.896314] wlan: [3398:I:ANY] __ol_ath_attach: 3933: BURSTING enabled by default [ 46.903784] wlan: [3398:I:ANY] ol_ath_pdev_attach: 8524: interface_id 1 [ 46.911288] wlan: [3398:I:TIF] ol_ath_pdev_regdmn_init: 7388: phy id = 1 Modes supported [ 46.917652] wlan: [3398:I:TIF] ol_ath_pdev_regdmn_init: 7395: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 [ 46.925929] wlan: [3398:I:TIF] ol_ath_pdev_regdmn_init: 7404: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 [ 46.936166] wlan: [3398:I:ANY] ol_ath_update_wireless_modes: 1351: wireless_modes = 680680c before update [ 46.950584] wlan: [3398:I:ANY] ol_ath_update_wireless_modes: 1366: Wireless_modes = 680680c after update [ 46.960171] wlan: [3398:I:ANY] ol_ath_update_ext_caps: 1923: 11ax 2G supported case [ 46.969853] wlan: [3398:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed [ 46.977114] wlan: [3398:I:ANY] ieee80211_cbs_init [ 46.983611] wlan: [3398:I:ANY] CBS Inited [ 46.983611] [ 46.988631] wlan: [3398:I:ANY] acfg_attach: 3448: Offload using existing sock 98a72000 [ 46.993970] wlan: [3398:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX [ 47.001864] wlan: [3398:I:ANY] ol_ath_stats_attach: 2134: periodic_chan_stats: 1 [ 47.012524] wlan: [3398:I:ANY] wlan_scan_update_channel_list: 1110: num_chan: 11 [ 47.019593] wlan: [0:I:ANY] ol_ath_pdev_attach: 8888: Set global_ic[2], ptr:a2d7296c [ 47.026927] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(9d4bef04) Enabling DBDC Repeater 1 [ 47.034689] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(9d4bef04) is_primary 0 [ 47.042746] wlan: [3398:I:ANY] ol_ath_pdev_attach: 9017: Pdev = 1 Number of peers = 137 [ 47.051308] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 14038: twt enabled. [ 47.051308] [ 47.059852] wlan: [3398:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11 [ 47.059852] [ 47.068817] wlan: [3398:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11 [ 47.068817] [ 47.078471] wlan: [3398:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 560: cfg block channel list is empty [ 47.087898] wlan: [3398:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3451: pdev_idx = 1 tx_desc_limit = 32768 [ 47.097467] wlan: [3398:I:ANY] osif_wrap_attach: 239: osif wrap attached [ 47.097467] [ 47.107332] wlan: [3398:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done [ 47.107332] [ 47.115529] wlan: [3398:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =9ab58600 ic->ic_wrap_com=9ab58600 &wrap_com->wc_devt=9ab58600 [ 47.115529] [ 47.124716] wlan: [3398:I:ANY] __ol_ath_attach: 4114: needed_headroom reservation 60 [ 47.138973] wlan: [3398:I:ANY] wlan_cfg80211_init: 10903: Number of 2G channels: 11 [ 47.147324] wlan: [3398:I:ANY] ieee80211_cfg80211_radio_attach: 11009: ic: 0x98a80500, wdev: 0x98a8fc9c, wiphy: 0x94dd0160, netdev: 0x98a80000 [ 47.155879] wlan: [3398:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: 3420: Running with HW mode = 1 [ 47.168168] wlan: [3398:E:QLD] qld_register: 108: Handle or address is NULL [ 47.177752] wlan: [3398:I:ANY] wlan_pdev_operation: 744: num_radios=1, wifi_radios[0].sc = 98a40500_radio_type = 2 [ 47.184377] wlan: [3398:I:ANY] wlan_pdev_operation: 744: num_radios=2, wifi_radios[1].sc = 98a80500_radio_type = 2 [ 47.194844] wlan: [3398:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss) [ 47.205308] MINIDUMP VA .bss start=a1917b80 module=wifi_3_0 [ 47.325614] vmap allocation for size 565248 failed: use vmalloc=<size> to increase size. [ 47.335327] wlan: [3442:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:a007e014 [ 47.335367] wlan: [3442:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:a007e014 [ 47.345922] wlan: [3442:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0: (Atheros/multi-bss) No Direct-Attach chipsets found. [ 51.317299] wlan: [3635:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 0 [ 51.317355] wlan: [3635:I:ANY] ol_ath_ahb_remove: 813: Suspending Target - with disable_intr set :soc0 (sc 9cbbf000) soc=9a7c0500 [ 51.323422] wlan: [3635:I:ANY] wlan_pdev_operation: 847: wlan_pdev_operation: disable_target_intr val is 1 [ 51.335270] wlan: [3635:I:ANY] wlan_pdev_operation: 847: wlan_pdev_operation: disable_target_intr val is 1 [ 51.344793] wlan: [3635:I:ANY] ol_ath_ahb_remove: 816: waiting for target paused event from target :soc0 (sc 9cbbf000) [ 51.354415] wlan: [3635:I:ANY] ol_ath_ahb_remove: 834: AHB Call to nss detach [ 51.365086] wlan: [3635:I:ANY] ol_ath_ahb_remove: 837: Call to nss detach ops 00000000 [ 51.372296] wlan: [3635:E:QLD] qld_register: 108: Handle or address is NULL [ 51.380233] wlan: [3635:I:ANY] osif_wrap_devt_detach: 217: osif wrap dev table detached [ 51.380233] [ 51.387141] wlan: [3635:I:ANY] osif_wrap_detach: 271: osif wrap detached [ 51.387141] [ 51.397002] wlan: [3635:I:ANY] acfg_detach: 3500: acfg_detach Netlink socket released [ 51.405250] wlan: [3635:E:CFR] tgt_cfr_deinit_pdev: 124: Error occurred with exit code 11 [ 51.405250] [ 51.412738] wlan: [3635:E:CFR] cfr_deinitialize_pdev: 157: cfr_deinitialize_pdev status=11 [ 51.412738] [ 51.422302] wlan: [0:I:ANY] ol_ath_pdev_detach: 9457: ol_ath_pdev_detach: remove global_ic[1]..gloabl_ic ptr:a2d7296c [ 51.431939] wlan: [3635:I:ANY] ieee80211_cfg80211_radio_detach: 11042: ieee80211_cfg80211_radio_detach: ic: 0x98a40500, wdev: 0x98a4fc9c, netdev: 0x98a40000 [ 51.533777] PCIe: User of event deregistration is NULL [ 51.563753] wlan: [3635:E:QLD] qld_register: 108: Handle or address is NULL [ 51.563905] wlan: [3635:I:ANY] osif_wrap_devt_detach: 217: osif wrap dev table detached [ 51.563905] [ 51.569528] wlan: [3635:I:ANY] osif_wrap_detach: 271: osif wrap detached [ 51.569528] [ 51.579742] wlan: [3635:E:CFR] tgt_cfr_deinit_pdev: 124: Error occurred with exit code 11 [ 51.579742] [ 51.587334] wlan: [3635:E:CFR] cfr_deinitialize_pdev: 157: cfr_deinitialize_pdev status=11 [ 51.587334] [ 51.596882] wlan: [0:I:ANY] ol_ath_pdev_detach: 9457: ol_ath_pdev_detach: remove global_ic[0]..gloabl_ic ptr:a2d7296c [ 51.606520] wlan: [3635:I:ANY] ieee80211_cfg80211_radio_detach: 11042: ieee80211_cfg80211_radio_detach: ic: 0x98a80500, wdev: 0x98a8fc9c, netdev: 0x98a80000 [ 51.713787] PCIe: User of event deregistration is NULL [ 51.813734] wlan: [3635:I:ANY] ath_lowi_if_netlink_delete: 121: ath_lowi_if_netlink_delete lowi_if_nl is NULL [ 51.813809] wlan: [3635:I:ANY] ol_ath_phyerr_detach: 351: 6ol_ath_phyerr_detach: called [ 51.822627] wlan: [3635:E:WMI] Event id 55 is unavailable [ 51.830854] wlan: [3635:E:WMI] Event id 141 is unavailable [ 51.836085] wlan: [3635:E:WMI] Event id 137 is unavailable [ 51.884749] wlan: [3635:I:ANY] 6ath_ahb_remove [ 51.884749] [ 51.921812] remoteproc remoteproc0: stopped remote processor q6v5-wcss [ 51.921976] glink_core_link_down glink is down [ 51.927313] <SSR>: glink SUBSYS_AFTER_SHUTDOWN cleanup done [ 51.931664] wlan: [3635:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 1 [ 51.937168] remoteproc remoteproc1: stopped remote processor q6v5-m3 [ 51.963686] glink_xprt_close_event [ 51.963745] cnss: QMI WLFW service disconnected, state: 0x7 [ 52.097124] wlan: [3676:E:QLD] qld_list_deinit: 63: Handle NULL [ 52.097236] wlan: [3676:F:SER] wlan_serialization_deinit: 618: deregistered callbacks with obj mgr successfully [ 52.390499] configuring additional NSS pbufs [ 52.400946] additional pbufs of size 3100672 got added to NSS [ 52.453934] qdf_dbg_mask value is invalid [ 52.453954] Using the default module debug levels instead [ 52.456915] qdf_print_ctrl_register: Allocated print control object 0 [ 52.462366] MINIDUMP VA .bss start=7f8ec0c0 module=qdf [ 55.016857] vmap allocation for size 2797568 failed: use vmalloc=<size> to increase size. [ 55.018071] vmap allocation for size 409600 failed: use vmalloc=<size> to increase size. [ 55.086180] wlan: [3729:E:CONFIG] cfg_uint_item_handler: 142: allow_mon_vaps_in_sr= - Invalid format (status 16); Using default 0 [ 55.086260] wlan: [3729:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50 [ 55.097137] MINIDUMP VA .bss start=a2d72640 module=umac******FW ini file not found****** ******No cold_boot_support***** [ 55.574049] vmap allocation for size 1228800 failed: use vmalloc=<size> to increase size. [ 55.574614] vmap allocation for size 217088 failed: use vmalloc=<size> to increase size. [ 55.618787] MINIDUMP VA .bss start=a079a1c0 module=qca_ol [ 55.756589] vmap allocation for size 667648 failed: use vmalloc=<size> to increase size. [ 55.763514] wlan: [3745:I:ANY] =======ol_if_register_wifi3_0========== [ 55.763514] [ 55.763941] wlan: [3745:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:a191789c [ 55.771661] remoteproc remoteproc1: powering up q6v5-m3 [ 55.783195] remoteproc remoteproc1: Booting fw image IPQ6018/m3_fw.mdt, size 6860 [ 55.788053] Sanity check passed for M3 image [ 55.796331] remoteproc remoteproc1: remote processor q6v5-m3 is now up [ 55.800107] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done [ 55.806378] wlan: [3745:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 2 [ 55.811833] remoteproc remoteproc0: powering up q6v5-wcss [ 55.819117] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 55.824928] Sanity check passed for the image [ 56.131394] glink_core_link_up glink is up [ 56.131541] glink_xprt_open_event [ 56.131660] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled [ 56.137808] Subsystem error monitoring/handling services are up [ 56.144348] remoteproc remoteproc0: remote processor q6v5-wcss is now up [ 56.150194] cnss: QMI WLFW service connected, state: 0x1 [ 56.150615] wlan: [3745:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 3 [ 56.162440] cnss: device_id : 65533 mem mode : [1] [ 56.169855] cnss: No board_id entry in device tree [ 56.174183] cnss: BDF location : 0x4abc0000 [ 56.178737] cnss: BDF IPQ6018/bdwlan.bin size 65536 [ 56.183024] cnss: BDF download response , result: 0, err: 0x0 [ 56.187838] cnss: per device BDF location : 0x4abe0000 [ 56.193610] cnss: CALDATA IPQ6018/caldata.bin size 65536 offset 0x20000 [ 56.199737] cnss: BDF download response , result: 0, err: 0x0 [ 56.251156] wlan: [3745:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode [ 56.256788] wlan: [3745:I:ANY] qca_napi_create: 369: qca_napi_create: napi instance 0 created on pipe 4 [ 56.257778] wlan: [3745:I:ANY] __ol_ath_attach: 3520: Allocated soc 94880500 [ 56.267048] wlan: [3745:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000 [ 56.274611] wlan: [3745:I:ANY] osif_nss_wifi_soc_setup: 177: nss-wifili:#1 register wifili function for soc [ 56.285705] wlan: [3745:I:ANY] osif_nss_wifi_soc_setup: 189: nss register id -1 nss config 3 Target Type 19 [ 56.295568] wlan: [3745:I:ANY] __ol_ath_attach: 3746: dev name soc0 [ 56.305472] wlan: [3745:I:ANY] ol_ath_soc_attach: 7059: WMI attached. wmi_handle 9ab58c00 [ 56.311389] wlan: [3745:I:ANY] htc_wmi_init: 6353: htc_wmi_init() HT Create . 9cbda000 [ 56.319697] wlan: [3745:I:ANY] htc_wmi_init: 6360: htc_wmi_init() Skipping BMI Done. [ 56.327541] wlan: [3745:I:ANY] htc_wmi_init: 6417: [htc_wmi_init:6417] host_enable 0 nss_nwifi_offload 0 [ 56.339722] wlan: [3745:I:ANY] ol_target_init_complete: 6535: CDP soc attach success [ 56.345021] wlan: [3745:I:ANY] ol_target_init_complete: 6542: Soc attach success NSS config 0 [ 56.352746] wlan: [3745:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle 9cbda000, ep 2, value 1 [ 56.361299] wlan: [3745:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle 9cbda000, ep 3, value 1 [ 56.371562] wlan: [3412:I:TIF] HE_CAP Info = 1a08010d [ 56.380357] wlan: [3412:I:TIF] Num HW modes = 2 [ 56.385475] wlan: [3412:I:TIF] Num PHY = 2 [ 56.389809] wlan: [3412:I:TIF] Preferred HW Mode = 1 Num Radios = 2 [ 56.393988] wlan: [3412:I:TIF] init_deinit_add_11ax_modes: 1440: Adding 11ax regulatory modes, [ 56.400148] wlan: [3412:I:TIF] init_deinit_add_11ax_modes: 1444: phy_id = 0 wireless modes = 391f9001 [ 56.408835] wlan: [3412:I:TIF] init_deinit_add_11ax_modes: 1440: Adding 11ax regulatory modes, [ 56.418122] wlan: [3412:I:TIF] init_deinit_add_11ax_modes: 1444: phy_id = 1 wireless modes = 680680c [ 56.426718] wlan: [3412:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 1 phy_id = 0 wireless modes = 0 [ 56.436006] wlan: [3412:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 1 phy_id = 1 wireless modes = 0 [ 56.445903] wlan: [3412:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 5 phy_id = 0 wireless modes = 0 [ 56.455799] wlan: [3412:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 5 phy_id = 1 wireless modes = 0 [ 56.465931] wlan: [3412:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 389: dfs_offload 1 [ 56.475595] wlan: [3412:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1579: dfs->dfs_psoc_idx: 0 [ 56.485834] wlan: [3412:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1585: dfs_soc_obj->num_dfs_privs: 1 [ 56.495512] wlan: [3412:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 361: Do not allocate DFS object for 2G, pdev_id = 1 [ 56.514825] wlan: [3412:I:TIF] init_deinit_update_pdev_tgt_info: 1082: CDP PDEV ATTACH success [ 56.522267] wlan: [3412:I:TIF] init_deinit_update_pdev_tgt_info: 1082: CDP PDEV ATTACH success [ 56.627665] wlan: [3412:I:ANY] copy_fw_abi_version_tlv: 6649: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 [ 56.723049] wlan: [3412:I:ANY] dp_peer_map_attach_wifi3: 8661: dp_peer_map_attach_wifi3 max_peers 311, max_ast_index: 1040 [ 56.723049] [ 56.723156] wlan: [3412:I:ANY] ready_extract_init_status_tlv: 8473: ready_extract_init_status_tlv:0 [ 56.734412] wlan: [3745:I:ANY] ol_ath_connect_htc: 1236: WMI is ready [ 56.767807] wlan: [3745:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable [ 56.767973] wlan: [3745:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable [ 56.775561] wlan: [3745:I:ANY] ol_ath_soc_attach: 7146: connect HTC [ 56.784055] wlan: [3745:I:ANY] ol_ath_soc_attach: 7147: bypasswmi : 0 [ 56.790229] wlan: [3745:E:WMI] event handler already registered 0x27001 [ 56.796824] wlan: [3745:E:WMI] event handler already registered 0x27002 [ 56.803259] wlan: [3745:E:WMI] event handler already registered 0x27003 [ 56.809849] wlan: [3745:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable [ 56.816444] wlan: [3745:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable [ 56.825164] wlan: [3745:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable [ 56.833636] wlan: [3745:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable [ 56.842220] wlan: [3745:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable [ 56.850861] wlan: [3745:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable [ 56.859325] wlan: [3745:I:ANY] ol_ath_soc_attach: 7227: ol_ath_soc_attach() UMAC attach . [ 56.868182] wlan: [3745:I:ANY] __ol_ath_attach: 3862: pdev_netdev name wifi0 [ 56.876034] wlan: [3745:I:ANY] __ol_ath_attach: 3908: Skip txrx_pdev_attach_target [ 56.883186] wlan: [3745:I:ANY] __ol_ath_attach: 3933: BURSTING enabled by default [ 56.890965] wlan: [3745:I:ANY] ol_ath_pdev_attach: 8524: interface_id 0 [ 56.898132] wlan: [3745:I:TIF] ol_ath_pdev_regdmn_init: 7388: phy id = 0 Modes supported [ 56.904581] wlan: [3745:I:TIF] ol_ath_pdev_regdmn_init: 7395: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 [ 56.912883] wlan: [3745:I:TIF] ol_ath_pdev_regdmn_init: 7404: Reg cap - phy_id = 0 supp_bnd = 2, modes = 391f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100 [ 56.923149] wlan: [3745:I:ANY] ol_ath_update_wireless_modes: 1351: wireless_modes = 391f9001 before update [ 56.937491] wlan: [3745:I:ANY] ol_ath_update_wireless_modes: 1366: Wireless_modes = 391f9001 after update [ 56.947176] wlan: [3745:I:ANY] ol_ath_update_ext_caps: 1915: 11ax 5G supported case [ 56.956885] wlan: [3745:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed [ 56.964214] wlan: [3745:I:ANY] ieee80211_cbs_init [ 56.970854] wlan: [3745:I:ANY] CBS Inited [ 56.970854] [ 56.975647] wlan: [3745:I:ANY] acfg_attach: 3473: acfg_attach: 3473: Netlink socket created:9a65a000 [ 56.981062] wlan: [3745:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX [ 56.990365] wlan: [3745:I:ANY] ol_ath_stats_attach: 2134: periodic_chan_stats: 1 [ 57.001292] wlan: [3745:I:ANY] wlan_scan_update_channel_list: 1110: num_chan: 25 [ 57.007916] wlan: [0:I:ANY] ol_ath_pdev_attach: 8888: Set global_ic[1], ptr:a2d7296c [ 57.015254] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(997f3104) Enabling DBDC Repeater 1 [ 57.023026] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 57.031144] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(997f3104) is_primary 1 [ 57.039419] wlan: [3745:I:ANY] ol_ath_pdev_attach: 9017: Pdev = 0 Number of peers = 137 [ 57.047978] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 14038: twt enabled. [ 57.047978] [ 57.056037] wlan: [3745:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11 [ 57.056037] [ 57.065219] wlan: [3745:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11 [ 57.065219] [ 57.074914] wlan: [3745:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 560: cfg block channel list is empty [ 57.084293] wlan: [3745:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3451: pdev_idx = 0 tx_desc_limit = 8192 [ 57.093874] wlan: [3745:I:ANY] osif_wrap_attach: 239: osif wrap attached [ 57.093874] [ 57.103775] wlan: [3745:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done [ 57.103775] [ 57.111795] wlan: [3745:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =997f7800 ic->ic_wrap_com=997f7800 &wrap_com->wc_devt=997f7800 [ 57.111795] [ 57.121051] wlan: [3745:I:ANY] __ol_ath_attach: 4114: needed_headroom reservation 60 [ 57.135409] wlan: [3745:I:ANY] ol_ath_enable_fraglist: 3010: Enabled Fraglist bit for the radio wifi0 features 41 [ 57.143269] wlan: [3745:I:ANY] wlan_cfg80211_init: 10915: Number of 5G channels: 25 [ 57.153781] wlan: [3745:I:ANY] ieee80211_cfg80211_radio_attach: 11009: ic: 0x949a0500, wdev: 0x949afc9c, wiphy: 0x98108160, netdev: 0x949a0000 [ 57.162527] wlan: [3745:I:ANY] __ol_ath_attach: 3862: pdev_netdev name wifi1 [ 57.173982] wlan: [3745:I:ANY] __ol_ath_attach: 3908: Skip txrx_pdev_attach_target [ 57.181238] wlan: [3745:I:ANY] __ol_ath_attach: 3933: BURSTING enabled by default [ 57.188721] wlan: [3745:I:ANY] ol_ath_pdev_attach: 8524: interface_id 1 [ 57.196199] wlan: [3745:I:TIF] ol_ath_pdev_regdmn_init: 7388: phy id = 1 Modes supported [ 57.202742] wlan: [3745:I:TIF] ol_ath_pdev_regdmn_init: 7395: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 [ 57.210880] wlan: [3745:I:TIF] ol_ath_pdev_regdmn_init: 7404: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 [ 57.221136] wlan: [3745:I:ANY] ol_ath_update_wireless_modes: 1351: wireless_modes = 680680c before update [ 57.235516] wlan: [3745:I:ANY] ol_ath_update_wireless_modes: 1366: Wireless_modes = 680680c after update [ 57.245077] wlan: [3745:I:ANY] ol_ath_update_ext_caps: 1923: 11ax 2G supported case [ 57.254835] wlan: [3745:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed [ 57.262047] wlan: [3745:I:ANY] ieee80211_cbs_init [ 57.268577] wlan: [3745:I:ANY] CBS Inited [ 57.268577] [ 57.273433] wlan: [3745:I:ANY] acfg_attach: 3448: Offload using existing sock 9a65a000 [ 57.279075] wlan: [3745:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX [ 57.286811] wlan: [3745:I:ANY] ol_ath_stats_attach: 2134: periodic_chan_stats: 1 [ 57.297418] wlan: [3745:I:ANY] wlan_scan_update_channel_list: 1110: num_chan: 11 [ 57.304575] wlan: [0:I:ANY] ol_ath_pdev_attach: 8888: Set global_ic[2], ptr:a2d7296c [ 57.311863] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(997f3404) Enabling DBDC Repeater 1 [ 57.319637] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 57.327755] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(997f3404) is_primary 0 [ 57.336038] wlan: [3745:I:ANY] ol_ath_pdev_attach: 9017: Pdev = 1 Number of peers = 137 [ 57.344297] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 14038: twt enabled. [ 57.344297] [ 57.352935] wlan: [3745:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11 [ 57.352935] [ 57.361827] wlan: [3745:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11 [ 57.361827] [ 57.371493] wlan: [3745:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 560: cfg block channel list is empty [ 57.380948] wlan: [3745:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3451: pdev_idx = 1 tx_desc_limit = 8192 [ 57.390488] wlan: [3745:I:ANY] osif_wrap_attach: 239: osif wrap attached [ 57.390488] [ 57.400355] wlan: [3745:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done [ 57.400355] [ 57.408461] wlan: [3745:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =997dc400 ic->ic_wrap_com=997dc400 &wrap_com->wc_devt=997dc400 [ 57.408461] [ 57.417658] wlan: [3745:I:ANY] __ol_ath_attach: 4114: needed_headroom reservation 60 [ 57.432018] wlan: [3745:I:ANY] ol_ath_enable_fraglist: 3010: Enabled Fraglist bit for the radio wifi1 features 41 [ 57.439863] wlan: [3745:I:ANY] wlan_cfg80211_init: 10903: Number of 2G channels: 11 [ 57.450226] wlan: [3745:I:ANY] ieee80211_cfg80211_radio_attach: 11009: ic: 0x99180500, wdev: 0x9918fc9c, wiphy: 0x98119960, netdev: 0x99180000 [ 57.458670] wlan: [3745:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: 3420: Running with HW mode = 1 [ 57.471177] wlan: [3745:E:QLD] qld_register: 108: Handle or address is NULL [ 57.481060] wlan: [3745:I:ANY] wlan_pdev_operation: 744: num_radios=1, wifi_radios[0].sc = 949a0500_radio_type = 2 [ 57.487687] wlan: [3745:I:ANY] wlan_pdev_operation: 744: num_radios=2, wifi_radios[1].sc = 99180500_radio_type = 2 [ 57.498162] wlan: [3745:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss) [ 57.508644] MINIDUMP VA .bss start=a1917b80 module=wifi_3_0 [ 57.627517] vmap allocation for size 565248 failed: use vmalloc=<size> to increase size. [ 57.637231] wlan: [3783:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:a007e014 [ 57.637270] wlan: [3783:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:a007e014 [ 57.647825] wlan: [3783:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0: (Atheros/multi-bss) acfg_tool: Issuing blocking call to wait for events [ 58.444794] Not a bridge device, or device not found: br-lan dnicfg: service running dnicfg: service init done [dniopsdb] opsdb_agent.c:55 OPSDB AGENT: AGENT IS STARTING NOW!!! [dnirpcd] rpcd_agent.c:55 RPCD AGENT: AGENT IS STARTING NOW!!! [ 65.429873] xt_CT: netfilter: NOTRACK target is deprecated, use CT instead or upgrade iptables [ 66.404073] vmap allocation for size 839680 failed: use vmalloc=<size> to increase size. [ 66.428576] ECM init [ 66.428626] ECM database jhash random seed: 0x6a001ea2 [ 66.430920] ECM init complete [ 66.439215] ECM PCC circle INIT [ 66.439265] ECM PCC registrant REGISTERED [ 66.730458] get wan ifname eth1 [ 66.730477] Loading DNI-ENET driver [ 66.733596] register ipv6 passthrough receive handle function. [ 67.788815] device eth2.4093 entered promiscuous mode [ 67.788841] device eth2 entered promiscuous mode [ 67.795856] IPv6: ADDRCONF(NETDEV_UP): br-guest: link is not ready [ 67.810302] device eth3.4093 entered promiscuous mode [ 67.810332] device eth3 entered promiscuous mode [ 67.825786] device eth4.4093 entered promiscuous mode [ 67.825813] device eth4 entered promiscuous mode [ 67.839842] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 67.844923] br-lan: port 2(eth3) entered forwarding state [ 67.844985] br-lan: port 2(eth3) entered forwarding state [ 67.850794] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 67.858831] br-lan: port 3(eth4) entered forwarding state [ 67.862099] br-lan: port 3(eth4) entered forwarding state [ 67.876099] device eth1 entered promiscuous mode [ 67.878932] br-wan: port 1(eth1) entered forwarding state [ 67.879861] br-wan: port 1(eth1) entered forwarding state Run BASE_BOARD net-scan config... [ 68.773740] br-lan: port 2(eth3) entered disabled state [ 68.774051] br-lan: port 3(eth4) entered disabled state [ 68.778145] br-wan: port 1(eth1) entered disabled state The attached devices demo is Running ... Before lock open call 6871 Came before wd_pid process API pid is 6871 and wd_pid is -1 Came after wd_pid process API pid is 6871 and wd_pid is -1 Mounting secure partition Started a watchdog for pid [6871]/usr/sbin/lighttpd Started a watchdog for pid [6871]/usr/sbin/lighttpd inside while loopMount secure storage API pid is 6871 [ 70.995327] Creating 1 MTD partitions on "virtual": [ 70.995354] 0x000000000000-0x000000a00000 : "virtual" [ 71.000662] block2mtd: mtd0: [virtual] erase_size = 128KiB [131072] [ 71.005355] ubi2: attaching mtd37 Mount secure storage API-2 pid is 6871 [ 71.070328] ubi2: scanning is finished [ 71.078377] ubi2: attached mtd37 (name "virtual", size 10 MiB) [ 71.078404] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 130944 bytes [ 71.083152] ubi2: min./max. I/O unit sizes: 1/4096, sub-page size 1 [ 71.090088] ubi2: VID header offset: 64 (aligned 64), data offset: 128 [ 71.096299] ubi2: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 [ 71.102748] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 71.108588] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2657770371 [ 71.115917] ubi2: available PEBs: 26, total reserved PEBs: 54, PEBs reserved for bad PEB handling: 0 [ 71.125225] ubi2: background thread "ubi_bgt2d" started, PID 6928 UBI device number 2, total 80 LEBs, available 26 LEBs [ 71.140454] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 6931 [ 71.250965] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "virtual_part" [ 71.250997] UBIFS (ubi2:0): LEB size: 130944 bytes (127 KiB), min./max. I/O unit sizes: 8 bytes/4096 bytes [ 71.257846] UBIFS (ubi2:0): FS size: 5237760 bytes (4 MiB, 40 LEBs), journal size 1047553 bytes (0 MiB, 6 LEBs) [ 71.267512] UBIFS (ubi2:0): reserved for root: 247392 bytes (241 KiB) [ 71.277751] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID B0AC7439-F8FE-47E6-8757-1107DD272324, small LPT model Secure Storage: Mount success after lock release err_next open call 6871 after lock release err open call 6871 before lock close call 6871 inside lock clode call 6871 Secure Storage: No other process is using Secure Storage - Unmount partition [ 71.858457] UBIFS (ubi2:0): un-mount UBI device 2 [ 71.858496] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops Secure Storage: Unmount start [ 71.924220] ubi2: detaching mtd37 [ 71.924583] ubi2: mtd37 is detached [ 72.124017] block2mtd: mtd0: [] removed Secure Storage: Unmount success Kill watchdog close call 6871 after lock release err close call 6871 after lock release err_next close call 6871 Before lock open call 6871 Came before wd_pid process API pid is 6871 and wd_pid is -1 Came after wd_pid process API pid is 6871 and wd_pid is -1 Mounting secure partition Mount secure storage API pid is 6871 Started a watchdog for pid [6871]/usr/sbin/lighttpd Started a watchdog for pid [6871]/usr/sbin/lighttpd inside while loop[ 72.299407] Creating 1 MTD partitions on "virtual": [ 72.299434] 0x000000000000-0x000000a00000 : "virtual" [ 72.314045] block2mtd: mtd0: [virtual] erase_size = 128KiB [131072] [ 72.315167] ubi2: attaching mtd37 Mount secure storage API-2 pid is 6871 [ 72.379048] ubi2: scanning is finished [ 72.387066] ubi2: attached mtd37 (name "virtual", size 10 MiB) [ 72.387091] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 130944 bytes [ 72.391822] ubi2: min./max. I/O unit sizes: 1/4096, sub-page size 1 [ 72.398752] ubi2: VID header offset: 64 (aligned 64), data offset: 128 [ 72.404847] ubi2: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 [ 72.411573] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 72.417264] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2657770371 [ 72.424597] ubi2: available PEBs: 26, total reserved PEBs: 54, PEBs reserved for bad PEB handling: 0 [ 72.433869] ubi2: background thread "ubi_bgt2d" started, PID 7063 UBI device number 2, total 80 LEBs, available 26 LEBs [ 72.449167] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 7066 [ 72.559401] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "virtual_part" [ 72.559433] UBIFS (ubi2:0): LEB size: 130944 bytes (127 KiB), min./max. I/O unit sizes: 8 bytes/4096 bytes [ 72.566587] UBIFS (ubi2:0): FS size: 5237760 bytes (4 MiB, 40 LEBs), journal size 1047553 bytes (0 MiB, 6 LEBs) [ 72.575948] UBIFS (ubi2:0): reserved for root: 247392 bytes (241 KiB) [ 72.585866] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID B0AC7439-F8FE-47E6-8757-1107DD272324, small LPT model Secure Storage: Mount success after lock release err_next open call 6871 after lock release err open call 6871 before lock close call 6871 inside lock clode call 6871 Secure Storage: No other process is using Secure Storage - Unmount partition [ 73.045847] UBIFS (ubi2:0): un-mount UBI device 2 [ 73.045884] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops Secure Storage: Unmount start [ 73.094278] ubi2: detaching mtd37 [ 73.094670] ubi2: mtd37 is detached [ 73.274045] block2mtd: mtd0: [rtual/mtd/mtd37/mtdblock37] removed Secure Storage: Unmount success Kill watchdog close call 6871 after lock release err close call 6871 after lock release err_next close call 6871 Before lock open call 7220 Came before wd_pid process API pid is 7220 and wd_pid is -1 Came after wd_pid process API pid is 7220 and wd_pid is -1 Mounting secure partition Mount secure storage API pid is 7220 Started a watchdog for pid [7220]/usr/sbin/hash-data Started a watchdog for pid [7220]/usr/sbin/hash-data inside while loop[ 73.492159] Creating 1 MTD partitions on "virtual": [ 73.492186] 0x000000000000-0x000000a00000 : "virtual" [ 73.496802] block2mtd: mtd0: [virtual] erase_size = 128KiB [131072] [ 73.502113] ubi2: attaching mtd37 Mount secure storage API-2 pid is 7220 [ 73.565450] ubi2: scanning is finished [ 73.573333] ubi2: attached mtd37 (name "virtual", size 10 MiB) [ 73.573359] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 130944 bytes [ 73.578078] ubi2: min./max. I/O unit sizes: 1/4096, sub-page size 1 [ 73.584922] ubi2: VID header offset: 64 (aligned 64), data offset: 128 [ 73.591072] ubi2: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 [ 73.597678] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 73.603488] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2657770371 [ 73.610795] ubi2: available PEBs: 26, total reserved PEBs: 54, PEBs reserved for bad PEB handling: 0 [ 73.620093] ubi2: background thread "ubi_bgt2d" started, PID 7235 UBI device number 2, total 80 LEBs, available 26 LEBs [ 73.633834] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 7238 [ 73.749439] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "virtual_part" [ 73.749471] UBIFS (ubi2:0): LEB size: 130944 bytes (127 KiB), min./max. I/O unit sizes: 8 bytes/4096 bytes [ 73.756426] UBIFS (ubi2:0): FS size: 5237760 bytes (4 MiB, 40 LEBs), journal size 1047553 bytes (0 MiB, 6 LEBs) [ 73.765950] UBIFS (ubi2:0): reserved for root: 247392 bytes (241 KiB) [ 73.775928] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID B0AC7439-F8FE-47E6-8757-1107DD272324, small LPT model Secure Storage: Mount success after lock release err_next open call 7220 after lock release err open call 7220 before lock close call 7220 inside lock clode call 7220 Secure Storage: No other process is using Secure Storage - Unmount partition [ 74.048205] UBIFS (ubi2:0): un-mount UBI device 2 [ 74.048251] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops Secure Storage: Unmount start [ 74.084122] ubi2: detaching mtd37 [ 74.084686] ubi2: mtd37 is detached [ 74.244260] block2mtd: mtd0: [] removed Secure Storage: Unmount success Kill watchdog close call 7220 after lock release err close call 7220 after lock release err_next close call 7220 hyd: ERROR: Bridge is not attached; start hyfi-bridging first [wsplcd]WLAN interface ath11 is not ready hyd: some interface(s) are not ready. hyd: ERROR: Private network interface checking failed watchquagga[8591]: ripd state -> up : connect succeeded udhcp server start guest vlan udhcp server start traffic_meter start ****************Start of ping-netgear******************** ****************Start of get-internet-status******************** Config commit is not allowed during booting [ntpclient] getRaCloudTime, Query... led_state_event.sh: Input LED Event is NO_INTERNET [soap_checkfw]curl_expect_time_hm=6:33 [SOAPClient]{CONSOLE}{2024-11-15 12:52:25}[agent.c:773] New soap mechanism is on ! [Orbi]***boot done*** ****************Start of ping-netgear******************** Done! ****************Start of get-internet-status******************** led_state_event.sh: Input LED Event is NO_INTERNET control-firmware will be Running when Internet status is UP !!! AUTO FW CHECK: power cycle [Daily Check FW]count time:0 whc (repacd): starting WHC auto-configuration whc (repacd): Managed network: lan whc (repacd): Device type: RE whc (repacd): Initialized lan VAPs whc (repacd): Auto create VAPs disabled whc (repacd): Auto create VAPs disabled whc (repacd): Auto create VAPs disabled whc (repacd): Auto create VAPs disabled whc (repacd): Using SON mode for GW Connected AP whc (repacd): Set radio wifi0 to QWrap Enabled=0 whc (repacd): Set iface FhAp2 to RootDistance=0 whc (repacd): Set iface FhAp5 to RootDistance=0 whc (repacd): Set iface SM0 to RootDistance=0 whc (repacd): Set iface SM1 to RootDistance=0 whc (repacd): Set iface BhAp2 to RootDistance=0 whc (repacd): Set iface BhAp5 to RootDistance=0 whc (repacd): Set iface Guest2 to RootDistance=0 whc (repacd): Set iface Guest5 to RootDistance=0 whc (repacd): Restarting network stack... [ 86.296144] device eth2.4093 left promiscuous mode [ 86.296432] br-guest: port 1(eth2.4093) entered disabled state [ 86.303415] IPv6: ADDRCONF(NETDEV_UP): eth2.4093: link is not ready [ 86.363822] device eth3.4093 left promiscuous mode [ 86.363942] br-guest: port 2(eth3.4093) entered disabled state [ 86.370852] IPv6: ADDRCONF(NETDEV_UP): eth3.4093: link is not ready [ 86.423923] device eth4.4093 left promiscuous mode [ 86.424059] br-guest: port 3(eth4.4093) entered disabled state [ 86.431180] IPv6: ADDRCONF(NETDEV_UP): eth4.4093: link is not ready [ 86.550863] device eth2.4093 entered promiscuous mode [ 86.556643] device eth3.4093 entered promiscuous mode [ 86.562197] device eth4.4093 entered promiscuous mode [ 86.564523] IPv6: ADDRCONF(NETDEV_UP): br-guest: link is not ready acfg_tool: Issuing blocking call to wait for events acfg_tool: Issuing blocking call to wait for events qcawifi qcawificfg80211 disable radio wifi1 ****************End of get-internet-status******************** qcawifi qcawificfg80211 disable radio wifi0 acfg_tool: Issuing blocking call to wait for events acfg_tool: Issuing blocking call to wait for events qcawifi qcawificfg80211: enable radio wifi1 [ 88.551778] wlan: [11375:I:ANY] wlan_scan_update_channel_list: 1110: num_chan: 13 [ 88.551881] wlan: [11375:I:ANY] number of channels: 2G = 13 5G = 0 [ 88.782401] wlan: [11414:I:ANY] wlan_cfg80211_set_hwaddr: 6154: wlan_cfg80211_set_hwaddr :9c:c9:eb:d8:7b:e5 ret: 0 [ 88.822436] wlan: [11416:I:ANY] ol_ath_set_config_param: 1591: set TXBF_SND_PERIOD: value 100 wmi_status 0 [ 88.939668] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(997f3404) Enabling DBDC Repeater 0 [ 88.939735] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 88.946877] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 88.955209] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 89.043948] wlan: [0:I:ANY] ol_ath_set_config_param: 2342: Disconnect_timeout value: 10 [ 89.109337] wlan: [0:I:ANY] ol_ath_set_config_param: 2348: Reconfiguration_timeout value:60 ****************End of get-internet-status******************** number of vifs: BhAp2 FhAp2 Guest2 SM0 [ 89.635913] wlan: [11547:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath1 : clone params: 0x00000001 [ 89.635980] wlan: [11547:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create 9c:c9:eb:d8:7b:e5 [ 89.647089] wlan: [11547:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation [ 89.655244] wlan: [11547:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x99180500, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 89.655244] [ 89.664216] wlan: [11547:I:ANY] ol_ath_vap_set_param: 1111: Setting SGI value: 1 [ 89.676629] wlan: [11547:I:ANY] ol_ath_vap_set_param: 2139: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 89.684033] wlan: [11547:I:ANY] ol_ath_vap_set_param: 2149: he_bf_cap=0x3b [ 89.697698] wlan: [11547:I:ANY] ol_ath_vap_set_param: 2164: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 89.704398] wlan: [11547:I:ANY] MBO Initialized [ 89.718428] wlan: [11547:I:ANY] OCE Initialized [ 89.722777] wlan: [11547:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 40 nss_id -1 [ 89.727414] wlan: [11547:I:ANY] NSS radio_if 29 [ 89.737172] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0 [ 89.741438] wlan: [11547:I:ANY] osif_nss_ol_vap_create: 1376: vap create 95133500 : if_num 40 [ 89.749816] wlan: [11547:I:ANY] wlan_vap_create: 1636: exit [ 89.758557] wlan: [11547:E:ANY] Smart Antenna is not supported [ 89.764170] dp_peer_add_ast: pdevid: 1 vdev: 0 ast_entry->type: 1 flags: 0x0 peer_mac: 00:00:00:00:00:00 peer: 96000000 mac 9c:c9:eb:d8:7b:e5 [ 89.769934] wlan: [11547:E:ANY] Smart Antenna is not supported [ 89.782675] wlan: [11547:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 89.788438] wlan: [11547:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 89.798612] wlan: [11547:I:ANY] VAP device ath1 created osifp: (95133500) os_if: (97d58000) [ 89.811910] device ath1.4093 entered promiscuous mode [ 89.811937] device ath1 entered promiscuous mode [ 89.819566] br-guest: port 4(ath1.4093) entered forwarding state [ 89.821449] br-guest: port 4(ath1.4093) entered forwarding state [ 89.828552] IPv6: ADDRCONF(NETDEV_CHANGE): br-guest: link becomes ready [ 89.839384] device ath1.4094 entered promiscuous mode [ 89.839986] br-lan: port 4(ath1.4094) entered forwarding state [ 89.845011] br-lan: port 4(ath1.4094) entered forwarding state [ 91.047191] wlan: [5103:I:ANY] wlan_cfg80211_do_acs: 3497: vap-0(ath1):ACS Params [ 91.047226] wlan: [5103:I:ANY] wlan_cfg80211_do_acs: 3500: ht_enabled:1|ht40_enabled:0|vht_enabled:0|hw_mode:13|chwidth:20| [ 91.053777] wlan: [5103:I:ANY] ieee80211_autoselect_infra_bss_channel: 4930: ACS started: vap:0x97d58000 [ 91.208787] wlan: [11835:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 91.238999] wlan: [11841:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath11 : clone params: 0x00000001 [ 91.239079] wlan: [11841:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create a2:c9:eb:d8:7b:e5 [ 91.250487] wlan: [11841:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation [ 91.258607] wlan: [11841:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x99180500, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 91.258607] [ 91.267408] wlan: [11841:I:ANY] ol_ath_vap_set_param: 1111: Setting SGI value: 1 [ 91.279825] wlan: [11841:I:ANY] ol_ath_vap_set_param: 2139: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 91.287122] wlan: [11841:I:ANY] ol_ath_vap_set_param: 2149: he_bf_cap=0x3b [ 91.300981] wlan: [11841:I:ANY] ol_ath_vap_set_param: 2164: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 91.307463] wlan: [11841:I:ANY] MBO Initialized [ 91.321664] wlan: [11841:I:ANY] OCE Initialized [ 91.325975] wlan: [11841:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 41 nss_id -1 [ 91.330468] wlan: [11841:I:ANY] NSS radio_if 29 [ 91.340292] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0 [ 91.344697] wlan: [11841:I:ANY] osif_nss_ol_vap_create: 1376: vap create 95789500 : if_num 41 [ 91.352968] wlan: [11841:I:ANY] wlan_vap_create: 1636: exit [ 91.361694] wlan: [11841:E:ANY] Smart Antenna is not supported [ 91.367280] dp_peer_add_ast: pdevid: 1 vdev: 1 ast_entry->type: 1 flags: 0x0 peer_mac: 00:00:00:00:00:00 peer: 96040000 mac a2:c9:eb:d8:7b:e5 [ 91.373272] wlan: [11841:E:ANY] Smart Antenna is not supported [ 91.385906] wlan: [11841:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 91.391588] wlan: [11841:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 91.402002] wlan: [11841:I:ANY] VAP device ath11 created osifp: (95789500) os_if: (97b48000) [ 91.813640] br-guest: port 4(ath1.4093) entered forwarding state [ 91.843636] br-lan: port 4(ath1.4094) entered forwarding state [ 92.505856] device ath11 entered promiscuous mode [ 92.505965] br-lan: port 5(ath11) entered forwarding state [ 92.509580] br-lan: port 5(ath11) entered forwarding state [ 92.515775] wlan: [5103:I:ANY] wlan_cfg80211_do_acs: 3497: vap-1(ath11):ACS Params [ 92.520450] wlan: [5103:I:ANY] wlan_cfg80211_do_acs: 3500: ht_enabled:1|ht40_enabled:0|vht_enabled:0|hw_mode:13|chwidth:20| [ 92.528333] wlan: [5103:I:ANY] ieee80211_autoselect_infra_bss_channel: 4930: ACS started: vap:0x97b48000 [ 92.705067] wlan: [11996:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 92.705106] wlan: [11996:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 92.744260] wlan: [12002:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath12 : clone params: 0x00000001 [ 92.744330] wlan: [12002:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create a6:c9:eb:d8:7b:e5 [ 92.755654] wlan: [12002:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation [ 92.763671] wlan: [12002:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x99180500, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 92.763671] [ 92.772555] wlan: [12002:I:ANY] ol_ath_vap_set_param: 1111: Setting SGI value: 1 [ 92.784951] wlan: [12002:I:ANY] ol_ath_vap_set_param: 2139: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 92.792321] wlan: [12002:I:ANY] ol_ath_vap_set_param: 2149: he_bf_cap=0x3b [ 92.805963] wlan: [12002:I:ANY] ol_ath_vap_set_param: 2164: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 92.812660] wlan: [12002:I:ANY] MBO Initialized [ 92.826783] wlan: [12002:I:ANY] OCE Initialized [ 92.831197] wlan: [12002:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 42 nss_id -1 [ 92.835731] wlan: [12002:I:ANY] NSS radio_if 29 [ 92.845472] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0 [ 92.849869] wlan: [12002:I:ANY] osif_nss_ol_vap_create: 1376: vap create 95132500 : if_num 42 [ 92.858221] wlan: [12002:I:ANY] wlan_vap_create: 1636: exit [ 92.866873] wlan: [12002:E:ANY] Smart Antenna is not supported [ 92.872491] dp_peer_add_ast: pdevid: 1 vdev: 2 ast_entry->type: 1 flags: 0x0 peer_mac: 00:00:00:00:00:00 peer: 96080000 mac a6:c9:eb:d8:7b:e5 [ 92.878340] wlan: [12002:E:ANY] Smart Antenna is not supported [ 92.891091] wlan: [12002:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 92.896825] wlan: [12002:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 92.906988] wlan: [12002:I:ANY] VAP device ath12 created osifp: (95132500) os_if: (960c8000) [ 93.955719] device ath12 entered promiscuous mode [ 93.955839] br-guest: port 5(ath12) entered forwarding state [ 93.959449] br-guest: port 5(ath12) entered forwarding state [ 93.966078] wlan: [5103:I:ANY] wlan_cfg80211_do_acs: 3497: vap-2(ath12):ACS Params [ 93.970919] wlan: [5103:I:ANY] wlan_cfg80211_do_acs: 3500: ht_enabled:1|ht40_enabled:0|vht_enabled:0|hw_mode:13|chwidth:20| [ 93.978546] wlan: [5103:I:ANY] ieee80211_autoselect_infra_bss_channel: 4930: ACS started: vap:0x960c8000 [ 94.178632] wlan: [12340:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 94.178670] wlan: [12340:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 94.188268] wlan: [12340:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 94.229651] wlan: [12346:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath13 : clone params: 0x00005001 [ 94.229718] wlan: [12346:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create aa:c9:eb:d8:7b:e5 [ 94.241134] wlan: [12346:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation [ 94.249095] wlan: [12346:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x99180500, opmode=IEEE80211_M_HOSTAP, flags=0x5001 [ 94.249095] [ 94.258010] wlan: [12346:I:ANY] ol_ath_vap_set_param: 1111: Setting SGI value: 1 [ 94.270880] wlan: [12346:I:ANY] ol_ath_vap_set_param: 2139: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 94.278317] wlan: [12346:I:ANY] ol_ath_vap_set_param: 2149: he_bf_cap=0x3b [ 94.291901] wlan: [12346:I:ANY] ol_ath_vap_set_param: 2164: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 94.298557] wlan: [12346:I:ANY] MBO Initialized [ 94.312970] wlan: [12346:I:ANY] OCE Initialized [ 94.316985] wlan: [12346:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 43 nss_id -1 [ 94.321467] wlan: [12346:I:ANY] NSS radio_if 29 [ 94.331551] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0 [ 94.335579] wlan: [12346:I:ANY] osif_nss_ol_vap_create: 1376: vap create 97886500 : if_num 43 [ 94.344008] wlan: [12346:I:ANY] wlan_vap_create: 1636: exit [ 94.352520] wlan: [12346:E:ANY] Smart Antenna is not supported [ 94.358265] dp_peer_add_ast: pdevid: 1 vdev: 3 ast_entry->type: 1 flags: 0x0 peer_mac: 00:00:00:00:00:00 peer: 96140000 mac aa:c9:eb:d8:7b:e5 [ 94.364021] wlan: [12346:E:ANY] Smart Antenna is not supported [ 94.376742] wlan: [12346:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 94.382467] wlan: [12346:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 94.392439] wlan: [12346:I:ANY] VAP device ath13 created osifp: (97886500) os_if: (97fe8000) HWMODE: 11NGHT40 [ 94.503661] br-lan: port 5(ath11) entered forwarding state [ 94.599956] wlan: [12443:I:ANY] ieee80211_ucfg_set_freq_internal: 433: vap = 3, acs in progress, return [ 94.658399] wlan: [12463:I:ANY] DES SSID SET=SM_0 [ 94.763087] wlan: [12472:I:ANY] ieee80211_ucfg_set_freq_internal: 433: vap = 3, acs in progress, return [ 95.497931] wlan: [5103:I:ANY] ieee80211_autoselect_infra_bss_channel: 4930: ACS started: vap:0x97fe8000 [ 95.625316] wlan: [12583:I:ANY] ieee80211_autoselect_infra_bss_channel: 4930: ACS started: vap:0x97fe8000 qcawifi qcawificfg80211: enable radio wifi0 [ 95.953658] br-guest: port 5(ath12) entered forwarding state [ 96.498478] wlan: [12902:I:ANY] wlan_scan_update_channel_list: 1110: num_chan: 19 [ 96.498740] wlan: [12902:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 1445: freq=58 [ 96.504977] wlan: [12902:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 1445: freq=106 [ 96.513099] wlan: [12902:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 1445: freq=122 [ 96.522405] wlan: [12902:I:ANY] wlan_scan_update_channel_list: 1110: num_chan: 19 [ 96.530357] wlan: [12902:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 1445: freq=58 [ 96.537652] wlan: [12902:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 1445: freq=106 [ 96.545763] wlan: [12902:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 1445: freq=122 [ 96.554516] wlan: [12902:I:ANY] number of channels: 2G = 0 5G = 19 [ 96.562867] wlan: [11057:I:ANY] ol_acfg_handle_wifi_ioctl: 417: ol_acfg_handle_wifi_ioctl: req->cmd=75 not valid for radio interface, it's for VAP Error received: -22 Could not send NL command [ 96.786221] wlan: [12919:I:ANY] wlan_cfg80211_set_hwaddr: 6154: wlan_cfg80211_set_hwaddr :9c:c9:eb:d8:7b:e6 ret: 0 [ 96.827180] wlan: [12922:I:ANY] ol_ath_set_config_param: 1591: set TXBF_SND_PERIOD: value 100 wmi_status 0 [ 96.953271] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(997f3104) Enabling DBDC Repeater 0 [ 96.953367] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 96.960499] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 96.968813] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 97.040634] wlan: [0:I:ANY] ol_ath_set_config_param: 2342: Disconnect_timeout value: 10 [ 97.084513] wlan: [0:I:ANY] ol_ath_set_config_param: 2348: Reconfiguration_timeout value:60 number of vifs: BhAp5 FhAp5 Guest5 SM1 [ 97.510591] wlan: [13055:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath0 : clone params: 0x00000001 [ 97.510658] wlan: [13055:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create 9c:c9:eb:d8:7b:e6 [ 97.521709] wlan: [13055:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation [ 97.530105] wlan: [13055:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x949a0500, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 97.530105] [ 97.538970] wlan: [13055:I:ANY] ol_ath_vap_set_param: 1111: Setting SGI value: 1 [ 97.551213] wlan: [13055:I:ANY] ol_ath_vap_set_param: 2139: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 97.558767] wlan: [13055:I:ANY] ol_ath_vap_set_param: 2149: he_bf_cap=0x3b [ 97.572245] wlan: [13055:I:ANY] ol_ath_vap_set_param: 2164: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 97.578966] wlan: [13055:I:ANY] MBO Initialized [ 97.593099] wlan: [13055:I:ANY] OCE Initialized [ 97.597484] wlan: [13055:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 44 nss_id -1 [ 97.601977] wlan: [13055:I:ANY] NSS radio_if 28 [ 97.611970] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0 [ 97.616157] wlan: [13055:I:ANY] osif_nss_ol_vap_create: 1376: vap create 94c35500 : if_num 44 [ 97.624493] wlan: [13055:I:ANY] wlan_vap_create: 1636: exit [ 97.633150] wlan: [13055:E:ANY] Smart Antenna is not supported [ 97.638817] dp_peer_add_ast: pdevid: 0 vdev: 4 ast_entry->type: 1 flags: 0x0 peer_mac: 00:00:00:00:00:00 peer: 96100000 mac 9c:c9:eb:d8:7b:e6 [ 97.644605] wlan: [13055:E:ANY] Smart Antenna is not supported [ 97.657369] wlan: [13055:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 97.663134] wlan: [13055:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 97.671950] wlan: [3742:I:ANY] ******** ACS report ******** [ 97.672894] wlan: [13055:I:ANY] VAP device ath0 created osifp: (94c35500) os_if: (97ff8000) [ 97.678436] device ath0.4093 entered promiscuous mode [ 97.678439] device ath0 entered promiscuous mode [ 97.678559] br-guest: port 6(ath0.4093) entered forwarding state [ 97.678581] br-guest: port 6(ath0.4093) entered forwarding state [ 97.684272] device ath0.4094 entered promiscuous mode [ 97.684389] br-lan: port 6(ath0.4094) entered forwarding state [ 97.684415] br-lan: port 6(ath0.4094) entered forwarding state [ 97.724363] wlan: [3742:I:ANY] Channel | BSS | minrssi | maxrssi | NF | Ch load | spect load | sec_chan | SR bss | SR load | Ch Avil | Chan eff | NearBSS | Med BSS | Far BSS | Eff BSS | chan grade [ 97.730187] wlan: [3742:I:ANY] ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- [ 97.747834] wlan: [3742:I:ANY] 2412( 1) 6 25 33 -107 12 0 0 0 0 100 0 0 1 5 0 100 [ 97.765478] wlan: [3742:I:ANY] 2417( 2) 0 0 0 -108 1 0 0 0 0 29 291 0 0 0 343 100 [ 97.782668] wlan: [3742:I:ANY] 2422( 3) 0 0 0 -107 6 0 0 0 0 48 480 0 0 0 208 100 [ 97.800028] wlan: [3742:I:ANY] 2427( 4) 1 13 13 -107 15 0 0 0 0 54 546 0 0 1 183 100 [ 97.817395] wlan: [3742:I:ANY] 2432( 5) 0 0 0 -107 6 0 0 0 0 38 381 0 0 0 262 100 [ 97.834733] wlan: [3742:I:ANY] 2437( 6) 5 15 19 -107 12 0 0 0 0 35 355 0 0 5 281 100 [ 97.852089] wlan: [3742:I:ANY] 2442( 7) 2 14 15 -105 13 0 0 0 0 31 317 0 0 2 315 100 [ 97.869470] wlan: [3742:I:ANY] 2447( 8) 0 0 0 -105 26 0 0 0 0 52 526 0 0 0 190 100 [ 97.886842] wlan: [3742:I:ANY] 2452( 9) 0 0 0 -105 32 0 0 0 1 68 689 0 0 0 145 100 [ 97.904174] wlan: [3742:I:ANY] 2457( 10) 0 0 0 -106 46 0 0 0 4 41 411 0 0 0 243 100 [ 97.921557] wlan: [3742:I:ANY] 2462( 11) 2 15 54 -108 31 0 0 1 0 100 0 0 1 1 0 100 [ 97.938925] wlan: [3742:I:ANY] 2467( 12) 0 0 0 -108 27 0 0 0 4 57 571 0 0 0 175 100 [ 97.956293] wlan: [3742:I:ANY] 2472( 13) 0 0 0 -108 26 0 0 0 1 84 847 0 0 0 118 100 [ 97.973842] wlan: [3742:I:ANY] vap-0(ath1): ACS result PCH 3, SCH 7, hw_mode 1 chwidth 40, vht_seg0 5, vht_seg1 0 [ 97.991094] wlan: [3742:I:ANY] vap-1(ath11): ACS result PCH 3, SCH 7, hw_mode 1 chwidth 40, vht_seg0 5, vht_seg1 0 [ 98.001498] wlan: [3742:I:ANY] vap-2(ath12): ACS result PCH 3, SCH 7, hw_mode 1 chwidth 40, vht_seg0 5, vht_seg1 0 [ 98.011848] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 98.022293] wlan: [3742:I:ANY] vdev[3]: Mgt Rate:1000(kbps) [ 98.030148] wlan: [3742:I:ANY] ieee80211_acs_scan_evhandler: 4660: lock held duration: 358(ms) [ 98.083565] wlan: [0:I:CMN_MLME] vdev[3] ieee chan:3 [ 98.083699] wlan: [0:E:ANY] Smart Antenna is not supported [ 98.087698] wlan: [0:I:ANY] vdev[3]: Mgt Rate:1000(kbps) [ 98.092992] wlan: [0:I:ANY] vdev[3]: Mgt Rate:1000(kbps) [ 98.109252] wlan: [5103:I:ANY] DES SSID SET=NETGEAR_ORBI_74179507 [ 98.109286] wlan: [5103:I:ANY] wlan_cfg80211_chan_to_phymode: 1235: wlan_cfg80211_chan_to_phymode: band:0 width: 2 channel_cfreq: 2422 center_freq1: 2432 chandef.center_freq2: 0 flags: 0 [ 98.114642] wlan: [5103:I:ANY] ieee80211_ucfg_set_freq_internal: 530: [ 98.114642] Channel is configured already!! [ 98.131246] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 98.143696] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:3 [ 98.149919] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps) [ 98.154641] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps) [ 98.248698] wlan: [5103:I:ANY] DES SSID SET=ORBI18 [ 98.248736] wlan: [5103:I:ANY] wlan_cfg80211_set_phymode: 1211: desired hw mode: 11 [ 98.252617] wlan: [5103:I:ANY] ieee80211_ucfg_set_freq_internal: 530: [ 98.252617] Channel is configured already!! [ 98.260204] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 98.293960] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:3 [ 98.294255] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps) [ 98.298028] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps) [ 98.363860] wlan: [5103:I:ANY] DES SSID SET=NETGEAR-Guest [ 98.363888] wlan: [5103:I:ANY] wlan_cfg80211_set_phymode: 1211: desired hw mode: 11 [ 98.368397] wlan: [5103:I:ANY] ieee80211_ucfg_set_freq_internal: 530: [ 98.368397] Channel is configured already!! [ 98.375906] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 98.414142] wlan: [0:I:CMN_MLME] vdev[2] ieee chan:3 [ 98.414426] wlan: [0:I:ANY] vdev[2]: Mgt Rate:1000(kbps) [ 98.418204] wlan: [0:I:ANY] vdev[2]: Mgt Rate:1000(kbps) [ 98.882097] wlan: [5103:I:ANY] DES SSID SET=NETGEAR_ORBI_74179507 [ 98.882142] wlan: [5103:I:ANY] wlan_cfg80211_chan_to_phymode: 1235: wlan_cfg80211_chan_to_phymode: band:1 width: 3 channel_cfreq: 5540 center_freq1: 5530 chandef.center_freq2: 0 flags: 0 [ 98.887577] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 98.912239] wlan: [0:I:CMN_MLME] vdev[4] ieee chan:108 [ 98.912438] wlan: [0:E:mlme] wlan_mlme_inc_act_cmd_timeout: 1412: DFS timeout:72000 [ 98.916746] wlan: [0:I:ANY] vdev[4]: Mgt Rate:6000(kbps) [ 98.924566] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5500. [ 98.929794] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5520. [ 98.937970] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5540. [ 98.946377] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5560. [ 98.989165] wlan: [13273:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 98.998270] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 98.998776] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_set_current_channel: 822: dfs_curchan already updated [ 99.014729] wlan: [0:I:CMN_MLME] vdev[4] ieee chan:108 [ 99.016695] wlan: [0:E:mlme] wlan_mlme_inc_act_cmd_timeout: 1412: DFS timeout:72000 [ 99.021668] wlan: [0:I:ANY] vdev[4]: Mgt Rate:6000(kbps) [ 99.027586] wlan: [13279:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath01 : clone params: 0x00000001 [ 99.027618] wlan: [13279:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create a2:c9:eb:d8:7b:e6 [ 99.027639] wlan: [13279:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation [ 99.027648] wlan: [13279:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x949a0500, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 99.027648] [ 99.063968] wlan: [13279:I:ANY] ol_ath_vap_set_param: 1111: Setting SGI value: 1 [ 99.076267] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5500. [ 99.076331] wlan: [13279:I:ANY] ol_ath_vap_set_param: 2139: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 99.076336] wlan: [13279:I:ANY] ol_ath_vap_set_param: 2149: he_bf_cap=0x3b [ 99.076352] wlan: [13279:I:ANY] ol_ath_vap_set_param: 2164: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 99.076393] wlan: [13279:I:ANY] MBO Initialized [ 99.076397] wlan: [13279:I:ANY] OCE Initialized [ 99.076416] wlan: [13279:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 45 nss_id -1 [ 99.076422] wlan: [13279:I:ANY] NSS radio_if 28 [ 99.083716] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0 [ 99.083745] wlan: [13279:I:ANY] osif_nss_ol_vap_create: 1376: vap create 976e4500 : if_num 45 [ 99.083772] wlan: [13279:I:ANY] wlan_vap_create: 1636: exit [ 99.083777] wlan: [13279:E:ANY] Smart Antenna is not supported [ 99.084055] dp_peer_add_ast: pdevid: 0 vdev: 5 ast_entry->type: 1 flags: 0x0 peer_mac: 00:00:00:00:00:00 peer: 96180000 mac a2:c9:eb:d8:7b:e6 [ 99.084055] wlan: [13279:E:ANY] Smart Antenna is not supported [ 99.084072] wlan: [13279:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 99.084077] wlan: [13279:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 99.087188] wlan: [13279:I:ANY] VAP device ath01 created osifp: (976e4500) os_if: (97fe0000) [ 99.211414] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5520. [ 99.219971] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5540. [ 99.227988] ieee80211_dfs_deliver_event: dfs CAC_START event delivered on chan freq 5560. [ 99.673653] br-guest: port 6(ath0.4093) entered forwarding state [ 99.683671] br-lan: port 6(ath0.4094) entered forwarding state [ 100.077512] device ath01 entered promiscuous mode [ 100.077633] br-lan: port 7(ath01) entered forwarding state [ 100.081219] br-lan: port 7(ath01) entered forwarding state [ 100.167142] wlan: [5103:I:ANY] DES SSID SET=ORBI18 [ 100.167169] wlan: [5103:I:ANY] wlan_cfg80211_set_phymode: 1211: desired hw mode: 19 [ 100.171069] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 100.178466] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_set_current_channel: 822: dfs_curchan already updated [ 100.209918] wlan: [0:I:CMN_MLME] vdev[5] ieee chan:108 [ 100.210060] wlan: [0:E:mlme] wlan_mlme_inc_act_cmd_timeout: 1412: DFS timeout:72000 [ 100.214026] wlan: [0:I:ANY] vdev[5]: Mgt Rate:6000(kbps) [ 100.383355] wlan: [13460:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 100.383395] wlan: [13460:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 100.404335] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 100.404397] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_set_current_channel: 822: dfs_curchan already updated [ 100.420315] wlan: [0:I:CMN_MLME] vdev[5] ieee chan:108 [ 100.421603] wlan: [0:E:mlme] wlan_mlme_inc_act_cmd_timeout: 1412: DFS timeout:72000 [ 100.426659] wlan: [0:I:ANY] vdev[5]: Mgt Rate:6000(kbps) [ 100.445769] wlan: [13483:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath02 : clone params: 0x00000001 [ 100.445840] wlan: [13483:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create a6:c9:eb:d8:7b:e6 [ 100.457287] wlan: [13483:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation [ 100.465216] wlan: [13483:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x949a0500, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 100.465216] [ 100.474213] wlan: [13483:I:ANY] ol_ath_vap_set_param: 1111: Setting SGI value: 1 [ 100.486475] wlan: [13483:I:ANY] ol_ath_vap_set_param: 2139: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 100.493868] wlan: [13483:I:ANY] ol_ath_vap_set_param: 2149: he_bf_cap=0x3b [ 100.507544] wlan: [13483:I:ANY] ol_ath_vap_set_param: 2164: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 100.514263] wlan: [13483:I:ANY] MBO Initialized [ 100.528335] wlan: [13483:I:ANY] OCE Initialized [ 100.532722] wlan: [13483:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 46 nss_id -1 [ 100.537274] wlan: [13483:I:ANY] NSS radio_if 28 [ 100.547032] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0 [ 100.551379] wlan: [13483:I:ANY] osif_nss_ol_vap_create: 1376: vap create 991cf500 : if_num 46 [ 100.559739] wlan: [13483:I:ANY] wlan_vap_create: 1636: exit [ 100.568413] wlan: [13483:E:ANY] Smart Antenna is not supported [ 100.574036] dp_peer_add_ast: pdevid: 0 vdev: 6 ast_entry->type: 1 flags: 0x0 peer_mac: 00:00:00:00:00:00 peer: 961c0000 mac a6:c9:eb:d8:7b:e6 [ 100.579845] wlan: [13483:E:ANY] Smart Antenna is not supported [ 100.592609] wlan: [13483:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 100.598348] wlan: [13483:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 100.608776] wlan: [13483:I:ANY] VAP device ath02 created osifp: (991cf500) os_if: (97f18000) [ 101.596221] device ath02 entered promiscuous mode [ 101.596340] br-guest: port 7(ath02) entered forwarding state [ 101.599935] br-guest: port 7(ath02) entered forwarding state [ 101.690601] wlan: [5103:I:ANY] DES SSID SET=NETGEAR-Guest [ 101.690631] wlan: [5103:I:ANY] wlan_cfg80211_set_phymode: 1211: desired hw mode: 19 [ 101.695311] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 101.702491] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_set_current_channel: 822: dfs_curchan already updated [ 101.712704] wlan: [0:I:CMN_MLME] vdev[6] ieee chan:108 [ 101.720368] wlan: [0:E:mlme] wlan_mlme_inc_act_cmd_timeout: 1412: DFS timeout:72000 [ 101.725388] wlan: [0:I:ANY] vdev[6]: Mgt Rate:6000(kbps) [ 101.886295] wlan: [13869:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 101.886333] wlan: [13869:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 101.895945] wlan: [13869:I:ANY] wlan_cfg80211_set_wiphy_params: 1966: WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 101.915674] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 101.917433] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_set_current_channel: 822: dfs_curchan already updated [ 101.936997] wlan: [13875:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath03 : clone params: 0x00005001 [ 101.937069] wlan: [13875:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create aa:c9:eb:d8:7b:e6 [ 101.948559] wlan: [13875:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation [ 101.953197] wlan: [0:I:CMN_MLME] vdev[6] ieee chan:108 [ 101.953301] wlan: [0:E:mlme] wlan_mlme_inc_act_cmd_timeout: 1412: DFS timeout:72000 [ 101.953339] wlan: [0:I:ANY] vdev[6]: Mgt Rate:6000(kbps) [ 101.977858] wlan: [13875:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x949a0500, opmode=IEEE80211_M_HOSTAP, flags=0x5001 [ 101.977858] [ 101.983585] wlan: [13875:I:ANY] ol_ath_vap_set_param: 1111: Setting SGI value: 1 [ 101.996198] wlan: [13875:I:ANY] ol_ath_vap_set_param: 2139: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0 [ 102.003364] wlan: [13875:I:ANY] ol_ath_vap_set_param: 2149: he_bf_cap=0x3b [ 102.017137] wlan: [13875:I:ANY] ol_ath_vap_set_param: 2164: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 102.023891] wlan: [13875:I:ANY] MBO Initialized [ 102.037984] wlan: [13875:I:ANY] OCE Initialized [ 102.042253] wlan: [13875:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 47 nss_id -1 [ 102.046773] wlan: [13875:I:ANY] NSS radio_if 28 [ 102.056618] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0 [ 102.060934] wlan: [13875:I:ANY] osif_nss_ol_vap_create: 1376: vap create 9a6e7500 : if_num 47 [ 102.069266] wlan: [13875:I:ANY] wlan_vap_create: 1636: exit [ 102.073622] br-lan: port 7(ath01) entered forwarding state [ 102.083495] wlan: [13875:E:ANY] Smart Antenna is not supported [ 102.089224] dp_peer_add_ast: pdevid: 0 vdev: 7 ast_entry->type: 1 flags: 0x0 peer_mac: 00:00:00:00:00:00 peer: 96280000 mac aa:c9:eb:d8:7b:e6 [ 102.095141] wlan: [13875:E:ANY] Smart Antenna is not supported [ 102.107639] wlan: [13875:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 102.113336] wlan: [13875:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 102.123665] wlan: [13875:I:ANY] VAP device ath03 created osifp: (9a6e7500) os_if: (97d60000) HWMODE: 11ACVHT80 [ 102.296657] wlan: [13907:I:ANY] DES SSID SET=SM_1 [ 102.350924] wlan: [13911:I:ANY] ieee80211_ucfg_set_freq_internal: 530: [ 102.350924] Channel is configured already!! [ 103.195864] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 103.195922] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_set_current_channel: 822: dfs_curchan already updated [ 103.331952] wlan: [0:E:BSSCOLOR] ieee80211_setup_bsscolor failed : not 11AX channel [ 103.332029] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_set_current_channel: 822: dfs_curchan already updated [ 103.366231] wlan: [0:I:CMN_MLME] vdev[7] ieee chan:108 [ 103.366374] wlan: [0:E:mlme] wlan_mlme_inc_act_cmd_timeout: 1412: DFS timeout:72000 [ 103.370319] wlan: [0:I:ANY] vdev[7]: Mgt Rate:6000(kbps) [ 103.593657] br-guest: port 7(ath02) entered forwarding state wsplcd: starting daemon ******FW ini file not found****** ---****SSID is 'NETGEAR_ORBI_74179507' mode *****---- ---****SSID is 'ORBI18' mode *****---- [ 106.879737] br-guest: port 5(ath12) entered disabled state ----****Call ifconfig ath12 1 count=20 ---****SSID is 'SM_0' mode *****---- ---****SSID is 'NETGEAR_ORBI_74179507' mode *****---- ---****SSID is 'ORBI18' mode *****---- [ 107.038060] br-guest: port 7(ath02) entered disabled state ----****Call ifconfig ath02 1 count=20 ---****SSID is 'SM_1' mode *****---- =======guest ifup : hotplug reload dhcp guest server ====== guest udhcp server stop guest vlan udhcp server start whc (repacd): Add VLAN ifaces for ethernet guest network support whc (repacd): For Home network all the traffic is untagged,no vlan hyd: ERROR: Bridge is not attached; start hyfi-bridging first whc (repacd): No changes; not restarting network stack... whc (repacd): Starting wsplcd wsplcd: starting daemon whc (repacd): Starting hyd [ 112.782443] wlan: [16374:I:ANY] osif_nss_vdev_set_cfg: 1999: setting hifi mode 5 target type 0 [ 112.782478] wlan: [16374:I:ANY] osif_nss_vdev_set_cfg: 2003: Mcast command 5 [ 112.851380] wlan: [16377:I:ANY] osif_nss_vdev_set_cfg: 1999: setting hifi mode 5 target type 0 [ 112.851414] wlan: [16377:I:ANY] osif_nss_vdev_set_cfg: 2003: Mcast command 5 [ 112.916259] wlan: [16383:I:ANY] osif_nss_vdev_set_cfg: 1999: setting hifi mode 5 target type 0 [ 112.916293] wlan: [16383:I:ANY] osif_nss_vdev_set_cfg: 2003: Mcast command 5 [ 112.979679] wlan: [16389:I:ANY] osif_nss_vdev_set_cfg: 1999: setting hifi mode 5 target type 0 [ 112.979715] wlan: [16389:I:ANY] osif_nss_vdev_set_cfg: 2003: Mcast command 5 hyd: starting daemon hyd: starting daemon guest No update in BD agent just mount the overlay partition for bitdefender [ntpclient] getRaCloudTime, Query... [ 161.123644] wlan: [0:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_cac_timeout: 123: cac expired, chan 5540 curr time 4294828 [ 161.123995] wlan: [0:I:ANY] vdev[4]: Mgt Rate:6000(kbps) [ 161.133099] wlan: [0:I:ANY] vdev[5]: Mgt Rate:6000(kbps) [ 161.138417] wlan: [0:I:ANY] vdev[7]: Mgt Rate:6000(kbps) [ 161.143741] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5500. [ 161.148946] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5520. [ 161.157382] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5540. [ 161.165884] ieee80211_dfs_deliver_event: dfs CAC_COMPLETED event delivered on chan freq 5560. [ntpclient] getRaCloudTime, Query... [ntpclient] getRaCloudTime, Query... [ntpclient] getRaCloudTime, Query... [ntpclient] getRaCloudTime, Query... [ntpclient] getRaCloudTime, Query... [SOAPClient]{CONSOLE}{2024-11-15 13:04:37}[agent.c:324] soap_agent receive AllConfig SIG BusyBox v1.28.3 () built-in shell (ash) MM NM MMMMMMM M M $MMMMM MMMMM MMMMMMMMMMM MMM MMM MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM' MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM MMMMMM MMMMN M MMMMMMMMM MMMM MMMM MMMM M MMMMMMM M M M --------------------------------------------------------------- For those about to rock... (Chaos Calmer, rtm-4.4.2.1+r49254) --------------------------------------------------------------- root@RBR350:/# cat /proc/mtd dev: size erasesize name mtd0: 00180000 00020000 "0:SBL1" mtd1: 00100000 00020000 "0:MIBIB" mtd2: 00080000 00020000 "0:BOOTCONFIG" mtd3: 00080000 00020000 "0:BOOTCONFIG1" mtd4: 00380000 00020000 "0:QSEE" mtd5: 00380000 00020000 "0:QSEE_1" mtd6: 00080000 00020000 "0:DEVCFG" mtd7: 00080000 00020000 "0:DEVCFG_1" mtd8: 00080000 00020000 "0:RPM" mtd9: 00080000 00020000 "0:RPM_1" mtd10: 00080000 00020000 "0:CDT" mtd11: 00080000 00020000 "0:CDT_1" mtd12: 00080000 00020000 "0:APPSBLENV" mtd13: 00180000 00020000 "0:APPSBL" mtd14: 00180000 00020000 "0:APPSBL_1" mtd15: 00080000 00020000 "0:ART" mtd16: 00140000 00020000 "config" mtd17: 00100000 00020000 "nvram" mtd18: 00100000 00020000 "boarddata" mtd19: 00100000 00020000 "boarddata.bak" mtd20: 00080000 00020000 "pot" mtd21: 00080000 00020000 "pot.bak" mtd22: 00380000 00020000 "traffic_meter" mtd23: 00100000 00020000 "cert" mtd24: 00400000 00020000 "language" mtd25: 00a00000 00020000 "sstorage" mtd26: 00400000 00020000 "Reserved1" mtd27: 00080000 00020000 "oopsdump" mtd28: 00200000 00020000 "rae" mtd29: 02800000 00020000 "ntgrdata" mtd30: 03580000 00020000 "rootfs_1" mtd31: 03580000 00020000 "rootfs" mtd32: 003b2cc8 0001f000 "kernel" mtd33: 001dd800 0001f000 "wifi_fw" mtd34: 02283000 0001f000 "ubi_rootfs" mtd35: 0001f000 0001f000 "rootfs_data" mtd36: 02416000 0001f000 "vol_ntgrdata"

Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00077-IPQ60xxLZB-2 S - IMAGE_VARIANT_STRING=IPQ6018LA S - OEM_IMAGE_VERSION_STRING=crm-ubuntu64 S - Boot Interface: NAND S - Secure Boot: On S - Boot Config @ 0x000a602c = 0x000002e5 S - JTAG ID @ 0x000a607c = 0x001390e1 S - OEM ID @ 0x000a6080 = 0x4e470006 S - Serial Number @ 0x000a4128 = 0x5a687226 S - Feature Config Row 0 @ 0x000a4130 = 0x0000800018200021 S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83783000009 S - PBL Patch Ver: 1 S - I-cache: On S - D-cache: On B - 3413 - PBL, Start B - 592 - bootable_media_detect_entry, Start B - 4339 - bootable_media_detect_success, Start B - 5207 - elf_loader_entry, Start B - 5380 - auth_hash_seg_entry, Start B - 7846 - auth_hash_seg_exit, Start B - 17206 - elf_segs_hash_verify_entry, Start B - 119354 - elf_segs_hash_verify_exit, Start B - 123776 - auth_xbl_sec_hash_seg_entry, Start B - 123919 - auth_xbl_sec_hash_seg_exit, Start B - 130263 - xbl_sec_segs_hash_verify_entry, Start B - 130264 - xbl_sec_segs_hash_verify_exit, Start B - 131193 - PBL, End B - 110074 - SBL1, Start B - 240584 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4 B - 243024 - clock_init, Start D - 2745 - clock_init, Delta B - 251503 - boot_flash_init, Start D - 29493 - boot_flash_init, Delta B - 284290 - sbl1_ddr_set_default_params, Start D - 244 - sbl1_ddr_set_default_params, Delta B - 290909 - boot_config_data_table_init, Start D - 4727 - boot_config_data_table_init, Delta - (575 Bytes) B - 300730 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:2,Subtype:0 B - 305579 - Image Load, Start D - 6588 - OEM_MISC Image Loaded, Delta - (0 Bytes) B - 314912 - Image Load, Start D - 5063 - PMIC Image Loaded, Delta - (0 Bytes) B - 322781 - sbl1_ddr_set_params, Start B - 327753 - CPR configuration: 0x366 B - 330955 - Pre_DDR_clock_init, Start D - 213 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta B - 367616 - Image Load, Start D - 458 - APDP Image Loaded, Delta - (0 Bytes) B - 380731 - Image Load, Start D - 458 - QTI_MISC Image Loaded, Delta - (0 Bytes) B - 383171 - Image Load, Start D - 7808 - Auth Metadata D - 640 - Segments hash check D - 29219 - QSEE Dev Config Image Loaded, Delta - (36354 Bytes) B - 414373 - Image Load, Start D - 13206 - Auth Metadata D - 10675 - Segments hash check D - 336171 - QSEE Image Loaded, Delta - (1470632 Bytes) B - 750971 - Image Load, Start D - 7534 - Auth Metadata D - 976 - Segments hash check D - 41388 - RPM Image Loaded, Delta - (102664 Bytes) B - 794037 - Image Load, Start D - 7503 - Auth Metadata D - 3233 - Segments hash check D - 126453 - APPSBL Image Loaded, Delta - (566148 Bytes) B - 936136 - SBL1, End D - 826367 - SBL1, Delta S - Flash Throughput, 5000 KB/s (2177045 Bytes, 426229 us) S - Core 0 Frequency, 800 MHz S - DDR Frequency, 466 MHz U-Boot 2016.01_rtm-4.3.2.25 (Aug 23 2020 - 09:19:39 -0700), Build: jenkins-Orbi_Firmware_Kale-81 DRAM: smem ram ptable found: ver: 2 len: 4 512 MiB NAND: ONFI device found ID = 1590acef Vendor = ef Device = ac SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000 ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 512 MiB MMC: sdhci: Node Not found, skipping initialization PCI0 is not defined in the device tree In: serial@78B1000 Out: serial@78B1000 Err: serial@78B1000 machid: 8030200 eth0 MAC Address from ART is not valid eth1 MAC Address from ART is not valid eth2 MAC Address from ART is not valid eth3 MAC Address from ART is not valid eth4 MAC Address from ART is not valid eth5 MAC Address from ART is not valid Net: MAC0 addr:9c:c9:eb:d8:7b:e4 PHY ID1: 0x4d PHY ID2: 0xd0b1 EDMA ver 1 hw init Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0) RxDesc:1 (15-15) RxFill:1 (7-7) ipq6018_edma_alloc_rings: successfull ipq6018_edma_setup_ring_resources: successfull ipq6018_edma_configure_rings: successfull ipq6018_edma_hw_init: successfull eth0 ipq6018_eth_halt: done eth0 PHY0 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex eth0 PHY2 Down Speed :10 Half duplex eth0 PHY3 up Speed :1000 Full duplex eth0 PHY4 Down Speed :10 Half duplex ipq6018_eth_init: done net_loop:491 Client starts...[Listening] for ADVERTISE...TTT Retry count exceeded; boot the image as usual ipq6018_eth_halt: done nmrp server is stopped or failed ! Hit any key to stop autoboot: 0 ubi0: attaching mtd1 ubi0: scanning is finished ubi0: attached mtd1 (name "mtd=0", size 53 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 428, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1768919110 ubi0: available PEBs: 0, total reserved PEBs: 428, PEBs reserved for bad PEB handling: 80 Read 0 bytes from volume kernel to 44000000 No size specified -> Using max size (5459968) ## Loading kernel from FIT Image at 44000000 ... Using 'config@1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-6.12.66 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e8 Data Size: 5368595 Bytes = 5.1 MiB Architecture: AArch64 OS: Linux Load Address: 0x41000000 Entry Point: 0x41000000 Hash algo: crc32 Hash value: 0f3ebd23 Hash algo: sha1 Hash value: 809cb13a04623f140504d97fe9db3ffd7170cabb Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000000 ... Using 'config@1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt netgear_rbr350 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x4451ed3c Data Size: 35543 Bytes = 34.7 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 2ffffab3 Hash algo: sha1 Hash value: 683f670f5c7876759d662772915d106e197d6302 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x4451ed3c Uncompressing Kernel Image ... OK Loading Device Tree to 484f4000, end 484ffad6 ... OK Could not find PCI in device tree Using machid 0x8030200 from environment Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 6.12.66 (build@e403190db63e) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.3.0 r32700-30f8ceaa7e) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Tue Jan 20 14:25:10 2026 [ 0.000000] Machine model: Netgear RBR350 [ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable memory@40000000 [ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootloader@4a100000 [ 0.000000] OF: reserved mem: 0x000000004a500000..0x000000004a5fffff (1024 KiB) nomap non-reusable sbl@4a500000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable memory@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable memory@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004fffffff (87040 KiB) nomap non-reusable memory@4ab00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff] [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a0fffff] [ 0.000000] node 0: [mem 0x000000004a100000-0x000000004fffffff] [ 0.000000] node 0: [mem 0x0000000050000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 20 pages/cpu s43224 r8192 d30504 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: ubi.mtd=rootfs root=/dev/ubiblock0_1 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000083] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000096] pid_max: default: 32768 minimum: 301 [ 0.005092] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.005105] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.009911] rcu: Hierarchical SRCU implementation. [ 0.009920] rcu: Max phase no-delay instances is 1000. [ 0.010252] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.010664] smp: Bringing up secondary CPUs ... [ 0.011323] Detected VIPT I-cache on CPU1 [ 0.011429] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.012181] Detected VIPT I-cache on CPU2 [ 0.012258] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.013023] Detected VIPT I-cache on CPU3 [ 0.013096] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.013178] smp: Brought up 1 node, 4 CPUs [ 0.013187] SMP: Total of 4 processors activated. [ 0.013191] CPU: All CPU(s) started at EL1 [ 0.013195] CPU features: detected: 32-bit EL0 Support [ 0.013200] CPU features: detected: CRC32 instructions [ 0.013253] alternatives: applying system-wide alternatives [ 0.013449] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.013720] Memory: 382692K/524288K available (8512K kernel code, 892K rwdata, 2680K rodata, 960K init, 287K bss, 138636K reserved, 0K cma-reserved) [ 0.021064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021091] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.021220] 29376 pages in range for non-PLT usage [ 0.021224] 520896 pages in range for PLT usage [ 0.023326] pinctrl core: initialized pinctrl subsystem [ 0.025441] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.026042] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.026081] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.026116] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.026501] thermal_sys: Registered thermal governor 'step_wise' [ 0.026562] cpuidle: using governor menu [ 0.026750] ASID allocator initialised with 65536 entries [ 0.032462] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000 [ 0.071345] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.094500] SCSI subsystem initialized [ 0.094717] usbcore: registered new interface driver usbfs [ 0.094769] usbcore: registered new interface driver hub [ 0.094806] usbcore: registered new device driver usb [ 0.095108] qcom_scm: convention: smc arm 64 [ 0.096800] s2: Bringing 0uV into 725000-725000uV [ 0.097382] clocksource: Switched to clocksource arch_sys_counter [ 0.097911] l2: Bringing 0uV into 1800000-1800000uV [ 0.098037] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulators: Supply for l2 (l2) resolved to itself [ 0.101106] NET: Registered PF_INET protocol family [ 0.101251] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.103228] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.103247] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.103263] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.103313] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.103456] TCP: Hash tables configured (established 4096 bind 4096) [ 0.103933] MPTCP token hash table entries: 512 (order: 2, 12288 bytes, linear) [ 0.104097] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.104123] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.104548] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.104587] PCI: CLS 0 bytes, default 64 [ 0.106215] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.106734] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.106741] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.120489] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.121423] msm_serial 78b1000.serial: msm_serial: detected port #0 [ 0.121503] msm_serial 78b1000.serial: uartclk = 1843200 [ 0.121876] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 22, base_baud = 115200) is a MSM [ 0.121953] msm_serial: console setup on port #0 [ 0.121996] printk: legacy console [ttyMSM0] enabled [ 0.869747] msm_serial: driver initialized [ 0.879529] loop: module loaded [ 0.880861] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac [ 0.881491] nand: Winbond W29N04GZ [ 0.888277] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.991339] i2c_dev: i2c /dev entries driver [ 0.996760] sdhci: Secure Digital Host Controller Interface driver [ 0.996802] sdhci: Copyright(c) Pierre Ossman [ 1.001869] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.010277] remoteproc remoteproc0: releasing cd00000.remoteproc [ 1.014474] NET: Registered PF_INET6 protocol family [ 1.019177] Segment Routing with IPv6 [ 1.022979] In-situ OAM (IOAM) with IPv6 [ 1.026556] NET: Registered PF_PACKET protocol family [ 1.030527] 8021q: 802.1Q VLAN Support v1.8 [ 1.067913] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.068192] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.074044] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2 [ 1.080660] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.088309] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.095805] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 1.104955] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV [ 1.111904] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV [ 1.121888] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV [ 1.131694] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 912500 uV [ 1.141527] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 587, quot_offset[ 7]= 0 [ 1.151315] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 781, quot_offset[ 7]= 190 [ 1.162165] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 881, quot_offset[ 7]= 100 [ 1.173104] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 969, quot_offset[ 7]= 85 [ 1.184344] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.188167] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac [ 1.201791] nand: Winbond W29N04GZ [ 1.208173] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.211668] 32 qcomsmem partitions found on MTD device qcom_nand.0 [ 1.219076] Creating 32 MTD partitions on "qcom_nand.0": [ 1.225084] 0x000000000000-0x000000180000 : "0:sbl1" [ 1.232834] 0x000000180000-0x000000280000 : "0:mibib" [ 1.236700] 0x000000280000-0x000000300000 : "0:bootconfig" [ 1.241505] 0x000000300000-0x000000380000 : "0:bootconfig1" [ 1.246625] 0x000000380000-0x000000700000 : "0:qsee" [ 1.254482] 0x000000700000-0x000000a80000 : "0:qsee_1" [ 1.259675] 0x000000a80000-0x000000b00000 : "0:devcfg" [ 1.262268] 0x000000b00000-0x000000b80000 : "0:devcfg_1" [ 1.267429] 0x000000b80000-0x000000c00000 : "0:rpm" [ 1.272882] 0x000000c00000-0x000000c80000 : "0:rpm_1" [ 1.277465] 0x000000c80000-0x000000d00000 : "0:cdt" [ 1.282712] 0x000000d00000-0x000000d80000 : "0:cdt_1" [ 1.287372] 0x000000d80000-0x000000e00000 : "0:appsblenv" [ 1.292556] 0x000000e00000-0x000000f80000 : "0:appsbl" [ 1.298768] 0x000000f80000-0x000001100000 : "0:appsbl_1" [ 1.303778] 0x000001100000-0x000001180000 : "0:art" [ 1.308485] 0x000001180000-0x0000012c0000 : "config" [ 1.313648] 0x0000012c0000-0x0000013c0000 : "nvram" [ 1.318780] 0x0000013c0000-0x0000014c0000 : "boarddata" [ 1.323647] 0x0000014c0000-0x0000015c0000 : "boarddata.bak" [ 1.328548] 0x0000015c0000-0x000001640000 : "pot" [ 1.333663] 0x000001640000-0x0000016c0000 : "pot.bak" [ 1.338581] 0x0000016c0000-0x000001a40000 : "traffic_meter" [ 1.345971] 0x000001a40000-0x000001b40000 : "cert" [ 1.349360] 0x000001b40000-0x000001f40000 : "language" [ 1.356612] 0x000001f40000-0x000002940000 : "sstorage" [ 1.366549] 0x000002940000-0x000002d40000 : "reserved1" [ 1.370303] 0x000002d40000-0x000002dc0000 : "oopsdump" [ 1.371406] 0x000002dc0000-0x000002fc0000 : "rae" [ 1.377835] 0x000002fc0000-0x0000057c0000 : "ntgrdata" [ 1.413290] 0x0000057c0000-0x000008d40000 : "rootfs" [ 1.456411] mtd: setting mtd30 (rootfs) as root device [ 1.456699] mtdsplit: no squashfs found in "rootfs" [ 1.460506] 0x000008d40000-0x00000c2c0000 : "rootfs_1" [ 1.521772] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 864000 KHz [ 1.524696] remoteproc remoteproc0: cd00000.remoteproc is available [ 1.531823] ubi0: attaching mtd30 [ 1.779130] ubi0: scanning is finished [ 1.837955] ubi0: attached mtd30 (name "rootfs", size 53 MiB) [ 1.838000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.842693] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.849483] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.856322] ubi0: good PEBs: 428, bad PEBs: 0, corrupted PEBs: 0 [ 1.863101] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 1.869353] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1768919110 [ 1.876380] ubi0: available PEBs: 0, total reserved PEBs: 428, PEBs reserved for bad PEB handling: 80 [ 1.885693] ubi0: background thread "ubi_bgt0d" started, PID 635 [ 1.895510] block ubiblock0_1: created from ubi0:1(rootf[ 1.909695] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 1.910153] Freeing unused kernel memory: 960K [ 1.915897] Run /sbin/init as init process [ 2.090603] init: Console is alive [ 2.090756] init: - watchdog - [ 2.515089] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 2.578243] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 2.671534] ssdk_dt_parse_interrupt[942]:INFO:intr-gpio does not exist [ 3.037772] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii channel selection [ 3.152505] regi_init[2525]:INFO:Initializing CPPE Done!! [ 3.152615] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 3.159655] EDMA ver 1 hw init [ 3.163176] EDMA HW Reset completed succesfully [ 3.165846] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23) [ 3.170268] RxDesc:1 (15-15) RxFill:1 (7-7) [ 3.348266] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) [ 3.407758] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) [ 3.477758] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) [ 3.547757] Qualcomm QCA8075 90000.mdio-1:04: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:04, irq=POLL) [ 3.548738] ********************************************************** [ 3.556660] * NSS Data Plane driver [ 3.563188] ********************************************************** [ 3.578370] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.584653] init: - preinit - [ 4.937346] random: crng init done Cannot parse config file '/etc/fw_env.config': No such file or directory Failed to find NVMEM device Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 9.420863] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 9.421047] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 828 [ 9.451477] UBIFS (ubi0:2): recovery needed [ 9.587474] UBIFS (ubi0:2): recovery completed [ 9.587623] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 9.590844] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 9.598769] UBIFS (ubi0:2): FS size: 29966336 bytes (28 MiB, 236 LEBs), max 246 LEBs, journal size 1523712 bytes (1 MiB, 12 LEBs) [ 9.608657] UBIFS (ubi0:2): reserved for root: 1415383 bytes (1382 KiB) [ 9.620284] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 6D1305D8-19BC-4715-B2C4-D12B35A4FE53, small LPT model [ 9.630347] mount_root: overlay filesystem has not been fully initialized yet [ 9.638537] mount_root: switching to ubifs overlay [ 9.655881] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 9.660943] urandom-seed: Seed file not found (/etc/urandom.seed) [ 9.708411] procd: - early - [ 9.708531] procd: - watchdog - [ 10.274171] procd: - watchdog - [ 10.274800] procd: - ubus - [ 10.428305] procd: - init - Please press Enter to activate this console. [ 10.727949] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.855313] Loading modules backported from Linux version v6.18-0-g7d0a66e4b [ 10.855353] Backport generated by backports.git 4d44cef [ 10.868075] NET: Registered PF_QIPCRTR protocol family [ 10.913180] urngd: v1.0.2 started. [ 10.990441] PPP generic driver version 2.4.2 [ 10.991579] NET: Registered PF_PPPOX protocol family [ 11.028725] ath11k c000000.wifi: ipq6018 hw1.0 [ 11.028761] ath11k c000000.wifi: FW memory mode: 0 [ 11.063670] remoteproc remoteproc0: powering up cd00000.remoteproc [ 11.064052] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 11.959864] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 11.961403] ath11k c000000.wifi: qmi fail to get qcom,m3-dump-addr, ignore m3 dump mem req [ 11.966898] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff [ 11.974528] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 2024-03-01 03:54 fw_build_id WLAN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3 [ 11.984684] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.069005] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Netgear-RBK350 from ath11k/IPQ6018/hw1.0/board-2.bin [ 12.069074] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ6018/hw1.0/board-2.bin [ 12.082513] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ6018/hw1.0/board-2.bin [ 12.095319] ath11k c000000.wifi: failed to fetch board.bin from IPQ6018/hw1.0 [ 12.107892] ath11k c000000.wifi: qmi failed to fetch board file: -12 [ 12.114895] ath11k c000000.wifi: failed to load board data file: -12 [ 17.613770] br-lan: port 1(lan1) entered blocking state [ 17.613827] br-lan: port 1(lan1) entered disabled state [ 17.617981] nss-dp 3a001400.dp3 lan1: entered allmulticast mode [ 17.623338] nss-dp 3a001400.dp3 lan1: entered promiscuous mode [ 17.637969] br-lan: port 2(lan2) entered blocking state [ 17.638017] br-lan: port 2(lan2) entered disabled state [ 17.642086] nss-dp 3a001600.dp4 lan2: entered allmulticast mode [ 17.647491] nss-dp 3a001600.dp4 lan2: entered promiscuous mode [ 17.657103] br-lan: port 3(lan3) entered blocking state [ 17.659071] br-lan: port 3(lan3) entered disabled state [ 17.664186] nss-dp 3a001800.dp5 lan3: entered allmulticast mode [ 17.669688] nss-dp 3a001800.dp5 lan3: entered promiscuous mode [ 20.727870] nss-dp 3a001600.dp4 lan2: PHY Link up speed: 1000 [ 20.727937] br-lan: port 2(lan2) entered blocking state [ 20.732613] br-lan: port 2(lan2) entered forwarding state [ 21.847893] nss-dp 3a001200.dp2 wan: PHY Link up speed: 1000 BusyBox v1.37.0 (2026-01-20 14:25:10 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt SNAPSHOT, r32700-30f8ceaa7e ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- OpenWrt recently switched to the "apk" package manager! OPKG Command APK Equivalent Description ------------------------------------------------------------------ opkg install <pkg> apk add <pkg> Install a package opkg remove <pkg> apk del <pkg> Remove a package opkg upgrade apk upgrade Upgrade all packages opkg files <pkg> apk info -L <pkg> List package contents opkg list-installed apk info List installed packages opkg update apk update Update package lists opkg search <pkg> apk search <pkg> Search for packages ------------------------------------------------------------------ For more information visit: https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet root@OpenWrt:~#

How to add tags

Unsupported devices, qualcommax, ipq6018, 512flash, 512ram, 4port, gigabitethernet, switch, qca8075, u-boot, cortexa53, 4core, qcn5022, qcn5052, 802.11ax, wlan, internalantenna, serial

Unsupported devices qualcommax ipq6018 512flash 512ram 4port gigabitethernet switch qca8075 u-boot cortexa53 4core qcn5022 qcn5052 802.11ax wlan internalantenna serial

Netgear Orbi RBR350/RBS350

OpenWrt support

Hardware highlights

Installing OpenWrt

Notes

Install

Revert to Stock

Specific configuration

Network interfaces

Buttons

Hardware

Info

Photos

Opening the case

Serial

Bootlogs

OEM bootlog

OpenWrt bootlog

Notes

Tags