This translation is older than the original page and might be outdated. See what has changed.

Netgear R8000 Nighthawk

Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details.

  • Stable sur la 18.06.1 release
  • Pour une bonne performance :
    • radio2 5 GHz band (channel 48,country US)

Pour utiliser votre clé usb formaté en ext4

opkg install kmod-phy-bcm-ns-usb3 (pour usb3 connection)

opkg install kmod-usb-storage kmod-usb3

opkg install block-mount (to mount usbdrive ext4 for example)

Pour le WIFI

Pour que le 5ghz fonctionne bien

  1. opkg install kmod-brcmfmac kmod-brcmutil
  2. regler le country code à: US
  3. regler le canal 48 pour le radio2 wlan2 → SAVE → Reboot

Eviter que votre R8000 ne finisse à la poubelle acheter un petit adaptateur série RS232 Lire https://www.ianthurston.com/tech/bricked-netgear-r8000-recovery/ pour debrick avec un adaptateur serie TTL pour lancer le CFE au boot et lancer le tftpd server pour flasher le firmware officiel netgear.

Et ça remarche..

Lire aussi https://forum.lede-project.org/t/is-there-a-way-to-unbrick-an-r8000/4173/3

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/02/11 21:58
  • by 127.0.0.1