Spectrum SAX1V1K (Askey RT5010W)

[Askey] do_bootaskey() check temperature of soc 34 ,and threshold 80 [Askey] thermal_check_temp pass mmc:mmcargs=mmc_mid=15 [Askey] do_boot_signedimg_askey() debug cert - not found verify init: active_part [0], bak_part [1] verify FW [0] start do verify start verify kernel start MMC read: dev # 0, block # 35362, count 16384 ... 16384 blocks read: OK qca_verify.c [29] load_addr:0x44000000 size:0x800000 Kernel image authentication success verify rootfs start MMC read: dev # 0, block # 68130, count 66745 ... 66745 blocks read: OK qca_verify.c [57] load_addr:0x41000000 size:0x2098928 Rootfs image authentication success do verify success verify FW [0] success backup start ... MMC read: dev # 0, block # 51746, count 16384 ... 16384 blocks read: OK no need backup, FW & FW_1 is same. secure boot fuse is enabled ## Loading kernel from FIT Image at 44000028 ... Using 'config@rt5010w-d187-rev6' configuration Trying 'kernel@1' kernel subimage Description: ARM64 OpenWrt Linux-4.4.60 Type: Kernel Image Compression: gzip compressed Data Start: 0x44000110 Data Size: 4014957 Bytes = 3.8 MiB Architecture: AArch64 OS: Linux Load Address: 0x41080000 Entry Point: 0x41080000 Hash algo: crc32 Hash value: 6e678eca Hash algo: sha1 Hash value: af29cb601958b6769ec5668ecaf20caf2d9eb4f1 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000028 ... Using 'config@rt5010w-d187-rev6' configuration Trying 'fdt@rt5010w-d187-rev6' fdt subimage Description: ARM64 OpenWrt rt5010w-d187 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x44462820 Data Size: 82631 Bytes = 80.7 KiB Architecture: AArch64 Hash algo: crc32 Hash value: facc177b Hash algo: sha1 Hash value: 72db93a818eed8a017c9aaa351b6fd240fb9f36d Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x44462820 Uncompressing Kernel Image ... OK Loading Device Tree to 4a1e8000, end 4a1ff2c6 ... OK Using machid 0x8750106 from environment Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.60 (root@runner-xhukirtg-project-558-concurrent-0) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 ec2aa6c+r49254) ) #1 SMP PREEMPT Fri Sep 9 02:08:18 UTC 2022 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Ignoring memory range 0x40000000 - 0x41000000 [ 0.000000] Machine: Askey RT5010W-D187/REV6 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: OVERLAP DETECTED! [ 0.000000] wifi_dump@51100000 (0x0000000051100000--0x0000000051700000) overlaps with wigig_dump@51300000 (0x0000000051300000--0x0000000051700000) [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc07ef4a000 s20864 r8192 d32384 u61440 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 482112 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 mmc_mid=0x15 boot_signedimg root=PARTUUID=a95f4a29-ff7f-b75f-aa8e-5663115196f7 gpt uboot-version=1.3.3 rea=ffffffff time=ffffffff rootwait secboot=1 swiotlb=1 coherent_pool=2M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] software IO TLB [mem 0xbfe02000-0xbfe42000] (0MB) mapped at [ffffffc07ee02000-ffffffc07ee41fff] [ 0.000000] Memory: 1914728K/1960960K available (5508K kernel code, 627K rwdata, 2356K rodata, 228K init, 431K bss, 46232K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc2000000 ( 31 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc07f000000 ( 2032 MB) [ 0.000000] .init : 0xffffffc000830000 - 0xffffffc000869000 ( 228 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000830000 ( 7872 KB) [ 0.000000] .data : 0xffffffc000878000 - 0xffffffc000914e00 ( 628 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000423] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000435] pid_max: default: 32768 minimum: 301 [ 0.000531] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000542] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.001121] Initializing cgroup subsys io [ 0.001139] Initializing cgroup subsys memory [ 0.001166] Initializing cgroup subsys devices [ 0.001179] Initializing cgroup subsys freezer [ 0.001191] Initializing cgroup subsys net_cls [ 0.001202] Initializing cgroup subsys pids [ 0.001449] EFI services will not be available. [ 0.001475] ASID allocator initialised with 65536 entries [ 0.051953] MSM Memory Dump base table set up [ 0.051975] MSM Memory Dump apps data table set up [ 0.090094] Detected VIPT I-cache on CPU1 [ 0.090140] CPU1: Booted secondary processor [410fd034] [ 0.120095] Detected VIPT I-cache on CPU2 [ 0.120126] CPU2: Booted secondary processor [410fd034] [ 0.150131] Detected VIPT I-cache on CPU3 [ 0.150161] CPU3: Booted secondary processor [410fd034] [ 0.150226] Brought up 4 CPUs [ 0.150253] SMP: Total of 4 processors activated. [ 0.150264] CPU: All CPU(s) started at EL1 [ 0.150293] alternatives: patching kernel code [ 0.168155] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.168182] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.168570] pinctrl core: initialized pinctrl subsystem [ 0.169507] NET: Registered protocol family 16 [ 0.200088] cpuidle: using governor ladder [ 0.230112] cpuidle: using governor menu [ 0.230325] NET: Registered protocol family 42 [ 0.230484] vdso: 2 pages (1 code @ ffffffc00087d000, 1 data @ ffffffc00087c000) [ 0.230513] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.231171] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.231299] Read of property:soc_version_minor from node failed [ 0.231309] CPU: IPQ8072A, SoC Version: 2.0 [ 0.231758] IPC logging disabled [ 0.231765] IPC logging disabled [ 0.231771] IPC logging disabled [ 0.231777] IPC logging disabled [ 0.231782] IPC logging disabled [ 0.234479] Soc version is not 1, changing clock offsets [ 0.243314] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.245919] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.249435] sps:sps is ready. [ 0.254475] spmi spmi-0: PMIC Arb Version-2 (0x20010000) [ 0.261204] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.261502] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 [ 0.302227] pps_core: LinuxPPS API ver. 1 registered [ 0.302236] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.302259] PTP clock support registered [ 0.303730] Advanced Linux Sound Architecture Driver Initialized. [ 0.304465] clocksource: Switched to clocksource arch_sys_counter [ 0.307770] NET: Registered protocol family 2 [ 0.308404] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.308609] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.308971] TCP: Hash tables configured (established 16384 bind 16384) [ 0.309031] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.309096] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.309308] NET: Registered protocol family 1 [ 0.309861] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.318147] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.318164] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.321875] Key type asymmetric registered [ 0.321890] Asymmetric key parser 'x509' registered [ 0.321920] io scheduler noop registered [ 0.321933] io scheduler deadline registered (default) [ 0.328728] msm_rpm_log_probe: OK [ 0.329072] msm-dcc b3000.dcc: DCC XPU is not specified [ 0.329317] msm-dcc b3000.dcc: jiffies_64: 0xffff8af0, cntvct_64: 0x9748eab [ 0.329331] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff800027e004) [ 0.329343] msm-dcc b3000.dcc: gcnt_lo: 0x097490a9(0xffffff800027e000) [ 0.329944] TZ SMMU State: SMMU Stage2 Enabled [ 0.329999] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set [ 0.331614] msm_serial 78b3000.serial: msm_serial: detected port #0 [ 0.331656] msm_serial 78b3000.serial: uartclk = 3686400 [ 0.331692] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 78, base_baud = 230400) is a MSM [ 0.331714] msm_serial: console setup on port #0 [ 1.054356] console [ttyMSM0] enabled [ 1.059372] msm_serial: driver initialized [ 1.062886] msm_serial_hsl_init: driver initialized [ 1.075840] brd: module loaded [ 1.080313] loop: module loaded [ 1.081052] spi_qup 78b8000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 1.084405] libphy: Fixed MDIO Bus: probed [ 1.530267] qca-mdio 90000.mdio: Could not find phy-reset-gpio [ 1.530383] libphy: qca_mdio: probed [ 1.536533] qca-mdio 90000.mdio: qca-mdio driver was registered [ 1.538913] cnss: INFO: IPC Logging is disabled! [ 1.544704] Skip QCA8074V1 in V2 platform [ 1.549494] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc07b968018 tgt 0xfffe [ 1.553372] i2c /dev entries driver [ 1.594971] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.595428] sdhci: Secure Digital Host Controller Interface driver [ 1.602469] sdhci: Copyright(c) Pierre Ossman [ 1.608487] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.613309] mmc:emmc actual mid 0x15 and syscon select node DsLow,syscon [ 1.618676] mmc:syscon reg base 0xa000 regval 0x9e5b [ 1.625333] qcom_ice_get_pdevice: invalid device list [ 1.630251] sdhci_msm 7824900.sdhci: sdhci_msm_ice_get_dev: ICE device not probed yet [ 1.635220] sdhci_msm 7824900.sdhci: sdhci_msm_probe: required ICE device not probed yet err = -517 [ 1.643708] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 1.651970] ICE IRQ = 81 [ 1.660757] [ 1.660757] Version Rollback Feature Disabled [ 1.665582] remoteproc remoteproc0: releasing cd00000.qcom_q6v5_wcss [ 1.669831] SPMI VADC - Min ch: 0 Max ch: 15 [ 1.676998] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 [ 1.679468] coresight-csr 6001000.csr: CSR initialized [ 1.686960] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 [ 1.691881] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 [ 1.699453] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 [ 1.706809] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 [ 1.714161] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 [ 1.721568] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 [ 1.728945] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 [ 1.736326] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 [ 1.743681] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 [ 1.751082] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 [ 1.758459] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 [ 1.765842] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 [ 1.773195] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 [ 1.780594] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 [ 1.787971] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 [ 1.795348] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 [ 1.802717] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 [ 1.810119] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 [ 1.817497] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 [ 1.824873] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 [ 1.832243] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 [ 1.839792] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 [ 1.846856] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 [ 1.863932] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 [ 1.879833] sps:BAM 0x0000000006044000 is registered.[ 1.887587] coresight-tmc 6028000.tmc: TMC initialized [ 1.892271] coresight-tmc 6027000.tmc: TMC initialized [ 1.897445] coresight-funnel 6021000.funnel: FUNNEL initialized [ 1.902450] coresight-funnel 6100000.funnel: FUNNEL initialized [ 1.908281] coresight-funnel 6120000.funnel: FUNNEL initialized [ 1.914169] coresight-funnel 6130000.funnel: FUNNEL initialized [ 1.920101] coresight-funnel 61a1000.funnel: FUNNEL initialized [ 1.926492] coresight-etm4x 619c000.etm: ETM 4.0 initialized [ 1.932127] coresight-etm4x 619d000.etm: ETM 4.0 initialized [ 1.938058] coresight-etm4x 619e000.etm: ETM 4.0 initialized [ 1.943680] coresight-etm4x 619f000.etm: ETM 4.0 initialized [ 1.949129] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized [ 1.954714] ------------[ cut here ]------------ [ 1.962190] WARNING: at drivers/clk/clk.c:689 [ 1.966788] Modules linked in: [ 1.973984] [ 1.974081] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.60 #1 [ 1.975646] Hardware name: Askey RT5010W-D187/REV6 (DT) [ 1.981290] task: ffffffc010778000 ti: ffffffc010778000 task.ti: ffffffc010778000 [ 1.986507] PC is at clk_core_disable+0x98/0xa0 [ 1.994135] LR is at clk_disable+0x2c/0x44 [ 1.998473] pc : [<ffffffc000460184>] lr : [<ffffffc000461608>] pstate: 60000085 [ 2.002646] sp : ffffffc010783bd0 [ 2.010190] x29: ffffffc010783bd0 x28: 0000000000000000 [ 2.018515] x27: ffffffc000862678 x26: ffffffc00085c100 [ 2.023811] x25: 0000000000000000 x24: ffffffc000950000 [ 2.029106] x23: ffffffc0008e8300 x22: ffffffc0008e8258 [ 2.034401] x21: ffffffc07bc7ad70 x20: 0000000000000000 [ 2.039697] x19: ffffffc07ba82980 x18: 0000000000000008 [ 2.044991] x17: 0000000000000000 x16: 0000000000000000 [ 2.050286] x15: 0000000000000000 x14: ffffffffffffffff [ 2.055581] x13: 0000000000000010 x12: 0101010101010101 [ 2.060876] x11: 0000000000000020 x10: 0000000000000720 [ 2.066171] x9 : ffffffc010783ab0 x8 : ffffffc010778780 [ 2.071467] x7 : 0000000000000000 x6 : ffffffc07ef4dde8 [ 2.076762] x5 : 0000000000000001 x4 : 0000000000000000 [ 2.082057] x3 : 00000000ffff8b93 x2 : 0000000000000804 [ 2.087352] x1 : 0000000000000001 x0 : ffffffc07bc26a00 [ 2.092646] [ 2.092837] ---[ end trace 31429dbd9b41e472 ]--- [ 2.094393] Call trace: [ 2.098992] [<ffffffc000460184>] clk_core_disable+0x98/0xa0 [ 2.101171] [<ffffffc000308c3c>] amba_put_disable_pclk.isra.4+0x1c/0x38 [ 2.106727] [<ffffffc000308e10>] amba_probe+0xc0/0x124 [ 2.113324] [<ffffffc000359530>] driver_probe_device+0x19c/0x3dc [ 2.118533] [<ffffffc0003597d4>] __driver_attach+0x64/0x90 [ 2.124695] [<ffffffc000357890>] bus_for_each_dev+0x68/0x98 [ 2.129989] [<ffffffc000358f58>] driver_attach+0x20/0x28 [ 2.135459] [<ffffffc000358a98>] bus_add_driver+0x130/0x248 [ 2.141012] [<ffffffc00035a078>] driver_register+0x90/0xdc [ 2.146309] [<ffffffc0003087ec>] amba_driver_register+0x54/0x5c [ 2.151865] [<ffffffc00085383c>] stm_init+0x14/0x1c [ 2.157680] [<ffffffc000082a18>] do_one_initcall+0x19c/0x1b8 [ 2.162545] [<ffffffc000830b20>] kernel_init_freeable+0x18c/0x22c [ 2.168447] [<ffffffc0005d3f1c>] kernel_init+0x10/0xec [ 2.174433] [<ffffffc000085d50>] ret_from_fork+0x10/0x40 [ 2.179566] ------------[ cut here ]------------ [ 2.184932] WARNING: at drivers/clk/clk.c:581 [ 2.189530] Modules linked in: [ 2.196727] [ 2.196822] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.4.60 #1 [ 2.198392] Hardware name: Askey RT5010W-D187/REV6 (DT) [ 2.205420] task: ffffffc010778000 ti: ffffffc010778000 task.ti: ffffffc010778000 [ 2.210462] PC is at clk_core_unprepare+0x78/0x80 [ 2.218094] LR is at clk_unprepare+0x28/0x3c [ 2.222779] pc : [<ffffffc00045fd84>] lr : [<ffffffc000460e28>] pstate: 60000005 [ 2.227124] sp : ffffffc010783bd0 [ 2.234496] x29: ffffffc010783bd0 x28: 0000000000000000 [ 2.242821] x27: ffffffc000862678 x26: ffffffc00085c100 [ 2.248117] x25: 0000000000000000 x24: ffffffc000950000 [ 2.253412] x23: ffffffc0008e8300 x22: ffffffc0008e8258 [ 2.258707] x21: ffffffc07bc7ad70 x20: ffffffc07ba82980 [ 2.264001] x19: ffffffc07ba82980 x18: 0000000000000008 [ 2.269296] x17: 0000000000000000 x16: 0000000000000000 [ 2.274591] x15: 0000000000000000 x14: ffffffffffffffff [ 2.279887] x13: 0000000000000010 x12: 0101010101010101 [ 2.285182] x11: 0000000000000020 x10: 0000000000000720 [ 2.290477] x9 : ffffffc010783b00 x8 : ffffffc010778780 [ 2.295772] x7 : 0000000000000000 x6 : ffffffc07ef4cb80 [ 2.301068] x5 : 0000000000000001 x4 : 0000000000000000 [ 2.306363] x3 : 0000000000000000 x2 : 0000000000000804 [ 2.311658] x1 : 0000000000000001 x0 : ffffffc07bc26a00 [ 2.316952] [ 2.317130] ---[ end trace 31429dbd9b41e473 ]--- [ 2.318698] Call trace: [ 2.323299] [<ffffffc00045fd84>] clk_core_unprepare+0x78/0x80 [ 2.325477] [<ffffffc000308c44>] amba_put_disable_pclk.isra.4+0x24/0x38 [ 2.331379] [<ffffffc000308e10>] amba_probe+0xc0/0x124 [ 2.337801] [<ffffffc000359530>] driver_probe_device+0x19c/0x3dc [ 2.343013] [<ffffffc0003597d4>] __driver_attach+0x64/0x90 [ 2.349173] [<ffffffc000357890>] bus_for_each_dev+0x68/0x98 [ 2.354469] [<ffffffc000358f58>] driver_attach+0x20/0x28 [ 2.359938] [<ffffffc000358a98>] bus_add_driver+0x130/0x248 [ 2.365491] [<ffffffc00035a078>] driver_register+0x90/0xdc [ 2.370787] [<ffffffc0003087ec>] amba_driver_register+0x54/0x5c [ 2.376343] [<ffffffc00085383c>] stm_init+0x14/0x1c [ 2.382158] [<ffffffc000082a18>] do_one_initcall+0x19c/0x1b8 [ 2.387023] [<ffffffc000830b20>] kernel_init_freeable+0x18c/0x22c [ 2.392924] [<ffffffc0005d3f1c>] kernel_init+0x10/0xec [ 2.398912] [<ffffffc000085d50>] ret_from_fork+0x10/0x40 [ 2.403985] coresight-stm: probe of 6002000.stm failed with error -1 [ 2.410744] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 [ 2.415880] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized [ 2.427063] NET: Registered protocol family 10 [ 2.431534] MAP-T DMR module registered. enter [ 2.435137] Registering family. [ 2.439558] NET: Registered protocol family 17 [ 2.442696] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.447232] Bridge firewalling registered [ 2.459953] 8021q: 802.1Q VLAN Support v1.8 [ 2.465292] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 2.468020] pmd9655_s3: supplied by e-smps1-reg [ 2.475328] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 2.479643] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 [ 2.486283] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 2.493905] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 2.501449] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 2.510565] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 712000 uV [ 2.517513] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 848000 uV [ 2.527494] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 928000 uV [ 2.537303] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop=1032000 uV [ 2.547169] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 702, quot_offset[ 7]= 0 [ 2.556925] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 936, quot_offset[ 7]= 230 [ 2.567775] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1057, quot_offset[ 7]= 120 [ 2.578713] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1218, quot_offset[ 7]= 160 [ 2.589775] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 2.601119] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 [ 2.607427] pmd9655_s4: supplied by e-smps1-reg [ 2.614612] cpr3_mem_acc_init: npu: not using memory accelerator regulator [ 2.618881] npu_corner: fused NOM: open-loop= 808000 uV [ 2.625839] npu_corner: fused TURBO: open-loop= 880000 uV [ 2.631682] npu_corner: fused NOM: open-loop= 808000 uV [ 2.637297] npu_corner: fused TURBO: open-loop= 880000 uV [ 2.642944] npu_corner: Normal and Cold condition init done. Default to normal. [ 2.649516] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz [ 2.655799] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz [ 2.663408] mmc:emmc actual mid 0x15 and syscon select node DsLow,syscon [ 2.671615] mmc:syscon reg base 0xa000 regval 0x9e5b [ 2.678369] qcom_ice_get_pdevice: found ice device ffffffc07b863200 [ 2.683291] qcom_ice_get_pdevice: matching platform device ffffffc07bc3d000 [ 2.689334] sdhci_msm 7824900.sdhci: No vreg data found for vdd [ 2.696240] sdhci_msm 7824900.sdhci: No vreg data found for vdd-io [ 2.702285] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8000f3c000 [ 2.709444] sdhci_msm 7824900.sdhci: No vmmc regulator found [ 2.716280] sdhci_msm 7824900.sdhci: No vqmmc regulator found [ 2.764472] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit [ 2.770438] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss [ 2.771315] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available [ 2.782045] hctosys: unable to open rtc device (rtc0) [ 2.791059] pmd9655_ldo11: disabling [ 2.792001] ALSA device list: [ 2.795260] No soundcards found. [ 2.798348] Waiting for root device PARTUUID=a95f4a29-ff7f-b75f-aa8e-5663115196f7... [ 2.837184] mmc0: MAN_BKOPS_EN bit is not set [ 2.879200] mmc0: new HS200 MMC card at address 0001 [ 2.879539] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB [ 2.883313] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB [ 2.888465] Alternate GPT is invalid, using primary GPT. [ 2.893396] GPT: device [179:20] (rootfs) set to be root filesystem [ 2.898789] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 [ 3.015993] VFS: Mounted root (squashfs filesystem) readonly on device 179:20. [ 3.016092] Freeing unused kernel memory: 228K (ffffffc000830000 - ffffffc000869000) [ 3.022112] Freeing alternatives memory: 44K (ffffffc000869000 - ffffffc000874000) failed to open /proc/modules [ 3.164051] init: Console is alive [ 3.164147] init: - watchdog - [ 3.746932] Button Hotplug driver version 0.4.1 [ 3.747964] device-mapper: req-crypt: dm-req-crypt successfully initalized. [ 3.747964] [ 3.752727] SCSI subsystem initialized [ 4.166688] init: - preinit - [ 4.169957] led_smooth init [ 4.170063] Before mount_root [ 4.508521] /dev/mmcblk0p24: recovering journal /dev/mmcblk0p24: clean, 209/32768 files, 10626/131072 blocks /dev/mmcblk0p24: clean, 209/32768 files, 10626/131072 blocks /dev/mmcblk0p25: clean, 323/32768 files, 7046/131072 blocks /dev/mmcblk0p25: clean, 323/32768 files, 7046/131072 blocks [ 4.763677] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: (null) [ 4.764344] mount_root: switching to jffs2 overlay [ 4.764697] random: procd: uninitialized urandom read (4 bytes read, 11 bits of entropy available) [ 4.808546] [ 4.854021] EXT4-fs (mmcblk0p29): recovery complete [ 4.854047] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: (null) [ 4.933154] EXT4-fs (mmcblk0p30): recovery complete [ 4.933180] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: (null) [ 5.004489] EXT4-fs (mmcblk0p31): recovery complete [ 5.004518] EXT4-fs (mmcblk0p31): mounted filesystem with ordered data mode. Opts: (null) [ 5.108567] [ 5.221520] EXT4-fs (mmcblk0p34): recovery complete [ 5.221546] EXT4-fs (mmcblk0p34): mounted filesystem with ordered data mode. Opts: (null) [ 5.311679] EXT4-fs (mmcblk0p38): recovery complete [ 5.311705] EXT4-fs (mmcblk0p38): mounted filesystem with ordered data mode. Opts: (null) After mount_root 12064+0 records in 12064+0 records out [ 5.408593] 131072+0 records in 131072+0 records out [ 5.590444] procd: - early - [ 5.590483] procd: - watchdog - [ 5.708612] [ 6.008630] [ 6.193385] procd: - ubus - [ 6.308647] [ 6.608664] [ 6.908673] [ 7.194664] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available) [ 7.194768] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available) [ 7.202515] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available) [ 7.208681] [ 7.221055] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available) [ 7.222044] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available) [ 7.230847] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available) [ 7.239783] random: ubusd: uninitialized urandom read (4 bytes read, 13 bits of entropy available) [ 7.248771] procd: - init - Please press Enter to activate this console. [ 7.428960] random: lvm: uninitialized urandom read (4 bytes read, 14 bits of entropy available) [ 7.508690] [ 7.808705] [ 8.108716] [ 8.245854] random: lvm: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 8.408758] [ 8.708774] [ 9.008786] [ 9.243694] device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/mmcblk0p27 to dm-req-crypt ok! [ 9.243694] [ 9.283607] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 9.300849] device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/mmcblk0p28 to dm-req-crypt ok! [ 9.300849] [ 9.308801] [ 9.321834] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) WIFI FW is successful [ 9.611125] [ 9.911146] [ 10.097405] [ 10.097405] Loaded tz app Module Successfully! [ 10.097450] [ 10.097450] Loaded Sec Key Module Successfully! [ 10.102142] [ 10.102142] Loaded RSA Sec Key Module Successfully! [ 10.147323] luabase64: module license 'unspecified' taints kernel. [ 10.147352] Disabling lock debugging due to kernel taint [ 10.156181] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 10.163281] Initializing XFRM netlink socket [ 10.164112] NET: Registered protocol family 15 [ 10.211184] [ 10.255662] ssdk_switch_device_num_init[1159]:INFO:ess-switch dts node number: 1 [ 10.255717] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist! [ 10.262119] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: local bus [ 10.268216] ssdk_dt_parse_access_mode[869]:INFO:switchreg_base_addr: 0x3a000000 [ 10.275321] ssdk_dt_parse_access_mode[870]:INFO:switchreg_size: 0x1000000 [ 10.282430] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0xb [ 10.289379] ssdk_dt_parse_mac_mode[304]:INFO:mac mode1 = 0xff [ 10.294761] ssdk_dt_parse_mac_mode[313]:INFO:mac mode2 = 0xf [ 10.300669] ssdk_dt_parse_phy_info[659]:INFO:[PORT 6] port_mac_sel = QGMAC_PORT [ 10.306407] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist! [ 10.313494] ssdk_dt_parse_intf_mac[801]:INFO:dp1 MAC 2c:ea:dc:6b:a3:a3 [ 10.319400] ssdk_dt_parse_intf_mac[801]:INFO:dp2 MAC 2c:ea:dc:6b:a3:a4 [ 10.325943] ssdk_dt_parse_intf_mac[801]:INFO:dp3 MAC 2c:ea:dc:6b:a3:a4 [ 10.332444] ssdk_dt_parse_intf_mac[801]:INFO:dp4 MAC 2c:ea:dc:6b:a3:a4 [ 10.338963] ssdk_dt_parse_intf_mac[801]:INFO:dp5 MAC 2c:ea:dc:6b:a3:a4 [ 10.345486] ssdk_plat_init start [ 10.426349] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully! [ 10.426554] ssdk_probe[2024]:INFO:ess_rst doesn't exist! [ 10.433477] HPPE initializing... [ 10.437971] malibu_phy_api_ops_init[2848]:INFO:qca probe malibu phy driver succeeded! [ 10.444550] qca808x_phy_api_ops_init[2208]:INFO:qca probe qca808x phy driver succeeded! [ 10.449676] qca808x_ptp_register[1407]:INFO:qca808x ptp clock registered [ 10.456593] regi_init[3567]:INFO:Initializing HPPE!! [ 10.511207] [ 10.674471] ssdk_ppe_reset_init[1265]:INFO:ppe reset successfully! [ 10.677524] qca_hppe_tdm_hw_init[684]:INFO:tdm setup num=96 [ 10.679812] qca_hppe_portctrl_hw_init[110]:INFO:Hawkeye PPE port initializing [ 10.811223] [ 11.111232] [ 11.411240] [ 11.711249] [ 12.011258] [ 12.131522] ssdk_switch_register[1718]:INFO:Chip version 0x1500 [ 12.131556] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist [ 12.136247] ssdk_switch_register[1744]:INFO:polling is selected [ 12.144577] regi_init[3571]:INFO:Initializing HPPE Done!! [ 12.150262] regi_init[3631]:INFO:qca-ssdk module init succeeded! [ 12.171426] tun: Universal TUN/TAP device driver, 1.6 [ 12.171448] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 12.180978] EDMA ver 1 hw init [ 12.181739] EDMA HW Reset completed succesfully [ 12.184619] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) [ 12.188988] RxDesc:1 (15-15) RxFill:1 (7-7) [ 12.311267] [ 12.400001] ********************************************************** [ 12.400025] * NSS Data Plane driver [ 12.405426] ********************************************************** [ 12.427884] l2tp_core: L2TP core driver, V2.0 [ 12.429297] l2tp_netlink: L2TP netlink interface [ 12.552339] nss_driver - fw of size 830420 bytes copied to load addr: 40000000, nss_id : 0 [ 12.554092] Supported Frequencies - [ 12.559525] 748.8 MHz 1.4976 GHz [ 12.565488] 1.6896 GHz [ 12.566511] [ 12.568938] ffffffbffd0a7e80: set sdma ffffffc079d0c100 [ 12.570418] ffffffbffd0a7e80: meminfo init succeed [ 12.611281] [ 12.614106] node size 2 # items 4 [ 12.614124] memory: 40000000 2147483648 (avl 1987907584) items 4 active_cores 2 [ 12.616446] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 [ 12.623518] ffffffbffd0a7e80: nss core 0 booted successfully [ 12.631367] nss_driver - fw of size 292100 bytes copied to load addr: 40800000, nss_id : 1 [ 12.637197] Supported Frequencies - [ 12.644334] 748.8 MHz 1.4976 GHz [ 12.650346] 1.6896 GHz [ 12.651521] [ 12.654163] ffffffbffd0aee00: set sdma ffffffc078062b00 [ 12.655281] ffffffbffd0aee00: meminfo init succeed [ 12.663503] sit: IPv6 over IPv4 tunneling driver [ 12.663695] node size 2 # items 4 [ 12.663698] memory: 40000000 2147483648 (avl 1988096000) items 4 active_cores 2 [ 12.663705] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 [ 12.663716] ffffffbffd0aee00: nss core 1 booted successfully [ 12.689685] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded. [ 12.698199] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.703097] gre: GRE over IPv4 demultiplexor driver [ 12.708045] ip_gre: GRE over IPv4 tunneling driver [ 12.713514] ip6_gre: GRE over IPv6 tunneling driver [ 12.718703] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 12.736387] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.743762] rmnet_nss_init(): initializing rmnet_nss [ 12.931794] qcawifi configuration is disable Waiting for kmodloader to complete to start wifi detect [ 15.255319] Netfilter messages via NETLINK v0.30. [ 15.256962] ip_set: protocol 6 [ 17.427557] random: nonblocking pool is initialized [ 17.457500] configuring additional NSS pbufs [ 17.477401] additional pbufs of size 7802880 got added to NSS [ 17.835254] wlan: [2182:I:RPTR] qca_multi_link_init_module: [ 17.835254] ******QCA Repeater Initialization Done*********** [ 17.835254] ******FW ini file not found****** ******No cold_boot_support***** [ 17.983787] wlan: [2190:I:ANY] =======ol_if_register_wifi3_0========== [ 17.983787] [ 17.983823] wlan: [2190:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffdf61c08 [ 17.990824] wlan: [2190:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 [ 18.002424] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss [ 18.019355] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 18.728437] Subsystem error monitoring/handling services are up [ 18.728729] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up [ 18.729151] rpmsg_dev_probe: No pm domain [ 18.729325] rpmsg_dev_probe: No pm domain [ 18.730244] cnss[2]: INFO: QMI WLFW service connected, state: 0x1 [ 18.730418] cnss[2]: INFO: device_id : 65534 mem mode : [0] [ 18.731147] cnss[2]: INFO: platform name: Askey RT5010W-D187/REV6 [ 18.731147] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x0, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x250984a5, fw_build_timestamp: 2022-04-19 04:17, otp_version: 0x0 eeprom_caldata_read_timeout 0s [ 18.731159] cnss[2]: INFO: No board_id entry in device tree [ 18.735332] cnss[2]: INFO: BDF location : 0x4b0c0000 [ 18.735337] cnss[2]: INFO: BDF IPQ8074/bdwlan.bin size 131072 [ 18.735895] cnss[2]: INFO: per device BDF location : 0x4b0e0000 [ 18.735974] cnss[2]: INFO: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 [ 18.808645] wlan: [2190:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 [ 18.816252] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffe, FW ready timeout: 15 seconds [ 18.824047] cnss[2]: INFO: FW ready received for device 0xfffe [ 18.833182] wlan: [2190:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode [ 18.838718] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7 [ 18.855093] wlan: [2190:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4 [ 18.855292] wlan: [2190:I:ANY] __ol_ath_attach: Allocated soc ffffffc075180880 [ 18.862998] wlan: [2190:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully [ 18.890120] wlan: [2190:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA8074.ini; status:4 [ 18.890365] wlan: [2190:E:CONFIG] cfg_uint_item_handler: dp_rxdma_monitor_desc_ring=2048 - Out of range [4096, 16384]; Using 4096 [ 18.899228] wlan: [2190:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc [ 18.910570] wlan: [2190:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 18 [ 18.919781] wlan: [2190:I:ANY] __ol_ath_attach: dev name soc0 [ 18.929337] wlan: [2190:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle ffffffc076178c00 [ 18.937062] wlan: [2190:I:MBSSIE] ol_ath_soc_attach: WPS support with EMA enabled in 6Ghz [ 18.943545] wlan: [2190:I:MBSSIE] ol_ath_soc_attach: Total ema vaps configured: 5 [ 18.943566] wlan: [2180:E:ANY] send_filled_buffers_to_user: Send Failed -3 drop_count = 1 [ 18.959090] wlan: [2190:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 256 ven_ie_size_nibble: 8 [ 18.967251] wlan: [2190:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 256 ven_ie_size_nibble: 8 [ 18.977495] wlan: [2190:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 256 ven_ie_size_nibble: 8 [ 18.987752] wlan: [2190:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 256 ven_ie_size_nibble: 8 [ 18.997981] wlan: [2190:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 256 ven_ie_size_nibble: 8 [ 19.008228] wlan: [2190:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 256 ven_ie_size_nibble: 8 [ 19.018466] wlan: [2190:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 512 ven_ie_size_nibble: 9 [ 19.028729] wlan: [2190:I:ANY] htc_wmi_init: HT Create . ffffffc0767e9000 [ 19.038946] wlan: [2190:I:ANY] htc_wmi_init: Skipping BMI Done [ 19.045715] wlan: [2190:I:ANY] htc_wmi_init: host_enable 0 [ 19.056953] wlan: [2190:I:ANY] ol_ath_soc_rate_stats_attach: enable rdk stats 1 soc: ffffffc075180880 [ 19.056987] wlan: [2190:I:ANY] ol_target_init_complete: CDP soc attach success [ 19.066245] wlan: [2190:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 [ 19.073488] wlan: [2190:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc0767e9000, ep 2, value 1 [ 19.081715] wlan: [2190:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc0767e9000, ep 3, value 1 [ 19.091815] wlan: [89:I:TIF] init_deinit_atf_config_enable: Airtime Fairness: num_peers=0 num_active_peer=0 [ 19.101410] wlan: [89:I:TIF] HE_CAP Info = 9a18010d [ 19.111914] wlan: [89:I:TIF] Num HW modes = 1 [ 19.115778] wlan: [89:I:TIF] Num PHY = 2 [ 19.120269] wlan: [89:I:TIF] FW Build Version (Ext.) = 0 [ 19.124270] wlan: [89:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0 [ 19.129589] wlan: [89:I:TIF] Preferred HW Mode = 1 Num Radios = 2 [ 19.136290] wlan: [89:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 1 phy_id = 0 wireless modes = f97f9001 [ 19.142335] wlan: [89:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 1 phy_id = 1 wireless modes = 680688c [ 19.152967] wlan: [89:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success [ 19.162035] wlan: [89:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success [ 19.169004] wlan: [89:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 19.176113] wlan: [89:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 19.183218] wlan: [89:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 34 [ 19.190809] wlan: [89:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 19.198474] wlan: [89:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 19.205703] wlan: [89:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 34 [ 19.213246] wlan: [89:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 19.220908] wlan: [89:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 19.228185] wlan: [89:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 34 [ 19.235736] wlan: [89:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 [ 19.243367] wlan: [89:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 19.250666] wlan: [89:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17 [ 19.258223] wlan: [89:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:ffffffc076178c00 [ 19.267329] wlan: [89:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 529 vdevs = 17 [ 19.275245] wlan: [89:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 19.284821] wlan: [89:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:1 wmi_handle:ffffffc0734b8800 [ 19.293870] wlan: [89:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 1 Number of peers = 529 vdevs = 17 [ 19.301564] wlan: [89:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 19.411473] wlan: [89:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 [ 19.621913] wlan: [89:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 [ 19.621948] wlan: [89:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 1109, max_ast_index: 4112 [ 19.621948] [ 19.629310] wlan: [2190:I:ANY] ol_ath_connect_htc: WMI is ready [ 19.685294] wlan: [2190:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d [ 19.685327] wlan: [2190:E:NSS] [nss-wifili]: pdev:ffffffc073400880 radio_ifnum:28 scheme_id:0 radio_priority:1 [ 19.698579] wlan: [2190:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL [ 19.703406] wlan: [2190:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d [ 19.710875] wlan: [2190:E:NSS] [nss-wifili]: pdev:ffffffc0734c0880 radio_ifnum:29 scheme_id:1 radio_priority:0 [ 19.725057] wlan: [2190:E:TIF] target_if_lro_hash_config: pdev with id 1 is NULL [ 19.730063] wlan: [2190:I:ANY] ol_ath_soc_attach: connect HTC [ 19.737346] wlan: [2190:I:ANY] ol_ath_soc_attach: bypasswmi : 0 [ 19.742985] wlan: [2190:I:MSCS] qca_mscs_module_init: [ 19.742985] ****QCA MSCS Initialization Done**** SoC ffffffc075180880 [ 19.748726] wlan: [2190:I:ANY] ol_ath_soc_attach: UMAC attach [ 19.760572] wlan: [2190:I:ANY] __ol_ath_attach: pdev_netdev name wifi0 [ 19.766164] wlan: [2190:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target [ 19.773174] wlan: [2190:I:ANY] __ol_ath_attach: BURSTING enabled by default [ 19.779847] wlan: [2190:I:ANY] ol_ath_pdev_attach: interface_id 0 [ 19.786472] wlan: [2190:I:TIF] ol_ath_pdev_regdmn_init: phy id = 0 Modes supported [ 19.792711] wlan: [2190:I:TIF] ol_ath_pdev_regdmn_init: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 [ 19.800192] wlan: [2190:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 0 supp_bnd = 2, modes = 793f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4900, hi_5g = 5920 [ 19.809923] wlan: [2190:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 793f9001 before update [ 19.824074] wlan: [2190:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 793f9001 after update [ 19.833264] wlan: [2190:I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case [ 19.842088] wlan: [2190:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 2e:ea:dc:6b:a3:a2 soc: soc0 pdev: wifi0 [ 19.849392] wlan: [2190:I:MBSSIE] ieee80211_mbss_attach: :> [ 19.860945] wlan: [2190:I:MBSSIE] ieee80211_mbss_attach: :< [ 19.866503] wlan: [2190:I:ANY] ol_resmgr_create: OL Resmgr Init-ed [ 19.872167] wlan: [2190:I:ANY] acfg_attach: acfg_attach: 3323: Netlink socket created:ffffffc07617a800 [ 19.878323] wlan: [2190:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 [ 19.888384] wlan: [2190:I:ANY] wlan_scan_update_channel_list: num_chan: 25 [ 19.894497] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[1], ptr:ffffffbffdbbc560 [ 19.901298] pdev(ffffffc073785010) Enabling DBDC Repeater 0 soc_lag ffffffc079edd700 [ 19.909229] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(ffffffc073785010) is_primary 0 [ 19.917338] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 19.917339] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled [ 19.918588] wlan: [2190:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5 [ 19.918588] [ 19.918621] wlan: [2190:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty [ 19.918632] wlan: [2190:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 32768 [ 19.918671] wlan: [2190:I:ANY] __ol_ath_attach: needed_headroom reservation 60 [ 19.918677] wlan: [2190:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41 [ 19.918854] wlan: [2190:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0xffffffc073400880, wdev: 0xffffffc073418948, wiphy: 0xffffffc06fa102a0, netdev: 0xffffffc073400000 [ 19.919296] wlan: [2190:I:ANY] __ol_ath_attach: pdev_netdev name wifi1 [ 19.919313] wlan: [2190:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target [ 19.919897] wlan: [2190:I:ANY] __ol_ath_attach: BURSTING enabled by default [ 19.919944] wlan: [2190:I:ANY] ol_ath_pdev_attach: interface_id 1 [ 19.919957] wlan: [2190:I:TIF] ol_ath_pdev_regdmn_init: phy id = 1 Modes supported [ 19.919963] wlan: [2190:I:TIF] ol_ath_pdev_regdmn_init: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 [ 19.919971] wlan: [2190:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 [ 19.919976] wlan: [2190:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update [ 19.919981] wlan: [2190:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update [ 19.919989] wlan: [2190:I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case [ 19.920019] wlan: [2190:I:ANY] ol_ath_pdev_regdmn_init: LDPC not supported in 5G HE CAP [ 19.920036] wlan: [2190:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 2e:ea:dc:6b:a3:a1 soc: soc0 pdev: wifi1 [ 19.920103] wlan: [2190:I:MBSSIE] ieee80211_mbss_attach: :> [ 19.920108] wlan: [2190:I:MBSSIE] ieee80211_mbss_attach: :< [ 19.920114] wlan: [2190:I:ANY] ol_resmgr_create: OL Resmgr Init-ed [ 19.920226] wlan: [2190:I:ANY] acfg_attach: Offload using existing sock ffffffc07617a800 [ 19.920241] wlan: [2190:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 [ 19.920423] wlan: [2190:I:ANY] wlan_scan_update_channel_list: num_chan: 11 [ 19.920456] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[2], ptr:ffffffbffdbbc560 [ 19.920491] pdev(ffffffc073216010) Enabling DBDC Repeater 0 soc_lag ffffffc079edd700 [ 19.920492] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(ffffffc073216010) is_primary 0 [ 19.921970] wlan: [2190:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 1, REO dest ring = 5 [ 19.921970] [ 19.922002] wlan: [2190:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty [ 19.922013] wlan: [2190:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 1 tx_desc_limit = 32768 [ 19.922045] wlan: [2190:I:ANY] __ol_ath_attach: needed_headroom reservation 60 [ 19.922052] wlan: [2190:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi1 features 41 [ 19.922070] wlan: [2190:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11 [ 19.922208] wlan: [2190:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0xffffffc0734c0880, wdev: 0xffffffc0734d8948, wiphy: 0xffffffc06fa13aa0, netdev: 0xffffffc0734c0000 [ 19.922580] wlan: [2190:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 1 [ 19.922769] wlan: [2190:E:QLD] qld_register: Handle or address is NULL [ 19.922791] wlan: [2190:I:ANY] wlan_pdev_operation: num_radios=1, wifi_radios[0].sc = ffffffc073400880_radio_type = 2 [ 19.922798] wlan: [2190:I:ANY] wlan_pdev_operation: num_radios=2, wifi_radios[1].sc = ffffffc0734c0880_radio_type = 2 [ 19.922823] wlan: [2190:I:ANY] init_ath_pci_3_0: 6ath_ol_pci_wifi3.0 : (Atheros/multi-bss) [ 20.284951] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 20.293852] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled [ 20.436515] wlan: [2201:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffe131068 [ 20.436961] wlan: [2201:I:ANY] init_ath_pci_2_0: 6ath_ol_pci_2_0: (Atheros/multi-bss) No Direct-Attach chipsets found. acfg_tool: Issuing blocking call to wait for events acfg_tool: Issuing blocking call to wait for events No qca-mad module enabled **** Platform Name: ap ***** Copy ART caldata from /dev/mmcblk0p17 to /tmp/virtual_art.bin VERIFY_IB: Success. verify IB ok