Secure key does not exist HWCONF is 1f enable r2c_rd_bypass_wt

AN7583DRAMC V0.6 init_times = 0 MPLL setting done !!! dram_type = PCDDR4, data_rate = 2133 DIV mode = 1 [Dramc] PCDDR AC Timing update APHY RG Setting DelayCellTimex100 (cell=1078) MRW RK0 MR#2 = 0xf0 MRW RK0 MR#3 = 0x200 MRW RK0 MR#1 = 0x101 MRW RK0 MR#4 = 0x800 MRW RK0 MR#5 = 0x400 MRW RK0 MR#6 = 0xca0 MRW RK0 MR#6 = 0xca0 MRW RK0 MR#6 = 0xc20 MRW RK0 MR#0 = 0xb44 [Dramc] PCDDR AC Timing update DRVP driving setting info: 0x41 ODTP driving setting info: 0x41 DRVN driving setting info: 0x41 ODTN driving setting info: 0x41 MRW RK0 MR#2 = 0xf0 MRW RK0 MR#1 = 0x181 MRW RK0 MR#1 = 0x101 MRW RK0 MR#2 = 0xf0 MRW RK0 MR#3 = 0x204 MRW RK0 MR#3 = 0x200 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc00 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc82 MRW RK0 MR#6 = 0xc02 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc84 MRW RK0 MR#6 = 0xc04 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc86 MRW RK0 MR#6 = 0xc06 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc88 MRW RK0 MR#6 = 0xc08 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc8a MRW RK0 MR#6 = 0xc0a MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc8c MRW RK0 MR#6 = 0xc0c MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc8e MRW RK0 MR#6 = 0xc0e MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc90 MRW RK0 MR#6 = 0xc10 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc92 MRW RK0 MR#6 = 0xc12 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc94 MRW RK0 MR#6 = 0xc14 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc96 MRW RK0 MR#6 = 0xc16 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc98 MRW RK0 MR#6 = 0xc18 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc9a MRW RK0 MR#6 = 0xc1a MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc9c MRW RK0 MR#6 = 0xc1c MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc9e MRW RK0 MR#6 = 0xc1e MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca0 MRW RK0 MR#6 = 0xc20 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca2 MRW RK0 MR#6 = 0xc22 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca4 MRW RK0 MR#6 = 0xc24 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca6 MRW RK0 MR#6 = 0xc26 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca8 MRW RK0 MR#6 = 0xc28 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcaa MRW RK0 MR#6 = 0xc2a MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcac MRW RK0 MR#6 = 0xc2c MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcae MRW RK0 MR#6 = 0xc2e MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcb0 MRW RK0 MR#6 = 0xc30 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcb2 MRW RK0 MR#6 = 0xc32 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc9f MRW RK0 MR#6 = 0xc1f -- init_times = 0 init_times = 1 MPLL setting done !!! dram_type = PCDDR4, data_rate = 2666 DIV mode = 1 [Dramc] PCDDR AC Timing update APHY RG Setting DelayCellTimex100 (cell=1086) MRW RK0 MR#2 = 0xf0 MRW RK0 MR#3 = 0x200 MRW RK0 MR#1 = 0x101 MRW RK0 MR#4 = 0x800 MRW RK0 MR#5 = 0x400 MRW RK0 MR#6 = 0xca0 MRW RK0 MR#6 = 0xca0 MRW RK0 MR#6 = 0xc20 MRW RK0 MR#0 = 0xb44 [Dramc] PCDDR AC Timing update DRVP driving setting info: 0x41 ODTP driving setting info: 0x41 DRVN driving setting info: 0x41 ODTN driving setting info: 0x41 MRW RK0 MR#2 = 0xf0 MRW RK0 MR#1 = 0x181 MRW RK0 MR#1 = 0x101 MRW RK0 MR#2 = 0xf0 MRW RK0 MR#3 = 0x204 MRW RK0 MR#3 = 0x200 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc00 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc82 MRW RK0 MR#6 = 0xc02 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc84 MRW RK0 MR#6 = 0xc04 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc86 MRW RK0 MR#6 = 0xc06 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc88 MRW RK0 MR#6 = 0xc08 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc8a MRW RK0 MR#6 = 0xc0a MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc8c MRW RK0 MR#6 = 0xc0c MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc8e MRW RK0 MR#6 = 0xc0e MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc90 MRW RK0 MR#6 = 0xc10 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc92 MRW RK0 MR#6 = 0xc12 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc94 MRW RK0 MR#6 = 0xc14 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc96 MRW RK0 MR#6 = 0xc16 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc98 MRW RK0 MR#6 = 0xc18 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc9a MRW RK0 MR#6 = 0xc1a MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc9c MRW RK0 MR#6 = 0xc1c MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xc9e MRW RK0 MR#6 = 0xc1e MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca0 MRW RK0 MR#6 = 0xc20 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca2 MRW RK0 MR#6 = 0xc22 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca4 MRW RK0 MR#6 = 0xc24 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca6 MRW RK0 MR#6 = 0xc26 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca8 MRW RK0 MR#6 = 0xc28 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcaa MRW RK0 MR#6 = 0xc2a MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcac MRW RK0 MR#6 = 0xc2c MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcae MRW RK0 MR#6 = 0xc2e MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcb0 MRW RK0 MR#6 = 0xc30 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xcb2 MRW RK0 MR#6 = 0xc32 MRW RK0 MR#6 = 0xc80 MRW RK0 MR#6 = 0xca0 MRW RK0 MR#6 = 0xc20 -- init_times = 1 RBUS out of order setting. BG_num = 2 DRAM FLOW DONE!!! diable auth Secure key does not exist L2C_type:256K_L2C L1D cache size: 32 KB (with set/asso/line==128/4/64) L1I cache size: 32 KB (with set/asso/line==256/2/64) L2U cache size: 256 KB (with set/asso/line==256/16/64) diable auth

U-Boot (Mar 01 2025 - 22:59:26)

DRAM: 512 MiB AN7583DT Now running in RAM - U-Boot at: 9fdd6000 spi_nand_probe: mfr_id=0xc8, dev_id=0x92 Support SPI NAND erase statistic. Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_GD5F2GM7UExxG, Flash Size=0x10000000 bmt pool size: 143 BMT & BBT Init Success FDT_MAGIC or IH_MAGIC check fail. Parse second image fail. NAND: 0 MiB In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:000000009fe36030 rfb_id1=0 rfb_id2=00 rfb_cfg=000,112,005,005,000,aaa,bbb serdes_pon=000 serdes_ethernet=112 serdes_wifi1=005 serdes_wifi2=005 serdes_usb1=000 Net: ecnt_eth

             Uip activated

No “gpio_active_high” at env file

boardid:XG040GMF power_gpio_1:ff power_gpio_2:19 ASB_FLAG_OFFSET = 0x5240000 ASB_FLAGBACK_OFFSET = 0x5280000 cur flag info* active = 0 curimg = 0 startok = 0 count = 12 new flag info* active = 0 curimg = 0 startok = 0 count = 11 Hit any key to stop autoboot: 0 ######nsb_img_info.curimg =0

bootflag==0 -→ booting from Main Image Reading kernel... set board_args to PD RI_boardid:XG040GMF boardid:XG040GMF boardargs:0cffffff:00000000 dram size is limited to 512M bootm flag=0, states=70f ## Loading kernel from FIT Image at 81800000 ...

 Using 'conf@1' configuration
 Trying 'kernel@1' kernel subimage
   Description:  ECONET Linux kernel
   Type:         Kernel Image
   Compression:  lzma compressed
   Data Start:   0x81802e30
   Data Size:    3874192 Bytes = 3.7 MiB
   Architecture: AArch64
   OS:           Linux
   Load Address: 0x80088000
   Entry Point:  0x80088000
   Hash algo:    sha1
   Hash value:   4f6a691725f9a807ffd1a541caab640b8e1aad43
 Verifying Hash Integrity ... sha1+ OK

## Loading fdt from FIT Image at 81800000 ...

 Using 'conf@1' configuration
 Trying 'fdt@1' fdt subimage
   Description:  ECONET Flattened Device Tree blob
   Type:         Flat Device Tree
   Compression:  uncompressed
   Data Start:   0x818000fc
   Data Size:    11446 Bytes = 11.2 KiB
   Architecture: AArch64
 Verifying Hash Integrity ... OK
 Booting using the fdt blob at 0x818000fc
 Uncompressing Kernel Image ... OK
 Loading Device Tree to 000000009ddca000, end 000000009ddcfcb5 ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0000000000 [0x410fd034] Linux version 5.4.55 (buildmgr@AONTDH129) (gcc version 10.3.0 (Buildroot -gd7e7e55)) #1 SMP Sat Mar 1 23:02:04 CST 2025 Machine model: airoha,an7583 earlycon: ecnt0 at MMIO 0x000000001fbf0000 (options '') printk: bootconsole [ecnt0] enabled uboot rfb_cfg:000,112,005,005,000,aaa,bbb parse rfb_no error:0 Malformed early option 'rfb_no' efi: Getting EFI parameters from FDT: efi: UEFI not found. QDMA LAN buffer_size = 0x1000000 qdma_lan_res_phy_addr = 0x9f000000 QDMA WAN buffer_size = 0x500000 qdma_wan_res_phy_addr = 0x9eb00000 ppe_res_phy_addr = 0x9e600000 [npu_wifi_offload_set_pkt_buf_addr]npu_pkt_buf_addr=9e000000:9e000000 npu_pkt_buffer memblock_alloc:9e000000,buf_size=600000 npu_ba_node memblock_alloc:9de00000,buf_size=200000 On node 0 totalpages: 130752 psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. psci: SMC Calling Convention v1.0 Number of cores (4) exceeds configured maximum of 2 - clipping percpu: Embedded 21 pages/cpu s45464 r8192 d32360 u86016 Detected VIPT I-cache on CPU0 CPU features: detected: ARM erratum 845719 CPU features: detected: GIC system register CPU interface Built 1 zonelists, mobility grouping on. Total pages: 128705 Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=00:AA:BB:01:23:40 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=07 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=62 qdma_init=20b9 root=/dev/mtdblock3 ro console=ttyS0,115200n8 earlycon bootflag=0 dram_limit=512M srdsPortCnt=5 srdsParmCntPerPort=3 srdsIfNameAllComp=11,NONE,XFI,USXGMII,HSGMII,PON,PCIE_G3_1LANE,PCIE_G2_1LANE,USB3.0,USB2.0_only,HSGMII+USB2.0,5G_BaseR srdsPortNameAllComp=1,2,3,4,5 srdsEtherTypeAllComp=3,NONE,LAN,WAN srdsEtherPhyTypeAllComp=7,NONE,an8811,A,B,C,D,E srdsPortCombo=05,04,01,02,03,00,05,01,02,03,0a,00,06,05,06,03,02,01,00,06,05,06,03,02,01,00,03,07,09,00 rfb_cfg=000,112,005,005,000,aaa,bbb rfb_no=rfb_defult rfb_id1=0 rfb_id2=00 board_args=0cffffff:00000000 tclinux_info=0x20b3aff,0x4e30,0x3b1d90,0x3b6cbc,0x1cfeb03,0x0,0x2000,0x0,0x2000,0x0 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 450424K/523008K available (9692K kernel code, 420K rwdata, 1828K rodata, 2048K init, 5117K bss, 72584K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 rcu: Hierarchical RCU implementation. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 64 GICv3: GIC: Using split EOI/Deactivate mode GICv3: 256 SPIs implemented GICv3: 0 Extended SPIs implemented GICv3: Distributor has no Range Selector support GICv3: 16 PPIs implemented GICv3: no VLPI support, no direct LPI support GICv3: CPU0: found redistributor 0 region 0:0x0000000009080000 random: get_random_bytes called from start_kernel+0x2ac/0x3cc with crng_init=0 arch_timer: cp15 timer(s) running at 25.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns printk: console [ttyS0] enabled printk: console [ttyS0] enabled printk: bootconsole [ecnt0] disabled printk: bootconsole [ecnt0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 LSM: Security Framework initializing Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) Unable to find CPU node for /cpus/cpu@2 /cpus/cpu-map/cluster0/core2: Can't get CPU for leaf core ASID allocator initialised with 32768 entries rcu: Hierarchical SRCU implementation. gic-its@09020000: unable to locate ITS domain gic-its@09020000: Unable to locate ITS domain EFI services will not be available. smp: Bringing up secondary CPUs ... Detected VIPT I-cache on CPU1 GICv3: CPU1: found redistributor 1 region 0:0x00000000090a0000 CPU1: Booted secondary processor 0x0000000001 [0x410fd034] smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated. CPU features: detected: 32-bit EL0 Support CPU features: detected: CRC32 instructions CPU: All CPU(s) started at EL2 alternatives: patching kernel code Registered cp15_barrier emulation handler Registered setend emulation handler clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) DMI not present or invalid. NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic allocations hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. dying gasp handler list init !

l2c_sram_size:0x0

serdes_common_phy_probe common platform_get_irq 135 serdes_common_phy→G3_ana_phy_rg_base= ffffffc010041000 serdes_common_phy→G3_pma_phy_rg_base= ffffffc010043000 serdes_common_phy→xfi_ana_pxp_phy_rg_base= ffffffc010045000 serdes_common_phy→xfi_pma_phy_rg_base= ffffffc01004d000 serdes_common_phy→pon_ana_pxp_phy_rg_base= ffffffc010055000 serdes_common_phy→pon_pma_phy_rg_base= ffffffc01005d000 serdes_common_phy→multi_sgmii_base= ffffffc010065000 serdes_common_phy→qp_pcie_ana_base= ffffffc01006d000 serdes_common_phy→qp_pcie_dig_base= ffffffc010075000 serdes_common_phy→qp_pcie_pma_base= ffffffc01007d000 serdes_common_phy→qp_usb_ana_base= ffffffc010085000 serdes_common_phy→qp_usb_dig_base= ffffffc01136c000 serdes_common_phy→qp_usb_pma_base= ffffffc01136e000 Initializing Ecnt Event Netlink Socket Initializing Econet Event Netlink Socket nl_sk = (ptrval) ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered iommu: Default domain type: Translated usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb

common_phy Get_Base:0x1fa6f000

common_phy Get_Base:0x1fa6a000

common_phy Get_Base:0x1fa6e000 ecnt_usb→uphy_base = 1152c000 NET: Registered protocol family 8 NET: Registered protocol family 20 clocksource: Switched to clocksource arch_sys_counter thermal_sys: Registered thermal governor 'step_wise'NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 64 ETH xsgmii_drv_probe sgmii:int_id: 0 ETH Serdes xsgmii_get_base sgmii:int_name: eth_usxgmii irq = 89 ETH_xsgmii region= 5,8,8 ETH_xsgmii→pcs1_base= 0xffffffc01152f900 ETH_xsgmii→pcs2_base= 0xffffffc011531a00 ETH_xsgmii→an_base= 0xffffffc011533000 ETH_xsgmii→ra_base= 0xffffffc011535000 ETH_xsgmii→multi_sgmii_base= 0xffffffc011537000 xsgmii_init: start eth_usxgmii_fpga usxgmii: sgmii_serdes_sel: exit! XPON xsgmii_drv_probe sgmii:int_id: 0 PON Serdes xsgmii_get_base

common_phy Get_Base:0x1fa84000 sgmii:int_name: xpon_usxgmii irq = 87 XOPN_xsgmii region= 4 XOPN_xsgmii→pcs1_base= 0xffffffc011539900 XOPN_xsgmii→pcs2_base= 0xffffffc01153ba00 XOPN_xsgmii→an_base= 0xffffffc01153d000 XOPN_xsgmii→ra_base= 0xffffffc01153f000 XOPN_xsgmii→multi_sgmii_base= 0xffffffc010065000 xsgmii_init: start eth_usxgmii_fpga usxgmii: sgmii_serdes_sel: exit! USB xsgmii_drv_probe

common_phy Get_Base:0x1fa6a000

common_phy Get_Base:0x1fa6e000

common_phy Get_Base:0x1fa6f000 sgmii:int_name: sgmii_usb0 sgmii:int_id: 0 usb_xsgmii→pcs2_base= 0xffffffc011541a00 usb_xsgmii→an_base= 0xffffffc011543000 usb_xsgmii→ra_base= 0xffffffc011545000 usb_xsgmii→multi_sgmii_base= 0xffffffc011547000 usb_xsgmii→dig_base= 0xffffffc01136c000 usb_xsgmii→pma_sgmii_base= 0xffffffc01136e000 usb_xsgmii→phya_base= 0xffffffc010085000 PCIE1 xsgmii_drv_probe

common_phy Get_Base:0x1fa5a000

common_phy Get_Base:0x1fa5e000

common_phy Get_Base:0x1fa5f000 sgmii:int_name: sgmii_pcie1 sgmii:int_id: 0 pcie1_xsgmii→pcs2_base= 0xffffffc011549a00 pcie1_xsgmii→an_base= 0xffffffc01154b000 pcie1_xsgmii→ra_base= 0xffffffc01154d000 pcie1_xsgmii→multi_sgmii_base= 0xffffffc01154f000 pcie1_xsgmii→dig_base= 0xffffffc010075000 pcie1_xsgmii→pma_sgmii_base= 0xffffffc01007d000 pcie1_xsgmii→phya_base= 0xffffffc01006d000 PCIE0 xsgmii_drv_probe PCIE0 Serdes xsgmii_get_base sgmii:int_name: p2l_usxgmii sgmii:int_id: 0 irq = 88 p0_xsgmii region= 5 p0_xsgmii→pcs1_base[0]= 0xffffffc011551900 p0_xsgmii→pcs2_base[0]= 0xffffffc011553a00 p0_xsgmii→an_base[0]= 0xffffffc011555000 p0_xsgmii→ra_base[0]= 0xffffffc011557000 p0_xsgmii→multi_sgmii_base[0]= 0xffffffc011559000 p0_xsgmii→phya_base[0]= 0x0 p0_xsgmii→pma_base[0]= 0x0 xsgmii_init: start eth_usxgmii_fpga usxgmii: sgmii_serdes_sel: exit! xsgmii_proc_init TC3162 hardware watchdog module loaded. [gsw ptp] ecnt_ptp_drv_probe [1588v2 ptp] ecnt_gsw_ptp_base : 0xffffffc0115ce000 [1588v2 ptp] ecnt_ptp→gsw_ptp_base : 0xffffffc0115ce000 [1588v2 ptp] ecnt_ptp→xfi_ptp_base : 0xffffffc011569500 [1588v2 ptp] ecnt_ptp→xfi_pon_ptp_base : 0xffffffc011575500 [1588v2 ptp] ecnt_ptp→irq[0] : 0x7e [1588v2 ptp] ecnt_ptp→irq[1] : 0x7f [1588v2 ptp] ecnt_ptp→irq[2] : 0x80 ecnt-npu 1e800000.npu: ecnt_npu use 1GB DMA for coherent map irq-0: 130 irq-1: 131 (ecnt_pon_phy_probe) probe start (ecnt_pon_phy_probe) rg_base1= 0x115c2000 (ecnt_pon_phy_probe) rg_base2= 0x115d1000 (ecnt_pon_phy_probe) rg_base3= 0x115d3000

common_phy Get_Base:0x1fa7a000 base addr not 10G Serdes or QPHY Common addr!ex: 0x1fc7f000, 0x1fa7f000, 0x1fa8f000

common_phy Get_Base:0x1fa7b000 base addr not 10G Serdes or QPHY Common addr!ex: 0x1fc7f000, 0x1fa7f000, 0x1fa8f000

common_phy Get_Base:0x1fa8a000 base addr not 10G Serdes or QPHY Common addr!ex: 0x1fc7f000, 0x1fa7f000, 0x1fa8f000

common_phy Get_Base:0x1fa8b000 base addr not 10G Serdes or QPHY Common addr!ex: 0x1fc7f000, 0x1fa7f000, 0x1fa8f000 dying gasp handler crypto registered! [crypto_k] res→name:crypto_k@1fb70000 [crypto_k] res→start:0x1fb70000 === [crypto_k] res→end:0x1fb70803 === [crypto_k] ecnt_crypto_k→base:0xffffffc0115d5000 test_uc:(ptrval) test_c:(ptrval) cpu_top→base:(ptrval) [apb_timer] ecnt_timer_drv_probe ecnt-timer 1fbf0100.apb_timer1: IRQ index 4 not found ecnt-timer 1fbf0100.apb_timer1: IRQ index 5 not found ecnt-timer 1fbf0100.apb_timer1: IRQ index 6 not found ecnt-timer 1fbf0100.apb_timer1: IRQ index 7 not found [timer] res→name:apb_timer1@1fbf0100

i2c_slave init(ecnt_i2c_slave_drv_probe) done dying gasp handler gdump registered! [i2s] ecnt_i2s_drv_probe

ecnt_olt_phy_probe start (ecnt_olt_phy_probe) rg_base1= 0x115ea000 (ecnt_olt_phy_probe) rg_base2= 0x115ec800 (ecnt_olt_phy_probe) rg_base3= 0x115ee900 7583 Thermal PHY probe Start Ver 1.1.240605 7583 Thermal Sensor address probe done thermal_phy addr:ffffffc0115f0000[thermal] thermal_phy→irq: 141 irq-0: 138 irq-0: 139 pbus_monitor init(ecnt_pbus_monitor_drv_probe) done ecnt-xsi 1fa08000.xsi: IRQ index 0 not found ecnt-xsi 1fa08000.xsi: IRQ index 1 not found ecnt-xsi 1fa08000.xsi: IRQ index 2 not found [trng] ecnt_trng_drv_probe [i2c] ecnt_i2c_drv_probe [i2c] ecnt_i2c_drv_probe workingset: timestamp_bits=62 max_order=17 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs3: Max link count 4000 ntfs3: Read-only LZX/Xpress compression included jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler mq-deadline registered io scheduler kyber registered PCIe phy driver version: 7583.2.20240912 PLL Kband

common_phy Get_Base:0x1fc7f000

common_phy Get_Base:0x1fc7e000

common_phy Get_Base:0x1fa5f000

common_phy Get_Base:0x1fa5a000

common_phy Get_Base:0x1fa5e000 PCIe_phy_drv_probe finish

pcie_probe0==0523===11

7583 wifi_serdes_select: enter PCIe_port_num=0 ! 7583 wifi_serdes_select: !!!not for pcie serdes_ret=5 ! 7583 wifi_serdes_select: exit serdes_ret=5 ret=1 ! mtk-pcie: probe of 1fc20000.pcie0 failed with error 1 7583 wifi_serdes_select: enter PCIe_port_num=0 ! 7583 wifi_serdes_select: !!!not for pcie serdes_ret=5 ! 7583 wifi_serdes_select: exit serdes_ret=5 ret=1 ! mtk-pcie1: probe of 1fa92000.pcie1 failed with error 1 ttyS0 at I/O 0xbfbf0000 (irq = 0, base_baud = 7200) is a TC3162 ECNT ring buffer init success dying gasp handler uart registered! brd: module loaded loop: module loaded ecnt-snor snor: ecnt_snor_drv_probe failed to init spi nfi ecnt-snor: probe of snor failed with error -1 IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6) spi_nand_probe: mfr_id=0xc8, dev_id=0x92 Support SPI NAND erase statistic. Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_GD5F2GM7UExxG, Flash Size=0x10000000

Block: bad=4, total=2048, bad rate:(19 / 10000). spi nand flash tc3162: flash device 0x02000000 at 0x00000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x92 nand: ESMT _SPI_NAND_DEVICE_ID_GD5F2GM7UExxG nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: NAND_ECC_NONE selected by board driver. This is not recommended! nand_scan_ident ok [spi_nand_setup]: chip size = 0x10000000, erase_shift=0x11 bmt pool size: 143 BMT & BBT Init Success #########tc3162_parts_size=17###trx_size=256######### master kernel_size = 0x3b1d90 kernel_offset = 0x4e30 rootfs_size=0x1cfeb03 rootfs_offset=0x3b6cbc Creating 17 MTD partitions on “EN7512-SPI_NAND”: 0x000000000000-0x000000080000 : “bootloader” 0x000000080000-0x0000000c0000 : “romfile” 0x0000000c0000-0x000000476cc0 : “kernel” mtd: partition “kernel” doesn't end on an erase/write block -- force read-only 0x000000476dbc-0x000002176dbc : “rootfs” mtd: partition “rootfs” doesn't start on an erase/write block boundary -- force read-only 0x000002940000-0x000002dc0000 : “kernel_slave” 0x000002dc0000-0x0000051c0000 : “rootfs_slave” 0x0000051c0000-0x000005200000 : “bosa” 0x000005200000-0x000005240000 : “ri” 0x000005240000-0x000005280000 : “flag” 0x000005280000-0x0000052c0000 : “flagback” 0x0000052c0000-0x000005cc0000 : “config” 0x000005cc0000-0x00000dda0000 : “data” 0x00000dda0000-0x00000e1a0000 : “oopsfs” 0x00000e1a0000-0x00000eba0000 : “log” 0x0000000c0000-0x000002940000 : “nsb_master” 0x000002940000-0x0000051c0000 : “nsb_slave” 0x000000000000-0x00000eba0000 : “all_flash” active = 0 asb_curimg = 0 asb_startok = 0 asb_count = 11 start rootfs select img A 3 libphy: Fixed MDIO Bus: probed PPP generic driver version 2.4.5 PPP BSD Compression module registered PPP Deflate Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 USB driver version: 7583.7.20241007 USB efuse vaild = 0x3 SSUSB_TX_TERM_SEL = 0x0 SSUSB_RX_IMP_SEL = 0xe USB20_P0_INTR_CTRL = 0x18 USB20_P1_INTR_CTRL = 0x18 Read USB efuse vaild U3 serdes sel : 0 Kand Band Code : 0xa2b Bring U3 Port 1 init port 1 u2_slew_rate_cal_7583 FM_OUT value = 114(0x00000072) SR calibration value = 5 port 2 u2_slew_rate_cal_7583 FM_OUT value = 113(0x00000071) SR calibration value = 5 USB PHY Init Complete dying gasp handler usb registered! xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 xhci-hcd 1fab0000.xhci: irq 132, io mem 0x1fab0000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ch341 usbserial: USB Serial support registered for ch341-uart usbcore: registered new interface driver cp210x usbserial: USB Serial support registered for cp210x usbcore: registered new interface driver cypress_m8 usbserial: USB Serial support registered for DeLorme Earthmate USB usbserial: USB Serial support registered for HID→COM RS232 Adapter usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 msdc_drv_probe 2058 mtk-msdc: probe of 1fa0e000.mmc failed with error -22 hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver exFAT: Version 1.3.0 IPv4 over IPsec tunneling driver ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers tc3162ser_startup VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 2048K Run /sbin/init as init process touch: /tmp/mount.log: Read-only file system mknod: /dev/misc/fuse: No such file or directory /dev/misc/fuse create faild! touch: /tmp/mount.log: Read-only file system nand_drv: loading out-of-tree module taints kernel. install nand_drv driver! read 512 bytes from /dev/mtdblock7 ri module install BoardInnerID=XG040GMF. [hcfg] try to load /usr/hwconfig/XG040GMF/hcfg.conf End: node_index = 104, HcfgNodeCnts = 104 board_dev module install HBSC ubi2: default fastmap pool size: 8 ubi2: default fastmap WL pool size: 4 ubi2: attaching mtd13 ubi2: scanning is finished ubi2: attached mtd13 (name “log”, size 10 MiB) ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi2: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi2: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1459546911 ubi2: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 0 ubi2: background thread “ubi_bgt2d” started, PID 244 UBI device number 2, total 80 LEBs (10158080 bytes, 9.7 MiB), available 0 LEBsrandom: fast init done (0 bytes), LEB size 126976 bytes (124.0 KiB) UBIFS (ubi2:0): Mounting in unauthenticated mode UBIFS (ubi2:0): background thread “ubifs_bgt2_0” started, PID 247 UBIFS (ubi2:0): recovery needed UBIFS (ubi2:0): recovery completed UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name “logs” UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi2:0): FS size: 8126464 bytes (7 MiB, 64 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi2:0): reserved for root: 383832 bytes (374 KiB) UBIFS (ubi2:0): media format: w5/r0 (latest is w5/r0), UUID 68B46ED9-111C-4D85-98D6-4D490D290B93, small LPT model ###syslog_boot.sh### boot syslogd. syslogd starting 1970-01-01 00:00:05 [Informational] started: BusyBox v1.16.0 klogd starting 1970-01-01 00:00:05 [Notice] klogd started: BusyBox v1.16.0 () syslog storageMode is flash 1970-01-01 00:00:05 [Informational] ecnt-npu 1e800000.npu: ecnt_npu use 1GB DMA for coherent map 1970-01-01 00:00:05 [Informational] workingset: timestamp_bits=62 max_order=17 bucket_order=0 1970-01-01 00:00:05 [Informational] squashfs: version 4.0 (2009/01/31) Phillip Lougher 1970-01-01 00:00:05 [Informational] ntfs3: Max link count 4000 1970-01-01 00:00:05 [Informational] ntfs3: Read-only LZX/Xpress compression included 1970-01-01 00:00:05 [Informational] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. 1970-01-01 00:00ubi1: default fastmap pool size: 8 ubi1: default fastmap WL pool size: 4 ubi1: attaching mtd10 :05 [Informational] io scheduler mq-deadline registered 1970-01-01 00:00:05 [Informational] io scheduler kyber registered 1970-01-01 00:00:05 [Informational] ttyS0 at I/O 0xbfbf0000 (irq = 0, base_baud = 7200) is a TC3162 1970-01-01 00:00:05 [Infoubi1: scanning is finished rmational] brd: module loaded 197ubi1: attached mtd10 (name “config”, size 10 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1450133875 ubi1: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 0 ubi1: background thread “ubi_bgt1d” started, PID 291 0-01-01 00:00:05 [Informational] loop: module loaded 1970-01-01 00:00:05 [Informational] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x92 1970-01-01 00:00:05 [Informational] nand: ESMT _SPI_NAND_DEVICE_ID_GD5F2GM7UExxG 1970-01-01 00:00:05 [Informational] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 1970-01-01 00:00:05 [Notice] Creating 17 MTD partitions on “EN7512-SPI_NAND”: 1970-01-01 00:00:05 [Notice] 0x000000000000-0x000000080000 : “bootloader” 1970-01-01 00:00:05 [Notice] 0x000000080000-0x0000000c0000 : “romfile” 1970-01-01 00:00:05 [Notice] 0x0000000c0000-0x000000476cc0 : “kernel” 1970-01-01 00:00:05 [Notice] 0x000000476dbc-0x000002176dbc : “rootfs” 1970-01-01 00:00:05 [Notice] 0x000002940000-0x000002dc0000 : “kernel_slave” 1970-01-01 00:00:05 [Notice] 0x000002dc0000-0x0000051c0000 : “rootfs_slave” 1970-01-01 00:00:05 [Notice] 0x0000051c0000-0x000005200000 : “bosa” 1970-01-01 00:00:05 [Notice] 0x000005200000-0x000005240000 : “ri” 1970-01-01 00:00:05 [Notice] 0x000005240000-0x000005280000 : “flag” 1970-01-01 00:00:05 [Notice] 0x000005280000-0x0000052c0000 : “flagback” 1970-01-01 00:00:05 [Notice] 0x0000052c0000-0x000005cc0000 : “config” 1970-01-01 00:00:05 [Notice] 0x000005cc0000-0x00000dda0000 : “data” 1970-01-01 00:00:05 [Notice] 0x00000dda0000-0x00000e1a0000 : “oopsfs” 1970-01-01 00:00:05 [Notice] 0x00000e1a0000-0x00000eba0000 : “log” 1970-01-01 00:00:05 [Notice] 0x0000000c0000-0x000002940000 : “nsb_master” 1970-01-01 00:00:05 [Notice] 0x000002940000-0x0000051c0000 : “nsb_slave” 1970-01-01 00:00:05 [Notice] 0x000000000000-0x00000eba0000 : “all_flash” 1970-01-01 00:00:05 [Informational] libphy: Fixed MDIO Bus: probed 1970-01-01 00:00:05 [Informational] PPP generic driver version 2.4.5 1970-01-01 00:00:05 [Informational] PPP BSD Compression module registered 1970-01-01 00:00:05 [Informational] PPP Deflate Compression module registered 1970-01-01 00:00:05 [Informational] PPP MPPE Compression module registered 1970-01-01 00:00:05 [Informational] NET: Registered protocol family 24 1970-01-01 00:00:05 [Informational] xhci-hcd 1fab0000.xhci: xHCI Host Controller 1970-01-01 00:00:05 [Informational] xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 1970-01-01 00:00:05 [Informational] xhci-hcd 1fab0000.xhci: irq 132, io mem 0x1fab0000 1970-01-01 00:00:05 [Informational] hub 1-0:1.0: USB hub found 1970-01-01 00:00:05 [Informational] hub 1-0:1.0: 2 ports detected 1970-01-01 00:00:05 [Informational] xhci-hcd 1fab0000.xhci: xHCI Host Controller 1970-01-01 00:00:05 [Informational] xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 1970-01-01 00:00:05 [Informational] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 1970-01-01 00:00:05 [Informational] hub 2-0:1.0: USB hub found 1970-01-01 00:00:05 [Informational] hub 2-0:1.0: 1 port detected 1970-01-01 00:00:05 [Informational] usbcore: registered new interface driver cdc_acm 1970-01-01 00:00:05 [Informational] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 1970-01-01 00:00:05 [Informational] usbcore: registered new interface driver usbserial_generic 1970-01-01 00:00:05 [Informational] usbserial: USB Serial support registered for generic 1970-01-01 00:00:05 [Informational] usbcore: registered new interfa11119111111911971191111119111111911111197111970-111911191111111111111111970-01-01 00:00:05 [Notice] ubi1: default fastmap pool size: 8 1970-01-01 00:00:05 [Notice] ubi1: default fastmap WL pool size: 4 1970-01-01 00:00:05 [Notice] ubi1: attaching mtd10 1970-01-01 00:00:05 [Notice] ubi1: scanning is finished 1970-01-01 00:00:05 [Notice] ubi1: attached mtd10 (name “config”, size 10 MiB) 1970-01-01 00:00:05 [Notice] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 197ubi3: default fastmap pool size: 50 ubi3: default fastmap WL pool size: 25 ubi3: attaching mtd11 0-01-01 00:00:05 [Notice] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 1970-01-01 00:00:05 [Notice] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 1970-01-01 00:00:05 [Notice] ubi1: good PEBs: 80UBI device number 1, total 80 LEBs (10158080 bytes, 9.7 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) 1970-01-01 00:00:05 [Notice] ubi3: default fastmap pool size: 50 1970-01-01 00:00:05 [Notice] ubi3: default fastmap WL pool size: 25 1970-01-01 00:00:05 [Notice] ubi3: attaching mtd11 ubi3: scanning is finished 1970-01-01 00:00:0ubi3: attached mtd11 (name “data”, size 128 MiB) ubi3: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi3: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi3: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi3: good PEBs: 1031, bad PEBs: 0, corrupted PEBs: 0 ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi3: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 142210838 ubi3: available PEBs: 0, total reserved PEBs: 1031, PEBs reserved for bad PEB handling: 0 ubi3: background thread “ubi_bgt3d” started, PID 293 6 [Notice] ubi3: scanning is finished 1970-01-01 00:00:06 [Notice] ubi3: attached mtd11 (name “data”, size 128 MiB) 1970-01-01 00:00:06 [Notice] ubi3: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 1970-01-01 00:00:06 [Notice] ubi3: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 1970-01-01 00:00:06 [Notice] ubi3: VID header offset: 2048 (aligned 2048), data offset: 4096 1970-01-01 00:00:06 [Notice] ubi3: good PEBs: 1031, bad PEBs: 0, corrupted PEBs: 0 1970-01-01 00:00:06 [Notice] ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128 1970-01-01 00:00:06 [Notice] ubi3: max/mean erase cUBIFS (ubi1:0): Mounting in unauthenticated mode ounter: 2/0, WL threshold: 4096, image sequence number: 142210838 UBI deviceUBIFS (ubi1:0): background thread “ubifs_bgt1_0” started, PID 296 number 3, total 1031 LEBs (130912256 bytes, 124.8 MiB), available 0 LEBs (0 bUBIFS (ubi1:0): recovery needed ytes), LEB size 126976 bytes (124.0 KiB) 1970-01-01 00:00:06 [Notice] ubi3: available PEBs: 0, total reserved PEBs: 1031, PEBs reserved for bad PEB handling: 0 1970-01-01 00:00:06 [Notice] ubi3: background thread “ubi_bgt3d” started, PID 293 1970-01-01 00:00:06 [Notice] UBIFS (ubi1:0): Mounting in unauthenticated mode 1970-01-01 00:00:06 [Notice] UBIFS (ubi1:0): background thread “ubiUBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name “configs” UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 8126464 bytes (7 MiB, 64 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi1:0): reserved for root: 383832 bytes (374 KiB) UBIFS (ubi1:0): media format: w5/r0 (latest is w5/r0), UUID BC514AC4-2DA3-47CD-8582-17EA365EC4C6, small LPT model fs_bgt1_0” started, PID 296 1970-01-01 00:00:06 [Notice] UBIFS (ubi1:0): recovery needed 1970-01-01 00:00:06 [Notice] UBIFS (ubi1:0): recovery completed 1970-01-01 00:00:06 [Notice] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name “configs” 1970-01-UBIFS (ubi3:0): Mounting in unauthenticated mode 0UBIFS (ubi3:0): background thread “ubifs_bgt3_0” started, PID 303 1 00:00:06 [Notice] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 1970-01-01 00:00:06 [Notice] UBIFS (ubi1:0): FS size: 8126464 bytes (7 MiB, 64 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) 1970-01-01 00:00:06 [Notice] UBIFS (ubi1:0): reserved for root: 383832 UBIFS (ubi3:0): recovery needed bytes (374 KiB) 1970-01-01 00:00:06 [Notice] UBIFS (ubi1:0): media format: w5/r0 (latest is w5/r0), UUID BC514AC4-2DA3-47CD-8582-17EA365EC4C6, small LPT model 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): Mounting in unauthenticated mode 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): background thread “ubifs_bgt3_0” started, PID 303 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): recovery needed UBIFS (ubi3:0): recovery completed UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name “data” UBIFS (ubi3:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi3:0): FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) UBIFS (ubi3:0): reserved for root: 0 bytes (0 KiB) UBIFS (ubi3:0): media format: w4/r0 (latest is w5/r0), UUID D77586CE-10E9-415D-A2E0-7C1BDD219966, small LPT model 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): recovery completed 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name “data” 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): reserved for root: 0 bytes (0 KiB) 1970-01-01 00:00:06 [Notice] UBIFS (ubi3:0): media format: w4/r0 (latest is w5/r0), UUID D77586CE-10E9-415D-A2E0-7C1BDD219966, small LPT model /usr/etc/buildinfo == /etc/buildinfo /usr/etc/buildinfo == /configs/buildinfo check build date done 432 db crc = 0x3327a5 db header.crc = 0x3327a5 crc verify OK from /configs/confignew_encryption.cfg count = 128 bosa checksum_new = 6ff3 bosa checksum_old = 6ff3 do bosa checksum ok 432 Files /configs/confignew_encryption.cfg and /logs/backup/configs/confignew_encryption.cfg differ db crc = 0x3327a5 db header.crc = 0x3327a5 crc verify OK from /configs/confignew_encryption.cfg tar: removing leading '/' from member names Kernel Logger init. prepare led.conf for tcledctrl.ko in sdk_moudles.sh No WiFi chip on board, need not call boot_wlan.sh module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint ecnt_register_cpu_interrupts TC3162 LED Manager 0.1 init

tcledctrl version: tcledctrl V1.1.0.0 (Mar 1 2025-23:03:50). find led.conf error led path:/tmp/led.conf tccicmd V1.1.0.0 (Mar 1 2025-23:03:54)

SIFMaster 0.1 init

Interface 0 is ON

Interface 1 is ON

Register sifm cmd insmod pon driver fail to get the data of the item: Pon.TxPowerEnable.Pin fail to get the data of the item: Pon.TxPowerEnable.Active Prepare Opt_Tx_power_ctrl tx_dis:15,0,1 txpd:4294967295,0,0

tune parmeter

insmod eth driver insmod en7572 driver eth (uninitialized): netif_napi_add() called with weight 128 insmod hsgmii_lan insmod hw_nat.ko done done done insmod bandwidth card XG040GMF 3TN01058AAAA use bosa en7572 *load en7572 bosa* bosa init done. Exec. Successful Exec. Successful Exec. Successful Exec. Successful Exec. Successful Exec. Successful Exec. Successful Exec. Successful Exec. Successful *reg=000030f0 value:0000ff00 *reg=000031f0 value:0000ff00 *reg=000032f0 value:0000ff00 *reg=000033f0 value:0000ff00 *reg=000034f0 value:0000ff00 *reg=000036f0 value:0000ff00 HBSC HB 1 an8811 start reset 8811 none AN7583DT 0 POTS number is 0, not start voice

@Voice starting@

@Voice inited@

check if dts of mdio-bus exist insmode mdio_arht.ko insmod 8811_bbu_api.ko an8811 end HB No WiFi chip on board, need not call boot_wlan_hal.sh Copied 1 bytes from address 0x00000000 in flash to /logs/crash_info insmod mtdoops ... reboot Reason: PowerDown ... rebootinfo_power begin! CM HB 192.168.1.1 brctl: bridge br0: File exists e0:3d:a6:9c:ad:a0 RTNETLINK answers: File exists LOGFILE=NBELb46ce58b /data/openjdk0.img mount jdk by flag success!!! There is 2 USB port no board, insmod USB drivers enable core dump ++++++++++++++++++delete osgi_admin+++++++++++++++++++++++++ cpu 0 cpu 1 crond log mode

start mdev for usb devices /usr/etc/init.d/rcS: line 220: /usr/etc/scripts/backup_restore.sh: not found Login: total modify create delete filename 4 4 0 0 sendtocli_event 12 12 0 0 confignew_encryption.cfg 5 5 0 0 WanGponIntfObject 6 6 0 0 LanEthIntfObject 11 11 0 0 partition_0_verinfo 9 9 0 0 partition_1_verinfo 4 4 0 0 udhcpd.conf 10 8 1 1 smb.conf 10 5 5 0 passwd+ 10 0 5 5 passwd- 18 9 9 0 shadow+ 18 0 9 9 shadow- 10 5 5 0 group+ 10 0 5 5 group- 10 5 5 0 gshadow+ 10 0 5 5 gshadow- ####process_msg_thread pid is 770 nonroot dir not exist! cannot open file /configs/spc/qos_dev_limit.conf. filePath:/tmp/autoponini/modedata.txt not exist filePath:/tmp/autoponini/modedata.txt not exist filePath:/tmp/autoponini/modedata.txt not exist filePath:/tmp/autoponini/modedata.txt not exist *reg=0000211c value:6a010101 *reg=0000221c value:6a010101 *reg=0000231c value:6a010101 *reg=0000241c value:6a010101 *reg=0000001c value:60166016 *reg=0000001c value:60166016 *reg=00000020 value:00160016 *reg=00000020 value:00160016 *reg=00000024 value:04160216 *reg=00000024 value:04160216 *reg=000000a4 value:00160016 *reg=000000a4 value:00160016 RTNETLINK answers: File exists

tttt:OMCIManagerAPI.cc:isInitializedMgr:370--- 0m:21s: 328ms

OMCI Config Data Begin ONU Type : HGU onu mode : 2 CUSTOMER ID : 1 omci working mode : 3 factory mode: 0 max lan num : 4 max wifi num: 0 max wifi id start: 4 check wifi state: no 1G port num: 3 FE port num: 0 OPID: HBSC needIopDisguise: 0 port 0 config by omci: 0 port 1 config by omci: 0 port 2 config by omci: 0 port 3 config by omci: 0 dscp to Pbit for untag Config By OMCI: no ntp time get by omci: yes support double tag rules: yes accept all uni services: yes config uni isolation: no config lpt: yes uni rate limit: no pon reg type: 1 china eqip info format: no omci pppoe auth: no omciV2 config: yes untag wan config: no uni port4 config: yes slid 2 cfgmgr visiable: no voip Pbit Map: no fiberhome ge/fe query: no oltHotSwitchAction: Reboot when switch olt OMCI Config Data End

 user_port    class       domain

    1          ETH         HGU-DOMAIN
    2          ETH         HGU-DOMAIN
    3          ETH         HGU-DOMAIN
    4          ETH         HGU-DOMAIN

phy0 id test success phy1 id test success phy2 id test success phy3 id test success BOSA module access OK! phy0 id test success phy1 id test success phy2 id test success phy3 id test success BOSA module access OK! InitPortStream() maxPort=4, enet=4,moca=0 InitPortStream:: ONU type is HGU Use CTC flow service hal_eth_configure_port_domain to be implemented for mtk.... hal_eth_cfg_port_forwarding_mode to be implemented for mtk.... hal_eth_configure_port_domain to be implemented for mtk.... hal_eth_cfg_port_forwarding_mode to be implemented for mtk.... hal_eth_configure_port_domain to be implemented for mtk.... hal_eth_cfg_port_forwarding_mode to be implemented for mtk.... hal_eth_configure_port_domain to be implemented for mtk.... hal_eth_cfg_port_forwarding_mode to be implemented for mtk.... [qos_itf_init_tsched]: call init tsched hal_itf_flow.c:hal_stream_get_mcast_vlan_action_id is not implemented for mtk. hal_itf_flow.c:hal_stream_get_mcast_vlan_action_id is not implemented for mtk. hal_itf_flow.c:hal_stream_get_mcast_vlan_action_id is not implemented for mtk. hal_itf_flow.c:hal_stream_get_mcast_vlan_action_id is not implemented for mtk. hal_itf_flow.c:hal_stream_get_mcast_vlan_action_id is not implemented for mtk. hal_itf_flow.c:hal_stream_create_mcast_ethflow is not implemented for mtk.

tttt:OMCIManagerAPI.cc:isInitializedMgr:447--- 0m:21s: 403ms

RTNETLINK answers: File exists configFilePathDynamic: /configs/omci/ALUOmciLib.cfg configFilePathStatic: /bin/ALUOmciLib.cfg capFilePathDynamic: /configs/omci/ALUONTCapability.cfg capFilePathStatic: /bin/ALUONTCapability.cfg pid_fd 3 pid==1426

getSwVersionInfo(),imageBank:0,version:NXG1426V07At01

sal_wan_netModelInit:L1450 [DEBUG]: to be implemented for brcm

getSwVersionInfo(),imageBank:1,version:

OMCI_LIB: OmciMain:: Calling getSwImageInfo()swdl_get_image_status: cur image = 0 swdl_get_image_status: image 0 isvalid = 1 swdl_get_image_status: cur image = 0 swdl_get_image_status: image 1 isvalid = 1 killall: vtysh: no process killed cannot open file /logs/cfgstat_oid_info. Content-type: text/html;charset=UTF-8 Cache-Control: private,max-age=0; /sbin/wkick.cgi Location: / X-XSS-Protection: 1; mode=block

getSwVersionInfo(),imageBank:0,version:NXG1426V07At01

msgId=3

arpwan: ARP/NDP detect demo is Running ... nd detect NumberOfEntries:0 GM:hal_igmp_set_uni_port_type uniport 1 type 1GM:hal_igmp_set_uni_port_type uniport 2 type 1GM:hal_igmp_set_uni_port_type uniport 3 type 1GM:hal_igmp_set_uni_port_type uniport 4 type 1hal_igmp_set_enable_mcast_vlan_translation enable=1 add a new ndp config:WANConnection:,Interval:60,NumberOfRepetitions:3,Enable:0 Line 2404 get_options � (null)

getSwVersionInfo(),imageBank:1,version:

ploam.cc:read_sn_from_RI is implemented for mtk,sn:NBELFFFFFFB46CFFFFFFE5FFFFFF8B [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=0 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=1 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=2 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=3 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=4 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=5 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=6 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=7 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=8 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=9 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=10 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=11 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=12 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=13 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=14 [qos_itf_get_tsched_info]: get tsched info, g_tschedNum=15 [Jan 01 08:00:22] radvd (1529): version 2.17 started cannot open file /tmp/lanpd.conf.

isXXSA = 0

arpwan: wanDetectTask loop is Running ... ds_sec=-1 Inside GatewayUniSupp_1Itf::GatewayUniSupp_1Itf constructor Value of bit position is 5 spc:CM spc: Going to boot spccm Exec. Successful Exec. Successful spc: The SPC exec path is /sbin/spccm spc: finish booting ubusd & spccm Value of bit position is 0 [PwrShedding] dataPwrTime <0>,cesPwrTime <0>,voicePwrTime <0>,videoPwrTime <0>,restoreTime <0>

setIANAPortId(VeipId=3585,IANAAssignportId=0

create auto instanmce gateway uni ME succesful [Tr069MgmtServer]: Create one instance of Tr069MgmtServer! create auto instanmce gateway uni ME succesful configUniDot1xParams(portId=101) unsupported port create auto instanmce gateway uni ME succesful configUniDot1xParams(portId=102) unsupported port create auto instanmce gateway uni ME succesful configUniDot1xParams(portId=103) unsupported port configUniDot1xParams(portId=104) unsupported port Value of bit position is 145 Value of bit position is 186 finish EnhancedSecurityControlf create OMCI_LIB:ALL PQs (US+DS) created method = HW_NAT_TAB_CLEAN done

tttt:OmciMain.cc:main:3688--- 0m:22s: 898ms

method = HW_NAT_TAB_CLEAN done swdl_get_image_status: cur image = 0 swdl_get_image_status: image 0 isvalid = 1 swdl_get_image_status: cur image = 0 swdl_get_image_status: image 1 isvalid = 1

getSwVersionInfo(),imageBank:0,version:NXG1426V07At01

dnsproxy pid 1514

getSwVersionInfo(),imageBank:1,version:

OMCI_LIB: Got swImageInfo = b, standby = 1 postParserInitialized ploam.cc:read_sn_from_RI is implemented for mtk,sn:NBELFFFFFFB46CFFFFFFE5FFFFFF8B sal_ponMacOpt.cc:SAL_startPloam is implemented for mtk,sn:NBELB46CE58B iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. call empty_func macFilter.cpp:sal_setPolicy iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. csMsgFd:3 iptables: No chain/target/match by that name. Password for 'user' changed ip6tables: No chain/target/match by that name. iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). iptables: No chain/target/match by that name. Password for 'user' changed ip6tables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. Password for 'user-telnet' changed Password for 'root' changed smart customer name: CM smart: boot pcmcm! phy0 id test success phy1 id test success phy2 id test success phy3 id test success BOSA module access OK! smart: finish booting new service system! iptables v1.4.21: Couldn't find target `FWK_APP_PRE'

Try `iptables -h' or 'iptables --help' for more information. sh: /sbin/CuInformLoader: not found Get in plugin_check sh: /sbin/qrdiagnosis: not found crond log mode

CM HB andlink HB Get in plugin_install /data/plugins/plugin-b/com.chinamobile.smartgateway.andlink .com.chinamobile.smartgateway.andlink appcore HB Get in plugin_install /data/plugins/plugin-b/com.chinamobile.smartgateway.appcore .com.chinamobile.smartgateway.appcore cmccdpi HB Get in plugin_install /data/plugins/plugin-b/com.chinamobile.smartgateway.cmccdpi .com.chinamobile.smartgateway.cmccdpi wuyougateway HB speedtest HB provider HB ekit HB security setting finished osgi_admin drwxrwxrwx 2 root root 160 Jan 1 08:00 . -rwxr-xr-x 1 root root 2154 May 24 2024 /etc/scripts/osgi_admin.sh crw-rw-rw- 1 root root 1, 3 Jan 1 08:00 /dev/null Delete all traffic mirror rules before booting java! conntrack v1.0.0 (conntrack-tools): connection tracking table has been emptied. Command failed: Not found Delete all traffic forward rules before booting java! method = HW_NAT_TAB_CLEAN done Command failed: Not found Delete all traffic http process rules before booting java! Command failed: Not found memory--→>>512m *start JVM done* iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). xl2tpd6[2531]: Not looking for kernel SAref support. xl2tpd6[2531]: Using l2tp kernel support. xl2tpd6[2531]: xl2tpd version xl2tpd-1.3.17 started on HBSC-XG040GMF-NBELB46CE58B PID:2531 xl2tpd6[2531]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd6[2531]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd6[2531]: Inherited by Jeff McAdams, (C) 2002 xl2tpd6[2531]: Forked again by Xelerance (www.xelerance.com) (C) 2006-2016 xl2tpd6[2531]: And again, forked by ulysse31 a.k.a Nix (ulysse31'at'gmail.com) (C) 2022 xl2tpd6[2531]: To convert source to IPv6, and create binary/daemon/service xl2tpd6 xl2tpd6[2531]: Listening on IP address ::, port 1701 xl2tpd[2529]: setsockopt recvref[30]: Protocol not available xl2tpd[2529]: Using l2tp kernel support. xl2tpd[2529]: xl2tpd version xl2tpd-1.3.6 started on HBSC-XG040GMF-NBELB46CE58B PID:2529 xl2tpd[2529]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[2529]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[2529]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[2529]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[2529]: Listening on IP address 0.0.0.0, port 1701 chmod: /tmp/qi_plug_msgq: No such file or directory #!!#ignoreAutoStartFlag false JNI onload * [write]failed to open /tmp/comcli.conf! [write]failed to open /tmp/comcli.conf! Login: adExec. Successful Exec. Successful

Password: Error! Login: admin Password: Error! Login: *imp_bundle_pluginattr done* *imp_bundle_getstatus done* *imp_bundle_pluginattr done* *imp_bundle_getstatus done* *imp_bundle_pluginattr done* *imp_bundle_getstatus done*

mask* task:tcwdog:0x7 type=task name=tcwdog mask=0x7 pid 725's current affinity mask: 3 pid 725's new affinity mask: 3 taskset tcwdog = 0x7 ok task:smbd:0x8 type=task name=smbd mask=0x8 can't find name smbd task:omciMgr:0xf type=task name=omciMgr mask=0xf pid 1355's current affinity mask: 3 pid 1355's new affinity mask: 3 taskset omciMgr = 0xf ok #IRQ* CPU* mask #irq:100:0x4 type=#irq name=100 mask=0x4 #irq:112:0x8 type=#irq name=112 mask=0x8 ##100:ra0/rai0:CPU2 type=##100 name=ra0/rai0 mask=CPU2 **##112:lan3:CPU3 type=##112 name=lan3 mask=CPU3 Login:

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING