NETGEAR Stora

<nowiki>

U-Boot 2020.04 (Jul 10 2020 - 12:45:47 +0000) Netgear Stora MS2110

SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB NAND: 256 MiB Loading Environment from NAND... OK In: serial Out: serial Err: serial Net: egiga0 PHY reset timed out 88E1116 Initialized on egiga0 IDE: ide_preinit failed Hit any key to stop autoboot: 0 ubi0: attaching mtd3 ubi0: scanning is finished ubi0: attached mtd3 (name “ubi”, size 255 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 ubi0: VID header offset: 512 (aligned 512), data offset: 2048 ubi0: good PEBs: 2030, bad PEBs: 10, corrupted PEBs: 0 ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1356578471 ubi0: available PEBs: 0, total reserved PEBs: 2030, PEBs reserved for bad PEB handling: 30 UBIFS error (ubi0:1 pid 0): ubifs_read_node: bad node type (4 but expected 6) UBIFS error (ubi0:1 pid 0): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Not a node, first 24 bytes:Error reading superblock on volume 'ubi:rootfs' errno=-22! ubifsmount - mount UBIFS volume

Usage: ubifsmount <volume-name>

1. mount 'volume-name' volume

No size specified → Using max size (2451456) Read 2451456 bytes from volume kernel to 00800000 ## Booting kernel from Legacy Image at 00800000 ...

 Image Name:   ARM OpenWrt Linux-5.4.48
 Created:      2020-07-10  12:45:47 UTC
 Image Type:   ARM Linux Kernel Image (uncompressed)
 Data Size:    2405839 Bytes = 2.3 MiB
 Load Address: 00008000
 Entry Point:  00008000
 Verifying Checksum ... OK
 Loading Kernel Image

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.48 (wigyori@trabant) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13674+1-cbb66f9edb)) #0 Fri Jul 10 12:45:47 2020 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: NETGEAR MS2000 / MS2110 aka Stora [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),-@0x100000(ubi) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 121140K/131072K available (4839K kernel code, 166K rwdata, 1340K rodata, 1024K init, 202K bss, 9932K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x2d4/0x4f8 with crng_init=0 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000043] Switching to timer-based delay loop, resolution 5ns [ 0.000130] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000154] pid_max: default: 32768 minimum: 301 [ 0.000397] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000424] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001497] CPU: Testing write buffer coherency: ok [ 0.002535] Setting up static identity map for 0x100000 - 0x10003c [ 0.002837] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.007000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.007035] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.007203] pinctrl core: initialized pinctrl subsystem [ 0.008401] NET: Registered protocol family 16 [ 0.009028] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.010332] cpuidle: using governor ladder [ 0.010746] Feroceon L2: Enabling L2 [ 0.010798] Feroceon L2: Cache support initialised. [ 0.015437] No ATAGs? [ 0.036921] SCSI subsystem initialized [ 0.037929] usbcore: registered new interface driver usbfs [ 0.038000] usbcore: registered new interface driver hub [ 0.038062] usbcore: registered new device driver usb [ 0.041032] clocksource: Switched to clocksource orion_clocksource [ 0.041808] thermal_sys: Registered thermal governor 'step_wise' [ 0.042071] NET: Registered protocol family 2 [ 0.042686] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.042723] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.042746] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.042767] TCP: Hash tables configured (established 1024 bind 1024) [ 0.042864] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.042890] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.043101] NET: Registered protocol family 1 [ 0.043135] PCI: CLS 0 bytes, default 32 [ 0.046134] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.052665] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.052679] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.064497] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 0.065551] mvebu-gpio f1010140.gpio: IRQ index 3 not found [ 0.066000] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 0.066020] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.066033] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 0.066044] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 0.066152] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 0.066188] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 0.067496] PCI: bus0: Fast back to back transfers disabled [ 0.067514] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.068740] PCI: bus1: Fast back to back transfers enabled [ 0.068759] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.068982] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref] [ 0.068998] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.069492] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.070190] printk: console [ttyS0] disabled [ 0.070281] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 0.526936] printk: console [ttyS0] enabled [ 0.532272] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda [ 0.538661] nand: Samsung NAND 256MiB 3,3V 8-bit [ 0.543336] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.550952] Scanning device for bad blocks [ 0.597814] Bad eraseblock 400 at 0x000003200000 [ 0.602515] Bad eraseblock 401 at 0x000003220000 [ 0.607200] Bad eraseblock 402 at 0x000003240000 [ 0.622141] Bad eraseblock 499 at 0x000003e60000 [ 0.628109] Bad eraseblock 512 at 0x000004000000 [ 0.632809] Bad eraseblock 513 at 0x000004020000 [ 0.646349] Bad eraseblock 597 at 0x000004aa0000 [ 0.696537] Bad eraseblock 1024 at 0x000008000000 [ 0.710816] Bad eraseblock 1114 at 0x000008b40000 [ 0.746447] Bad eraseblock 1404 at 0x00000af80000 [ 0.819833] 3 cmdlinepart partitions found on MTD device orion_nand [ 0.826139] Creating 3 MTD partitions on “orion_nand”: [ 0.831315] 0x000000000000-0x0000000e0000 : “uboot” [ 0.836942] 0x0000000e0000-0x000000100000 : “uboot_env” [ 0.842873] 0x000000100000-0x000010000000 : “ubi” [ 0.849605] libphy: Fixed MDIO Bus: probed [ 0.854070] libphy: orion_mdio_bus: probed [ 0.858207] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@0: Whitelisted compatible string. Please remove [ 0.872884] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 0.881674] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address e0:46:9a:83:b6:fb [ 1.921044] rtc-mv f1010300.rtc: internal RTC not ticking [ 1.926572] i2c /dev entries driver [ 1.931331] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ 1.940156] watchdog: f1020300.watchdog-timer: falling back to default timeout (21) [ 1.948036] orion_wdt: Initial timeout 21 sec [ 1.958326] marvell-cesa f1030000.crypto: CESA device successfully registered [ 1.966495] NET: Registered protocol family 10 [ 1.972880] Segment Routing with IPv6 [ 1.976650] NET: Registered protocol family 17 [ 1.981336] 8021q: 802.1Q VLAN Support v1.8 [ 1.988988] UBI: auto-attach mtd2 [ 1.992378] ubi0: attaching mtd2 [ 2.366797] ubi0: scanning is finished [ 2.384123] ubi0: attached mtd2 (name “ubi”, size 255 MiB) [ 2.389640] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes [ 2.396584] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 2.403333] ubi0: VID header offset: 512 (aligned 512), data offset: 2048 [ 2.410148] ubi0: good PEBs: 2030, bad PEBs: 10, corrupted PEBs: 0 [ 2.416372] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 2.423644] ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1356578471 [ 2.432834] ubi0: available PEBs: 0, total reserved PEBs: 2030, PEBs reserved for bad PEB handling: 30 [ 2.442966] block ubiblock0_1: created from ubi0:1(rootfs) [ 2.448482] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem [ 2.455508] hctosys: unable to open rtc device (rtc0) [ 2.460977] ubi0: background thread “ubi_bgt0d” started, PID 435 [ 2.472708] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.483414] Freeing unused kernel memory: 1024K [ 2.488111] Run /sbin/init as init process [ 2.492248] random: fast init done [ 2.867116] init: Console is alive [ 2.870704] init: - watchdog - [ 4.367786] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.436220] raid6: using algorithm int32x8 gen() 0 MB/s [ 4.441527] raid6: .... xor() 0 MB/s, rmw enabled [ 4.446249] raid6: using intx1 recovery algorithm [ 4.457225] xor: measuring software checksum speed [ 4.561036] arm4regs : 904.000 MB/sec [ 4.661038] 8regs : 670.800 MB/sec [ 4.761035] 32regs : 830.800 MB/sec [ 4.765236] xor: using function: arm4regs (904.000 MB/sec) [ 4.971911] Btrfs loaded, crc32c=crc32c-generic [ 4.981015] exfat: module is from the staging directory, the quality is unknown, you have been warned. [ 4.992130] exFAT: Version 1.3.0 [ 5.116949] SGI XFS with security attributes, no debug enabled [ 5.132424] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.141920] ehci-fsl: Freescale EHCI Host controller driver [ 5.150151] ehci-orion: EHCI orion driver [ 5.154429] orion-ehci f1050000.ehci: EHCI Host Controller [ 5.159984] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 5.167850] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 5.201067] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 5.207773] hub 1-0:1.0: USB hub found [ 5.211791] hub 1-0:1.0: 1 port detected [ 5.218880] ehci-platform: EHCI generic platform driver [ 5.230888] sata_mv f1080000.sata: slots 32 ports 2 [ 5.239768] scsi host0: sata_mv [ 5.243788] scsi host1: sata_mv [ 5.247153] ata1: SATA max UDMA/133 irq 33 [ 5.251303] ata2: SATA max UDMA/133 irq 33 [ 5.582384] ata1: SATA link down (SStatus 0 SControl F300) [ 5.912373] ata2: SATA link down (SStatus 0 SControl F300) [ 5.920802] usbcore: registered new interface driver usb-storage [ 5.930067] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.947713] init: - preinit - [ 6.814002] random: jshn: uninitialized urandom read (4 bytes read) [ 6.904824] random: jshn: uninitialized urandom read (4 bytes read) [ 6.935271] random: jshn: uninitialized urandom read (4 bytes read) [ 7.014743] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 7.024671] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 10.192465] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 10.202404] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.135571] Starting lvm2 during preinit File descriptor 3 (/dev/watchdog) leaked on lvm invocation. Parent PID 534: /bin/sh [ 12.022825] urandom_read: 2 callbacks suppressed [ 12.022832] random: lvm: uninitialized urandom read (4 bytes read) [ 12.131552] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com File descriptor 3 (/dev/watchdog[ 12.171287] random: procd: uninitialized urandom read (4 bytes read) ) leaked on lvm invocation. Parent PID 534: /bin/sh [ 12.185159] random: lvm: uninitialized urandom read (4 bytes read) [ 12.355511] mount_root: loading kmods from internal overlay [ 12.382002] kmodloader: loading kernel modules from etc/modules-boot.d/* [ 12.392729] kmodloader: done loading kernel modules from etc/modules-boot.d/* [ 12.546479] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 12.578749] UBIFS (ubi0:2): background thread “ubifs_bgt0_2” started, PID 613 [ 12.612949] UBIFS (ubi0:2): recovery needed [ 12.777136] UBIFS (ubi0:2): recovery completed [ 12.781728] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name “rootfs_data” [ 12.789593] UBIFS (ubi0:2): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 12.799575] UBIFS (ubi0:2): FS size: 231081984 bytes (220 MiB, 1791 LEBs), journal size 11612160 bytes (11 MiB, 90 LEBs) [ 12.810508] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB) [ 12.817172] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 32987073-885F-4BA6-A700-A8C55C95B57C, small LPT model [ 12.830882] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 12.840404] block: extroot: not configured [ 12.844699] UBIFS (ubi0:2): un-mount UBI device 0 [ 12.849445] UBIFS (ubi0:2): background thread “ubifs_bgt0_2” stops [ 12.860338] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 12.892886] UBIFS (ubi0:2): background thread “ubifs_bgt0_2” started, PID 616 [ 12.971592] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name “rootfs_data” [ 12.979463] UBIFS (ubi0:2): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 12.989447] UBIFS (ubi0:2): FS size: 231081984 bytes (220 MiB, 1791 LEBs), journal size 11612160 bytes (11 MiB, 90 LEBs) [ 13.000377] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB) [ 13.007035] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 32987073-885F-4BA6-A700-A8C55C95B57C, small LPT model [ 13.124729] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 13.134050] block: extroot: not configured [ 13.139516] mount_root: switching to ubifs overlay [ 13.165227] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off. [ 13.177611] urandom-seed: Seeding with /etc/urandom.seed Scanning for Btrfs filesystems [ 13.985790] procd: - early - [ 13.988769] procd: - watchdog - [ 14.624819] procd: - watchdog - [ 14.628216] procd: - ubus - [ 14.684134] random: ubusd: uninitialized urandom read (4 bytes read) [ 14.711013] random: ubusd: uninitialized urandom read (4 bytes read) [ 14.721306] procd: - init - Please press Enter to activate this console. [ 15.381779] kmodloader: loading kernel modules from /etc/modules.d/* [ 15.572384] Key type dns_resolver registered [ 15.621722] Key type cifs.idmap registered [ 15.701425] RPC: Registered named UNIX socket transport module. [ 15.707379] RPC: Registered udp transport module. [ 15.712137] RPC: Registered tcp transport module. [ 15.716858] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.758095] urngd: v1.0.2 started. [ 15.825238] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.873175] NFS: Registering the id_resolver key type [ 15.878282] Key type id_resolver registered [ 15.882516] Key type id_legacy registered [ 15.966555] fuse: init (API version 7.31) [ 16.024747] rtc rtc0: invalid alarm value: 2020-07-10T16:71:00 [ 16.030771] rtc-pcf8563 0-0051: registered as rtc0 [ 16.039759] random: crng init done [ 16.256635] xt_time: kernel timezone is -0000 [ 16.275578] lm75 0-0048: hwmon1: sensor 'lm75' [ 16.344034] PPP generic driver version 2.4.2 [ 16.362339] NET: Registered protocol family 24 [ 16.406348] kmodloader: done loading kernel modules from /etc/modules.d/* [ 24.406766] br-lan: port 1(eth0) entered blocking state [ 24.412071] br-lan: port 1(eth0) entered disabled state [ 24.417596] device eth0 entered promiscuous mode [ 27.055792] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 27.065781] br-lan: port 1(eth0) entered blocking state [ 27.071071] br-lan: port 1(eth0) entered forwarding state [ 27.079269] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

BusyBox v1.31.1 () built-in shell (ash)

_______                     ________        __

| |.-----.-----.-----.| | | |.----.| |_ | - || _ | -| || | | || _|| _| |_|| |_||||||| ||

        |__| W I R E L E S S   F R E E D O M

----------------------------------------------------- OpenWrt SNAPSHOT, r13674+1-cbb66f9edb

WARNING!

There is no root password defined on this device! Use the “passwd” command to set up a new password in order to prevent unauthorized SSH logins.

root@OpenWrt:/#