Show pagesourceOld revisionsBacklinksBack to top × Table of Contents Redboot help fis list fconfig -l processor pciscan Redboot help RedBoot> help Downloads and boots the primary image from flash. If partition name is specified image from that partition will be booted. If -n option is used network iinterface is stopped before booting Boot [-n] [-p ] Initializes the flash and creates default Redboot and Appl Image partitions. FlashInit Displays status of application images in flash. DispImageStatus Downloads the application image from TFTP server, validates it and fuses it in Flash. If Flash paritition name is given then image will be fused in that parition, otherwise the image is fused in appropriate partition having the secondary image. FuseImage [-p ] [-h ] Erases the image in the given flash partiton. EraseImage Sets the MAC address in to the bootloader configuration in flash. SetMacAddr [ -p ] Manage aliases kept in FLASH memory alias name [value] Set/Query the system console baud rate baudrate [-b ] Check broadcom 53xx bcmtest Manage machine caches cache [ON | OFF] Display/switch console channel channel [-1|] Compute a 32bit checksum [POSIX algorithm] for a range of memory cksum -b -l Display (hex dump) a range of memory dump -b [-l ] [-s] [-1|2|4] Execute an image - with MMU off exec [-w timeout] [-b [-l ]] [-r [-s ]] [-c "kernel command line"] [] Manage FLASH images fis {cmds} Manage configuration kept in FLASH memory fconfig [-i] [-l] [-n] [-f] [-d] | [-d] nickname [value] Test the factory reset button on the FVX538 board polling the status of reset button around 5 seconds frtest Restart autonegotiation of Giga port giga Execute code at a location go [-w ] [-n] [entry] Help about help? help [] Set/change IP addresses ip_address [-l ] [-h ] Test LEDs on the FVX538 board LED number 0: LAN port DMZ LED 1: RTL8110S Internet connection LED 2: AC101L Internet connection LED 3: System test LED A comprehensive test is performed if no parameter is specified ledtest [-g ] Load a file load [-r] [-v] [-h ] [-m ] [-c ] [-b ] Compare two blocks of memory mcmp -s -d -l [-1|-2|-4] Copy memory mcopy -s -d -l [-1|-2|-4] Set/Fill memory location(s) mem [-b ] [-l ] [-1|2|4] [-w] Apply data bus test, address bus test, and device test on RAM memtest Fill a block of memory with a pattern mfill -b -l -p [-1|-2|-4] Scans PCI devices and reports findings pciscan Converts a virtual to a physical address physaddr Network connectivity test ping [-v] [-n ] [-l ] [-t ] [-r ] [-i ] -h Print information about the current settings within the main processor processor Reset the system reset Show register status related with giga port showgiga Display RedBoot version information version Converts a physical to a virtual address virtaddr Display (hex dump) a range of memory x -b [-l ] [-s] [-1|2|4] fis list RedBoot> fis list Name FLASH addr Mem addr Length Entry point RedBoot 0x50000000 0x50000000 0x00040000 0x00000000 RedBoot config 0x50FC0000 0x50FC0000 0x00001000 0x00000000 FIS directory 0x50FE0000 0x50FE0000 0x00020000 0x00000000 appimg1 0x50040000 0x50040000 0x00780000 0x00000000 appimg2 0x507C0000 0x507C0000 0x00780000 0x00000000 igwpri 0x50F40000 0x50F40000 0x00080000 0x00000000 fconfig -l RedBoot> fconfig -l Run script at boot: true Boot script: .. boot Boot script timeout (1000ms resolution): 1 Use BOOTP for network configuration: false Gateway IP address: 0.0.0.0 Local IP address: 192.168.16.244 Local IP address mask: 255.255.255.0 Product Info: FVX538 Default server IP address: 192.168.16.1 Version Info: 1.0a Console baud rate: 115200 DNS server IP address: 0.0.0.0 GDB connection port: 9000 Force console for special debug messages: false Network debug at boot time: false Default network device: npe_eth0 Network hardware address [MAC] for NPE eth0: 0x00:0x14:0x6C:0xCB:0xXX:0xXX Network hardware address [MAC] for NPE eth1: 0x00:0x14:0x6C:0xCB:0xXX:0xXX Network hardware address [MAC] for RTL 8169: 0x00:0x14:0x6C:0xCB:0xXX:0xXX processor RedBoot> processor Processor: Intel StrongARM V5TE XScale Core Rev: 0 IXP4XX 533MHz B0 step ID = 690541C1 (ex. IXP4XX A0 step = 690541C0) BIG-ENDIAN operation Branch Target Buffer ENABLED Instruction Cache ENABLED Data Cache ENABLED MMU ENABLED Mini-Cache = Write back, Read Allocate Write Buffer Coalescing ENABLED pciscan RedBoot> pciscan ========== Scanning initialized devices Found device on bus 0, devfn 0x00: Note that board is active. Probed sizes and CPU addresses invalid! Vendor 0x8086 Device 0x8500 Command 0x0006, Status 0x02a0 Class/Rev 0x0b400001 Header 0x00 SubVendor 0x0000, Sub ID 0x0000 BAR[0] 0x00000008 / probed size 0x00000000 / CPU addr 0x00000000 BAR[1] 0x01000008 / probed size 0x00000000 / CPU addr 0x01000000 BAR[2] 0x02000008 / probed size 0x00000000 / CPU addr 0x02000000 BAR[3] 0x03000008 / probed size 0x00000000 / CPU addr 0x03000000 BAR[4] 0x80000008 / probed size 0x00000000 / CPU addr 0x80000000 BAR[5] 0x90000001 / probed size 0x00000000 / CPU addr 0x90000000 Wired to HAL vector 7 Found device on bus 0, devfn 0x38: Note that board is active. Probed sizes and CPU addresses invalid! Vendor 0x10ec Device 0x8169 Command 0x0147, Status 0x02b0 Class/Rev 0x02000010 Header 0x00 SubVendor 0x10ec, Sub ID 0x8169 BAR[0] 0x00001801 / probed size 0x00000000 / CPU addr 0x00001800 BAR[1] 0x48020000 / probed size 0x00000000 / CPU addr 0x48020000 BAR[2] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff Wired to HAL vector 7 Found device on bus 0, devfn 0xa8: Note that board is active. Probed sizes and CPU addresses invalid! Vendor 0x177d Device 0x0003 Command 0x0145, Status 0x02b0 Class/Rev 0x10000000 Header 0x00 SubVendor 0x177d, Sub ID 0x0001 BAR[0] 0x00001001 / probed size 0x00000000 / CPU addr 0x00001000 BAR[1] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff BAR[2] 0x00001401 / probed size 0x00000000 / CPU addr 0xffffffff BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff Wired to HAL vector 7 This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.OKMore information about cookies Last modified: 2010/10/04 16:11by jow