User Tools

Site Tools


toh:engenius:ecb3500

EnGenius ECB3500

Install Openwrt-BackFire as 3Com 3CRWER100-75 linked bellow. Redboot is accesible for 2 seconds @ 192.168.1.1:9000 from when the lan led goes steady. wan led does not function after flash.

3crwer100_75

after do a good 30 second reset.

+Ethernet eth0: MAC address 00:02:6f:61:7d:38
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version 1.1 - built 17:12:07, Apr 17 2009

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Obtaining a redboot prompt via serial:

Board: ap51
RAM: 0x80000000-0x82000000, [0x80040f30-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
^C
RedBoot>

Flash layout

RedBoot> fis list
Name              FLASH addr  Mem addr    Length      Entry point
RedBoot           0xA8000000  0x80041000  0x00030000  0x80041000
rootfs            0xA8030000  0xA8030000  0x003F0000  0x00000000
vmlinux.bin.l7    0xA8420000  0x80041000  0x000A0000  0x80041798
cfg               0xA84C0000  0xA84C0000  0x00020000  0x00000000
FIS directory     0xA87E0000  0xA87E0000  0x0000F000  0x00000000
RedBoot config    0xA87EF000  0xA87EF000  0x00001000  0x00000000

Bootlogs

Taken from the 5v serial header on the EnGenius ebc3500 via screen /dev/ttyUSB0:

+Ethernet eth0: MAC address 00:02:6f:61:7d:38 IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0 Default server: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version 1.1 - built 17:12:07, Apr 17 2009 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Board: ap51 RAM: 0x80000000-0x82000000, [0x80040f30-0x80fe1000] available FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each. == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> fis load -l vmlinux.bin.l7 Image loaded from 0x80041000-0x801c2000 RedBoot> go <4>CPU revision is: 00019064 <4>Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. <4>Primary data cache 16kB 4-way, linesize 16 bytes. <4>Linux version 2.4.25-LSDK-5.3.1.46 (root@localhost.localdomain) (gcc version 3.3.3) #1 Fri Apr 17 17:29:03 CST 2009 <4>Determined physical RAM map: <4> memory: 02000000 @ 00000000 (usable) <4>On node 0 totalpages: 8192 <4>zone(0): 8192 pages. <4>zone(1): 0 pages. <4>zone(2): 0 pages. <4>Kernel command line: console=ttyS0,9600 <4>Using 92.000 MHz high precision timer. <4>Calibrating delay loop... 183.50 BogoMIPS <6>Memory: 30436k/32768k available (1354k kernel code, 2332k reserved, 88k data, 76k init, 0k highmem) <6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) <6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) <4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes) <4>Checking for 'wait' instruction... unavailable. <4>POSIX conformance testing by UNIFIX <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <4>Starting kswapd <5>JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with no serial options enabled <6>ttyS00 at 0xb1100003 (irq = 37) is a 16550A <6>Generic MIPS RTC Driver v1.0 <6>PPP generic driver version 2.4.2 <6>PPP Deflate Compression module registered <6>PPP BSD Compression module registered <4>MTD driver for SPI flash. <4>spiflash: Probing for Serial flash ... <4>spiflash: Found SPI serial Flash. <4>8388608: size <5>Creating 7 MTD partitions on "spiflash": <5>0x00000000-0x00030000 : "RedBoot" <5>0x00030000-0x00420000 : "rootfs" <5>0x00420000-0x004c0000 : "vmlinux.bin.l7" <5>0x004c0000-0x004e0000 : "cfg" <5>0x004e0000-0x007e0000 : "unallocated space" <5>0x007e0000-0x007ef000 : "FIS directory" <4>mtd: partition "FIS directory" doesn't end on an erase block -- force read-only <5>0x007ef000-0x007f0000 : "RedBoot config" <4>mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only <4>spiflash_init: ROOTFS_NAME=rootfs, MTD_BLOCK_MAJOR=1f,i=1, ROOT_DEV=0 <6>Initializing Cryptographic API <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 512 buckets, 4Kbytes <6>TCP: Hash tables configured (established 2048 bind 4096) <4>ip_conntrack version 2.1 (256 buckets, 2048 max) - 304 bytes per conntrack <4>ip_tables: (C) 2000-2002 Netfilter core team <6>ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ <4>arp_tables: (C) 2002 David S. Miller <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>NET4: Ethernet Bridge 008 for NET4.0 <1>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> <1>All bugs added by David S. Miller <davem@redhat.com> <4>mount_root: ROOT_DEV=1f02, maj=31, min=2 <4>VFS: Mounted root (jffs2 filesystem) readonly. <4>mount_block_root: kdevname(ROOT_DEV)=1f:02,root_device_name=,ROOT_DEV=1f02 <6>Freeing unused kernel memory: 76k freed <4>Algorithmics/MIPS FPU Emulator v1.5 Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/ae531x.o Warning: loading<4>ae531x_MAC_setup: CONFIG_KENDIN_ENET_PHY ae531x will taint the kernel: non-GPL license - Atheros See http://www.tux.org/lkml/#export-<4> <4>Going to gpio_proc_entry tainted for information about tainted modules Using /lib/modules/2.4.25-LSDK-5.3.1.46/misc/ar531xgpio.o Warning: loading ar531xgpio will taint the kernel: non-GPL license - Atheros See ht<4>(eileen) FACTORY_RESET tp://www.tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules/2.4.25-LSDK-5.3.1.46/misc/ar531x-wdt.o Warning: loading ar531x-wdt will taint the kernel: non-GPL license - Atheros See http://www.tux.org/lkml/#export-tainted for information about tainted modules HAVE_SENDFILE HAVE_LINUX_SENDFILE mini_httpd: started as root without requesting chroot(), warning only Dec 31 19:00:10 /usr/sbin/cfg_mgr[43]: Initializing cfg structure... Dec 31 19:00:10 /usr/sbin/cfg_mgr[43]: Setting factory default... Dec 31 19:00:11 /usr/sbin/cfg_mgr[43]: Reading cfg configuration(/dev/mtdblock4)... Dec 31 19:00:11 /usr/sbin/cfg_mgr[43]: Reading cfg file (/dev/mtdblock4) Dec 31 19:00:11 /usr/sbin/cfg_mgr[43]: setting values... Dec 31 19:00:12 /usr/sbin/cfg_mgr[43]: [truncated] Unrecognized cmd: name=�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� Dec 31 19:00:12 /usr/sbin/cfg_mgr[43]: socket(0x3) t listening rc_action: app=wlan, action=create rc creating cfg for wlan rm: cannot remove `/tmp/wlan-cfg': No such file or directory rm: cannot remove `/tmp/stp-cfg': No such file or directory rm: cannot remove `/tmp/ssidprofile*': No such file or d<6>ath_hal: 0.9.17.1 (AR5212, AR5312, RF5111, RF5112, RF2413, RF5413, RF2316, TX_DESC_SWAP) irectory rm: cannot remove `/tmp/hostapd.conf.*': No such file or directory rc_action: app=wlan, action=start rc starting wlan Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/ath_hal.o Warning: loading ath_hal will taint the kernel: non-GPL license - Proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/wlan.o <6>wlan: 0.8.4.2 (Atheros/multi-bss) Using /lib/modules/2.4.25-LSDK-5<6>wlan: mac acl policy registered .3.1.46/net/wlan_acl.o Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/wlan_ccmp.o Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/wlan_tkip.o Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/wlan_wep.o Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/wlan_xauth.o Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/ath_dfs.o Warning: loadin<6>ath_dfs: Version 2.0.0 <4>Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved g ath_dfs will taint the kernel: non-GPL license - Proprietary See http://www<6>ath_rate_atheros: Version 2.0.1 <4>Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved .tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/ath_rate_atheros.o Warning: loading ath_rate_atheros will taint the kernel: non-GPL license - Proprietary See http://www.tux.org/lkml/#expo<6>ath_ahb: 0.9.4.5 (Atheros/multi-bss) <4>init_ahb: get board radio_config <4>(ar5312_bsp.c)boardConfig=0xa87f0000 rt-tainted for i<4>(bw) is_halfchan_cap=1 <4>(bw) is_quarterchan_cap=1 nformation about<4>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps <4>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps <4>wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps <4>wifi0: mac 11.0 phy 4.8 radio 7.0 <4>wifi0: Use hw queue 1 for WME_AC_BE traffic <4>wifi0: Use hw queue 0 for WME_AC_BK traffic <4>wifi0: Use hw queue 2 for WME_AC_VI traffic <4>wifi0: Use hw queue 3 for WME_AC_VO traffic <4>wifi0: Use hw queue 8 for CAB traffic <4>wifi0: Use hw queue 9 for beacons <6>wifi0: Atheros 2315 WiSoC: mem=0xb0000000, irq=3 tainted modules Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/ath_ahb.o Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/wlan_scan_ap.o Using /lib/modules/2.4.25-LSDK-5.3.1.46/net/wlan_scan_sta.o ap_start <6>device eth0 entered promiscuous mode <6>br0: port 1(eth0) entering learning state ath1 ioctl: No such device ath1 <mapping sub-ioctl wds to cmd 0x8BE0-39> <mapping sub-ioc<4>(bw)ioctl:set chanbw->full tl chanbw to cmd 0x8BE0-60> <mapping sub-ioctl hide_ssid to cmd 0x8BE0-19> <mapping sub-ioctl ap_bridge to cmd 0x8BE0-20> ap_bridge <mapping sub-ioctl bintval to cmd 0x8BE0-29> <mapping sub-ioctl dtim_period to cmd 0x8BE0-28> <mapping sub-ioctl doth to cmd 0x8BE0-30> <mapping sub-ioctl wmm to cmd 0x8BE0-18> <mapping sub-ioctl turbo to cmd 0x8BE0-1> <mapping sub-ioctl compression to cmd 0x8BE0-33> <ma<6>device ath1 entered promiscuous mode <6>br0: port 2(ath1) entering learning state pping sub-ioctl ff to cmd 0x8BE0-34> <mapping sub-ioctl protmode to cmd 0x8BE0-4> ath2 ath3 <6>br0: port 1(eth0) entering forwarding state <6>br0: topology change detected, propagating ath4 <mapping sub-ioctl maccmd to cmd 0x8BE0-17> <mapping sub-ioctl maccmd to cmd 0x8BE0-17> <mapping sub-ioctl maccmd to cmd 0x8BE0-17> killall: udhcpc: no process killed route: SIOC[ADD|DEL]RT: No such process <6>br0: port 2(ath1) entering forwarding state <6>br0: topology change detected, propagating killall: hostapd: no process killed rc_action: app=wan, action=start rc starting wan rc_action: app=dnsrelay, action=start rc starting dnsrelay rc_action: app=ipt, action=create rc creating cfg for ipt rc_action: app=ipt, action=start rc starting ipt rc_action: app=ipt-nat, action=start rc starting ipt-nat rc_action: app=ipt-fw, action=start rc starting ipt-fw rc_action: app=udhcpd, action=create rc creating cfg for udhcpd rc_action: app=udhcpd, action=start rc starting udhcpd rc_action: app=ntpc, action=start rc starting ntpc rc_action: app=snmpd, action=create rc creating cfg for snmpd rc_action: app=snmpd, action=start rc starting snmpd rc_action: app=syslog, action=create rc creating cfg for syslog rc_action: app=syslog, action=start rc starting syslog Dec 31 19:00:23 crond[230]: crond 2.3.2 dillon, started, log level 8 snmptrap: Unknown host (0.0.0.0') (No such file or directory) BusyBox v1.00-pre10 (2009.04.17-09:35+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off #


Tags

toh/engenius/ecb3500.txt · Last modified: 2018/06/01 13:36 by tmomas