OpenRG bootlog

HOME HUB V2B

/ # cat /proc/kmsg <4>[ 0.000000] PORTA2: detected HW revision 7 <4>[ 0.000000] <4>[ 0.000000] Applying Patch for CPU1 IRQ Issue <4>[ 0.000000] memsize=64M <4>[ 0.000000] Reserving memory for CP1 @0xa3f00000 <4>[ 0.000000] memsize=63M <4>[ 0.000000] CPU revision is: 00019641 <4>[ 0.000000] Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. <4>[ 0.000000] Primary data cache 16kB 4-way, linesize 32 bytes. <4>[ 0.000000] Linux version 2.4.21openrg-rmk1 #4 Thu Apr 2 13:03:40 IDT 2009 <4>[ 0.000000] Determined physical RAM map: <4>[ 0.000000] memory: 00100000 @ 03f00000 (reserved) <4>[ 0.000000] User-defined physical RAM map: <4>[ 0.000000] memory: 03f00000 @ 00000000 (usable) <4>[ 0.000000] On node 0 totalpages: 16128 <4>[ 0.000000] zone(0): 16128 pages. <4>[ 0.000000] zone(1): 0 pages. <4>[ 0.000000] zone(2): 0 pages. <4>[ 0.000000] Kernel command line: mem=64512K <4>[ 0.000000] mips_counter_frequency:166666667 <4>[ 0.000000] r4k_offset: 00196e6a(1666666) <4>[ 0.000000] Calibrating delay loop... 222.00 BogoMIPS <6>[ 0.240000] Memory: 51256k/64512k available (2371k kernel code, 13256k reserved, 9608k data, 8k init, 0k highmem) <6>[ 1.090000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 1.090000] Inode cache hash table entries: 4096 (order: 3, 32768 bytes) <6>[ 1.090000] Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>[ 1.090000] Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) <4>[ 1.090000] Page-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>[ 1.090000] Checking for 'wait' instruction... unavailable. <4>[ 1.090000] POSIX conformance testing by UNIFIX <4>[ 1.100000] PCI: Probing PCI hardware on host bus 0. <4>[ 1.100000] Autoconfig PCI channel 0x802a9180 <4>[ 1.100000] Scanning bus 00, I/O 0x1ae00000:0x1b000001, Mem 0x18000000:0x1a000001 <4>[ 1.100000] 00:0e.0 Class 0200: 168c:ff1d (rev 01) <4>[ 1.100000] Mem at 0x18000000 [size=0x10000] <6>[ 1.100000] Linux NET4.0 for Linux 2.4 <6>[ 1.100000] Based upon Swansea University Computer Society NET3.039 <4>[ 1.100000] Initializing RT netlink socket <4>[ 1.100000] Starting kswapd <6>[ 1.100000] Journalled Block Device driver loaded <4>[ 1.100000] fuse init (API version 7.5) <6>[ 1.100000] Initializing Cryptographic API <6>[ 1.100000] loop: loaded (max 8 devices) <6>[ 1.100000] SCSI subsystem driver Revision: 1.00 <6>[ 1.100000] md: raid0 personality registered as nr 2 <6>[ 1.100000] md: raid1 personality registered as nr 3 <6>[ 1.100000] md: raid5 personality registered as nr 4 <6>[ 1.100000] raid5: measuring checksumming speed <4>[ 1.150000] 8regs : 225.200 MB/sec <4>[ 1.200000] 32regs : 286.800 MB/sec <4>[ 1.200000] raid5: using function: 32regs (286.800 MB/sec) <6>[ 1.200000] md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>[ 1.200000] md: Autodetecting RAID arrays. <6>[ 1.200000] md: autorun ... <6>[ 1.200000] md: ... autorun DONE. <6>[ 1.200000] NET4: Linux TCP/IP 1.0 for NET4.0 <6>[ 1.200000] IP Protocols: ICMP, UDP, TCP, IGMP <6>[ 1.200000] IP: routing cache hash table of 512 buckets, 4Kbytes <6>[ 1.200000] TCP: Hash tables configured (established 4096 bind 8192) <6>[ 1.200000] IPv4 over IPv4 tunneling driver <6>[ 1.200000] GRE over IPv4 tunneling driver <6>[ 1.200000] NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>[ 1.200000] IPv6 v0.8 (usagi-stable-4.1, 20030214) for NET4.0 <6>[ 1.200000] IPv6 over IPv4 tunneling driver <1>[ 1.200000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> <1>[ 1.200000] All bugs added by David S. Miller <davem@redhat.com> <6>[ 1.200000] usb.c: registered new driver usbdevfs <6>[ 1.200000] usb.c: registered new driver hub <6>[ 1.200000] Initializing USB Mass Storage driver... <6>[ 1.200000] usb.c: registered new driver usb-storage <6>[ 1.200000] USB Mass Storage support registered. <6>[ 1.200000] cgu: misc_register on minor = 63 <4>[ 1.200000] ppe: ATM init succeeded (firmware version 1.1.0.2.1.13) <4>[ 1.200000] Infineon DEU initialization. <6>[ 1.200000] deu_init(): calling ifxdeu_init_des() <4>[ 1.200000] ifxdeu des initialize! <6>[ 1.200000] deu_init(): calling ifxdeu_init_aes() <4>[ 1.200000] ifxdeu aes initialize! <1>[ 1.200000] ifxdeu nitialized OK. Device Major : 254 <4>[ 1.200000] danube MAC driver loaded! <6>[ 1.200000] gptu: totally 6 16-bit timers/counters <6>[ 1.200000] gptu: misc_register on minor 62 <6>[ 1.200000] gptu: succeeded to request irq 118 <6>[ 1.200000] gptu: succeeded to request irq 119 <6>[ 1.200000] gptu: succeeded to request irq 120 <6>[ 1.200000] gptu: succeeded to request irq 121 <6>[ 1.200000] gptu: succeeded to request irq 122 <6>[ 1.200000] gptu: succeeded to request irq 123 <6>[ 1.200000] DANUBE MIPS24KEc MPS mailbox driver, Version 1.2.6 <6>[ 1.200000] (c) Copyright 2006, Infineon Technologies AG <4>[ 1.200000] ifx_mps_init_gpt_danube() - attaching to rising edge... <4>[ 1.200000] ifx_mps_init_gpt_danube() - calibration done, waited 718 loops! <6>[ 1.210000] IFX_MPS: using proc fs <6>[ 1.210000] NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V 8-bit) <6>[ 1.210000] Scanning device for bad blocks <5>[ 1.260000] Creating 3 MTD partitions on "Danube Nand Controller": <5>[ 1.260000] 0x00000000-0x02000000 : "OpenRG Images" <5>[ 1.260000] 0x01e00000-0x02000000 : "Dect configuration" <5>[ 1.260000] 0x00000000-0x00004000 : "Atheros EEPROM" <4>[ 1.260000] Init NAND controller succeeded! <1>[ 1.260000] oamk: init_module() called. <1>[ 1.270000] Opening oam kernel socket <1>[ 1.270000] oamk: init_module() returned. <4>[ 1.270000] Danube Port Initialization <4>[ 1.270000] ttyS0 at MEM 0xbe100400 (irq = 2) is a IFX_ASC <4>[ 1.270000] ttyS1 at MEM 0xbe100c00 (irq = 9) is a IFX_ASC <4>[ 1.280000] VFS: Mounted root (tmpfs filesystem). <4>[ 1.280000] Mount of initial cramfs successful <6>[ 1.490000] Freeing init cramfs memory: 64k freed <6>[ 1.490000] Freeing unused kernel memory: 8k freed <4>[ 1.490000] Mounting cramfs image at 'cramfs' <6>[ 1.490000] klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: 1.99 <4>[ 2.150000] Algorithmics/MIPS FPU Emulator v1.5 <4>[ 6.080000] Danube MEI version:1.00.09 <4>[ 6.080000] Danube MEI MIB version:0.90.04 <7>[ 6.140000] mib_poll_init: Starting mib_poll... <7>[ 6.240000] adsl_mib_poll: Inside mib poll loop ... <4>[ 7.200000] Loading license 27b32d1bd167c7b5b96d2bbcc29f318d838bc6844712cfe1d10442762c9a506f3036fbf3e00e190cfe9456043a9ae4fb972b876fffed17b576a146f89e6a3111c94f32611b221145371bb7f5b3398c0de42b7cffe847cecc617866872263ef.SHC <4>[ 7.200000] loading license key: SHC <4>[ 7.250000] loading license key: SHC <6>[ 8.130000] JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. <6>[ 8.570000] ath_hal: 0.9.14.25 (AR5416, REGOPS_FUNC) <6>[ 9.080000] wlan: 0.8.4.2 (Atheros/multi-bss) <6>[ 9.130000] ath_rate_atheros: Version 2.0.1 <4>[ 9.130000] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved <6>[ 9.180000] ath_dfs: Version 2.0.0 <4>[ 9.180000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved <6>[ 9.290000] wlan: mac acl policy registered <6>[ 9.670000] ath_pci: 0.9.4.5 (Atheros/multi-bss) <6>[ 9.670000] ath_pci: CR-LSDK-1.3.1.115 <6>[ 9.680000] Changelist :0 Date: 0 <4>[ 9.690000] Chan Freq RegPwr HT CTL CTL_U CTL_L DFS <4>[ 9.690000] 1 2412n 20 HT20 1 0 1 N <4>[ 9.690000] 1 2412n 20 HT40 1 0 1 N <4>[ 9.690000] 2 2417n 20 HT40 1 0 1 N <4>[ 9.690000] 3 2422n 20 HT40 1 1 1 N <4>[ 9.690000] 4 2427n 20 HT40 1 1 1 N <4>[ 9.690000] 5 2432n 20 HT40 1 1 1 N <4>[ 9.690000] 6 2437n 20 HT40 1 1 1 N <4>[ 9.690000] 7 2442n 20 HT40 1 1 1 N <4>[ 9.690000] 8 2447n 20 HT40 1 1 1 N <4>[ 9.690000] 9 2452n 20 HT40 1 1 1 N <4>[ 9.690000] 10 2457n 20 HT40 1 1 1 N <4>[ 9.690000] 11 2462n 20 HT40 1 1 1 N <4>[ 9.690000] 12 2467n 20 HT40 1 1 0 N <4>[ 9.690000] 13 2472n 20 HT40 1 1 0 N <4>[ 9.700000] dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0 <4>[ 9.700000] DFS min filter rssiThresh = 21 <4>[ 9.700000] DFS max pulse dur = 131 ticks <4>[ 9.740000] wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps <4>[ 9.740000] wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 <4>[ 9.740000] wifi0: mac 31.1 phy 11.0 radio 13.0 <4>[ 9.740000] wifi0: Use hw queue 1 for WME_AC_BE traffic <4>[ 9.740000] wifi0: Use hw queue 0 for WME_AC_BK traffic <4>[ 9.740000] wifi0: Use hw queue 2 for WME_AC_VI traffic <4>[ 9.740000] wifi0: Use hw queue 3 for WME_AC_VO traffic <4>[ 9.740000] wifi0: Use hw queue 8 for CAB traffic <4>[ 9.740000] wifi0: Use hw queue 9 for beacons <4>[ 9.740000] wifi0: Use hw queue 7 for UAPSD <6>[ 9.740000] wifi0: Atheros 5416 Owl emulation: mem=0x18000000, irq=22 hw_base=0xb8000000 <5>[ 10.040000] jffs2_get_inode_nodes(): Data CRC failed on node at 0x0011c11c: Read 0x687bbb27, calculated 0x6aa61935 <6>[ 24.560000] RATELIMIT: 2 messages of type IPSec kernel packet reported 23 second(s) ago <4>[ 24.560000] ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0 <4>[ 24.770000] IPV4 device driver registered <4>[ 25.050000] IFX TAPI, version 3.6.1.11, (c) 2007 Infineon Technologies AG IFX VMMC device driver, version 1.2.1.9, (c) 2007 Infineon Technologies AG <4>[ 25.350000] <4>[ 25.460000] 73M1966 Driver, Rev. 2.2.1, (c) 2007 Teridian Semiconductor Corp. <4>[ 25.460000] Config DANUBE FXO reset using GPIO-10 <4>[ 25.460000] Config DANUBE FXO interrupt using GPIO-1 <4>[ 25.460000] Config DANUBE FXO Chip Select using GPIO-9 <4>[ 25.460000] Config DANUBE FS <4>[ 25.470000] Config DANUBE PCLK <4>[ 25.500000] <4>[ 25.500000] <4>[ 25.500000] 73M1966 TAPI CTL, version 1.3.7, (c) 2007 Teridian Semiconductor Corp. <4>[ 25.500000] <4>[ 25.500000] m1966_tapi_ctl_init: CHRDEV registration completed successfully <6>[ 25.840000] dwc3884-hcd: irq 54, addr be101000 <6>[ 25.840000] usb.c: new USB bus registered, assigned bus number 1 <6>[ 25.970000] hub.c: USB hub found <6>[ 25.970000] hub.c: 1 port detected <7>[ 25.970000] dwc3884-hcd.c:1089: set_port_feature(c034d440, 0x8, 1) <7>[ 25.970000] dwc3884-hcd.c:1099: USB_PORT_FEAT_POWER <4>[ 27.470000] Vinetic: Using BBD file UK_BT_FXS.BIN <4>[ 28.570000] ok! <4>[ 28.570000] Version 11.3.1.1.0 up and running... <4>[ 28.770000] <4>[ 28.770000] m1966_tapi_open: dev_major:[221], dev_minor:[0] <4>[ 28.770000] m1966_tapi_open: Open Tapi DAA Driver, successful, device: 0 <4>[ 28.770000] m1966_process_ctl: COUNTRY:UK <4>[ 28.770000] FXO RESET 0->1 <4>[ 30.300000] VINETIC chip capabilities: <4>[ 30.300000] Type: 0 Specific: 0 Description: INFINEON TECHNOLOGIES <4>[ 30.300000] Type: 1 Specific: 6 Description: VMMC <4>[ 30.300000] Type: 2 Specific: 0 Description: POTS <4>[ 30.300000] Type: 2 Specific: 1 Description: PSTN <4>[ 30.300000] Type: 11 Specific: 6 Description: DEVICE TYPE <4>[ 30.300000] Type: 10 Specific: 258 Description: DEVICE VERSION <4>[ 30.300000] Type: 4 Specific: 0 Description: DSP <4>[ 30.300000] Type: 3 Specific: 12 Description: G.726 16 kbps <4>[ 30.300000] Type: 3 Specific: 13 Description: G.726 24 kbps <4>[ 30.300000] Type: 3 Specific: 14 Description: G.726 32 kbps <4>[ 30.300000] Type: 3 Specific: 15 Description: G.726 40 kbps <4>[ 30.300000] Type: 3 Specific: 8 Description: u-LAW <4>[ 30.300000] Type: 3 Specific: 9 Description: A-LAW <4>[ 30.300000] Type: 3 Specific: 1 Description: G.723 6.3kbps


This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2019/09/08 11:54
  • by tmomas