Show pagesourceOld revisionsBacklinksBack to top × Table of Contents Agestar NSB3AS Supported Versions Hardware Highlights Installation Hardware Info Photos Opening the case Serial Original Firmware Info Tags Agestar NSB3AS This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. 1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. 2) OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. General features: Ethernet & USB2.0 combination interface Suitable for 3.5“ SATA HDD Supports FTP and DHCP Supports network print server Supports BT download Data transfer is twice as fast as competing models Supports Samba server on LAN Compatible with DSL routers/modems Under network environment, it supports one 10/100Mbps Ethernet port Password management provides secure access to HDD and web management Supports hardware reset function by pressing the reset switch Hot USB available for external enclosure, Udisk, HUB…devices Supported Versions BrandModelVersionCurrent ReleaseOEM InfoForum TopicTechnical DataAgestarNSB3AS14.07https://forum.openwrt.org/viewtopic.php?id=31242View/Edit data Hardware Highlights ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSBNSB3ASStar STR8132150832---1-Yes Installation ModelVersionCurrent ReleaseFirmware OpenWrt InstallFirmware OpenWrt UpgradeFirmware OEM StockNSB3AS14.07https://downloads.openwrt.org/barrier_breaker/14.07/cns21xx/generic/openwrt-cns21xx-nsb3ast-squashfs.img → Install OpenWrt (generic explanation) Please add the installation procedure here. Hardware Info Architecture: Bootloader: U-Boot System-On-Chip: CNS2132 CPU Speed: 250 Mhz Flash-Chip: ST 25P64V6P Flash size: 8 MiB RAM-Chip: RAM size: 32 MiB Serial: Yes JTAG: Yes Photos Opening the case Note: This will void your warranty! To remove the cover do a/b/c Insert description here Main PCB Serial → port.serial general information about the serial port, serial port cable, etc. How to connect to the Serial Port (UART) of this specific device: [6] [5] [ ] [ ] [2] [1] 1 : TX 2 : RX 5 : VCC 3.3V 6 : GND Speed - 38400 Data bits - 8 Stop bits - 1 Parity - None Flow control - XON/XOFF Original Firmware Info The lastest original firmware (V01R07 at 5/10/2009) can be found Here Tags cns21xx, STR8132, 8Flash, 32RAM, FastEthernet, 1NIC, 0WNIC, no switch, USB, MIPS, MIPS32, NAS This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.OKMore information about cookies cns21xx str8132 8Flash 32RAM fastethernet 1nic 0wnic no switch usb mips mips32 nas Last modified: 2021/11/12 03:18by danitool