TP-Link VC220-G3u V2

BGA IC Xtal:1 DDR3 init. DRAMC init done.  Calculate size. DRAM size=128MB Set new TRFC. ddr-1066 7512DRAMC V1.2.2 (0) Set SPI Flash Clock to 25 Mhz EN751221 at Fri Mar 19 05:35:52 UTC 2021 version 1.1 free bootbase Memory size 128MB Set SPI Flash Clock to 25 Mhz spi\_nand\_probe: mfr\_id=0xc8, dev\_id=0x1 Dected SPI NAND Flash : \_SPI\_NAND\_DEVICE\_ID\_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81  BMT & BBT Init Success  Press any key in 1 secs to enter boot command mode. ............ Invalid Power GPIO, just return and don't turn on Power LED  not find tclinux\_slave partition flash\_base=0,flash\_tclinux\_start=80000,TCLINUX\_SLAVE\_FLASH\_START=fff80000 > > > > CTC: boot\_flag\_addr: 120000; flag: 30 \==\> boot flag = 0g\_kernel\_tag\_start = 1e0000 the tag fsLen is 0xe88000, fsAddr is 0x200000, kernelLen is 0x1576a3, kernelAddr is 0x200 \==\> startAddr = 0x80006530 Decompress to 80002000 free\_mem\_ptr=80E00000 free\_mem\_ptr\_end=80780000 75xx: 0x0 Uncompressing [LZMA] ...  done. \==\> jumpAddr = 0x80006530 Linux version 2.6.36 (root@af68b6d08a32) (gcc version 4.3.6 (Buildroot 2012.05) ) \#74 SMP Wed Nov 20 02:02:23 UTC 2024 ISPRAM0: PA=00330000,Size=00010000,enabled memsize:128MB EcoNet EN751221 SOC prom init bootconsole [early0] enabled CPU revision is: 00019558 (MIPS 34Kc) Determined physical RAM map:  memory: 07fe0000 @ 00020000 (usable) Wasting 1024 bytes for tracking 32 unused pages Zone PFN ranges:   Normal   0x00000020 -\> 0x00008000 Movable zone start PFN for each node early\_node\_map[1] active PFN ranges     0: 0x00000020 -\> 0x00008000 3 available secondary CPU TC(s) PERCPU: Embedded 7 pages/cpu @81103000 s7264 r8192 d13216 u65536 pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16\*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3  Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32480 Kernel command line:  es=1 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=00061f0e Readback ErrCtl register=00061f0e nmi base is 8115c200 Memory: 125224k/130944k available (3288k kernel code, 5720k reserved, 669k data, 208k init, 0k highmem) SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation.         RCU-based detection of stalled CPUs is disabled.         Verbose stalled-CPUs detection is disabled. NR\_IRQS:64 CPU frequency 900.00 MHz  Using 199.968 MHz high precision timer. console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Calibrating delay loop... 598.01 BogoMIPS (lpj=2990080) pid\_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 34K sync es set to 1. Config7: 0x80080500 Limit of 4 TCs set TLB of 64 entry pairs shared by 2 VPEs VPE 0: TC 0 1 2, VPE 1: TC 3 IPI buffer pool of 16 buffers CPU revision is: 00019558 ((null)) TC 1 going on-line as CPU 1 CPU revision is: 00019558 ((null)) TC 2 going on-line as CPU 2 CPU revision is: 00019558 ((null)) TC 3 going on-line as CPU 3 Brought up 4 CPUs kworker/u:0 used greatest stack depth: 14864 bytes left NET: Registered protocol family 16 MT7512\_pcie\_init check pcie link up status:  isRC0\_LINKUP=1  isRC1\_LINKUP=1  registering PCI controller with io\_map\_base unset bio: create slab \<bio-0\> at 0 pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x202fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0:   bridge window [io  disabled] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff] pci 0000:00:00.0:   bridge window [mem pref disabled] pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit pref] pci 0000:02:00.0: BAR 0: set to [mem 0x20100000-0x201fffff 64bit pref] (PCI address [0x20100000-0x201fffff] pci 0000:02:00.0: BAR 2: assigned [mem 0x20200000-0x20203fff 64bit pref] pci 0000:02:00.0: BAR 2: set to [mem 0x20200000-0x20203fff 64bit pref] (PCI address [0x20200000-0x20203fff] pci 0000:02:00.0: BAR 4: assigned [mem 0x20204000-0x20204fff 64bit pref] pci 0000:02:00.0: BAR 4: set to [mem 0x20204000-0x20204fff 64bit pref] (PCI address [0x20204000-0x20204fff] pci 0000:00:01.0: PCI bridge to [bus 02-02] pci 0000:00:01.0:   bridge window [io  disabled] pci 0000:00:01.0:   bridge window [mem 0x20100000-0x202fffff] pci 0000:00:01.0:   bridge window [mem pref disabled] PCI: Enabling device 0000:00:00.0 (0000 -\> 0002) PCI: Enabling device 0000:00:01.0 (0000 -\> 0002) NET: Registered protocol family 8 NET: Registered protocol family 20 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1  mt7512\_pcie\_fixup: 0x1438 = 20000014   mt7512\_pcie\_fixup: 0x3438 = 20100015   mt7512\_pcie\_rc1\_retrain: 80 = 0147dc12 80 = 01608c12 RC1 Link Traing Result: 10120008 TC3162 hardware watchdog module loaded. kworker/u:0 used greatest stack depth: 14860 bytes left squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.15) msgmni has been set to 244 io scheduler noop registered (default) ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162 brd: module loaded SPI Flash Init Start Found no SPI flash device Register flash device:flash0 IS\_SPIFLASH=0x0, IS\_NANDFLASH=0x2, (0xBFA10114)=0x6) SPI\_NAND\_Flash\_init: before init, mtx\_mode\_tog=0xl9, manaul\_en=0x1 spi\_nand\_probe: mfr\_id=0xc8, dev\_id=0x1 Dected SPI NAND Flash : \_SPI\_NAND\_DEVICE\_ID\_F50L1G41LB, Flash Size=0x8000000 Support SPI NAND erase statistic. MAX\_ERASE\_CNT\_START\_OFFSET:52, MAX\_ERASE\_CNT\_START\_OFFSET\_MAPPING:16 spi nand flash tc3162: flash device 0x01000000 at 0x1c000000 EN7512 mtd init: spi nand probe enter [spi\_nand\_setup] : Enter  NAND device: Manufacturer ID: 0xc8, Chip ID: 0x01 (Unknown \_SPI\_NAND\_DEVICE\_ID\_F50L1G41LB) nand\_scan\_ident ok [spi\_nand\_setup]: chip size =  0x8000000, erase\_shift=0x11 calc\_bmt\_pool\_size : need\_valid\_block\_num=0x51, total\_block=0x400 File:drivers/mtd/chips/spi\_nand\_flash.c===\>Function:spi\_nand\_setup Line:4846 bmt\_pool\_size=81 bmt pool size: 81  Init bmt table, size: 81 bmt count: 81, system count: 943 begin to search BMT from block 1023  Match bmt signature @ block: 1023 Valid BMT, version v1 bmt found at block: 1023, mapped block: 0 Load bmt data success @ block 1023  BMT v1.total 0 mapping recover\_bmt, block index: 0 recover\_bmt, BMT table[-1]: bad\_index=0, mapped\_index=64 Match bbt signature  BBT Checksum is: 0x1 Valid BBT, version v1 bbt found, bad block count: 0 Load bbt data success  BMT & BBT Init Success  Creating 11 MTD partitions on "EN7512-SPI\_NAND": 0x000000000000-0x000000020000 : "boot" 0x000000020000-0x0000000a0000 : "romfile" 0x0000000a0000-0x0000001a0000 : "config" 0x0000001a0000-0x0000001e0000 : "radio" 0x0000001e0000-0x0000003e0000 : "kernel" 0x0000003e0000-0x0000023e0000 : "rootfs" 0x0000001e0000-0x0000023e0000 : "ker\_rofs" 0x0000023e0000-0x0000025e0000 : "kernel\_2" 0x0000025e0000-0x0000045e0000 : "rootfs\_2" 0x0000023e0000-0x0000045e0000 : "ker\_rofs\_2" 0x0000045e0000-0x000007300000 : "reserve\_area" \---------spiflash\_ioctl\_read, addr:120000------ mtd[config]: map address 00120000 to offset 00080000 rootfs PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 RT3xxx EHCI/OHCI init. TP-LINK Kernel Monitor Initializing... Mirror/redirect action on u32 classifier     Actions configured Netfilter messages via NETLINK v0.30. nf\_conntrack version 0.5.0 (1956 buckets, 51200 max) ctnetlink v0.93: registering with nfnetlink. GRE over IPv4 tunneling driver ip\_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 \---------spiflash\_ioctl\_read, addr:ff48------ mtd[boot]: map address 0000ff48 to offset 0000ff48 ip6\_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear [greearb@candelatech.com](mailto:greearb@candelatech.com) All bugs added by David S. Miller [davem@redhat.com](mailto:davem@redhat.com) VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Freeing unused kernel memory: 208k freed starting pid 307, tty '': '/etc/init.d/rcS' mount used greatest stack depth: 14832 bytes left cp used greatest stack depth: 14192 bytes left hotplug used greatest stack depth: 13840 bytes left SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb BGA USB PHY config port 0 u2\_slew\_rate\_calibration FM\_OUT value = 152(0x00000098) SR calibration value = 4 port 1 u2\_slew\_rate\_calibration FM\_OUT value = 149(0x00000095) SR calibration value = 4 USB driver version: 751221.2.20160516 xhc\_mtk xhc\_mtk: xHCI Host Controller xhc\_mtk xhc\_mtk: new USB bus registered, assigned bus number 1 xhc\_mtk xhc\_mtk: irq 18, io mem 0x1fb90000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhc\_mtk xhc\_mtk: xHCI Host Controller xhc\_mtk xhc\_mtk: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usblp module\_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint TC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Nov 20 2024-02:02:49). \---------spiflash\_ioctl\_read, addr:1a0000------ mtd[radio]: map address 001a0000 to offset 00000000 \---------spiflash\_ioctl\_read, addr:1c0000------ mtd[radio]: map address 001c0000 to offset 00020000 [0x1a0000]:0x9275 [0x1c0000]:0x6376 tccicmd V1.1.0.0 (Nov 20 2024-02:02:52) ERROR\!Create /etc/fwTCver.conf fail\! macType = 0 qdma\_lan: physical\_size is 0x00200000 ether.c:v1.00-NAPI 29.Mar.2015 eth0: FE MAC Ethernet address: 5C:A6:E6:0D:F5:04 init eth\_vlan proc. init eth\_forward proc. \---------spiflash\_ioctl\_read, addr:147000------ mtd[config]: map address 00147000 to offset 000a7000 \----we are in the ewan mode----- User Internal switch ,type 10 Disable EWAN Port MAC Learning\! Disable forward\! tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 9412   7512 Fe,   [tcPhyInit] in  [tcPhyInit] out , r31 = (8, 0xb000)  tcPhyVerLookUp 4085 9412   7512 Fe,   [tcPhyInit] in  [tcPhyInit] out , r31 = (9, 0xb000)  tcPhyVerLookUp 4085 9412   7512 Fe,   [tcPhyInit] in  [tcPhyInit] out , r31 = (10, 0xb000)  tcPhyVerLookUp 4085 9412   7512 Fe,   [tcPhyInit] in  [tcPhyInit] out , r31 = (11, 0xb000)  tcPhyVerLookUp 4085 9451   7512 Ge,   [tcPhyInit] in  [tcPhyInit] out , r31 = (12, 0x0)  tcPhyVerLookUp 4085 9451   7512 Ge,   [tcPhyInit] in  [tcPhyInit] out , r31 = (12, 0x0)    GE Rext AnaCal Done\! (1)(0x21)     GE Rext AnaCal Done\! (1)(0x21)     GE R50 AnaCal Done\! (2) (0x27)(0xa7)    GE R50 AnaCal Done\! (1) (0x28)(0xa8)    GE R50 AnaCal Done\! (1) (0x28)(0xa8)    GE R50 AnaCal Done\! (2) (0x27)(0xa7)   GE Tx offset AnaCal Done\! (1)(0x21)    GE Tx offset AnaCal Done\! (2)(0x22)    GE Tx offset AnaCal Done\! (2)(0x2)    GE Tx offset AnaCal Done\! (2)(0x2)    GE Tx amp AnaCal Done\! (pair-0)(0x12)(0x5410)  GE Tx amp AnaCal Done\! (13) (0x13)  GE Tx amp AnaCal Done\! (pair-1)(0x17)(0x1310)  GE Tx amp AnaCal Done\! (15) (0x11)  GE Tx amp AnaCal Done\! (pair-2)(0x19)(0x1520)  GE Tx amp AnaCal Done\! (13) (0x13)  GE Tx amp AnaCal Done\! (pair-3)(0x21)(0x920)  GE Tx amp AnaCal Done\! (25) (0x7) tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 0  tcPhyVerLookUp 4085 9412   7512 Fe,   FE-8 R50 AnaCal Done\! (4)(0x1c)  FE-8 Tx offset AnaCal Done\! (4)(3)(0x3)    FE-8 Tx amp AnaCal Done\! (8)(0xa)    FE-8 Tx amp AnaCal Done\! (8)(0xa)   tcPhyVerLookUp 4085 9412   7512 Fe,   FE-9 R50 AnaCal Done\! (3)(0x1d)  FE-9 Tx offset AnaCal Done\! (3)(-1)(0x21)    FE-9 Tx amp AnaCal Done\! (1)(0x13)    FE-9 Tx amp AnaCal Done\! (1)(0x13)   tcPhyVerLookUp 4085 9412   7512 Fe,   FE-10 R50 AnaCal Done\! (3)(0x1d)  FE-10 Tx offset AnaCal Done\! (3)(1)(0x1)    FE-10 Tx amp AnaCal Done\! (1)(0x11)    FE-10 Tx amp AnaCal Done\! (1)(0x11)   tcPhyVerLookUp 4085 9412   7512 Fe,   FE-11 R50 AnaCal Done\! (4)(0x1c)  FE-11 Tx offset AnaCal Done\! (4)(-2)(0x22)    FE-11 Tx amp AnaCal Done\! (8)(0xa)    FE-11 Tx amp AnaCal Done\! (7)(0xb)   tcPhyVerLookUp 4085 9451   7512 Ge,  Dying Gasp 0.31 init oenmap 0 oenmap2 0 Exec. Successful Exec. Successful Exec. Successful macType = 0 qdma\_wan: qdma\_bmgr.c [2644]: HW\_FWD physical size is not illegal, force setting to 4MB qdma\_wan: physical\_size is 0x00400000 Exec. Successful Exec. Successful Exec. Successful eth0: starting interface. netif\_start\_queue mount used greatest stack depth: 13784 bytes left dns\_init \#\#\#\#\#\#\#\#\#\# register wan ddos fun\#\#\#\#\#\#\#\#\# Power Manager 0.2 init \*reg=000030c0 value:7f130000 \*reg=0000201c value:cc010101 \*reg=0000211c value:cc010101 \*reg=0000221c value:cc010101 \*reg=0000231c value:cc010101 \*reg=0000241c value:cc010101 \*reg=0000251c value:cc010101 \*reg=0000261c value:cc010101 Exec. Successful Please press Enter to activate this console. iptables used greatest stack depth: 13768 bytes left [ dm\_readFile ] 2061:  can not open xml file /var/tmp/pc/reduced\_data\_model.xml\!, about to open file /etc/reduced\_data\_model.xml [ oal\_sys\_readCfgFlash ] 1160:  the config addr is a0000 \---------spiflash\_ioctl\_read, addr:a0000------ mtd[config]: map address 000a0000 to offset 00000000 [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgFlash]readFlash  addr:a0000 ---------- \---------spiflash\_ioctl\_read, addr:25000------ [mtd[romfile]: map address 00025000 to offset 00005000  initKernelMoni---------spiflash\_ioctl\_read, addr:22000------ mtd[romfile]: map address 00022000 to offset 00002000 torFd ] 433:  \*km---------spiflash\_ioctl\_read, addr:23000------ mtd[romfile]: map address 00023000 to offset 00003000 Fd=6 [ initKe---------spiflash\_ioctl\_read, addr:26000------ mtd[romfile]: map address 00026000 to offset 00006000 rnelMonitorFd ] ---------spiflash\_ioctl\_read, addr:27000------ mtd[romfile]: map address 00027000 to offset 00007000 457:  registered fd 6 with kernel monitor ## [ rea---------spiflash\_ioctl\_read, addr:40000------ mtd[romfile]: map address 00040000 to offset 00020000 dFlash\_exec ] 441:  --------spiflash\_ioctl\_read, addr:43000------ mtd[romfile]: map address 00043000 to offset 00023000 [1;33;40m-------------[oal\_sys\_readDevId---------spiflash\_ioctl\_read, addr:46000------ mtd[romfile]: map address 00046000 to offset 00026000 Flash]readFlash---------spiflash\_ioctl\_read, addr:47000------ mtd[romfile]: map address 00047000 to offset 00027000   addr:25000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readMacFlash]readFlash  addr:22000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readPinFlash]readFlash  addr:23000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readWlPwd]readFlash  addr:26000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readWlGuestPwd]readFlash  addr:27000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readBackUpMac]readFlash  addr:40000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readBackUpPin]readFlash  addr:43000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readBackUpWlPwd]readFlash  addr:46000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readBackUpWlGuestPwd]readFlash  addr:47000 ---------- ---------spiflash\_ioctl\_read, addr:1e0000------ mtd[kernel]: map address 001e0000 to offset 00000000 [ readFlash\_exec ] 441:  -------------[oal\_sys\_getAddHverFlash]readFlash  addr:1e0000 ---------------spiflash\_ioctl\_read, addr:22000------ mtd[romfile]: map address 00022000 to offset 00002000 [ readFlas---------spiflash\_ioctl\_read, addr:146000------ mtd[config]: map address 00146000 to offset 000a6000 h\_exec ] 441:  ---------spiflash\_ioctl\_read, addr:160000------ mtd[config]: map address 00160000 to offset 000c0000 \----------------------spiflash\_ioctl\_read, addr:160000------ mtd[config]: map address 00160000 to offset 000c0000 [oal\_sys\_readMacFlash]readFlash  addr:22000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgFRInfo]readFlash  addr:146000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgRBInfo]readFlash  addr:160000 ---------- [ rsl\_initDevInfo ] 1723:  may be power cut\! [ readmtd[config]: map address 00160000 to offset 000c0000 Flash\_exec ] 441:  -------------[oal\_sys\_writeCfgRB---------spiflash\_ioctl\_write, addr:160000------ mtd[config]: map address 00160000 to offset 000c0000 Info]readFlash  addr:160000 ---------- [ writ---------spiflash\_ioctl\_read, addr:148000------ mtd[config]: map address 00148000 to offset 000a8000 eFlash\_exec ] 481:  -------------[oal\_sys\_writeCfgRBInfo]writeFlash  addr:160000 ---------- [ readFlash\_exec ] 441:  -------------[readSysToolsFlag]readFlash  addr:148000 ---------- tcsmux version: tcsmux V1.1.0.0 (Nov  8 2019-14:50:16). vlantag\_drv\_init HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSzie:80B, foeNum:16384 IP check use Black List checkpoint 1141 build proc\_entry tc3162/hwnat\_ttnet\_limiting\_rate success\!\! insmod used greatest stack depth: 13704 bytes left oal\_initUserCfgObj Generating 1024 bit dss key, this may take a while... Generating 2048 bit rsa key, this may take a while... ioctl: No such device device eth0.2 entered promiscuous mode device eth0 entered promiscuous mode br0: port 1(eth0.2) entering forwarding state br0: port 1(eth0.2) entering forwarding state Chain EB\_FORWARD\_LAN\_TO\_GUEST already exists. device eth0.3 entered promiscuous mode br0: port 2(eth0.3) entering forwarding state br0: port 2(eth0.3) entering forwarding state Chain EB\_FORWARD\_LAN\_TO\_GUEST already exists. device eth0.4 entered promiscuous mode br0: port 3(eth0.4) entering forwarding state br0: port 3(eth0.4) entering forwarding state done valid subcommands: adsl                                                             valid subcommands: adsl                                                             valid subcommands: adsl                                                             valid subcommands: adsl                                                             ra0       no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1186:  can't open /var/tmp/ap\_stats\_2g \---------spiflash\_ioctl\_read, addr:22000------ mtd[romfile]: map address 00022000 to offset 00002000 [ readFlash\_exec ] 441:  -------------[oal\_sys\_readMacFlash]readFlash  addr:22000 ---------- ra0       no private ioctls. open DNS error: No such file or directory [ oal\_sys\_getOldTZInfo ] 717:  Open TZ file error\! Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCR1KMSuDC0QEbxgN1+f19Dnvq/77k7UN5hunxDzXNK7VaxpNZ5lpMHKR37Z7EpdfKu266HYn8FjCEvWmi46M4II3exobP/zpKZpHG/um+9ZDRMYBu Fingerprint: sha1\!\! 30:37:1d:a1:f3:5e:55:40:23:e2:7d:ca:ab:a6:24:7e:b0:85:c8:07 Public key portion is: ssh-dss AAAAB3NzaC1kc3MAAACBAKTiwFIW4sz5KUSThhGzOq5DpIH59ga4ltsTsebzFiY9lXMv8WyWYrjU3u990xriZBm6iOyxaYntQjFJiej5h1mcCtCDHisyInBJwpmk+ZZWgxD+E563EmgG36u Fingerprint: sha1\!\! ba:ff:10:2e:0d:0b:e9:9f:93:ca:d0:ae:c7:e1:dc:0f:df:e0:50:5f MT7603: register rlt\_drv PCI: Enabling device 0000:01:00.0 (0000 -\> 0002) MT7603:  \=== pAd = c2002000, size = 1394504 === ## MT7603: line:843 --\>RTMPAllocTxRxRingMemory \<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x \<-- RTMPAllocAdapterBlock, Status=0 MT7603: pAd-\>CSRBaseAddress =0xc1f00000, csr\_addr=0xc1f00000\! MT7603: device\_id =0x7603 MT7603: RtmpChipOpsHook(474): Not support for HIF\_MT yet\! MT7603: mt7603\_init()--\> MT7603: mt\_bcn\_buf\_init(224): Not support for HIF\_MT yet\! MT7603: \<--mt7603\_init() MT7603: load\_dev\_l1profile()--\> MT7603: RtmpOSFileOpen(): Error 2 opening /etc/wireless/l1profile.dat MT7603: load\_dev\_l1profile() Open file "/etc/wireless/l1profile.dat" failed, try embedded default\! MT7603: load l1profile failed\! insmod used greatest stack depth: 13320 bytes left oal\_wlan\_ra\_guest\_accessControl,7591 ---------spiflash\_ioctl\_read, addr:146000------ mtd[config]: map address 00146000 to offset 000a6000 [ readFl---------spiflash\_ioctl\_read, addr:160000------ mtd[config]: map address 00160000 to offset 000c0000 ash\_exec ] 441:  -------------[oal\_sys\_readCfgFRInfo]readFlash  addr:146000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgRBInfo]readFlash  a---------spiflash\_ioctl\_read, addr:146000------ mtd[config]: map address 00146000 to offset 000a6000 ddr:160000 ---------------spiflash\_ioctl\_read, addr:160000------ mtd[config]: map address 00160000 to offset 000c0000 oal\_wlan\_ra\_guest\_accessControl,7597 oal\_wlan\_ra\_guest\_accessControl,7591 [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgFRInfo]readFlash  addr:146000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgRBInfo]readFlash  addr:160000 ---------- oal\_wlan\_ra\_guest\_accessControl,7597 oal\_wlan\_ra\_guest\_accessControl,7591 oal\_wlan\_ra\_guest\_accessControl,7597 MT7603: ra0: ===\> MainVirtualIF\_open MT7603: load\_dev\_l1profile()--\> MT7603: RtmpOSFileOpen(): Error 2 opening /etc/wireless/l1profile.dat MT7603: load\_dev\_l1profile() Open file "/etc/wireless/l1profile.dat" failed, try embedded default\! MT7603: load l1profile failed\! MT7603: line:385 RTMPInitTxRxRingMemory MT7603: TxRing[0]: total 64 entry initialized MT7603: TxRing[1]: total 64 entry initialized MT7603: TxRing[2]: total 64 entry initialized MT7603: TxRing[3]: total 64 entry initialized MT7603: TX\_BCN DESC a6beb000 size = 320 MT7603: RX[0] DESC a6be1000 size = 1024 MT7603: RX[1] DESC a6be2000 size = 1024 MT7603: cfg\_mode=9 MT7603: cfg\_mode=9 MT7603: wmode\_band\_equal(): Band Equal\! MT7603: MAP\_MODE=0 MT7603: Key1Str is Invalid key length(0) or Type(0) MT7603: Key1Str is Invalid key length(0) or Type(0) MT7603: Key1Str is Invalid key length(0) or Type(0) MT7603: Key1Str is Invalid key length(0) or Type(0) MT7603: Key2Str is Invalid key length(0) or Type(0) MT7603: Key2Str is Invalid key length(0) or Type(0) MT7603: Key2Str is Invalid key length(0) or Type(0) MT7603: Key2Str is Invalid key length(0) or Type(0) MT7603: Key3Str is Invalid key length(0) or Type(0) MT7603: Key3Str is Invalid key length(0) or Type(0) MT7603: Key3Str is Invalid key length(0) or Type(0) MT7603: Key3Str is Invalid key length(0) or Type(0) MT7603: Key4Str is Invalid key length(0) or Type(0) MT7603: Key4Str is Invalid key length(0) or Type(0) MT7603: Key4Str is Invalid key length(0) or Type(0) MT7603: Key4Str is Invalid key length(0) or Type(0) MT7603: pAd-\>reg\_domain = 1 MT7603: SKUenable=1 MT7603: Smart Carrier Sense = 1 MT7603: FW Version:MT7603: CMT7603: LMT7603: 1MT7603: 7MT7603: 3MT7603: 7MT7603: 6MT7603: 6MT7603: \_MT7603: RMT7603:  MT7603: FW Build Date:MT7603: 2MT7603: 0MT7603: 1MT7603: 7MT7603: 1MT7603: 1MT7603: 1MT7603: 0MT7603: 1MT7603: 0MT7603: 5MT7603: 9MT7603: 3MT7603: 2MT  MT7603: CmdAddressLenReq:(ret = 0) MT7603: CmdFwStartReq: override = 1, address = 1048576 MT7603: CmdStartDLRsp: WiFI FW Download Success MT7603: AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) MT7603: FwloadFlag=0 efuse\_probe: efuse = 10000002 MT7603: RtmpChipOpsEepromHook::e2p\_type=2, inf\_Type=5 MT7603: RtmpEepromGetDefault::e2p\_dafault=1 MT7603: RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 MT7603: NVM is FLASH mode, dev\_idx [0] FLASH OFFSET [0x1A0000], SIZE [0x200] MT7603: 1. Phy Mode = 14 exec\! \---------spiflash\_ioctl\_read, addr:1a0000------ mtd[radio]: map address 001a0000 to offset 00000000 \==============eeFlashId: 0x7592 ==================== MT7603: @@@  NICReadEEPROMParameters : pAd-\>FWLoad=0  MT7603: Country Region from e2p = ffff tssi\_1\_target\_pwr\_g\_band = 34 MT7603: 2. Phy Mode = 14 MT7603: 3. Phy Mode = 14 MT7603: NICInitPwrPinCfg(14): Not support for HIF\_MT yet\! MT7603: NICInitializeAsic(588): Not support rtmp\_mac\_sys\_reset () for HIF\_MT yet\! MT7603: mt\_mac\_init()--\> MT7603: mt7603\_init\_mac\_cr()--\> MT7603: AsicSetMacMaxLen(1927): Set the Max RxPktLen=1024\! MT7603: \<--mt\_mac\_init() MT7603:         WTBL Segment 1 info: MT7603:                 MemBaseAddr/FID:0x28000/0 MT7603:                 EntrySize/Cnt:32/128 MT7603:         WTBL Segment 2 info: MT7603:                 MemBaseAddr/FID:0x40000/0 MT7603:                 EntrySize/Cnt:64/128 MT7603:         WTBL Segment 3 info: MT7603:                 MemBaseAddr/FID:0x42000/64 MT7603:                 EntrySize/Cnt:64/128 MT7603:         WTBL Segment 4 info: MT7603:                 MemBaseAddr/FID:0x44000/128 MT7603:                 EntrySize/Cnt:32/128 MT7603: AntCfgInit(2763): Not support for HIF\_MT yet\! MT7603: RTMPSetPhyMode(): channel out of range, use first ch=0 MT7603: MCS Set = ff ff 00 00 01 MT7603: mt7603\_switch\_channel(): Switch to Ch\#1(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#2(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#3(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#4(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#5(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#6(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#7(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#8(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#9(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#10(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#11(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#12(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#13(2T2R), BBP\_BW=0 MT7603: mt7603\_switch\_channel(): Switch to Ch\#1(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#2(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#3(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#4(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#5(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#6(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#7(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#8(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: Fallback to 20MHz, AP count[10], threshold[5] MT7603: [PMF]ap\_pmf\_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=4, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=5, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: AsicSetRalinkBurstMode(4350): Not support for HIF\_MT yet\! MT7603: RTMPSetPiggyBack(961): Not support for HIF\_MT yet\! MT7603: mt7603\_switch\_channel(): Switch to Ch\#1(2T2R), BBP\_BW=0 MT7603: AsicSetTxPreamble(4337): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8 MT7603: AsicSetPreTbtt(): bss\_idx=0, PreTBTT timeout = 0xa0 MT7603: Main bssid = 5c:a6:e6:0d:f5:04 \<==== rt28xx\_init, Status=0 MT7603: @@@ ed\_monitor\_init : ===\> MT7603: @@@ ed\_monitor\_init : \<=== MT7603: WiFi Startup Cost (ra0): 15.920s MT7603: RTMPSetLEDStatus::LedMode=1, LED\_CMD=0, Status=3 MT7603: RTMPSetLEDStatus: LED\_CMD:0x0, LED Mode:0x1, LinkStatus:0x20 ifconfig used greatest stack depth: 13000 bytes left [ oal\_wlan\_ra\_initMultiAp ] 3927:  vapName = ra0   MT7603: [Set\_Bh\_Bss\_Proc]: ra0 DevOwnRole 0x20 MT7603: [Set\_Fh\_Bss\_Proc]: ra0 DevOwnRole 0x20 MT7603: Set\_MapR2\_Proc: MAP R2 is enabled device ra0 entered promiscuous mode br0: port 4(ra0) entering forwarding state br0: port 4(ra0) entering forwarding state device ra1 entered promiscuous mode device ra2 entered promiscuous mode device ra3 entered promiscuous mode device ra4 entered promiscuous mode device ra5 entered promiscuous mode \---------spiflash\_ioctl\_read, addr:1a0000------ mtd[radio]: map address 001a0000 to offset 00000000 [ readFlash\_exec ] 441:  -------------[oal\_sys\_read2gRadioFlash]readFlash  addr:1a0000 ---------- WLAN-Start wlNetlinkTool Waiting for Wireless EMT7603: cfg\_mode=9 MT7603: wmode\_band\_equal(): Band Equal\! vents from interfaces... swWlanChkAhbErr: netlink to do MT7603: mt7603\_switch\_channel(): Switch to Ch\#1(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#2(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#3(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#4(2T2R), BBP\_BW=0 MT7603: SYNC - BBP R4 to 20MHz.l MT7603: mt7603\_switch\_channel(): Switch to Ch\#1(2T2R), BBP\_BW=0 MT7603: ==\>SetSCSEnable\_Proc (ON) [Debug]Set ra0 SCSEnable=1 2G WiFi performance tuning start MT7603: Set\_ed\_chk\_proc()::ed\_chk=0 ra0       mac:[0x10618]:d7083f0f   MT7603: CURRENT: Set ManualTxOP = 0  2G WiFi performance tuning done MT7603: AsicSetPreTbtt(): bss\_idx=0, PreTBTT timeout = 0x0 MT7603: RTMPSetPiggyBack(961): Not support for HIF\_MT yet\! MT7603: System halted, removed or MlmeRest, exit MlmeTask\!(QNum = 1) MT7603: [PMF]ap\_pmf\_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=4, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: [PMF]ap\_pmf\_init:: apidx=5, MFPC=0, MFPR=0, SHA256=0 MT7603: [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 MT7603: AsicSetRalinkBurstMode(4350): Not support for HIF\_MT yet\! MT7603: RTMPSetPiggyBack(961): Not support for HIF\_MT yet\! MT7603: mt7603\_switch\_channel(): Switch to Ch\#1(2T2R), BBP\_BW=0 MT7603: AsicSetTxPreamble(4337): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: AsicAddSharedKeyEntry(2093): Not support for HIF\_MT yet\! MT7603: The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8 MT7603: AsicSetPreTbtt(): bss\_idx=0, PreTBTT timeout = 0xa0 MT7603: Main bssid = 5c:a6:e6:0d:f5:04 Interface doesn't accept private ioctl... set (8BE2): Invalid argument rai0      no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1176:  can't open /var/tmp/ap\_stats\_5g rai0      no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1176:  can't open /var/tmp/ap\_stats\_5g rai0      no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1176:  can't open /var/tmp/ap\_stats\_5g rai0      no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1176:  can't open /var/tmp/ap\_stats\_5g rai0      no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1176:  can't open /var/tmp/ap\_stats\_5g rai0      no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1176:  can't open /var/tmp/ap\_stats\_5g rai0      no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1176:  can't open /var/tmp/ap\_stats\_5g rai0      no private ioctls. [ oal\_intf\_getWlanIntfStats ] 1176:  can't open /var/tmp/ap\_stats\_5g \---------spiflash\_ioctl\_read, addr:22000------ mtd[romfile]: map address 00022000 to offset 00002000 [ readFlash\_exec ] 441:  -------------[oal\_sys\_readMacFlash]readFlash  addr:22000 ---------- rai0      no private ioctls. The remaining IMEM space cannot accommodate section .imem\_text \!\! Remaining IMEM space: 368 bytes Section Size: 7388 bytes open DNS error: No such file or directory MT7613: register rtpci PCI: Enabling device 0000:02:00.0 (0000 -\> 0002) MT7613:  \=== pAd = c3102000, size = 3243584 === MT7613: \<-- RTMPAllocAdapterBlock, Status=0 MT7613: pAd-\>PciHif.CSRBaseAddress =0xc3000000, csr\_addr=0xc3000000\! MT7613: RTMPInitPCIeDevice():device\_id=0x7663 MT7613: mt\_pci\_chip\_cfg(): HWVer=0x8b10, FWVer=0x8a01, pAd-\>ChipID=0x7663 MT7613: mt7663\_init()--\> MT7613: \<--mt7663\_init() MT7613: \<-- RTMPAllocTxRxRingMemory, Status=0 MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: RtmpOSFileOpen(): Error 2 opening /etc/wireless/l1profile.dat MT7613: Read file "/etc/wireless/l1profile.dat" failed(errCode=1)\! MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) oal\_wlan\_ra\_guest\_accessControl,7591 \---------spiflash\_ioctl\_read, addr:146000------ mtd[config]: map address 00146000 to offset 000a6000 [ readF---------spiflash\_ioctl\_read, addr:160000------ mtd[config]: map address 00160000 to offset 000c0000 lash\_exec ] 441:  -------------[oal\_sys\_readCfgFRInfo]readFlash  addr:146000 ---------- [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgRBInfo]readFlash  addr:160000 ---------- oal\_wlan\_ra\_guest\_accessContro---------spiflash\_ioctl\_read, addr:146000------ mtd[config]: map address 00146000 to offset 000a6000 l,7597 oal\_wlan---------spiflash\_ioctl\_read, addr:160000------ mtd[config]: map address 00160000 to offset 000c0000 \_ra\_guest\_accessControl,7591 [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgFRInfo]readFlash  addr:146000 ---------- oal\_wlan\_ra\_guest\_accessControl,7597 oal\_wlan\_ra\_guest\_accessControl,7591 [ readFlash\_exec ] 441:  -------------[oal\_sys\_readCfgRBInfo]readFlash  addr:160000 ---------- oal\_wlan\_ra\_guest\_accessControl,7597 iptables: Chain already exists. Chain EB\_FORWARD\_GUEST already exists. MT7613: rai0: ===\> main\_virtual\_if\_open MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: RtmpOSFileOpen(): Error 2 opening /etc/wireless/l1profile.dat MT7613: Read file "/etc/wireless/l1profile.dat" failed(errCode=1)\! MT7613: load l1profile failed\! MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: get\_wdev\_by\_idx: invalid idx(0) MT7613: driver\_own()::Try to Clear FW Own... MT7613: driver\_own()::Success to clear FW Own MT7613: SSID[0]=Techolay\_5GHz, EdcaIdx=0 MT7613: SSID[1]=Misafir1\_F4FE\_5GHz, EdcaIdx=0 MT7613: SSID[2]=Misafir2\_F4FE\_5GHz, EdcaIdx=0 MT7613: SSID[3]=Misafir3\_F4FE\_5GHz, EdcaIdx=0 MT7613: SSID[4]=yl3hov3sLrS2bapNoewrhWUZDK6O5K, EdcaIdx=0 MT7613: SSID[5]=Zm50qgvTBEUyYAsm3OllL6Zu5N8pUZ, EdcaIdx=0 MT7613: cfg\_mode=15 MT7613: cfg\_mode=15 MT7613: cfg\_mode=15 MT7613: wmode\_band\_equal(): Band Equal\! MT7613: auto\_ch\_select\_set\_cfg(): BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 MT7613: BssIdx(0) wdev-\>channel=0 MT7613: BssIdx(1) wdev-\>channel=0 MT7613: BssIdx(2) wdev-\>channel=0 MT7613: BssIdx(3) wdev-\>channel=0 MT7613: BssIdx(4) wdev-\>channel=0 MT7613: BssIdx(5) wdev-\>channel=0 MT7613: Index0 Channel=0 MT7613: [TxPower] BAND0: 100 MT7613: [SKUenable] BAND0: 1 MT7613: profile: FragThreshold[0]=2346 MT7613: APEdca0 MT7613: APEdca1 MT7613: APEdca2 MT7613: APEdca3 MT7613: RTMPSetProfileParameters(): ACSCheckTime[0]=3600 seconds MT7613: read\_itxbf: ITxBfEn = 0 MT7613: read\_itxbf: BSSID[0] MT7613: read\_itxbf: MBSS[0] ITxBfEn = 0 MT7613: read\_itxbf: More BSSID[1] MT7613: read\_itxbf: More MBSS[1] ITxBfEn = 0 MT7613: read\_itxbf: More BSSID[2] MT7613: read\_itxbf: More MBSS[2] ITxBfEn = 0 MT7613: read\_itxbf: More BSSID[3] MT7613: read\_itxbf: More MBSS[3] ITxBfEn = 0 MT7613: read\_itxbf: More BSSID[4] MT7613: read\_itxbf: More MBSS[4] ITxBfEn = 0 MT7613: read\_itxbf: More BSSID[5] MT7613: read\_itxbf: More MBSS[5] ITxBfEn = 0 MT7613: read\_itxbf: Common.ITxBfEn = 0 MT7613: read\_etxbf: ETxBfEnCond = 1 MT7613: read\_etxbf: BSSID[0] MT7613: read\_etxbf: MBSS[0] ETxBfEnCond = 1 MT7613: read\_etxbf: More BSSID[1] MT7613: read\_etxbf: More MBSS[1] ETxBfEnCond = 1 MT7613: read\_etxbf: More BSSID[2] MT7613: read\_etxbf: More MBSS[2] ETxBfEnCond = 1 MT7613: read\_etxbf: More BSSID[3] MT7613: read\_etxbf: More MBSS[3] ETxBfEnCond = 1 MT7613: read\_etxbf: More BSSID[4] MT7613: read\_etxbf: More MBSS[4] ETxBfEnCond = 1 MT7613: read\_etxbf: More BSSID[5] MT7613: read\_etxbf: More MBSS[5] ETxBfEnCond = 1 MT7613: [RTMPSetProfileParameters]Disable DFS/Zero wait=0/0 MT7613: MAP\_MODE=0 MT7613: HT: WDEV[0] Ext Channel = BELOW MT7613: pAd-\>reg\_domain = 1 MT7613: WtcSetMaxStaNum: MaxStaNum:110, BssidNum:6, WdsNum:0, ApcliNum:1, MaxNumChipRept:16, MinMcastWcid:128 MT7613: Top Init Done\! MT7613: Use dev\_alloc\_skb MT7613: RX[0] DESC a2ecd000 size = 2048 MT7613: RX[1] DESC a2ece000 size = 2048 MT7613: cut\_through\_init(): ct sw token number = 2047 MT7613: cut\_through\_token\_list\_init(): TokenList inited done\!id\_head/tail=0/2048 MT7613: cut\_through\_token\_list\_init(): 82f50588,82f50588 MT7613: cut\_through\_token\_list\_init(): TokenList inited done\!id\_head/tail=0/2048 MT7613: cut\_through\_token\_list\_init(): 82f50598,82f50598 MT7613: Hif Init Done\! MT7613: ctl-\>txq = c3413edc MT7613: ctl-\>rxq = c3413ee8 MT7613: ctl-\>ackq = c3413ef4 MT7613: ctl-\>kickq = c3413f00 MT7613: ctl-\>tx\_doneq = c3413f0c MT7613: ctl-\>rx\_doneq = c3413f18 MT7613: mt7663\_fw\_prepare():using E2 ROM patch MT7613: mt7663\_fw\_prepare():using E2 firmware MT7613: Parsing patch header MT7613:         Built date: MT7613: 2MT7613: 0MT7613: 1MT7613: 0MT7613: 0MT7613: 7MT7613: 2MT7613: 0MT7613: 1MT7613: 5MT7613: dMT7613: aMT7613: 1MT761  MT7613:  MT7613:         Platform: MT7613: 7MT7613: 6MT7613: 6MT7613: 3MT7613:  MT7613:         HW/SW version: MT7613: 0xMT7613: 65MT7613: 32MT7613: 2dMT7613: 31MT7613:  MT7613:         Patch version: MT7613: 0xMT7613: 38MT7613: 30MT7613: 32MT7613: 8aMT7613:  MT7613:         Target address: 0xdc000, length: 211488 MT7613: patch is not ready && get semaphore success MT7613: Start address = 0xdc000, DL length = 211488, Data mode = 0x80000000 MT7613: EventGenericEventHandler: CMD Success MT7613: MtCmdAddressLenReq:(ret = 0) MT7613: MtCmdPatchFinishReq MT7613: EventGenericEventHandler: CMD Success MT7613: release patch semaphore MT7613: Parsing CPU 0 fw tailer MT7613:         Chip ID: MT7613: 0xMT7613: 08MT7613:  MT7613:         Eco version: MT7613: 0xMT7613: 01MT7613:  MT7613:         Region number: MT7613: 0xMT7613: 03MT7613:  MT7613:         Format version: MT7613: 0xMT7613: 02MT7613:  MT7613:         Format flag: MT7613: 0xMT7613: 01MT7613:  MT7613:         Ram version: MT7613: 7MT7613: 6MT7613: 6MT7613: 3MT7613: mMT7613: pMT7613: 1MT7613: 8MT7613: 2MT7613: 7MT7613:  MT7613:         Built date: MT7613: 2MT7613: 0MT7613: 2MT7613: 2MT7613: 0MT7613: 9MT7613: 2MT7613: 1MT7613: 1MT7613: 7MT7613: 4MT7613: 4MT7613: 5MT761          Common crc: 0x403e6fdb MT7613: Parsing tailer region 0 MT7613:         Decomp crc: 0x0 MT7613:         Decomp size: 0x0 MT7613:         Decomp block size: 0x0 MT7613:         Target address: 0x112c00 MT7613:         Download size: 274464 MT7613:         Feature set: MT7613: 0xMT7613: 27MT7613:  MT7613: Parsing tailer region 1 MT7613:         Decomp crc: 0x0 MT7613:         Decomp size: 0x0 MT7613:         Decomp block size: 0x0 MT7613:         Target address: 0x2018400 MT7613:         Download size: 57632 MT7613:         Feature set: MT7613: 0xMT7613: 07MT7613:  MT7613: Parsing tailer region 2 MT7613:         Decomp crc: 0x0 MT7613:         Decomp size: 0x0 MT7613:         Decomp block size: 0x0 MT7613:         Target address: 0x40100000 MT7613:         Download size: 14736 MT7613:         Feature set: MT7613: 0xMT7613: 07MT7613:  MT7613:      \_