User Tools

Site Tools


inbox:toh:sercomm:sercomm_vox30_v1

Sercomm Vox30 v1

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

LA Vodafone Pawore Station è l'evoluzione della sua precedente VSR è un modem router dalle alte prestazioni distribuito nel mercato italiano come VPS e nel mercato irlandese come gigabox. Il Router Vodafone Power Station SHG 3000 (Sercomm) utilizza un alimentatore da 2,5A 50-60 Hz 100-220 V ha una porta telefonico DSL e due porte telefoniche 4 porte 10/100/1000 ethernet rj45 e una giga wan ha una porta sfp per l'installazione di un eventuale mini Ont. Supporta adsl/adsl2+ (20 Mbit), vdsl2 17a/35b/g.fast/g.inp (200 Mbit), FTTH (1 Gbit) (mediante ont sfp),Wi-Fi 2.4ghz a, b, g, n (3 antenne/450 Mbit) e 5.0ghz a, n, ac (4 antenne/1.733 Mbit).

Vodafone Power Station

OpenWrt support

Not supported.

Hardware highlights

CPU Ram Flash Network WLAN USB Serial JTag
Broadcom BCM63136, ARM Cortex A9 Dual Core 1GHz 512 MiB 256 MiB 4x 10/100 /1000 bgnh 2x 2.0 ? ?

Hardware

Info

Architecture EXAMPLE MIPS
Vendor Vodafone italia Vodafone Irlanda
Bootloader ??????????????
System-On-Chip BCM63136SVKFSBG
CPU/Speed 1Ghz
Flash-Chip Macronix MXIC MX8CLF2G18AC-11
Flash size 256 MiB
RAM 512 MiB
Wireless 2.4Ghz Broadcom BCM4360 b/g/n, 3×3, 450Mbit
Wireless 5Ghz Broadcom BCM4366 ARM Cortex A7 800MHz, a/n/ac, 4×4 MU-MIMO, 1733Mbit
Ethernet 10/100/1000 Mbit/s wan support
Wan ADSL [20Mbit-7Mbit] / FTTC [100Mbit/20Mbit][50Mbit/10Mbit][30Mbit/3Mbit]
USB 2x 2.0
Serial ?
JTAG ?

Photos

Davanti
Dietro
Sopra
Sotto sotto.jpg
Parte posteriore
Parte frontale

Photos

Front
Back ASCII���Hisilicon Balong
CPU ASCII���Hisilicon Balong

Opening the case

Rimuovere le tre viti presenti sul fondo dopodiché rimuovere il copri porta usb presente sul retro dove alloggia la vodafone key k5160 e tirare dall'altro esercitando un po di forza. Il pcb e fissato sulla parte frontale con sei viti a stella.

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

FIXME Replace EXAMPLE by real values.

Serial connection parameters
for Sercomm Vox30 v1
EXAMPLE 115200, 8N1

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootlogs

OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE


OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Notes

Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
inbox/toh/sercomm/sercomm_vox30_v1.txt · Last modified: 2019/08/15 16:20 by tmomas