Pour découvrir d'autre carte basés sur Allwiner, veuillez vous référer à cette page : soc.allwinner.sunxi

Model Ports
BananaPi 2x USB, 1x 10/100/1000 Ethernet, MMC, SATA, sortie vidéo RCA, HDMI, audio

Cette carte est disponible depuis de nombreux revendeur, incluant le fabricant lui-même (voir : ici pour BananaPi).

Vous pouvez utiliser votre cavalier habituel, le brochage est :

                           GND TX RX
             J12   o  o  o  o  o  o
{SD slot}          o  o  o  o
  • Veuillez vous référer à soc.allwinner.sunxi pour le SOC Allwinner A20.
  • u-boot et le fichier DTS tout juste publié
  • GMAC ne fonctionne pas à cause de subtile différence de PHY

Veuillez vous référer à : soc.allwinner.sunxi.

U-Boot 2014.04 (Sep 28 2014 - 22:27:22) Allwinner Technology
                                        
CPU:   Allwinner A20 (SUN7I)            
Board: Bananapi
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0                                                          
*** Warning - bad CRC, using default environment                                
                                                                                
In:    serial                                                                   
Out:   serial                                                                   
Err:   serial                                                                   
Net:   dwmac.1c50000                                                            
Hit any key to stop autoboot:  0                                                
reading uEnv.txt                                                                
240 bytes read in 17 ms (13.7 KiB/s)                                            
Loaded environment from uEnv.txt                                                
Running uenvcmd ...                                                             
reading uImage                                                                  
2574432 bytes read in 296 ms (8.3 MiB/s)                                        
reading dtb                                                                     
22849 bytes read in 29 ms (768.6 KiB/s)                                         
## Booting kernel from Legacy Image at 46000000 ...                             
   Image Name:   ARM OpenWrt Linux-3.14.18                                      
   Image Type:   ARM Linux Kernel Image (uncompressed)                          
   Data Size:    2574368 Bytes = 2.5 MiB                                        
   Load Address: 40008000                                                       
   Entry Point:  40008000                                                       
   Verifying Checksum ... OK                                                    
## Flattened Device Tree blob at 49000000                                       
   Booting using the fdt blob at 0x49000000                                     
   Loading Kernel Image ... OK                                                  
   Using Device Tree in place at 49000000, end 49008940                         
                                                                                
Starting kernel ...                                                             
                                                                                
[    0.000000] Booting Linux on physical CPU 0x0                                
[    0.000000] Linux version 3.14.18 (wigyori@trabant) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42689) ) #3 SMP PREEMPT Sun Sep 28 22:28:14 CEST 2014
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d  
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache                                                                         
[    0.000000] Machine model: Lemaker bananaPi                                  
[    0.000000] Memory policy: Data cache writealloc                             
[    0.000000] psci: probing function IDs from device-tree                      
[    0.000000] PERCPU: Embedded 7 pages/cpu @eefdb000 s7104 r8192 d13376 u32768 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)   
[    0.000000] Memory: 1033784K/1048576K available (3647K kernel code, 163K rwdata, 1028K rodata, 190K init, 603K bss, 14792K reserved, 270336K highmem)
[    0.000000] Virtual kernel memory layout:                                    
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)                
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)                
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)                
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)                
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)                
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)                
[    0.000000]       .text : 0xc0008000 - 0xc0498f04   (4676 kB)                
[    0.000000]       .init : 0xc0499000 - 0xc04c8bc0   ( 191 kB)                
[    0.000000]       .data : 0xc04ca000 - 0xc04f2f60   ( 164 kB)                
[    0.000000]        .bss : 0xc04f2f60 - 0xc0589b9c   ( 604 kB)                
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1       
[    0.000000] Preemptible hierarchical RCU implementation.                     
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.            
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2     
[    0.000000] NR_IRQS:16 nr_irqs:16 16                                         
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).            
[    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[    0.000018] Switching to timer-based delay loop                              
[    0.000322] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[    0.000469] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[    0.000626] Console: colour dummy device 80x30                               
[    0.000664] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000679] pid_max: default: 32768 minimum: 301                             
[    0.000843] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)      
[    0.000856] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) 
[    0.006501] CPU: Testing write buffer coherency: ok                          
[    0.006849] /cpus/cpu@0 missing clock-frequency property                     
[    0.006871] /cpus/cpu@1 missing clock-frequency property                     
[    0.006885] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000                 
[    0.006911] Setting up static identity map for 0x40011988 - 0x400119bc       
[    0.060470] CPU1: Booted secondary processor                                 
[    0.060516] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001                 
[    0.060619] Brought up 2 CPUs                                                
[    0.060642] SMP: Total of 2 processors activated.                            
[    0.060648] CPU: All CPU(s) started in HYP mode.                             
[    0.060654] CPU: Virtualization extensions available.                        
[    0.065352] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.065689] pinctrl core: initialized pinctrl subsystem                      
[    0.066069] regulator-dummy: no parameters                                   
[    0.066391] NET: Registered protocol family 16                               
[    0.066654] DMA: preallocated 256 KiB pool for atomic coherent allocations   
[    0.076391] bio: create slab <bio-0> at 0                                    
[    0.076988] reg-fixed-voltage ahci-5v.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[    0.077017] platform ahci-5v.4: Driver reg-fixed-voltage requests probe deferral
[    0.077045] reg-fixed-voltage usb1-vbus.5: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    0.077060] platform usb1-vbus.5: Driver reg-fixed-voltage requests probe deferral
[    0.077083] reg-fixed-voltage usb2-vbus.6: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    0.077098] platform usb2-vbus.6: Driver reg-fixed-voltage requests probe deferral
[    0.077123] reg-fixed-voltage gmac-3v3.8: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[    0.077139] platform gmac-3v3.8: Driver reg-fixed-voltage requests probe deferral
[    0.077567] SCSI subsystem initialized                                       
[    0.078069] usbcore: registered new interface driver usbfs                   
[    0.078133] usbcore: registered new interface driver hub                     
[    0.078251] usbcore: registered new device driver usb                        
[    0.078379] pps_core: LinuxPPS API ver. 1 registered                         
[    0.078389] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.078413] PTP clock support registered                                     
[    0.079312] Switched to clocksource arch_sys_counter                         
[    0.086193] NET: Registered protocol family 2                                
[    0.087283] TCP established hash table entries: 8192 (order: 3, 32768 bytes) 
[    0.087375] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)        
[    0.087498] TCP: Hash tables configured (established 8192 bind 8192)         
[    0.087576] TCP: reno registered                                             
[    0.087594] UDP hash table entries: 512 (order: 2, 16384 bytes)              
[    0.087650] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)         
[    0.087967] NET: Registered protocol family 1                                
[    0.089282] futex hash table entries: 512 (order: 3, 32768 bytes)            
[    0.089509] audit: initializing netlink subsys (disabled)                    
[    0.089578] audit: type=2000 audit(0.070:1): initialized                     
[    0.090111] bounce pool size: 64 pages                                       
[    0.097798] VFS: Disk quotas dquot_6.5.2                                     
[    0.098124] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)       
[    0.100207] squashfs: version 4.0 (2009/01/31) Phillip Lougher               
[    0.100221] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.101013] msgmni has been set to 1491                                      
[    0.102975] io scheduler noop registered                                     
[    0.102995] io scheduler deadline registered                                 
[    0.103044] io scheduler cfq registered (default)                            
[    0.103351] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[    0.105767] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver      
[    0.147015] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled         
[    0.169368] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.775651] console [ttyS0] enabled                                          
[    0.801003] dw-apb-uart 1c29800.serial: Couldn't set LCR to 0                
[    0.807750] dw-apb-uart 1c29800.serial: Couldn't set LCR to 0                
[    0.813529] 1c29800.serial: ttyS1 at MMIO 0x1c29800 (irq = 51, base_baud = 1500000) is a U6_16550A
[    0.844529] dw-apb-uart 1c29c00.serial: Couldn't set LCR to 0                
[    0.851276] dw-apb-uart 1c29c00.serial: Couldn't set LCR to 0                
[    0.857075] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 52, base_baud = 1500000) is a U6_16550A
[    0.866927] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral 
[    0.876819] platform 1c50000.ethernet: Driver stmmaceth requests probe deferral
[    0.884260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver       
[    0.890801] ehci-platform: EHCI generic platform driver                      
[    0.896148] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[    0.903463] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[    0.910777] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver           
[    0.916979] ohci-platform: OHCI generic platform driver                      
[    0.922317] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[    0.929615] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[    0.936966] usbcore: registered new interface driver usb-storage             
[    0.943223] mousedev: PS/2 mouse device common for all mice                  
[    0.949196] input: 1c22800.lradc as /devices/soc.3/1c22800.lradc/input/input0
[    0.966374] input: axp20x-pek as /devices/soc.3/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input1
[    0.976221] LDO1: 1300 mV                                                    
[    0.979620] LDO2: 1800 <--> 3300 mV at 3000 mV                               
[    0.984578] LDO3: 700 <--> 3500 mV at 2275 mV                                
[    0.989236] LDO4: 1250 <--> 3300 mV at 2800 mV                               
[    0.994218] LDO5: 1800 <--> 3300 mV at 2800 mV                               
[    0.999175] DCDC2: 700 <--> 2275 mV at 1400 mV                               
[    1.004386] DCDC3: 700 <--> 3500 mV at 1300 mV                               
[    1.009025] axp20x 0-0034: AXP20X driver loaded                              
[    1.014797] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.023580] sunxi-mmc 1c0f000.mmc: Got CD GPIO #234.                         
[    1.028769] sunxi-mmc 1c0f000.mmc: base:0xf00fc000 irq:64                    
[    1.036497] sunxi-ss 1c15000.crypto-engine: Die ID 0                         
[    1.042984] TCP: cubic registered                                            
[    1.046307] Initializing XFRM netlink socket                                 
[    1.050670] NET: Registered protocol family 17                               
[    1.055212] 8021q: 802.1Q VLAN Support v1.8                                  
[    1.059521] Registering SWP/SWPB emulation handler                           
[    1.064686] registered taskstats version 1                                   
[    1.069093] LDO4: disabling                                                  
[    1.072100] LDO3: disabling                                                  
[    1.075064] regulator-dummy: disabling                                       
[    1.079340] ahci-5v: 5000 mV                                                 
[    1.082750] usb1-vbus: 5000 mV                                               
[    1.086217] usb2-vbus: 5000 mV                                               
[    1.089756] gmac-3v3: 3300 mV                                                
[    1.159363] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    1.166851] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1               
[    1.172755] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    1.181728] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[    1.190667] scsi0 : ahci_platform                                            
[    1.194351] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[    1.259403] stmmaceth 1c50000.ethernet: no reset control found               
[    1.265240]  Ring mode enabled                                               
[    1.268292]  No HW DMA feature register supported                            
[    1.272846]  Normal descriptors                                              
[    1.276169]  TX Checksum insertion supported                                 
[    1.284697] libphy: stmmac: probed                                           
[    1.288113] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active            
[    1.294222] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01)                   
[    1.300008] ehci-platform 1c14000.usb: EHCI Host Controller                  
[    1.305612] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[    1.313490] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000             
[    1.339340] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00            
[    1.345629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002    
[    1.352440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.359668] usb usb1: Product: EHCI Host Controller                          
[    1.364543] usb usb1: Manufacturer: Linux 3.14.18 ehci_hcd                   
[    1.366542] mmc0: host does not support reading read-only switch. assuming write-enable.
[    1.378113] usb usb1: SerialNumber: 1c14000.usb                              
[    1.383225] hub 1-0:1.0: USB hub found                                       
[    1.387012] hub 1-0:1.0: 1 port detected                                     
[    1.391555] ehci-platform 1c1c000.usb: EHCI Host Controller                  
[    1.397163] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    1.405027] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000             
[    1.429331] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00            
[    1.435589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002    
[    1.442397] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.449622] usb usb2: Product: EHCI Host Controller                          
[    1.454497] usb usb2: Manufacturer: Linux 3.14.18 ehci_hcd                   
[    1.459988] usb usb2: SerialNumber: 1c1c000.usb                              
[    1.465049] hub 2-0:1.0: USB hub found                                       
[    1.468833] hub 2-0:1.0: 1 port detected                                     
[    1.473332] ohci-platform 1c14400.usb: Generic Platform OHCI controller      
[    1.479997] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[    1.487829] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400             
[    1.529342] mmc0: new high speed SDHC card at address 0007                   
[    1.535419] mmcblk0: mmc0:0007 SD4GB 3.70 GiB                                
[    1.541226]  mmcblk0: p1 p2                                                  
[    1.549379] ata1: SATA link down (SStatus 0 SControl 300)                    
[    1.553552] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001    
[    1.553560] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.553566] usb usb3: Product: Generic Platform OHCI controller              
[    1.553572] usb usb3: Manufacturer: Linux 3.14.18 ohci_hcd                   
[    1.553577] usb usb3: SerialNumber: 1c14400.usb                              
[    1.554155] hub 3-0:1.0: USB hub found                                       
[    1.554197] hub 3-0:1.0: 1 port detected                                     
[    1.554809] ohci-platform 1c1c400.usb: Generic Platform OHCI controller      
[    1.554841] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[    1.554954] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400             
[    1.613503] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001    
[    1.620312] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.627528] usb usb4: Product: Generic Platform OHCI controller              
[    1.633456] usb usb4: Manufacturer: Linux 3.14.18 ohci_hcd                   
[    1.638938] usb usb4: SerialNumber: 1c1c400.usb                              
[    1.644084] hub 4-0:1.0: USB hub found                                       
[    1.647882] hub 4-0:1.0: 1 port detected                                     
[    1.652366] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)          
[    1.665555] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.674862] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.689116] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    1.696686] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.    
[    1.703713] Freeing unused kernel memory: 188K (c0499000 - c04c8000)         
procd: Console is alive                                                         
procd: - watchdog -                                                             
procd: - preinit -                                                              
probing /dev/mmcblk0 for uboot env data                                         
Detected generic sunxi // generic sunxi                                         
[    2.015607] random: mktemp urandom read with 18 bits of entropy available    
Press the [f] key and hit [enter] to enter failsafe mode                        
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level    
mounting /dev/root                                                              
[    5.243720] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)                    
procd: - early -                                                                
procd: - watchdog -                                                             
procd: - ubus -                                                                 
procd: - init -                                                                 
Please press Enter to activate this console.                                    
[    6.408240] NET: Registered protocol family 10                               
[    6.417447] ip6_tables: (C) 2000-2006 Netfilter Core Team                    
[    6.433935] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0    
[    6.441258] sunxi-rtc 1c20d00.rtc: RTC enabled                               
[    6.457548] ip_tables: (C) 2000-2006 Netfilter Core Team                     
[    6.474170] nf_conntrack version 0.5.0 (16155 buckets, 64620 max)            
[    6.557179] xt_time: kernel timezone is -0000                                
[    6.566402] PPP generic driver version 2.4.2                                 
[    6.578683] NET: Registered protocol family 24                               
[    8.096884] random: nonblocking pool is initialized                          
[    9.590856]  No MAC Management Counters available                            
[    9.600176] device eth0 entered promiscuous mode                             
[    9.620039] br-lan: port 1(eth0) entered forwarding state                    
[    9.625518] br-lan: port 1(eth0) entered forwarding state                    
procd: - init complete -                                                        
[   11.579696] br-lan: port 1(eth0) entered disabled state                      
[   15.579608] libphy: stmmac-0:00 - Link is Up - 1000/Full                     
[   15.584973] br-lan: port 1(eth0) entered forwarding state                    
[   15.590434] br-lan: port 1(eth0) entered forwarding state                    
[   17.589321] br-lan: port 1(eth0) entered forwarding state                    
                                                                                
BusyBox v1.22.1 (2014-09-28 19:27:37 CEST) built-in shell (ash)                 
Enter 'help' for a list of built-in commands.                                   
                                                                                
  _______                     ________        __                                
 |       |.-----.-----.-----.|  |  |  |.----.|  |_                              
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|                             
 |_______||   __|_____|__|__||________||__|  |____|                             
          |__| W I R E L E S S   F R E E D O M                                  
 -----------------------------------------------------                          
 CHAOS CALMER (Bleeding Edge, r42689)                                           
 -----------------------------------------------------                          
  * 1 1/2 oz Gin            Shake with a glassful                               
  * 1/4 oz Triple Sec       of broken ice and pour                              
  * 3/4 oz Lime Juice       unstrained into a goblet.                           
  * 1 1/2 oz Orange Juice                                                       
  * 1 tsp. Grenadine Syrup                                                      
 -----------------------------------------------------                          
root@OpenWrt:/#

root@OpenWrt:/# cat /proc/cpuinfo                                               
processor       : 0                                                             
model name      : ARMv7 Processor rev 4 (v7l)                                   
Features        : swp half thumb fastmult vfp edsp vfpv3 tls vfpv4 idiva idivt v
fpd32 lpae evtstrm                                                              
CPU implementer : 0x41                                                          
CPU architecture: 7                                                             
CPU variant     : 0x0                                                           
CPU part        : 0xc07                                                         
CPU revision    : 4                                                             
                                                                                
processor       : 1                                                             
model name      : ARMv7 Processor rev 4 (v7l)                                   
Features        : swp half thumb fastmult vfp edsp vfpv3 tls vfpv4 idiva idivt v
fpd32 lpae evtstrm                                                              
CPU implementer : 0x41                                                          
CPU architecture: 7                                                             
CPU variant     : 0x0                                                           
CPU part        : 0xc07                                                         
CPU revision    : 4                                                             
                                                                                
Hardware        : Allwinner sun7i (A20) Family                                  
Revision        : 0000                                                          
Serial          : 0000000000000000
root@OpenWrt:/# 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/01 20:12
  • by tmomas