ARMBoot

Developement haltet 2002. Was a sister project of PPCboot which is now U-Boot, so theres a chance that devices with arm boot could use U-Boot which seams to need way less space.

• go - start application at address 'addr'
• run - run commands in an environment variable
• bootm - boot application image from memory
• bootp - boot image via network using BootP/TFTP protocol
• tftpboot- boot image via network using TFTP protocol and env variables ipaddr and serverip
• rarpboot- boot image via network using RARP/TFTP protocol
• bootd - boot default, i.e., run 'bootcmd'
• loads - load S-Record file over serial line
• loadb - load binary file over serial line (kermit mode)
• autoscr - run script from memory
• md - memory display
• mm - memory modify (auto-incrementing)
• nm - memory modify (constant address)
• mw - memory write (fill)
• cp - memory copy
• cmp - memory compare
• crc32 - checksum calculation
• base - print or set address offset
• printenv- print environment variables
• setspi- print environment variables
• getspi- print environment variables
• phywrite- print environment variables
• phyread- print environment variables
• dumpphy- print environment variables
• setenv - set environment variables
• saveenv - save environment variables to persistent storage
• protect - enable or disable FLASH write protection
• erase - erase FLASH memory
• flinfo - print FLASH memory information
• bdinfo - print Board Info structure
• iminfo - print header information for application image
• loop - infinite loop on address range
• mtest - simple RAM test
• reset - Perform RESET of the CPU
• echo - echo args to console
• sleep - delay execution for some time
• download - Perform bootload
• assign - Perform give the device a mac
• version - print monitor version
• help - print online help
• ? - alias for 'help'