Show pageOld revisionsBacklinksBack to top Backlinks This is a list of pages that seem to link back to the current page. Plenty 16MB flash but only 4MB usablePlenty of flash, but only 20MB usable?How to do a 30-30-30 reset?Accidentally delete firewall all zone now router not going up. help of static ip host not foundBetter wireless throughput with OpenWrt than with OEM firmware?Build image for devices with only 4MB flashBuild image for devices with only 16/32MB RAMBuild image for netis wf2220Cannot satisfy dependencies / kernel is not compatibleCan I adjust the transmit power?I can not connect via sshI can not connect via telnetI can not connect via webbrowserI can not use HT40+ with channel 11Change LAN IP in LuCI (to an IP on a different subnet)Command not foundCommon errors when building OpenWrtCould not obtain administrative lockDeauthenticated due to inactivityWhat is the difference between a release and a snapshot build?Disconnected due to excessive missing ACKsHow can I enable SSL for the LuCI web admin gui?Error code 4503Error code 18005Error for wireless request "Set Mode"Failed to download, wget returned 4All FAQ A-ZMeaning of available, free and buffered memoryHow do I install opkg packages on usb stick?How to maximize the wireless throughput?How can I add support for a new device?How can I debug my wireless?How can I donate hardware to OpenWrt?How can I donate money to OpenWrt?How can I help in or contribute to OpenWrt development?How can I obtain OpenWrt firmware images?How can I setup a captive portal or a hotspot?How can I speed up the build process?How do I compile all OpenWrt packages?How do I compile for multiple targets?How do I compile OpenWrt?How do I configure wireless settings?How do I create a package?How do I enable channels 12 and 13?How do I enable WiFi?How do I get started?How do I install OpenWrt?How do I reset the wifi interface?How do I send patches?How do I send PRs (Pull Requests)?How much disk space is needed for compiling?How much time is needed for compiling?How often can I write on the flash chip?How to compile the exact same image as the precompiled ones?How to connect via webbrowserHow to get a list of connected clients?How to get signal strength when client scanning the networkHow do I install packages?How to reset the root passwordHow to scan for wireless networks?I built an image and it's too large! My rootfs is too small! My router does not remember settings!How can I include custom configuration files in my OpenWrt build?What is the initial password for root?What is the initial password for root?Is my device supported?Is package xyz available?I am not reaching theoretical wireless throughputI can not find my package in menuconfigI can not find my router in menuconfigLearn more about the linux wireless subsystemLimitations of combining multiple wireless modes of operationWhy is there both a “Save & Apply” and a “Save” button in LuCi?No space left on deviceOPKG update: Failed to establish connectionOther transmit power issuesPlease choose a file to upgradePlenty 16MB flash but only 4MB usablePlenty of flash, but only 20MB usable?Serial connection can receive but can not sendSerial connection garbled charactersShould I report bugs related to the OpenWrt Buildroot?Too few erase blocksUninstall OpenWrt / back to stock firmwareUpgrade from LEDE to OpenWrtUpgrade from OpenWrt to LEDEThe uploaded file does not contain a supported formatUSB3 HDD not detectedWhat can I do with my wireless?What does DFS mean?What is the difference between the different image formats?What system can I build OpenWrt on?What wireless modes of operation are there?What wireless modes of operation does driver x on hardware y support?Where can I download OpenWrt for my device?Where is the OpenWrt source code?Which packages can I safely remove to save space?Which router should I buy?Which serial adapter should I buy?Which wireless drivers are the best?Wireless regulation in lawEnabling and configuring TACACS+ client on openwrt 23.05Running OpenWrt on Switches FAQ Last modified: 2025/09/23 20:45by kjoshj