| Page | Tags |
|---|
| Better wireless throughput with OpenWrt than with OEM firmware? | FAQ,
Wireless FAQ,
wireless throughput |
| Build image for devices with only 16/32MB RAM | FAQ,
compile openwrt,
imagebuilder,
low ram |
| Build image for devices with only 4MB flash | FAQ,
compile openwrt,
imagebuilder,
low flash,
free space |
| Build image for netis wf2220 | FAQ |
| Can I adjust the transmit power? | FAQ,
Wireless FAQ,
wireless power,
wireless range |
| Cannot satisfy dependencies / kernel is not compatible | FAQ,
after installation,
install packages,
packages,
opkg,
luci,
error,
snapshot |
| Change LAN IP in LuCI (to an IP on a different subnet) | FAQ,
luci,
ip |
| Command not found | FAQ,
after installation,
install packages,
compile packages,
error |
| Common errors when building OpenWrt | FAQ,
Development FAQ,
compile openwrt |
| Could not obtain administrative lock | FAQ,
after installation,
opkg,
install packages,
install,
packages,
error |
| Deauthenticated due to inactivity | FAQ,
Wireless FAQ |
| Disconnected due to excessive missing ACKs | FAQ,
Wireless FAQ |
| Error code 18005 | FAQ,
before installation,
install openwrt,
install,
error,
error code |
| Error code 4503 | FAQ,
before installation,
install openwrt,
install,
error,
error code |
| Error for wireless request "Set Mode" | FAQ,
Wireless FAQ,
error,
wireless modes |
| Failed to download, wget returned 4 | FAQ,
after installation,
wget,
opkg,
luci,
install,
packages,
install packages,
error |
| How can I add support for a new device? | FAQ,
Development FAQ |
| How can I debug my wireless? | FAQ,
Wireless FAQ,
debug |
| How can I donate hardware to OpenWrt? | FAQ,
Development FAQ |
| How can I donate money to OpenWrt? | FAQ,
Development FAQ |
| How can I enable SSL for the LuCI web admin gui? | FAQ,
luci |
| How can I help in or contribute to OpenWrt development? | FAQ,
Development FAQ |
| How can I include custom configuration files in my OpenWrt build? | FAQ,
compile openwrt,
imagebuilder |
| How can I obtain OpenWrt firmware images? | FAQ,
before installation,
install openwrt |
| How can I setup a captive portal or a hotspot? | FAQ,
Wireless FAQ |
| How can I speed up the build process? | FAQ,
Development FAQ,
before installation,
compile openwrt |
| How do I compile all OpenWrt packages? | FAQ,
compile packages,
packages |
| How do I compile for multiple targets? | FAQ,
compile openwrt |
| How do I compile OpenWrt? | FAQ,
compile openwrt |
| How do I configure wireless settings? | FAQ,
Wireless FAQ |
| How do I create a package? | FAQ,
Development FAQ,
compile packages,
packages |
| How do I enable channels 12 and 13? | FAQ,
Wireless FAQ |
| How do I enable WiFi? | FAQ,
Wireless FAQ,
after installation |
| How do I get started? | FAQ,
before installation,
install openwrt |
| How do I install OpenWrt? | FAQ,
before installation,
install openwrt,
install |
| How do I install opkg packages on usb stick? | FAQ,
after installation,
install packages,
install,
packages,
opkg,
low flash,
free space |
| How do I install packages? | FAQ,
after installation,
install,
packages,
install packages,
opkg,
luci |
| How do I reset the wifi interface? | FAQ,
Wireless FAQ |
| How do I send patches? | FAQ,
Development FAQ |
| How do I send PRs (Pull Requests)? | FAQ,
Development FAQ |
| How much disk space is needed for compiling? | FAQ,
Development FAQ,
before installation,
compile openwrt |
| How much time is needed for compiling? | FAQ,
Development FAQ,
before installation,
compile openwrt |
| How often can I write on the flash chip? | FAQ,
before installation,
Hardware FAQ |
| How to compile the exact same image as the precompiled ones? | FAQ,
compile openwrt |
| How to connect via webbrowser | FAQ,
luci |
| How to do a 30-30-30 reset? | FAQ |
| How to get a list of connected clients? | FAQ,
Wireless FAQ |
| How to get signal strength when client scanning the network | FAQ,
Wireless FAQ |
| How to maximize the wireless throughput? | FAQ,
Wireless FAQ,
wireless throughput |
| How to reset the root password | FAQ,
after installation,
login,
password,
ssh,
access |
| How to scan for wireless networks? | FAQ,
Wireless FAQ |
| I am not reaching theoretical wireless throughput | FAQ,
Wireless FAQ,
wireless throughput |
| I built an image and it's too large! My rootfs is too small! My router does not remember settings! | FAQ,
Development FAQ,
before installation,
compile openwrt,
low flash |
| I can not connect via ssh | FAQ,
after installation,
access |
| I can not connect via telnet | FAQ,
after installation,
access |
| I can not connect via webbrowser | FAQ,
after installation,
snapshot,
gui,
luci,
access |
| I can not find my package in menuconfig | FAQ,
Development FAQ,
compile packages,
packages |
| I can not find my router in menuconfig | FAQ,
Development FAQ,
compile openwrt |
| I can not use HT40+ with channel 11 | FAQ,
Wireless FAQ,
wireless throughput |
| Is my device supported? | FAQ,
before installation,
Hardware FAQ |
| Is package xyz available? | FAQ,
after installation,
install packages,
install,
packages |
| Learn more about the linux wireless subsystem | FAQ,
Wireless FAQ |
| Limitations of combining multiple wireless modes of operation | FAQ,
Wireless FAQ,
wireless modes |
| Meaning of available, free and buffered memory | FAQ,
luci,
free space |
| No space left on device | FAQ,
after installation,
free space,
low flash,
opkg,
luci,
install packages,
install,
packages,
error |
| OPKG update: Failed to establish connection | FAQ,
after installation,
opkg,
network,
error |
| Other transmit power issues | FAQ,
Wireless FAQ,
wireless power |
| Please choose a file to upgrade | FAQ,
install openwrt,
install |
| Plenty 16MB flash but only 4MB usable | FAQ,
after installation,
free space,
install packages,
install,
packages,
opkg,
luci |
| Plenty 16MB flash but only 4MB usable | FAQ,
after installation,
free space,
install packages,
install,
packages,
opkg,
luci |
| Plenty of flash, but only 20MB usable? | FAQ,
after installation,
free space,
install packages,
install,
packages,
opkg,
luci |
| Plenty of flash, but only 20MB usable? | FAQ,
after installation,
free space,
install packages,
install,
packages,
opkg,
luci |
| Running OpenWrt on Switches FAQ | FAQ |
| Serial connection can receive but can not send | FAQ,
serial connection |
| Serial connection garbled characters | FAQ,
before installation,
install openwrt,
serial connection |
| Should I report bugs related to the OpenWrt Buildroot? | FAQ,
Development FAQ |
| The uploaded file does not contain a supported format | FAQ,
after installation,
error,
sysupgrade,
upgrade |
| Too few erase blocks | FAQ,
after installation,
free space,
low flash |
| Uninstall OpenWrt / back to stock firmware | FAQ,
after installation |
| Upgrade from LEDE to OpenWrt | FAQ,
upgrade |
| Upgrade from OpenWrt to LEDE | FAQ,
upgrade |
| USB3 HDD not detected | FAQ,
USB FAQ,
after installation |
| What can I do with my wireless? | FAQ,
Wireless FAQ |
| What does DFS mean? | FAQ,
Wireless FAQ |
| What is the difference between a release and a snapshot build? | FAQ,
before installation,
install openwrt |
| What is the difference between the different image formats? | FAQ,
before installation,
install openwrt,
install |
| What is the initial password for root? | FAQ,
after installation,
login,
password,
luci,
ssh,
access |
| What is the initial password for root? | FAQ,
luci |
| What system can I build OpenWrt on? | FAQ,
Development FAQ,
before installation,
compile openwrt |
| What wireless modes of operation are there? | FAQ,
Wireless FAQ,
wireless modes |
| What wireless modes of operation does driver x on hardware y support? | FAQ,
Wireless FAQ,
wireless modes |
| Where can I download OpenWrt for my device? | FAQ,
before installation,
install openwrt |
| Where is the OpenWrt source code? | FAQ,
Development FAQ,
before installation,
compile openwrt |
| Which packages can I safely remove to save space? | FAQ,
compile openwrt,
imagebuilder,
low flash,
free space |
| Which router should I buy? | FAQ,
before installation,
Hardware FAQ |
| Which serial adapter should I buy? | FAQ,
before installation,
install openwrt,
serial connection |
| Which wireless drivers are the best? | FAQ,
Wireless FAQ |
| Why is there both a “Save & Apply” and a “Save” button in LuCi? | FAQ,
luci |
| Wireless regulation in law | FAQ,
Wireless FAQ |