Package table 21.02

Package categories

Clicking on a package category filters the Table of Packages below accordingly, but you can of course filter it manually by yourself.

Filter by category

Table of packages

The table below shows 50 packages per page due to performance reasons.

  • Click on “next page” or “previous page” links in the bottom left to show next or previous 50 packages.
  • Columns can be sorted by clicking on the column header.
  • Enter your filter criteria in the '' white fields ''.

If you click on a package's name in the table below, you will be brought to the package's own page with its documentation; if there is none, feel free to add it.

CategoryNameVersionDependencies...........................................Description...........................................File sizeInstalled sizeLicenseMaintainerBug reportSource code
firmwareath10k-firmware-qca9888-ct-htt2020-11-08-1libc, ath10k-board-qca9888Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

417kB417kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca988x20211216-1libc, ath10k-board-qca988xath10k qca988x firmware

214kB213kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca988x-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca988xAlternative ath10k firmware for QCA988X from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware will NOT be used unless the standard ath10k-firmware-qca988x
is un-selected since the driver will try to load firmware-5.bin before
firmware-2.bin

178kB177kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca988x-ct-full-htt2020-11-08-1libc, ath10k-board-qca988xAlternative ath10k firmware for QCA988X from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and fixes .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware selects and requires the ath10k-ct driver.

178kB177kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca998420211216-1libc, librt, libpthread, ath10k-board-qca9984ath10k qca9984 firmware

506kB509kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca9984-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca9984Alternative ath10k firmware for QCA9984 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 9984 firmware, so select only
one.

458kB460kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9984-ct-full-htt2020-11-08-1libc, ath10k-board-qca9984Alternative ath10k firmware for QCA9984 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

457kB460kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9984-ct-htt2020-11-08-1libc, ath10k-board-qca9984Alternative ath10k firmware for QCA9984 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

396kB398kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca99x020211216-1libc, librt, libpthread, ath10k-board-qca99x0ath10k qca99x0 firmware

363kB364kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca99x0-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca99x0Alternative ath10k firmware for QCA99x0 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 99×0 firmware, so select only
one.

423kB425kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca99x0-ct-full-htt2020-11-08-1libc, ath10k-board-qca99x0Alternative ath10k firmware for QCA99x0 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

423kB425kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca99x0-ct-htt2020-11-08-1libc, ath10k-board-qca99x0Alternative ath10k firmware for QCA99x0 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

385kB387kBOpenWrt teamBug reportsSources
firmwareath6k-firmware20211216-1libc, librt, libpthreadAR600X firmware

696kB695kBFelix FietkauBug reportsSources
firmwareath9k-htc-firmware20211216-1libc, librt, libpthreadAR9271/AR7010 firmware

60kB60kBFelix FietkauBug reportsSources
utilitiesatheepmgr2.1.1-2libcThis utility is intended to investigate the content of Atheros WLAN
chips EEPROM (OTP, boarddata, ART, etc.). It supports data extraction,
unpacking, parsing, dumping in a text form, saving binary data for
further analysis, as well as quick editing of some basic fields (e.g.
MAC address, etc.).

The utility supports both data access methods: direct EEPROM (OTP)
access (via the chip) and offline binary dumps handling.


48kB47kBISCSergey RyazanovBug reportsSources
networkatlas-probe2.6.3-1libc, librt, libopenssl1.1, openssh-client, sudoRIPE Atlas is a global, open, distributed Internet measurement platform,
consisting of thousands of measurement devices that measure Internet
connectivity in real time.

211kB210kBGPL-2.0-or-laterJan PavlinecBug reportsSources
networkatlas-sw-probe5080-2libc, atlas-probe, dropbearconvertRIPE Atlas SW probe is software variant of RIPE Atlas Probe.
It contains utilities which helps actively measure
Internet connectivity through ping, traceroute, DNS, SSL/TLS, NTP, and HTTP.
Data are then collected, aggregated and published by the RIPE NCC.

20kB19kBGPL-3.0-or-laterJan PavlinecBug reportsSources
networkatlas-sw-probe-rpc5080-2libc, librt, libpthread, atlas-probe, bind-dig, rpcdProvides ubus calls for probe.

1kB0kBGPL-3.0-or-laterJan PavlinecBug reportsSources
network---linux-atm-toolsatm-aread2.5.2-7libc, linux-atmLinux ATM tool aread.

2kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-atmaddr2.5.2-7libc, linux-atmLinux ATM tool atmaddr.

2kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-atmdiag2.5.2-7libc, linux-atmLinux ATM tool atmdiag.

2kB1kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-atmdump2.5.2-7libc, linux-atmLinux ATM tool atmdump.

3kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-atmloop2.5.2-7libc, librt, libpthread, linux-atmLinux ATM tool atmloop.

3kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-atmsigd2.5.2-7libc, linux-atmLinux ATM tool atmsigd.

77kB77kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-atmswitch2.5.2-7libc, linux-atmLinux ATM tool atmswitch.

3kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-atmtcp2.5.2-7libc, linux-atmLinux ATM tool atmtcp.

9kB8kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-awrite2.5.2-7libc, librt, libpthread, linux-atmLinux ATM tool awrite.

3kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-bus2.5.2-7libc, linux-atmLinux ATM tool bus.

21kB20kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-debug-tools2.5.2-7libc, librt, libpthread, linux-atmThis package contains the Linux ATM debugging tools.

220kB220kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-diagnostics2.5.2-7libc, linux-atmThis package contains the Linux ATM diagnostics.

6kB6kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-esi2.5.2-7libc, librt, libpthread, linux-atmLinux ATM tool esi.

3kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-ilmid2.5.2-7libc, linux-atmLinux ATM tool ilmid.

25kB25kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-ilmidiag2.5.2-7libc, linux-atmLinux ATM tool ilmidiag.

2kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-lecs2.5.2-7libc, linux-atmLinux ATM tool lecs.

11kB10kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-les2.5.2-7libc, librt, libpthread, linux-atmLinux ATM tool les.

20kB20kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-mpcd2.5.2-7libc, linux-atmLinux ATM tool mpcd.

15kB15kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-saaldump2.5.2-7libc, linux-atmLinux ATM tool saaldump.

26kB25kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-sonetdiag2.5.2-7libc, linux-atmLinux ATM tool sonetdiag.

3kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-svc_recv2.5.2-7libc, librt, libpthread, linux-atmLinux ATM tool svc_recv.

3kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-svc_send2.5.2-7libc, linux-atmLinux ATM tool svc_send.

2kB2kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-tools2.5.2-7libc, linux-atmThis package contains the Linux ATM tools.

20kB19kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-ttcp_atm2.5.2-7libc, linux-atmLinux ATM tool ttcp_atm.

8kB7kBGPL-2.0+OpenWrt teamBug reportsSources
network---linux-atm-toolsatm-zeppelin2.5.2-7libc, linux-atmLinux ATM tool zeppelin.

22kB22kBGPL-2.0+OpenWrt teamBug reportsSources
administrationatop2.6.0-1libc, librt, libpthread, zlib, libncurses6Atop is an ASCII full-screen performance monitor for
Linux that is capable of reporting the activity of all
processes (even if processes have finished during the
interval), daily logging of system and process activity
for long-term analysis, highlighting overloaded system
resources by using colors, etcetera. At regular
intervals, it shows system-level activity related to the
CPU, memory, swap, disks (including LVM) and network
layers, and for every process (and thread) it shows e.g.
the CPU utilization, memory growth, disk utilization,
priority, username, state, and exit code. In combination
with the optional kernel module netatop, it even shows
network activity per process/thread.

92kB91kBGPL-2.0-or-laterToni UhligBug reportsSources
base-systemattendedsysupgrade-common0.3-1libc, rpcd, rpcd-mod-rpcsysCommon needed files for attendedsysupgrade tool

Manages dependencies and brings settings used by clients.

UCI options:

* attendedsysupgrade.server.url
URL of compatible upgrade server [1]

* attendedsysupgrade.client.upgrade_packages
Client should request image also if no new release but new packages
upgrade are available.

* attendedsysupgrade.client.advanced_mode
Offer advanced options like editing packages before request and show
additional information.

* attendedsysupgrade.client.auto_search
Tells the client to automattically search for upgrades

[1]: https://github.com/aparcar/asu

1kB0kBGPL-2.0Paul SpoorenBug reportsSources
utilities---filesystemattr2.4.48-2libc, libattrExtended attributes support
This package provides xattr manipulation utilities
- attr
- getfattr
- setfattr

13kB12kBGPL-2.0-or-laterMaxim StorchakBug reportsSources
base-systemauc0.3.1-1libc, attendedsysupgrade-common, libblobmsg-json20210516, libubox20210516, libubus20210630, libuci20130104, libuclient20201210, rpcd-mod-rpcsysCLI client for attended-sysupgrade

14kB13kBGPL-3.0common packages maintainersBug reportsSources
utilitiesaudit2.8.5-6libc, libaudit, libauparse, audit-utils, libevThe audit package contains the user space utilities for
storing and searching the audit records generated by
the audit subsystem in the Linux 2.6 kernel
This package contains the audit daemon.

44kB43kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiesaudit-utils2.8.5-6libc, librt, libpthread, libaudit, libauparseThe audit package contains the user space utilities for
storing and searching the audit records generated by
the audit subsystem in the Linux 2.6 kernel
This package contains the audit utilities.

131kB131kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiesaugeas1.12.0-3libc, libxml2, libreadline8, libncurses6Augeas is a configuration editing tool.
It parses configuration files in their
native formats and transforms them into a tree.
Configuration changes are made by manipulating this
tree and saving it back into native config files.

581kB582kBLGPL-2.1-or-laterJan PavlinecBug reportsSources
 
  • Last modified: 2023/03/15 13:34
  • by 127.0.0.1