Package table 21.02
Package categories
Clicking on a package category filters the Table of Packages below accordingly, but you can of course filter it manually by yourself.
Table of packages
The table below shows 50 packages per page due to performance reasons.
- Click on “next page” or “previous page” links in the bottom left to show next or previous 50 packages.
- Columns can be sorted by clicking on the column header.
- Enter your filter criteria in the
white fields.
If you click on a package's name in the table below, you will be brought to the package's own page with its documentation; if there is none, feel free to add it.
| Category | Name | Version | Dependencies | ...........................................Description........................................... | File size | Installed size | License | Maintainer | Bug report | Source code |
|---|---|---|---|---|---|---|---|---|---|---|
| network | 464xlat | 12 | libc, kmod-nat46, ip | 464xlat provides support to deploy limited IPv4 access services to mobile and wireline IPv6-only edge networks without encapsulation (RFC6877) | 5kB | 4kB | GPL-2.0 | Hans Dedecker | Bug reports | Sources |
| network | 6in4 | 26 | libc, kmod-sit, uclient-fetch | Provides support for 6in4 tunnels in /etc/config/network. Refer to http://wiki.openwrt.org/doc/uci/network for configuration details. | 2kB | 1kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | 6rd | 10 | libc, librt, libpthread, kmod-sit | Provides support for 6rd tunnels in /etc/config/network. Refer to http://wiki.openwrt.org/doc/uci/network for configuration details. | 4kB | 3kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | 6to4 | 13 | libc, librt, libpthread, kmod-sit | Provides support for 6to4 tunnels in /etc/config/network. Refer to https://openwrt.org/docs/guide-user/base-system/basic-networking configuration details. | 1kB | 1kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | udpspeeder | 20210116.0-2 | libc, libstdcpp6, librt, libatomic1 | A Tunnel which Improves your Network Quality on a High-latency Lossy Link by using Forward Error Correction,for All Traffics(TCP/UDP/ICMP) | 76kB | 75kB | MIT | Nishant Sharma | Bug reports | Sources |
| utilities---filesystem | acl | 2.2.53-1 | libc, librt, libpthread, libacl | Access control list support This package provides ACL manipulation utilities - chacl - getfacl - setfacl | 19kB | 18kB | LGPL-2.1 GPL-2.0 | Maxim Storchak | Bug reports | Sources |
| network | acme | 3.0.1-1 | libc, wget-ssl, ca-bundle, openssl-util, socat | A client for issuing Letsencrypt certificates. | 50kB | 49kB | GPL-3.0-only | Toke Høiland-Jørgensen | Bug reports | Sources |
| network | acme-dnsapi | 3.0.1-1 | libc, librt, libpthread, acme | This package provides DNS API integration for ACME (Letsencrypt) client. | 130kB | 129kB | GPL-3.0-only | Toke Høiland-Jørgensen | Bug reports | Sources |
| utilities | acpica-unix | 20181213-1 | libc | Open Source utilities for ACPI including the ACPICA Machine Language (AML) interpreter, a simulator, test suites, and a compiler to translate ACPI Source Language (ASL) into AML. At this time, only acpidump is bundled; more might be added later. | 18kB | 17kB | GPL-2.0 | Philip Prindeville | Bug reports | Sources |
| utilities | acpid | 2.0.32-3 | libc, kmod-input-evdev | The ACPI Daemon (acpid) With Netlink Support | 22kB | 21kB | GPL-2.0-or-later | Thomas Heil | Bug reports | Sources |
| libraries | acsccid | 1.1.8-1 | libc, libusb-1.0-0, libpcsclite | PCSC driver for ACS USB CCID (Chip/Smart Card Interface Devices) smart card readers and ICCD (Integrated Circuit(s) Card Devices). | 49kB | 48kB | LGPL-2.1-or-later | Vincent JARDIN | Bug reports | Sources |
| utilities | adb | android.5.0.2_r1-3 | libc, librt, libpthread, zlib, libopenssl1.1 | Android Debug Bridge (adb) is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device. | 52kB | 52kB | Henryk Heisig | Bug reports | Sources | |
| network---wwan | adb-enablemodem | 2017-03-05-1 | libc, adb | Enable modem via adb | 1kB | 0kB | OpenWrt team | Bug reports | Sources | |
| network | adblock | 4.1.3-9 | libc, librt, libpthread, jshn, jsonfilter, coreutils, coreutils-sort, ca-bundle, opkg | Powerful adblock script to block ad/abuse domains via dnsmasq, unbound, named or kresd. The script supports many domain blacklist sites plus manual black- and whitelist overrides. Please see https://github.com/openwrt/packages/blob/master/net/adblock/files/README.md for further information. | 20kB | 19kB | GPL-3.0-or-later | Dirk Brenken | Bug reports | Sources |
| network | addrwatch | 1.0.2-3 | libc, libpcap1, libevent2-7 | This is a tool similar to arpwatch. It main purpose is to monitor network and log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6 addresses of hosts using IPv6 privacy extensions (RFC4941). This contains the main addrwatch program. | 24kB | 23kB | GPL-3.0-or-later | Ondrej Caletka | Bug reports | Sources |
| network | addrwatch-mysql | 1.0.2-3 | libc, addrwatch, libmariadb3 | This is a tool similar to arpwatch. It main purpose is to monitor network and log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6 addresses of hosts using IPv6 privacy extensions (RFC4941). This contains the MySQL output module. | 18kB | 17kB | GPL-3.0-or-later | Ondrej Caletka | Bug reports | Sources |
| network | addrwatch-stdout | 1.0.2-3 | libc, addrwatch | This is a tool similar to arpwatch. It main purpose is to monitor network and log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6 addresses of hosts using IPv6 privacy extensions (RFC4941). This contains the stdout output module. | 3kB | 2kB | GPL-3.0-or-later | Ondrej Caletka | Bug reports | Sources |
| network | addrwatch-syslog | 1.0.2-3 | libc, librt, libpthread, addrwatch | This is a tool similar to arpwatch. It main purpose is to monitor network and log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6 addresses of hosts using IPv6 privacy extensions (RFC4941). This contains the syslog output module. | 3kB | 2kB | GPL-3.0-or-later | Ondrej Caletka | Bug reports | Sources |
| network | adguardhome | 0.107.21-1 | libc, ca-bundle | Free and open source, powerful network-wide ads and trackers blocking DNS server. | 10843kB | 10863kB | GPL-3.0-only | Dobroslaw Kijowski | Bug reports | Sources |
| utilities---filesystem | afuse | 0.4.1-1 | libc, librt, libpthread, libfuse1, fuse-utils | Automounting file system implemented in user-space using FUSE. It implements the most basic functionality that can be expected by an automounter; that is it manages a directory of virtual directories. If one of these virtual directories is accessed and is not already automounted, afuse will attempt to mount a filesystem onto that directory. If the mount succeeds the requested access proceeds as normal, otherwise it will fail with an error. | 12kB | 11kB | GPL-2.0-or-later | Michal Hrusecky | Bug reports | Sources |
| utilities---terminal | agetty | 2.36.1-2 | libc, librt | agetty opens a tty port, prompts for a login name and invokes the /bin/login command | 22kB | 21kB | GPL-2.0 | OpenWrt team | Bug reports | Sources |
| network---ip-addresses-and-names | aggregate | 1.6-2 | libc | takes a list of prefixes in conventional format on stdin, and performs two optimisations to reduce the length of the prefix list. It removes any supplied prefixes which are supurfluous because they are already included in another supplied prefix (e.g., 203.97.2.0/24 would be removed if 203.97.0.0/17 was also supplied), and identifies adjacent prefixes that can be combined under a single, shorter-length prefix (e.g., 203.97.2.0/24 and 203.97.3.0/24 can be combined into the single prefix 203.97.2.0/23). | 4kB | 3kB | ISC | Nikil Mehta | Bug reports | Sources |
| network | ahcpd | 0.53-3 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 23kB | 22kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| firmware | aircard-pcmcia-firmware | 20211216-1 | libc | Sierra Wireless Aircard 555/7xx/8×0 firmware | 1kB | 0kB | Felix Fietkau | Bug reports | Sources | |
| network---wireless | aircrack-ng | 1.6-1 | libc, libpcap1, libpcre, libpthread, uclibcxx, libopenssl1.1, libnl-core200, libnl-genl200, zlib | WLAN tools for breaking 802.11 WEP/WPA keys | 447kB | 448kB | GPL-2.0-or-later | Rick Farina | Bug reports | Sources |
| network---wireless | airmon-ng | 1.6-1 | libc, librt, libpthread, wireless-tools, ethtool, procps-ng | Bash script designed to turn wireless cards into monitor mode. | 13kB | 13kB | GPL-2.0-or-later | Rick Farina | Bug reports | Sources |
| utilities | airos-dfs-reset | 1-1 | dropbear, libc | Companion app for Ubiquity AirOS Gear to enforce fallback to original frequency after DFS event is over. It works by soft-rebooting if running-frequency doesnt match the configured frequency. | 2kB | 1kB | GPL-2.0-only | Simon Polack | Bug reports | Sources |
| network | alfred | 2021.1-3 | libc, librt, libpthread, libnl-tiny1 | alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. | 23kB | 21kB | GPL-2.0-only MIT | Simon Wunderlich | Bug reports | Sources |
| alpine | 2.24-2 | libc, librt, libpthread, libopenssl1.1, libncurses6, libpam | Alpine (Alternatively Licensed Program for Internet News and Email) is a free software email client developed at the University of Washington. It is suitable for both the inexperienced email user as well as for the most demanding power user. This package is built with OpenSSL support. | 1667kB | 1666kB | Apache-2.0 | Antti Seppälä | Bug reports | Sources | |
| utilities | alpine-keys | 2.12.2-1 | libc, apk | Alpine apk public signing keys | 1kB | 1kB | GPL-2.0-only | Paul Spooren | Bug reports | Sources |
| utilities | alpine-repositories | 2.12.2-1 | libc, apk | Official Alpine repositories | 0kB | 0kB | GPL-2.0-only | Paul Spooren | Bug reports | Sources |
| libraries | alsa-lib | 1.2.4-1 | libc, kmod-sound-core, libpthread, librt | This is the library package for alsa, needed by some userspace programs. You must have enabled the ALSA support in the kernel. | 392kB | 393kB | LGPL-2.1-or-later | Ted Hess, Peter Wagner, | Bug reports | Sources |
| libraries---sound | alsa-ucm-conf | 1.2.4-1 | libc | This is a set of configuration files needed for some ALS utilities like alsactl. | 26kB | 25kB | BSD-3-Clause | common packages maintainers | Bug reports | Sources |
| sound | alsa-utils | 1.2.4-1 | libc, librt, libpthread, alsa-lib, alsa-ucm-conf, libncursesw6 | ALSA (Advanced Linux Sound Architecture) utilities | 117kB | 129kB | GPL-2.0-or-later | Ted Hess | Bug reports | Sources |
| sound | alsa-utils-seq | 1.2.4-1 | libc, alsa-lib, libpthread | ALSA sequencer utilities | 68kB | 69kB | GPL-2.0-or-later | Ted Hess | Bug reports | Sources |
| sound | alsa-utils-tests | 1.2.4-1 | libc, librt, libpthread, alsa-lib | ALSA utilities test data (adds ~1.3M to image) | 875kB | 874kB | GPL-2.0-or-later | Ted Hess | Bug reports | Sources |
| extra-packages | amd64-microcode | 20191218-1 | libc | AMD64 CPU microcode | 20kB | 20kB | OpenWrt team | Bug reports | Sources | |
| firmware | amdgpu-firmware | 20211216-1 | libc, librt, libpthread | AMDGPU Video Driver firmware | 19419kB | 19579kB | Felix Fietkau | Bug reports | Sources | |
| network---ip-addresses-and-names | announce | 1.0.1-1 | libc, libpthread | Announce services on the network with Zeroconf/Bonjour. This announces services such as ssh, sftp, and http running on the local machine to the network. | 10kB | 10kB | BSD-3-Clause | Simon Peter | Bug reports | Sources |
| utilities---filesystem | antfs-mount | 1 | libc, kmod-fs-antfs | NTFS mount script for AVM NTFS driver | 0kB | 0kB | common packages maintainers | Bug reports | Sources | |
| utilities | ap51-flash | 2019.0.1-2 | libc | A tool for flashing (nearly) all ap51/ap61 based routers | 17kB | 16kB | GPL-3.0-or-later CC0-1.0 | Russell Senior | Bug reports | Sources |
| network---web-servers-proxies | apache | 2.4.52-1 | libc, libapr, libaprutil, libpcre | The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. This package contains the Apache web server and utility programs. | 758kB | 761kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| network---web-servers-proxies | apache-ab | 2.4.52-1 | libc, apache, libopenssl1.1 | The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. Apache server benchmarking utility. | 19kB | 18kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| network---web-servers-proxies | apache-error | 2.4.52-1 | libc, apache | The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. Apache multi language custom error documents. | 39kB | 38kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| network---web-servers-proxies | apache-icons | 2.4.52-1 | libc, apache | The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. This package contains the icons from Apache. | 137kB | 137kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| network---web-servers-proxies | apache-mod-deflate | 2.4.52-1 | libc, apache, zlib | Deflate support for the Apache HTTP server. | 11kB | 10kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| network---web-servers-proxies | apache-mod-http2 | 2.4.52-1 | libc, apache, libnghttp2-14, libopenssl1.1 | HTTP/2 transport layer for the Apache HTTP Server. | 90kB | 89kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| network---web-servers-proxies | apache-mod-ldap | 2.4.52-1 | libc, apache, libaprutil-ldap | LDAP authentication/authorization module for the Apache HTTP Server. | 40kB | 39kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| network---web-servers-proxies | apache-mod-lua | 2.4.52-1 | libc, apache, liblua5.1.5 | Lua support for the Apache HTTP server. | 43kB | 42kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| network---web-servers-proxies | apache-mod-md | 2.4.52-1 | libc, apache, libcurl4, jansson4, libopenssl1.1 | Managed Domain handling. | 126kB | 126kB | Apache-2.0 | Thomas Heil | Bug reports | Sources |
| Next page | ||||||||||