V11ST-FE

V11ST-FE

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

Ralink's V11ST-FE is a RT2880F evaluation board including a 5-port IC+ IP175C Ethernet switch and on-board Ralink RT2820 radio. It exposes a JTAG and an UART header between the CPU and the Radio chips.

Supported Versions

Hardware Highlights

Installation

→ Install OpenWrt (generic explanation)

Please add the installation procedure here.

Hardware

Serial port

Serial console is on the 2×5 pin header with the following pinout:

RT2880                          Wi-Fi
        [TX] [VCC]
        []   []
        []   []
        [RX] [GND]

Serials console baudrate is : 57600,8n1

Table of Contents