Cubietruck

U-Boot 2013.10-rc2 (Feb 01 2014 - 13:07:47) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: Cubietruck I2C: ready DRAM: 2 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 0 reading uEnv.txt 240 bytes read in 3 ms (78.1 KiB/s) Loaded environment from uEnv.txt Running uenvcmd ... reading uImage 2307464 bytes read in 115 ms (19.1 MiB/s) reading dtb 14308 bytes read in 5 ms (2.7 MiB/s) ## Booting kernel from Legacy Image at 46000000 ... Image Name: ARM OpenWrt Linux-3.12.5 Created: 2014-02-01 14:07:55 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2307400 Bytes = 2.2 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 49000000 Booting using the fdt blob at 0x49000000 Loading Kernel Image ... OK Using Device Tree in place at 49000000, end 490067e3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.12.5 (zalan@zlaptop) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39315) ) #1 SMP PREEMPT Sat Feb 1 15:07:15 CET 2014 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Allwinner A1X (Device Tree), model: Cubietech Cubietruck [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1504000 s7104 r8192 d13376 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2074764K/2097152K available (3199K kernel code, 151K rwdata, 912K rodata, 166K init, 600K bss, 22388K reserved, 1318912K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc040bf2c (4112 kB) [ 0.000000] .init : 0xc040c000 - 0xc0435bc0 ( 167 kB) [ 0.000000] .data : 0xc0436000 - 0xc045bfb8 ( 152 kB) [ 0.000000] .bss : 0xc045bfb8 - 0xc04f21f4 ( 601 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000202] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448) [ 0.059916] pid_max: default: 32768 minimum: 301 [ 0.060103] Mount-cache hash table entries: 512 [ 0.060942] CPU: Testing write buffer coherency: ok [ 0.061273] /cpus/cpu@0 missing clock-frequency property [ 0.061292] /cpus/cpu@1 missing clock-frequency property [ 0.061305] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.061341] Setting up static identity map for 0xc0011510 - 0xc0011544 [ 0.120172] CPU1: failed to boot: -38 [ 0.120198] Brought up 1 CPUs [ 0.120205] SMP: Total of 1 processors activated. [ 0.120212] CPU: All CPU(s) started in SVC mode. [ 0.124741] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.125044] pinctrl core: initialized pinctrl subsystem [ 0.125408] regulator-dummy: no parameters [ 0.125719] NET: Registered protocol family 16 [ 0.126018] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.131760] bio: create slab <bio-0> at 0 [ 0.132283] reg-fixed-voltage ahci-5v.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe [ 0.132309] platform ahci-5v.3: Driver reg-fixed-voltage requests probe deferral [ 0.132337] reg-fixed-voltage usb1-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.132352] platform usb1-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.132373] reg-fixed-voltage usb2-vbus.5: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.132387] platform usb2-vbus.5: Driver reg-fixed-voltage requests probe deferral [ 0.132764] SCSI subsystem initialized [ 0.133207] usbcore: registered new interface driver usbfs [ 0.133275] usbcore: registered new interface driver hub [ 0.133402] usbcore: registered new device driver usb [ 0.134249] Switched to clocksource hstimer [ 0.139652] NET: Registered protocol family 2 [ 0.140585] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.140721] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.140843] TCP: Hash tables configured (established 8192 bind 8192) [ 0.140924] TCP: reno registered [ 0.140943] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.141003] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.141350] NET: Registered protocol family 1 [ 0.142523] audit: initializing netlink socket (disabled) [ 0.142576] type=2000 audit(0.130:1): initialized [ 0.143382] bounce pool size: 64 pages [ 0.149689] VFS: Disk quotas dquot_6.5.2 [ 0.149944] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.151530] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.151565] msgmni has been set to 1476 [ 0.152389] io scheduler noop registered [ 0.152403] io scheduler deadline registered [ 0.152438] io scheduler cfq registered (default) [ 0.154772] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.188379] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.210392] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.702382] console [ttyS0] enabled [ 0.706557] sun4i-mdio 1c0b080.mdio: no regulator found [ 0.711869] libphy: sun4i_mii_bus: probed [ 0.754899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.761465] ehci-platform: EHCI generic platform driver [ 0.766841] sunxi-ehci: Allwinner sunXi EHCI driver [ 0.771827] platform 1c14000.ehci0: Driver sunxi-ehci requests probe deferral [ 0.779078] platform 1c1c000.ehci1: Driver sunxi-ehci requests probe deferral [ 0.786355] usbcore: registered new interface driver usb-storage [ 0.792546] mousedev: PS/2 mouse device common for all mice [ 0.799343] sunxi-mci 1c0f000.sdc: base:0xf0098000 irq:64 [ 0.806005] TCP: cubic registered [ 0.809325] Initializing XFRM netlink socket [ 0.813618] NET: Registered protocol family 17 [ 0.818229] 8021q: 802.1Q VLAN Support v1.8 [ 0.822529] Registering SWP/SWPB emulation handler [ 0.827870] registered taskstats version 1 [ 0.832581] ahci-5v: 5000 mV [ 0.835993] usb1-vbus: 5000 mV [ 0.839422] usb2-vbus: 5000 mV [ 0.842827] sunxi-ehci 1c14000.ehci0: EHCI Host Controller [ 0.848440] sunxi-ehci 1c14000.ehci0: new USB bus registered, assigned bus number 1 [ 0.856321] sunxi-ehci 1c14000.ehci0: irq 71, io mem 0x01c14000 [ 0.874266] sunxi-ehci 1c14000.ehci0: USB 2.0 started, EHCI 1.00 [ 0.880539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.887370] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.894600] usb usb1: Product: EHCI Host Controller [ 0.899474] usb usb1: Manufacturer: Linux 3.12.5 ehci_hcd [ 0.904905] usb usb1: SerialNumber: 1c14000.ehci0 [ 0.910161] hub 1-0:1.0: USB hub found [ 0.913992] hub 1-0:1.0: 1 port detected [ 0.918567] sunxi-ehci 1c1c000.ehci1: EHCI Host Controller [ 0.924074] sunxi-ehci 1c1c000.ehci1: new USB bus registered, assigned bus number 2 [ 0.931923] sunxi-ehci 1c1c000.ehci1: irq 72, io mem 0x01c1c000 [ 0.954276] sunxi-ehci 1c1c000.ehci1: USB 2.0 started, EHCI 1.00 [ 0.960528] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.968358] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.976619] usb usb2: Product: EHCI Host Controller [ 0.981494] usb usb2: Manufacturer: Linux 3.12.5 ehci_hcd [ 0.986905] usb usb2: SerialNumber: 1c1c000.ehci1 [ 0.992104] hub 2-0:1.0: USB hub found [ 0.995917] hub 2-0:1.0: 1 port detected [ 1.000229] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.007376] Waiting for root device /dev/mmcblk0p2... [ 1.362837] mmc0: new SD card at address 8f42 [ 1.367710] mmcblk0: mmc0:8f42 SU02G 1.84 GiB [ 1.373791] mmcblk0: p1 p2 [ 1.445348] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.454369] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.466616] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 1.474523] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.481521] Freeing unused kernel memory: 164K (c040c000 - c0435000) procd: Console is alive procd: - preinit - probing /dev/mmcblk0 for uboot env data Detected generic sunxi // generic sunxi Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 2.036539] ahci sunxi-ahci: controller can't do PMP, turning off CAP_PMP [ 2.043337] ahci sunxi-ahci: forcing PORTS_IMPL to 0x1 [ 2.048594] ahci sunxi-ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.056902] ahci sunxi-ahci: flags: ncq sntf pm led clo only pio slum part ccc [ 2.065264] scsi0 : ahci_platform [ 2.069056] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 2.424265] ata1: SATA link down (SStatus 0 SControl 300) [ 2.446486] sdhci: Secure Digital Host Controller Interface driver [ 2.452669] sdhci: Copyright(c) Pierre Ossman [ 2.457814] sdhci-pltfm: SDHCI platform and OF driver helper mount_root[ 4.988492] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended : mounting /dev/root [ 5.001490] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) procd: - early - procd: - ubus - procd: - init - Please press Enter to activate this console. [ 8.616338] NET: Registered protocol family 10 [ 8.626573] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 8.646229] tun: Universal TUN/TAP device driver, 1.6 [ 8.651289] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 8.676432] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.691228] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.734998] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 8.741796] sunxi-rtc 1c20d00.rtc: RTC enabled [ 8.769429] u32 classifier [ 8.772147] input device check on [ 8.778855] Actions configured [ 8.783723] Mirror/redirect action on [ 8.804800] Loading modules backported from Linux version master-2014-01-23-0-g62c147d [ 8.812720] Backport generated by backports.git backports-20140124-0-g1256d3e [ 8.822215] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.889169] sun4i-emac 1c0b000.ethernet: using random MAC address de:de:06:01:cc:6f [ 8.900369] sun4i-emac 1c0b000.ethernet: eth0: at f0238000, IRQ 87 MAC: de:de:06:01:cc:6f [ 8.960509] xt_time: kernel timezone is -0000 [ 8.973345] cfg80211: Calling CRDA to update world regulatory domain [ 8.986026] cfg80211: World regulatory domain updated: [ 8.991184] cfg80211: DFS Master region: unset [ 9.023251] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.031753] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.039546] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.047317] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.055078] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm) [ 9.062811] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm) [ 9.070606] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 9.082837] PPP generic driver version 2.4.2 [ 9.088788] NET: Registered protocol family 24 [ 9.099451] usbcore: registered new interface driver rt73usb [ 9.107405] usbcore: registered new interface driver rtl8187 [ 9.121200] usbcore: registered new interface driver rt2500usb [ 9.131837] usbcore: registered new interface driver rt2800usb [ 9.141696] usbcore: registered new interface driver rtl8192cu [ 11.644644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready BusyBox v1.19.4 (2014-02-01 13:12:56 CET) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r39440) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/#