Buffalo WHR-600D

1. Compile initramfs image or link https://downloads.openwrt.org/releases/19.07.3/targets/ramips/mt7620/openwrt-19.07.3-ramips-mt7620-whr-600d-initramfs-kernel.bin
2. Rename initramfs image to firmware_WHR-600D.ram
3. Setup tftp server at 192.168.11.168
4. While plugging it in, hold down the AOSS button until you see it grab the image
5. Load initramfs image via tftp
6. open 192.168.1.1 openwrt LuCi
7. Backup the stock FW
8. Sysupgrade with a sysupgrade image for a permanent install
9. NOTE: While the 5.0Ghz interface will show on the version 23.05.4 interface, enabling it will send the router into a bootloop

How to add tags