This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='utilities'

类别名称 版本依赖包描述信息软件包体积安装后大小授权方式维护人报告错误源代码
utilitiescmdpad0.0.3-3libccmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

7kB6kBMITTed HessBug reportsSources
utilitiescmdpad0.0.3-4libc, libsspcmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

7kB6kBMITTed HessBug reportsSources
utilitiescmdpad0.0.3-5libc, libsspcmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

7kB6kBMITTed HessBug reportsSources
utilitiescmdpad0.0.3-5libccmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

8kB7kBMITTed HessBug reportsSources
utilitiescmdpad0.0.3-6libccmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

8kB7kBMITTed HessBug reportsSources
utilitiescmdpad0.0.3-6libcpackages:pkgdata:cmdpad, cmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

8kB7kBMITTed Hesspackages:pkgdata:cmdpad, Bug reportspackages:pkgdata:cmdpad, Sources
utilitiesgpioctl-sysfs0.0.6-1libc, libssp, libugpioTool for controlling gpio pins using the sysfs api provided by the kernel.

2kB1kBLGPL-2.1+Michael HeimpoldBug reportsSources
utilitiesgpioctl-sysfs0.0.6-1libc, libugpioTool for controlling gpio pins using the sysfs api provided by the kernel.

2kB1kBLGPL-2.1+Michael HeimpoldBug reportsSources
utilitiesgpioctl-sysfs0.0.6-2libc, libssp, libugpioTool for controlling gpio pins using the sysfs api provided by the kernel.

2kB1kBLGPL-2.1-or-laterMichael HeimpoldBug reportsSources
utilitiesgpioctl-sysfs0.0.7-1libc, libugpioTool for controlling gpio pins using the sysfs api provided by the kernel.

2kB1kBLGPL-2.1-or-laterMichael HeimpoldBug reportsSources
utilitiesgpioctl-sysfs0.0.7-1libc, librt, libpthread, libugpioTool for controlling gpio pins using the sysfs api provided by the kernel.

3kB2kBLGPL-2.1-or-laterMichael HeimpoldBug reportsSources
utilitiesgpioctl-sysfs0.0.7-1libc, libugpiopackages:pkgdata:gpioctl-sysfs, Tool for controlling gpio pins using the sysfs api provided by the kernel.

2kB1kBLGPL-2.1-or-laterMichael Heimpoldpackages:pkgdata:gpioctl-sysfs, Bug reportspackages:pkgdata:gpioctl-sysfs, Sources
utilitiesbottlerocket0.04c-1libcBottleRocket is an interface to the X10 FireCracker home automation kit.

7kB6kBLGPL-2.1-onlyBrian NorrisBug reportsSources
utilitiesbottlerocket0.04c-1libcBottleRocket is an interface to the X10 FireCracker home automation kit.

7kB7kBLGPL-2.1-onlyBrian NorrisBug reportsSources
utilitiesbmx7-dnsupdate0.1-2libc, libssp, bmx7, bmx7-json, inotifywait, jshnbmx7-dnsupdate

1kB0kBPaul SpoorenBug reportsSources
utilitiesbmx7-dnsupdate0.1-2libc, libssp, bmx7, bmx7-json, inotifywait, jshnbmx7-dnsupdate

1kB0kBPaul SpoorenBug reportsSources
utilitiesbmx7-dnsupdate0.1-2libc, bmx7, bmx7-json, inotifywait, jshnbmx7-dnsupdate

1kB0kBPaul SpoorenBug reportsSources
utilitiesrelayctl0.1-3libc, libssp, libftdi1Simple command-line control of SainSmart USB relay boards based on
FTDI chips using bitbang mode.

3kB2kBBSD-3-ClauseHeinrich SchuchardtBug reportsSources
utilitiesbmx7-dnsupdate0.1-3libc, librt, libpthread, bmx7, bmx7-json, inotifywait, jshnbmx7-dnsupdate

1kB0kBPaul SpoorenBug reportsSources
utilitiesrelayctl0.1-3libc, libftdi1Simple command-line control of SainSmart USB relay boards based on
FTDI chips using bitbang mode.

3kB2kBBSD-3-ClauseHeinrich SchuchardtBug reportsSources
utilitiesrelayctl0.1-3libc, libssp, libftdi1Simple command-line control of SainSmart USB relay boards based on
FTDI chips using bitbang mode.

3kB2kBBSD-3-ClauseHeinrich SchuchardtBug reportsSources
utilitiesrelayctl0.1-3libc, libssp, libftdi1Simple command-line control of SainSmart USB relay boards based on
FTDI chips using bitbang mode.

3kB2kBBSD-3-ClauseHeinrich SchuchardtBug reportsSources
utilitiesrelayctl0.1-3libc, librt, libpthread, libftdi1Simple command-line control of SainSmart USB relay boards based on
FTDI chips using bitbang mode.

3kB3kBBSD-3-ClauseHeinrich SchuchardtBug reportsSources
utilitiesrelayctl0.1-3libc, libftdi1packages:pkgdata:relayctl, Simple command-line control of SainSmart USB relay boards based on
FTDI chips using bitbang mode.

3kB2kBBSD-3-ClauseHeinrich Schuchardtpackages:pkgdata:relayctl, Bug reportspackages:pkgdata:relayctl, Sources
utilitiesbmx7-dnsupdate0.1-3libc, librt, libpthread, bmx7, bmx7-json, inotifywait, jshnpackages:pkgdata:bmx7-dnsupdate, bmx7-dnsupdate

1kB0kBPaul Spoorenpackages:pkgdata:bmx7-dnsupdate, Bug reportspackages:pkgdata:bmx7-dnsupdate, Sources
utilitiesshinit0.1.0-1libcThis package adds support for /etc/shinit and ~/.shinit files, which
contain commands to be run at the start of all interactive shells.
(/etc/profile and ~/.profile are read for login shells only.)

This is useful for those who regularly open non-login, interactive
shells, for example users of GNU Screen or tmux.

1kB0kBGPL-2.0-onlyJeffery ToBug reportsSources
utilitiescatatonit0.1.7-1libcThis is a rewrite of initrs in C, because we found that it is not
possible to statically compile Rust binaries without using musl.
That was, in turn, a reimplementation of other container inits like
tini and dumb-init.

26kB25kBGPL-3.0-or-laterOskari RautaBug reportsSources
utilitiescatatonit0.1.7-1libcpackages:pkgdata:catatonit, This is a rewrite of initrs in C, because we found that it is not
possible to statically compile Rust binaries without using musl.
That was, in turn, a reimplementation of other container inits like
tini and dumb-init.

26kB25kBGPL-3.0-or-laterOskari Rautapackages:pkgdata:catatonit, Bug reportspackages:pkgdata:catatonit, Sources
utilitiesopus-tools0.1.9-1libc, libssp, libogg, libopusThis package provides command-line utilities to encode, inspect, and decode
.opus files.

58kB58kBBSD-2-ClauseNicolas ThillBug reportsSources
utilitiesdfu-util0.10-1libc, librt, libpthread, libusb-1.0-0dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1
specifications of the USB forum. DFU is intended to download and
upload firmware to/from devices connected over USB.

20kB19kBGPL-2.0-or-laterBruno RandolfBug reportsSources
utilitiescrelay0.10.1-1libc, libftdi1, hidapi, libusb-1.0crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

13kB12kBGPL-2.0Ted HessBug reportsSources
utilitiescrelay0.10.1-1libc, libftdi1, hidapi, libusb-1.0crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

13kB12kBGPL-2.0Ted HessBug reportsSources
utilitiescrelay0.10.1-1libc, libftdi1, hidapi, libusb-1.0packages:pkgdata_owrt18_6:crelay, crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

13kB12kBGPL-2.0Ted Hesspackages:pkgdata_owrt18_6:crelay, Bug reportspackages:pkgdata_owrt18_6:crelay, Sources
utilitiesdfu-util0.11-1libc, libusb-1.0-0dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1
specifications of the USB forum. DFU is intended to download and
upload firmware to/from devices connected over USB.

21kB20kBGPL-2.0-or-laterBruno RandolfBug reportsSources
utilitiesdfu-util0.11-1libc, libusb-1.0-0packages:pkgdata:dfu-util, dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1
specifications of the USB forum. DFU is intended to download and
upload firmware to/from devices connected over USB.

21kB20kBGPL-2.0-or-laterBruno Randolfpackages:pkgdata:dfu-util, Bug reportspackages:pkgdata:dfu-util, Sources
utilitiesstress-ng0.12.10-1libc, librt, libpthread, zlib, libbsd0, libaio, libsctpstress-ng will stress test a computer system in various selectable ways. It
was designed to exercise various physical subsystems of a computer as well as
the various operating system kernel interfaces.

420kB420kBGPL-2.0-onlyAlexandru ArdeleanBug reportsSources
utilitieslrzsz0.12.20-1libc, libsspTransfer files in your login sessions.
Very leightweight and straight forward.
You just need a terminal client that can do
either X, Y or Z-modem file transfers.

45kB45kBGPL-2.0+Hsing-Wang LiaoBug reportsSources
utilitieslrzsz0.12.20-1libc, libsspTransfer files in your login sessions.
Very leightweight and straight forward.
You just need a terminal client that can do
either X, Y or Z-modem file transfers.

46kB46kBGPL-2.0+Hsing-Wang LiaoBug reportsSources
utilitieslrzsz0.12.20-2libc, libsspTransfer files in your login sessions.
Very leightweight and straight forward.
You just need a terminal client that can do
either X, Y or Z-modem file transfers.

47kB47kBGPL-2.0-or-laterHsing-Wang LiaoBug reportsSources
utilitieslrzsz0.12.20-2libc, librt, libpthreadTransfer files in your login sessions.
Very leightweight and straight forward.
You just need a terminal client that can do
either X, Y or Z-modem file transfers.

48kB47kBGPL-2.0-or-laterHsing-Wang LiaoBug reportsSources
utilitieslrzsz0.12.21-1libc, librt, libpthreadlrzsz is a cosmetically modified zmodem/ymodem/xmodem package built
from the public-domain version of Chuck Forsberg's rzsz package.

These programs use error correcting protocols ({z,x,y}modem) to send
(sz, sx, sb) and receive (rz, rx, rb) files over a dial-in serial port
from a variety of programs running under various operating systems.

45kB45kBGPL-2.0-or-laterHsing-Wang LiaoBug reportsSources
utilitiescrelay0.13-1libc, libssp, libftdi1, hidapi, libusb-1.0-0crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

13kB13kBGPL-2.0Ted HessBug reportsSources
utilitiesprogress0.13.1-1libc, libssp, libncurseswThis tool can be described as a Tiny, Dirty, Linux-and-OSX-Only
C command that looks for coreutils basic commands (cp, mv, dd, tar,
gzip/gunzip, cat, etc.) currently running on your system and
displays the percentage of copied data. It can also show estimated
time and throughput, and provide a “top-like” mode (monitoring).
.
It simply scans `/proc` for interesting commands, and then looks at
directories `fd` and `fdinfo` to find opened files and seek positions,
and reports status for the largest file.
.
It's very light, and compatible with virtually any command.
This program was formerly known as 'cv' on github.

8kB7kBGPL-3.0Nikil MehtaBug reportsSources
utilitiesprogress0.14-1libc, libssp, libncursesw6This tool can be described as a Tiny, Dirty, Linux-and-OSX-Only
C command that looks for coreutils basic commands (cp, mv, dd, tar,
gzip/gunzip, cat, etc.) currently running on your system and
displays the percentage of copied data. It can also show estimated
time and throughput, and provide a “top-like” mode (monitoring).
.
It simply scans `/proc` for interesting commands, and then looks at
directories `fd` and `fdinfo` to find opened files and seek positions,
and reports status for the largest file.
.
It's very light, and compatible with virtually any command.
This program was formerly known as 'cv' on github.

9kB8kBGPL-3.0Nikil MehtaBug reportsSources
utilitiescrelay0.14-2libc, libftdi1, hidapi, libusb-1.0-0crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

16kB15kBGPL-3.0-or-laterTed HessBug reportsSources
utilitiesiio-utils0.14-2libc, libiioCommand line tools for IIO devices.

17kB17kBLGPL-2.1Michael HeimpoldBug reportsSources
utilitiescrelay0.14-2libc, librt, libpthread, libftdi1, hidapi, libusb-1.0-0crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

16kB15kBGPL-3.0-or-laterTed HessBug reportsSources
utilitiescrelay0.14-2libc, libftdi1, hidapi, libusb-1.0-0packages:pkgdata:crelay, crelay is used to control different relay cards in a unified manner. It provides
several interfaces for controlling the relays locally or remotely by a web browser
or a smartphone. The card which is detected first will be used. A WebUI control is
available on port 8000 (default)
.
Currently supported relay cards:
- Conrad USB 4-channel relay card
- Sainsmart USB 4/8-channel relay board
- Sainsmart USB 16-channel relay control module
- Generic GPIO relays
- HID API compatible relay card

16kB15kBGPL-3.0-or-laterTed Hesspackages:pkgdata:crelay, Bug reportspackages:pkgdata:crelay, Sources
utilitiesstress-ng0.14.03-3libc, zlib, libbsd0, libaio, libsctp, libkmod, libatomic1, libjpegstress-ng will stress test a computer system in various selectable ways. It
was designed to exercise various physical subsystems of a computer as well as
the various operating system kernel interfaces.

541kB546kBGPL-2.0-onlyAlexandru ArdeleanBug reportsSources
utilitiesyanglint0.14.53-2698bd6484526..f23libc, libyangYANG data modeling language utility

28kB27kBGPL-2.0+Mislav NovakovicBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy