This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='utilities'

类别名称 版本依赖包描述信息软件包体积安装后大小授权方式维护人报告错误源代码
utilitiesprogress0.15-1libc, librt, libpthread, libncursesw6This tool can be described as a Tiny, Dirty, Linux-and-OSX-Only
C command that looks for coreutils basic commands (cp, mv, dd, tar,
gzip/gunzip, cat, etc.) currently running on your system and
displays the percentage of copied data. It can also show estimated
time and throughput, and provide a “top-like” mode (monitoring).
.
It simply scans `/proc` for interesting commands, and then looks at
directories `fd` and `fdinfo` to find opened files and seek positions,
and reports status for the largest file.
.
It's very light, and compatible with virtually any command.
This program was formerly known as 'cv' on github.

10kB8kBGPL-3.0-or-laterNikil MehtaBug reportsSources
utilitiesprogress0.15-1libc, librt, libpthread, libncursesw6This tool can be described as a Tiny, Dirty, Linux-and-OSX-Only
C command that looks for coreutils basic commands (cp, mv, dd, tar,
gzip/gunzip, cat, etc.) currently running on your system and
displays the percentage of copied data. It can also show estimated
time and throughput, and provide a “top-like” mode (monitoring).
.
It simply scans `/proc` for interesting commands, and then looks at
directories `fd` and `fdinfo` to find opened files and seek positions,
and reports status for the largest file.
.
It's very light, and compatible with virtually any command.
This program was formerly known as 'cv' on github.

10kB9kBGPL-3.0-or-laterNikil MehtaBug reportsSources
utilitiesprometheus-statsd-exporter0.15.0-2libcstatsd_exporter receives StatsD-style metrics and exports them as Prometheus
metrics.

3331kB3336kBApache-2.0Andre HeiderBug reportsSources
utilitiesprometheus-statsd-exporter0.15.0-2libcstatsd_exporter receives StatsD-style metrics and exports them as Prometheus
metrics.

3110kB3117kBApache-2.0Andre HeiderBug reportsSources
utilitiesiio-utils0.16-1libc, libssp, libiioCommand line tools for IIO devices.

20kB19kBLGPL-2.1Michael HeimpoldBug reportsSources
utilitiesyanglint0.16-r3-4libc, libssp, libyangYANG data modeling language utility

27kB27kBGPL-2.0-or-laterMislav NovakovicBug reportsSources
utilitiesopensc-utils0.16.0-1libc, libssp, libopenscOpenSC utilities

0kB0kBLGPL-2.1+Daniel GolleBug reportsSources
utilitiesopensc-utils0.17.0-1libc, libssp, libopenscOpenSC utilities

0kB0kBLGPL-2.1+Daniel GolleBug reportsSources
utilitiestini0.19.0-2libcA tiny but valid init process for containers.

37kB36kBMITGerard RyanBug reportsSources
utilitiesopensc-utils0.19.0-2libc, libopenscOpenSC utilities

0kB0kBLGPL-2.1-or-laterDaniel GolleBug reportsSources
utilitiestini0.19.0-2libcA tiny but valid init process for containers.

35kB34kBMITGerard RyanBug reportsSources
utilitiestini0.19.0-2libcpackages:pkgdata:tini, A tiny but valid init process for containers.

37kB36kBMITGerard Ryanpackages:pkgdata:tini, Bug reportspackages:pkgdata:tini, Sources
utilitiesnsutils0.2-2022-05-13-d6570bde-1libc, librt, libpthread, libcapNsutils suite includes a number of utilities to list, add/remove tag, and join namespaces.

15kB14kBGPL-2.0-onlyOskari RautaBug reportsSources
utilitiesuvcdynctrl0.2.4libc, libssp, libwebcamThe webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

19kB18kBRoger DBug reportsSources
utilitiesuvcdynctrl0.2.4libc, libwebcamThe webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

20kB19kBRoger DBug reportsSources
utilitiesuvcdynctrl0.2.5-1libc, libwebcamThe webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

20kB19kBRoger DBug reportsSources
utilitiesuvcdynctrl0.2.5-3libc, librt, libpthread, libxml2The webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

62kB61kBGPL-3.0-or-laterRoger DBug reportsSources
utilitiesuvcdynctrl0.2.5-3libc, libxml2The webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

73kB72kBGPL-3.0-or-laterRoger DBug reportsSources
utilitiesiio-utils0.21-4libc, librt, libpthread, libiioCommand line tools for IIO devices.

42kB41kBLGPL-2.1Michael HeimpoldBug reportsSources
utilitiesiio-utils0.21-4libc, librt, libpthread, libiiopackages:pkgdata:iio-utils, Command line tools for IIO devices.

42kB41kBLGPL-2.1Michael Heimpoldpackages:pkgdata:iio-utils, Bug reportspackages:pkgdata:iio-utils, Sources
utilitiesiio-utils0.21-4libc, libiioCommand line tools for IIO devices.

42kB42kBLGPL-2.1Michael HeimpoldBug reportsSources
utilitiesopensc-utils0.22.0-1libc, libopenscOpenSC utilities

0kB0kBLGPL-2.1-or-laterDaniel GolleBug reportsSources
utilitiesopensc-utils0.22.0-1libc, libopenscOpenSC utilities

0kB0kBLGPL-2.1-or-laterDaniel GolleBug reportsSources
utilitieswipe0.24-1libc, librt, libpthreadwipe is a little command for securely erasing files from magnetic media.

15kB14kBGPL-2.0-onlyToni UhligBug reportsSources
utilitieswipe0.24-1libcwipe is a little command for securely erasing files from magnetic media.

16kB15kBGPL-2.0-onlyToni UhligBug reportsSources
utilitiessumo0.27.1-1libc, libssp, libstdcpp, libxerces-cSUMO is a free and open traffic simulation suite which is available since 2001.
SUMO allows modelling of intermodal traffic systems including road vehicles,
public transport and pedestrians. Included with SUMO is a wealth of supporting
tools which handle tasks such as route finding, visualization, network import
and emission calculation. SUMO can be enhanced with custom models and provides
various APIs to remotely control the simulation.

4329kB4335kBGPL-3.0Álvaro Fernández RojasBug reportsSources
utilitiessumo0.27.1-1libc, libssp, libstdcpp, libxerces-cSUMO is a free and open traffic simulation suite which is available since 2001.
SUMO allows modelling of intermodal traffic systems including road vehicles,
public transport and pedestrians. Included with SUMO is a wealth of supporting
tools which handle tasks such as route finding, visualization, network import
and emission calculation. SUMO can be enhanced with custom models and provides
various APIs to remotely control the simulation.

4323kB4328kBGPL-3.0Álvaro Fernández RojasBug reportsSources
utilitiesrtl-ais0.3-3libc, libpthread, librtlsdrrtl_ais uses a rtl2832u dvb-t dongle to tune AIS (Automatic Identification
System) used on ships and by vessel traffic services

14kB13kBGPL-2.0+Nuno GoncalvesBug reportsSources
utilitiesrtl-ais0.3-4libc, libpthread, librtlsdrrtl_ais uses a rtl2832u dvb-t dongle to tune AIS (Automatic Identification
System) used on ships and by vessel traffic services

16kB15kBGPL-2.0-or-laterNuno GoncalvesBug reportsSources
utilitiesrtl-ais0.3-4libc, librt, libpthread, librtlsdrrtl_ais uses a rtl2832u dvb-t dongle to tune AIS (Automatic Identification
System) used on ships and by vessel traffic services

15kB14kBGPL-2.0-or-laterNuno GoncalvesBug reportsSources
utilitiesrtl-ais0.3-4libc, libpthread, librtlsdrpackages:pkgdata:rtl-ais, rtl_ais uses a rtl2832u dvb-t dongle to tune AIS (Automatic Identification
System) used on ships and by vessel traffic services

16kB15kBGPL-2.0-or-laterNuno Goncalvespackages:pkgdata:rtl-ais, Bug reportspackages:pkgdata:rtl-ais, Sources
utilitiesecdsautils0.3.2.20160630-1libc, libecdsautil, libueccUtilities to sign and verify checksums using ECDSA.

5kB4kBMatthias SchifferBug reportsSources
utilitiesecdsautils0.3.2.20160630-1libc, libssp, libecdsautil, libueccUtilities to sign and verify checksums using ECDSA.

4kB4kBMatthias SchifferBug reportsSources
utilitiesecdsautils0.3.2.20160630-1libc, libssp, libecdsautil, libueccUtilities to sign and verify checksums using ECDSA.

5kB4kBMatthias SchifferBug reportsSources
utilitiestriggerhappy0.3.4-151001-1libctriggerhappy - handle input events and run configured programs
The daemon thd can handle hotplugged input devices and is configured through
simple configuration files in /etc/triggerhappy/triggers.d/.

15kB15kBGPL-3.0+Ted HessBug reportsSources
utilitiespciids0.359-1libcPCI ID list

299kB299kBGPL-2.0-or-later XFree86-1.0common packages maintainersBug reportsSources
utilitiesusbids0.359-1libcUSB ID list

245kB245kBGPL-2.0-or-later XFree86-1.0common packages maintainersBug reportsSources
utilitiespciids0.359-1libcPCI ID list

299kB299kBGPL-2.0-or-later XFree86-1.0common packages maintainersBug reportsSources
utilitiesusbids0.359-1libcUSB ID list

245kB245kBGPL-2.0-or-later XFree86-1.0common packages maintainersBug reportsSources
utilitiesecdsautils0.4.1-1libc, librt, libpthread, libecdsautil, libueccUtilities to sign and verify checksums using ECDSA.

6kB5kBBSD-2-ClauseMatthias SchifferBug reportsSources
utilitiesecdsautils0.4.1-1libc, libecdsautil, libueccUtilities to sign and verify checksums using ECDSA.

6kB5kBBSD-2-ClauseMatthias SchifferBug reportsSources
utilitiesecdsautils0.4.1-1libc, libecdsautil, libueccpackages:pkgdata_owrt21_2:ecdsautils, Utilities to sign and verify checksums using ECDSA.

6kB5kBBSD-2-ClauseMatthias Schifferpackages:pkgdata_owrt21_2:ecdsautils, Bug reportspackages:pkgdata_owrt21_2:ecdsautils, Sources
utilitiesecdsautils0.4.1-1libc, librt, libpthread, libecdsautil, libueccpackages:pkgdata:ecdsautils, Utilities to sign and verify checksums using ECDSA.

6kB5kBBSD-2-ClauseMatthias Schifferpackages:pkgdata:ecdsautils, Bug reportspackages:pkgdata:ecdsautils, Sources
utilitiesnetopeer2-keystored0.4.13libc, libssp, libopenssl, libsysrepo, sysrepo, sysrepocfg, sysrepoctl, openssh-keygen, openssl-utilNetopeer2 key store management

11kB10kBBSD-3-ClauseMislav NovakovicBug reportsSources
utilitiesnetopeer2-keystored0.4.13libc, libopenssl, libsysrepo, sysrepo, sysrepocfg, sysrepoctl, openssh-keygen, openssl-utilNetopeer2 key store management

12kB11kBBSD-3-ClauseMislav NovakovicBug reportsSources
utilitiescgroup-tools0.41-1libc, libssp, libcgroupCGroup config and exec tools

27kB27kBLGPLDaniel DanzbergerBug reportsSources
utilitiescgroup-tools0.41-3libc, librt, libpthread, libcgroupCGroup config and exec tools

30kB29kBLGPL-2.1-or-laterDaniel DanzbergerBug reportsSources
utilitiescgroup-tools0.41-3libc, libcgroupCGroup config and exec tools

30kB30kBLGPL-2.1-or-laterDaniel DanzbergerBug reportsSources
utilitiescgroup-tools0.41-3libc, librt, libpthread, libcgrouppackages:pkgdata:cgroup-tools, CGroup config and exec tools

30kB29kBLGPL-2.1-or-laterDaniel Danzbergerpackages:pkgdata:cgroup-tools, Bug reportspackages:pkgdata:cgroup-tools, Sources
utilitiestriggerhappy0.5.0-1libctriggerhappy - handle input events and run configured programs
The daemon thd can handle hotplugged input devices and is configured through
simple configuration files in /etc/triggerhappy/triggers.d/.

16kB15kBGPL-3.0Ted HessBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy