软件包列表
软件包分类
点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。
软件包列表
为了不影响您的体验,每页只显示50个软件包。
- 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
- 点击表头可对按对应字段对内容进行排序。
- 在
反白框输入您的筛选条件。
当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。
Filtered by categories='network---ip-addresses-and-names'
| 类别 | 名称 | ↓ 版本 | 依赖包 | 描述信息 | 软件包体积 | 安装后大小 | 授权方式 | 维护人 | 报告错误 | 源代码 |
|---|---|---|---|---|---|---|---|---|---|---|
| network---ip-addresses-and-names | aggregate | 1.6-2 | libc | packages:pkgdata:aggregate, takes a list of prefixes in conventional format on stdin, and performs two optimisations to reduce the length of the prefix list. It removes any supplied prefixes which are supurfluous because they are already included in another supplied prefix (e.g., 203.97.2.0/24 would be removed if 203.97.0.0/17 was also supplied), and identifies adjacent prefixes that can be combined under a single, shorter-length prefix (e.g., 203.97.2.0/24 and 203.97.3.0/24 can be combined into the single prefix 203.97.2.0/23). | 4kB | 3kB | ISC | Nikil Mehta | packages:pkgdata:aggregate, Bug reports | packages:pkgdata:aggregate, Sources |
| network---ip-addresses-and-names | overture | 1.6.1-1 | libc | Overture is a DNS server/forwarder/dispatcher written in Go. | 2364kB | 2368kB | MIT | Richard Yu | Bug reports | Sources |
| network---ip-addresses-and-names | drill | 1.6.17-2 | libc, libssp, libopenssl, libldns | drill is a tool to designed to get all sorts of information out of the DNS. It is specificly designed to be used with DNSSEC. | 19kB | 18kB | BSD-3-Clause | Nicolas Thill | Bug reports | Sources |
| network---ip-addresses-and-names | drill | 1.6.17-2 | libc, libopenssl, libldns | drill is a tool to designed to get all sorts of information out of the DNS. It is specificly designed to be used with DNSSEC. | 21kB | 20kB | BSD-3-Clause | Nicolas Thill | Bug reports | Sources |
| network---ip-addresses-and-names | drill | 1.6.17-2 | libc, libopenssl, libldns | packages:pkgdata_owrt18_6:drill, drill is a tool to designed to get all sorts of information out of the DNS. It is specificly designed to be used with DNSSEC. | 21kB | 20kB | BSD-3-Clause | Nicolas Thill | packages:pkgdata_owrt18_6:drill, Bug reports | packages:pkgdata_owrt18_6:drill, Sources |
| network---ip-addresses-and-names | kea-admin | 1.6.2-1 | libc, kea-libs | A useful tool for database backend maintenance (creating a new database, checking versions, upgrading etc.). | 7kB | 6kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-ctrl | 1.6.2-1 | libc, procps-ng, procps-ng-ps, kea-dhcp4, kea-dhcp6, kea-dhcp-ddns | Tool to start, stop, reconfigure, and report status for the Kea servers. | 95kB | 94kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-dhcp-ddns | 1.6.2-1 | libc, kea-libs | The DHCP Dynamic DNS process. This process acts as an intermediary between the DHCP servers and DNS servers. It receives name update requests from the DHCP servers and sends DNS Update messages to the DNS servers. | 146kB | 145kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-dhcp4 | 1.6.2-1 | libc, kea-libs | The DHCPv4 server process. This process responds to DHCPv4 queries from clients. | 250kB | 250kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-dhcp6 | 1.6.2-1 | libc, libssp, kea-libs | The DHCPv6 server process. This process responds to DHCPv6 queries from clients. | 269kB | 269kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-lfc | 1.6.2-1 | libc, libssp, kea-libs | This process removes redundant information from the files used to provide persistent storage for the memfile data base backend. While it can be run standalone, it is normally run as and when required by the Kea DHCP servers. | 50kB | 50kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-libs | 1.6.2-1 | libc, libssp, libopenssl1.1, log4cplus, boost, boost-system | Kea required Libraries. | 2383kB | 2397kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-perfdhcp | 1.6.2-1 | libc, libssp, kea-libs | A DHCP benchmarking tool which simulates multiple clients to test both DHCPv4 and DHCPv6 server performance. | 136kB | 136kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | unbound-anchor | 1.6.8-2 | libc, libssp, libopenssl, unbound, libexpat | This package contains the Unbound anchor utility. | 21kB | 20kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | unbound-control-setup | 1.6.8-2 | libc, libssp, libopenssl, unbound-control, openssl-util | This package contains the Unbound control setup utility. | 3kB | 2kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | unbound-control | 1.6.8-2 | libc, libssp, libopenssl, unbound | This package contains the Unbound control utility. | 41kB | 41kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | unbound-host | 1.6.8-2 | libc, libssp, libopenssl, libunbound | This package contains the Unbound DNS lookup utility. | 33kB | 33kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | unbound | 1.6.8-2 | libc, libssp, libopenssl, libunbound | This package contains the Unbound daemon. | 140kB | 141kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | overture | 1.7-1 | libc | Overture is a DNS server/forwarder/dispatcher written in Go. | 2811kB | 2817kB | MIT | Richard Yu | Bug reports | Sources |
| network---ip-addresses-and-names | drill | 1.7.0-5 | libc, libssp, libopenssl1.1, libldns | drill is a tool to designed to get all sorts of information out of the DNS. It is specificly designed to be used with DNSSEC. | 21kB | 20kB | BSD-3-Clause | common packages maintainers | Bug reports | Sources |
| network---ip-addresses-and-names | dnsdist | 1.7.2-3 | libc, libh2o-evloop, libnghttp2-14, libopenssl1.1, libnetsnmp, re2-6, libfstrm, libsodium, libatomic1, libcap, libedit, libstdcpp6, lmdb, luajit, tinycdb1 | dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life is to route traffic to the best server, delivering top performance to legitimate users while shunting or blocking abusive traffic. | 1867kB | 1873kB | GPL-2.0-only | Peter van Dijk | Bug reports | Sources |
| network---ip-addresses-and-names | dnsdist | 1.7.2-3 | libc, libh2o-evloop, libnghttp2-14, libopenssl1.1, libnetsnmp, re2-6, libfstrm, libsodium, libatomic1, libcap, libedit, libstdcpp6, lmdb, luajit, tinycdb1 | packages:pkgdata:dnsdist, dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life is to route traffic to the best server, delivering top performance to legitimate users while shunting or blocking abusive traffic. | 1867kB | 1873kB | GPL-2.0-only | Peter van Dijk | packages:pkgdata:dnsdist, Bug reports | packages:pkgdata:dnsdist, Sources |
| network---ip-addresses-and-names | kea-dhcp4 | 1.8.0-2 | libc, kea-libs | The DHCPv4 server process. This process responds to DHCPv4 queries from clients. | 275kB | 275kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-dhcp6 | 1.8.0-2 | libc, kea-libs | The DHCPv6 server process. This process responds to DHCPv6 queries from clients. | 274kB | 274kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-admin | 1.8.0-2 | libc, kea-libs | A useful tool for database backend maintenance (creating a new database, checking versions, upgrading etc.). | 7kB | 6kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-dhcp-ddns | 1.8.0-2 | libc, kea-libs | The DHCP Dynamic DNS process. This process acts as an intermediary between the DHCP servers and DNS servers. It receives name update requests from the DHCP servers and sends DNS Update messages to the DNS servers. | 151kB | 150kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-ctrl | 1.8.0-2 | libc, procps-ng, procps-ng-ps, kea-dhcp4, kea-dhcp6, kea-dhcp-ddns | Tool to start, stop, reconfigure, and report status for the Kea servers. | 97kB | 96kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-lfc | 1.8.0-2 | libc, kea-libs | This process removes redundant information from the files used to provide persistent storage for the memfile data base backend. While it can be run standalone, it is normally run as and when required by the Kea DHCP servers. | 49kB | 48kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-libs | 1.8.0-2 | libc, libopenssl1.1, log4cplus, boost, boost-system | Kea required Libraries. | 2474kB | 2481kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-perfdhcp | 1.8.0-2 | libc, kea-libs | A DHCP benchmarking tool which simulates multiple clients to test both DHCPv4 and DHCPv6 server performance. | 133kB | 132kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-shell | 1.8.0-2 | libc, kea-libs | This simple text client uses the REST interface to connect to the Kea Control Agent. | 2kB | 1kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | drill | 1.8.1-1 | libc, libopenssl1.1, libldns | ldns includes the drill tool, which is much like dig from BIND. It was designed with DNSSEC in mind and should be a useful debugging/query tool for DNSSEC. | 23kB | 23kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | unbound | 1.8.1-1 | libc, libopenssl, libunbound | This package contains the Unbound daemon. | 158kB | 158kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | ldns-examples | 1.8.1-1 | libc, libopenssl1.1, libldns, libpcap1, drill | A few example programs are included in the source of ldns. They include tools which can create DNSSEC keys and DNSSEC zone files. | 109kB | 109kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | drill | 1.8.1-1 | libc, librt, libpthread, libopenssl1.1, libldns | ldns includes the drill tool, which is much like dig from BIND. It was designed with DNSSEC in mind and should be a useful debugging/query tool for DNSSEC. | 23kB | 22kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | ldns-examples | 1.8.1-1 | libc, libopenssl1.1, libldns, libpcap1, drill | A few example programs are included in the source of ldns. They include tools which can create DNSSEC keys and DNSSEC zone files. | 110kB | 110kB | BSD-3-Clause | Eric Luehrsen | Bug reports | Sources |
| network---ip-addresses-and-names | ldns-examples | 1.8.1-1 | libc, libopenssl1.1, libldns, libpcap1, drill | packages:pkgdata:ldns-examples, A few example programs are included in the source of ldns. They include tools which can create DNSSEC keys and DNSSEC zone files. | 109kB | 109kB | BSD-3-Clause | Eric Luehrsen | packages:pkgdata:ldns-examples, Bug reports | packages:pkgdata:ldns-examples, Sources |
| network---ip-addresses-and-names | drill | 1.8.1-1 | libc, libopenssl1.1, libldns | packages:pkgdata:drill, ldns includes the drill tool, which is much like dig from BIND. It was designed with DNSSEC in mind and should be a useful debugging/query tool for DNSSEC. | 23kB | 23kB | BSD-3-Clause | Eric Luehrsen | packages:pkgdata:drill, Bug reports | packages:pkgdata:drill, Sources |
| network---ip-addresses-and-names | kea-ctrl | 1.8.2-8 | libc, procps-ng, procps-ng-ps, kea-dhcp4, kea-dhcp6, kea-dhcp-ddns | Tool to start, stop, reconfigure, and report status for the Kea servers. | 91kB | 90kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-dhcp-ddns | 1.8.2-8 | libc, librt, libpthread, kea-libs | The DHCP Dynamic DNS process. This process acts as an intermediary between the DHCP servers and DNS servers. It receives name update requests from the DHCP servers and sends DNS Update messages to the DNS servers. | 154kB | 154kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-dhcp4 | 1.8.2-8 | libc, kea-libs | The DHCPv4 server process. This process responds to DHCPv4 queries from clients. | 266kB | 266kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-dhcp6 | 1.8.2-8 | libc, kea-libs | The DHCPv6 server process. This process responds to DHCPv6 queries from clients. | 265kB | 265kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-perfdhcp | 1.8.2-8 | libc, kea-libs | A DHCP benchmarking tool which simulates multiple clients to test both DHCPv4 and DHCPv6 server performance. | 118kB | 118kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-lfc | 1.8.2-8 | libc, kea-libs | This process removes redundant information from the files used to provide persistent storage for the memfile data base backend. While it can be run standalone, it is normally run as and when required by the Kea DHCP servers. | 41kB | 40kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-admin | 1.8.2-8 | libc, librt, libpthread, kea-libs | A useful tool for database backend maintenance (creating a new database, checking versions, upgrading etc.). | 7kB | 6kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-libs | 1.8.2-8 | libc, libopenssl1.1, log4cplus, boost, boost-system | Kea required Libraries. | 2250kB | 2267kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-shell | 1.8.2-8 | libc, kea-libs | This simple text client uses the REST interface to connect to the Kea Control Agent. | 2kB | 1kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-hook-ha | 1.8.2-8 | libc, librt, libpthread, kea-libs, kea-hook-lease-cmds | The high availability hook library. | 133kB | 133kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-uci | 1.8.2-8 | libc, librt, libpthread | Kea PROCD/UCI support. This package installs a UCI config file and a PROCD service file. | 1kB | 0kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| network---ip-addresses-and-names | kea-hook-lease-cmds | 1.8.2-8 | libc, kea-libs | The lease commands hook library. | 64kB | 63kB | MPL-2.0 | BangLang Huang, Rosy Song, | Bug reports | Sources |
| Previous page Next page | ||||||||||