This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='network---vpn'

类别名称版本依赖包描述信息软件包体积 安装后大小授权方式维护人报告错误源代码
network---vpnstrongswan-mod-gcrypt5.9.5-13.1libc, strongswan, libgcryptStrongSwan libgcrypt plugin

13kB12kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-scepclient5.9.5-13.1libc, strongswanStrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains the SCEP client.

13kB12kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-scepclient5.6.3-3libc, strongswanStrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains the SCEP client.

12kB12kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-load-tester5.6.3-3libc, strongswanStrongSwan load testing plugin

13kB12kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-gmpdh5.8.2-2libc, libssp, strongswanStrongSwan DH-Groups; no libgmp dep plugin

13kB12kBGPL-2.0-or-laterStijn TintelBug reportsSources
network---vpnstrongswan-scepclient5.8.2-2libc, strongswanStrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains the SCEP client.

12kB12kBGPL-2.0-or-laterStijn TintelBug reportsSources
network---vpnstrongswan-scepclient5.9.2-2libc, librt, libpthread, strongswanStrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains the SCEP client.

12kB12kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-mod-load-tester5.9.5-13.1libc, strongswanStrongSwan load testing plugin

14kB13kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-mod-gmpdh5.9.2-2libc, librt, libpthread, strongswanStrongSwan DH-Groups; no libgmp dep plugin

14kB13kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan5.9.2-2libc, librt, libpthread, ip, kmod-crypto-authenc, kmod-ipsec, kmod-ipsec4, kmod-ipsec6, kmod-ipt-ipsec, iptables-mod-ipsecStrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains shared libraries and scripts.

131kB131kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-mod-aes5.5.3-1libc, strongswanStrongSwan AES crypto plugin

15kB14kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-aes5.8.2-2libc, strongswanStrongSwan AES crypto plugin

15kB14kBGPL-2.0-or-laterStijn TintelBug reportsSources
network---vpnstrongswan5.6.3-3libc, libpthread, ip, kmod-crypto-authenc, kmod-ipsec, kmod-ipsec4, kmod-ipsec6, kmod-ipt-ipsec, iptables-mod-ipsecStrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains shared libraries and scripts.

143kB143kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnocserv0.12.4-1libc, libssp, libhttp-parser, libgnutls, certtool, libncurses, libreadline, libprotobuf-c, libev, kmod-tunOpenConnect server (ocserv) is an SSL VPN server. Its purpose is to be
a secure, small, fast and configurable VPN server. It implements the
OpenConnect SSL VPN protocol, and has also (currently experimental)
compatibility with clients using the AnyConnect SSL VPN protocol. The
OpenConnect VPN protocol uses the standard IETF security protocols such
as TLS 1.2, and Datagram TLS to provide the secure VPN service.

147kB147kBGPLv2+Nikos MavrogiannopoulosBug reportsSources
network---vpnopenconnect9.01-1libc, librt, libpthread, libxml2, kmod-tun, resolveip, vpnc-scripts, libgnutls, libtasn1A VPN client compatible with several SSL VPN implementations (ocserv, Cisco AnyConnect, Juniper, Palo Alto)

OpenConnect is an SSL VPN client initially created to support Cisco's
AnyConnect SSL VPN. It has since been extended to support the Pulse Connect
Secure VPN (formerly known as Juniper Network Connect or Junos Pulse) and
the Palo Alto Networks GlobalProtect SSL VPN.

A corresponding OpenConnect VPN server implementation can be found in the
ocserv package.

150kB149kBLGPL-2.1-or-laterNikos MavrogiannopoulosBug reportsSources
network---vpnstrongswan5.8.2-2libc, libpthread, ip, kmod-crypto-authenc, kmod-ipsec, kmod-ipsec4, kmod-ipsec6, kmod-ipt-ipsec, iptables-mod-ipsecStrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains shared libraries and scripts.

150kB149kBGPL-2.0-or-laterStijn TintelBug reportsSources
network---vpnstrongswan-mod-attr-sql5.5.3-1libc, libssp, strongswan, strongswan-charonStrongSwan SQL based config plugin

16kB15kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnuanytun-nocrypt0.3.5-1libc, libssp, kmod-tunuAnytun is a tiny implementation of SATP the secure anycast tunneling protocol.
SATP defines a protocol used for communication between any combination of
unicast and anycast tunnel endpoints. It has less protocol overhead than
IPSec in Tunnel mode and allows tunneling of every ETHER TYPE protocol (e.g.
ethernet, ip, arp ...). SATP directly includes cryptography and message
authentication based on the methods used by SRTP. It is intended to deliver
a generic, scalable and secure solution for tunneling and relaying of packets
of any protocol.
Unlike Anytun which is a full featured implementation uAnytun has no support
for multiple connections or synchronisation. It is a small single threaded
implementation intended to act as a client on small platforms.

16kB15kBGPL-3.0+Christian PointnerBug reportsSources
network---vpnstrongswan-mod-aes5.9.5-13.1libc, strongswanStrongSwan AES crypto plugin

15kB15kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-mod-aes5.6.3-3libc, libssp, strongswanStrongSwan AES crypto plugin

16kB15kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnuanytun-nocrypt0.3.5-2libc, libssp, kmod-tunuAnytun is a tiny implementation of SATP the secure anycast tunneling protocol.
SATP defines a protocol used for communication between any combination of
unicast and anycast tunnel endpoints. It has less protocol overhead than
IPSec in Tunnel mode and allows tunneling of every ETHER TYPE protocol (e.g.
ethernet, ip, arp ...). SATP directly includes cryptography and message
authentication based on the methods used by SRTP. It is intended to deliver
a generic, scalable and secure solution for tunneling and relaying of packets
of any protocol.
Unlike Anytun which is a full featured implementation uAnytun has no support
for multiple connections or synchronisation. It is a small single threaded
implementation intended to act as a client on small platforms.

16kB15kBGPL-3.0+Christian PointnerBug reportsSources
network---vpnstrongswan-mod-attr-sql5.8.2-2libc, libssp, strongswan, strongswan-charonStrongSwan SQL based config plugin

16kB15kBGPL-2.0-or-laterStijn TintelBug reportsSources
network---vpnuanytun-nocrypt0.3.7-2libc, libssp, kmod-tunuAnytun is a tiny implementation of SATP the secure anycast tunneling protocol.
SATP defines a protocol used for communication between any combination of
unicast and anycast tunnel endpoints. It has less protocol overhead than
IPSec in Tunnel mode and allows tunneling of every ETHER TYPE protocol (e.g.
ethernet, ip, arp ...). SATP directly includes cryptography and message
authentication based on the methods used by SRTP. It is intended to deliver
a generic, scalable and secure solution for tunneling and relaying of packets
of any protocol.
Unlike Anytun which is a full featured implementation uAnytun has no support
for multiple connections or synchronisation. It is a small single threaded
implementation intended to act as a client on small platforms.

16kB15kBGPL-3.0-or-laterChristian PointnerBug reportsSources
network---vpnstrongswan-mod-kernel-libipsec5.5.3-1libc, libssp, strongswanStrongSwan libipsec kernel interface plugin

16kB16kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-attr-sql5.9.5-13.1libc, librt, libpthread, strongswan, strongswan-charonStrongSwan SQL based config plugin

17kB16kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-mod-kernel-libipsec5.9.5-13.1libc, librt, libpthread, strongswanStrongSwan libipsec kernel interface plugin

17kB16kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnopenvpn-easy-rsa3.0.4-1libc, libssp, openssl-utilCLI utility to build and manage a PKI CA.

17kB16kBGPL-2.0OpenWrt teamBug reportsSources
network---vpnopenvpn-easy-rsa3.0.4-1libc, libssp, openssl-utilCLI utility to build and manage a PKI CA.

17kB16kBGPL-2.0OpenWrt teamBug reportsSources
network---vpnstrongswan-mod-attr-sql5.6.3-3libc, strongswan, strongswan-charonStrongSwan SQL based config plugin

17kB16kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-aes5.9.2-2libc, librt, libpthread, strongswanStrongSwan AES crypto plugin

16kB16kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnopenvpn-mbedtls2.4.4-4libc, libssp, kmod-tun, liblzo, libmbedtlsOpen source VPN solution using mbedTLS

161kB160kBGPL-2.0Felix FietkauBug reportsSources
network---vpnopenconnect8.20-1libc, libxml2, kmod-tun, resolveip, vpnc-scripts, libgnutls, libtasn1A VPN client compatible with several SSL VPN implementations (ocserv, Cisco AnyConnect, Juniper, Palo Alto)

OpenConnect is an SSL VPN client initially created to support Cisco's
AnyConnect SSL VPN. It has since been extended to support the Pulse Connect
Secure VPN (formerly known as Juniper Network Connect or Junos Pulse) and
the Palo Alto Networks GlobalProtect SSL VPN.

A corresponding OpenConnect VPN server implementation can be found in the
ocserv package.

162kB161kBLGPL-2.1-or-laterNikos MavrogiannopoulosBug reportsSources
network---vpnopenvpn-openssl2.4.5-4.2libc, libssp, kmod-tun, liblzo, libopensslOpen source VPN solution using OpenSSL

163kB162kBGPL-2.0Felix FietkauBug reportsSources
network---vpnstrongswan-mod-gmpdh5.5.3-1libc, strongswanStrongSwan DH-Groups; no libgmp dep plugin

18kB17kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-ha5.5.3-1libc, libssp, strongswanStrongSwan high availability cluster plugin

18kB17kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-gmpdh5.6.3-3libc, strongswanStrongSwan DH-Groups; no libgmp dep plugin

18kB17kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-ha5.6.3-3libc, libssp, strongswanStrongSwan high availability cluster plugin

18kB17kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-wolfssl5.9.5-13.1libc, strongswan, libwolfssl5.6.4.ee39414eStrongSwan WolfSSL crypto plugin

18kB17kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-mod-attr-sql5.9.2-2libc, librt, libpthread, strongswan, strongswan-charonStrongSwan SQL based config plugin

17kB17kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-mod-kernel-libipsec5.9.2-2libc, librt, libpthread, strongswanStrongSwan libipsec kernel interface plugin

17kB17kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan5.9.5-13.1libc, libpthread, ip, kmod-crypto-authenc, kmod-ipsec, kmod-ipsec4, kmod-ipsec6StrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains shared libraries and scripts.

172kB172kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan5.9.5-13.1libc, libpthread, ip, kmod-crypto-authenc, kmod-ipsec, kmod-ipsec4, kmod-ipsec6packages:pkgdata:strongswan, StrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains shared libraries and scripts.

172kB172kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,packages:pkgdata:strongswan, Bug reportspackages:pkgdata:strongswan, Sources
network---vpnopenvpn-mbedtls2.4.5-4.2libc, kmod-tun, liblzo, libmbedtlsOpen source VPN solution using mbedTLS

175kB175kBGPL-2.0Felix FietkauBug reportsSources
network---vpnstrongswan-charon5.6.3-3libc, libssp, strongswanStrongSwan is an OpenSource IPsec implementation for the Linux operating system.
This package contains charon, an IKEv2 keying daemon.

178kB177kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnopenvpn-mbedtls2.4.11-1libc, kmod-tun, liblzo2, libmbedtls12Open source VPN solution using mbedTLS

178kB178kBGPL-2.0Felix FietkauBug reportsSources
network---vpnstrongswan-mod-kernel-libipsec5.6.3-3libc, strongswanStrongSwan libipsec kernel interface plugin

18kB18kBGPL-2.0+Stijn TintelBug reportsSources
network---vpnstrongswan-mod-kernel-libipsec5.8.2-2libc, strongswanStrongSwan libipsec kernel interface plugin

18kB18kBGPL-2.0-or-laterStijn TintelBug reportsSources
network---vpnstrongswan-mod-bliss5.9.5-13.1libc, strongswan, strongswan-libnttfft, strongswan-mod-mgf1, strongswan-mod-hmacStrongSwan BLISS crypto plugin

19kB18kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnstrongswan-mod-ha5.9.2-2libc, librt, libpthread, strongswanStrongSwan high availability cluster plugin

19kB18kBGPL-2.0-or-laterPhilip Prindeville, Noel Kuntze,Bug reportsSources
network---vpnopenvpn-openssl2.4.4-4libc, kmod-tun, liblzo, libopensslOpen source VPN solution using OpenSSL

180kB180kBGPL-2.0Felix FietkauBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy