软件包列表
软件包分类
点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。
软件包列表
为了不影响您的体验,每页只显示50个软件包。
- 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
- 点击表头可对按对应字段对内容进行排序。
- 在
反白框输入您的筛选条件。
当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。
Filtered by categories='network'
| 类别 | 名称 | 版本 | 依赖包 | 描述信息 | 软件包体积 | ↓ 安装后大小 | 授权方式 | 维护人 | 报告错误 | 源代码 |
|---|---|---|---|---|---|---|---|---|---|---|
| network | gnunet-gns-sqlite | 0.10.2-git-20170111-a..b-1 | libc, gnunet, libsqlite3, gnunet-gns | GNUnet libsqlite3 gns plugins | 11kB | 10kB | GPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | usbip-client | 2.0-5 | libc, usbip, kmod-usbip-client | USB-over-IP (client) | 10kB | 10kB | GPL-2.0 | Nuno Goncalves | Bug reports | Sources |
| network | bwm-ng | 0.6.3-1 | libc | Bandwidth Monitor NG is a small and simple console-based live network and disk io bandwidth monitor. | 11kB | 10kB | GPL2-2.0 | Julen Landa Alustiza | Bug reports | Sources |
| network | daemonlogger | 1.2.1-1 | libc, libpcap1, libdnet | Software Network Tap | 10kB | 10kB | GPL-2.0 | Mirko Vogt | Bug reports | Sources |
| network | gnunet-dht-cli | 0.17.5-4 | libc, gnunet | GNUnet DHT command line clients | 10kB | 10kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-fs-sqlite | 0.17.5-4 | libc, gnunet, gnunet-datastore, gnunet-sqlite | GNUnet libsqlite3 filesharing plugin | 10kB | 10kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-gns-sqlite | 0.17.5-4 | libc, gnunet, gnunet-gns, gnunet-sqlite | GNUnet libsqlite3 gns plugins | 11kB | 10kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-social-mysql | 0.10.2-git-20180205-b..7-1 | libc, gnunet, gnunet-mysql, gnunet-social | GNUnet mySQL social plugins | 11kB | 10kB | GPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-social-sqlite | 0.10.2-git-20180205-b..7-1 | libc, gnunet, gnunet-social, gnunet-sqlite | GNUnet libsqlite3 social plugins | 11kB | 10kB | GPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | ifstat | 1.1-3 | libc, libnetsnmp | ifstat is a tool to report network interfaces bandwidth just like vmstat/iostat do for other system counters. It can monitor local interfaces by polling the kernel counters, or remote hosts interfaces using SNMP. | 11kB | 10kB | GPL-2.0 | Nikil Mehta | Bug reports | Sources |
| network | mac-telnet-server | 2015-09-02-37d83cbc-2 | libc, librt, libpthread, libubox20220515 | Open source MAC Telnet client and server utilities for connecting to Mikrotik RouterOS routers and Linux machines via MAC address. | 11kB | 10kB | GPL-2.0-or-later | Jo-Philipp Wich | Bug reports | Sources |
| network | nut-upsrw | 2.7.4-27 | libc, librt, libpthread, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsrw allows you to view and change the read/write variables inside your UPS. It sends commands via the upsd to your driver, which configures the hardware for you. The list of variables that allow you to change their values is based on the capabilities of your UPS equipment. Not all models support this feature. Typically, cheaper hardware does not support any of them. | 11kB | 10kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | ppp-mod-pppoe | 2.4.9.git-2021-01-04-3 | libc, kmod-pppoe | This package contains a PPPoE (PPP over Ethernet) plugin for ppp. | 11kB | 10kB | BSD-4-Clause | Felix Fietkau | Bug reports | Sources |
| network | snmpd | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP agent, dynamically linked. | 11kB | 10kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | usbip-client | 2.0-14 | libc, librt, libpthread, usbip, kmod-usbip-client | USB-over-IP (client) | 11kB | 10kB | GPL-2.0-only | Nuno Goncalves | Bug reports | Sources |
| network | adblock | 3.5.5-4 | libc, jshn, jsonfilter | Powerful adblock script to block ad/abuse domains via dnsmasq, unbound, named, kresd or dnscrypt-proxy. The script supports many domain blacklist sites plus manual black- and whitelist overrides. Please see https://github.com/openwrt/packages/blob/master/net/adblock/files/README.md for further information. | 11kB | 10kB | GPL-3.0+ | Dirk Brenken | Bug reports | Sources |
| network | gnunet-gns-sqlite | 0.11.0-1 | libc, gnunet, gnunet-gns, gnunet-sqlite | GNUnet libsqlite3 gns plugins | 10kB | 10kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | https-dns-proxy | 2019-12-03-3 | libc, libssp, libcares, libcurl, libev, ca-bundle | DNS Over HTTPS Proxy | 11kB | 10kB | MIT | Stan Grishin | Bug reports | Sources |
| network | nbd | 3.16.2-1 | libc, kmod-nbd | This package contains the network block device client. | 11kB | 10kB | GPL-2.0+ | Marcin Jurkowski | Bug reports | Sources |
| network | nut-upssched | 2.7.4-11 | libc, libssp, nut, nut-common, nut-upsmon | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upssched was created to allow users to execute programs at times relative to events being monitored by upsmon. The original purpose was to allow for a shutdown to occur after some fixed period on battery, but there are other uses that are possible. You can alternatively write your own script and save some space. | 11kB | 10kB | GPL-2.0 | Daniel Dickinson | Bug reports | Sources |
| network | snmpd | 5.7.3-10 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP agent, dynamically linked. | 10kB | 10kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | usbip-client | 2.0-10 | libc, libssp, usbip, kmod-usbip-client | USB-over-IP (client) | 11kB | 10kB | GPL-2.0 | Nuno Goncalves | Bug reports | Sources |
| network | bwm-ng | 0.6.1-1 | libc, libssp | Bandwidth Monitor NG is a small and simple console-based live network and disk io bandwidth monitor. | 11kB | 10kB | GPL2-2.0 | Julen Landa Alustiza | Bug reports | Sources |
| network | gnunet-gns-sqlite | 0.11.5-2 | libc, libssp, gnunet, gnunet-gns, gnunet-sqlite | GNUnet libsqlite3 gns plugins | 11kB | 10kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-secushare-sqlite | 20190228-81939cb9-3 | libc, gnunet, gnunet-secushare, gnunet-sqlite | GNUnet Secushare (SQLite) | 11kB | 10kB | GPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | mac-telnet-server | 2015-09-02-37d83cbc-2 | libc, libssp, libubox20191228 | Open source MAC Telnet client and server utilities for connecting to Mikrotik RouterOS routers and Linux machines via MAC address. | 11kB | 10kB | GPL-2.0-or-later | Jo-Philipp Wich | Bug reports | Sources |
| network | nbd | 3.19-2 | libc, libssp, kmod-nbd | This package contains the network block device client. | 11kB | 10kB | GPL-2.0-or-later | Marcin Jurkowski | Bug reports | Sources |
| network | snmpd | 5.8-2 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP agent, dynamically linked. | 11kB | 10kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | ifstat | 1.1-3 | libc, libnetsnmp | ifstat is a tool to report network interfaces bandwidth just like vmstat/iostat do for other system counters. It can monitor local interfaces by polling the kernel counters, or remote hosts interfaces using SNMP. | 11kB | 10kB | GPL-2.0 | Nikil Mehta | Bug reports | Sources |
| network | nut-upsrw | 2.7.4-22 | libc, librt, libpthread, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsrw allows you to view and change the read/write variables inside your UPS. It sends commands via the upsd to your driver, which configures the hardware for you. The list of variables that allow you to change their values is based on the capabilities of your UPS equipment. Not all models support this feature. Typically, cheaper hardware does not support any of them. | 12kB | 10kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | phantap | 2021.08.22-26bd8768-1 | libc, librt, libpthread, ebtables, libpcap1, libnl-tiny1, ip-full, kmod-br-netfilter, kmod-ebtables-ipv4 | PhanTap or Phantom tap is a small set of scripts and C code that allow you to setup a network tap that automatically impersonate a victim device, allowing you to access internet using the IP & MAC of the victim. | 11kB | 10kB | GPL-3.0-only | Diana Dragusin, Etienne Champetier, | Bug reports | Sources |
| network | ifstat | 1.1-3 | libc, libnetsnmp | packages:pkgdata:ifstat, ifstat is a tool to report network interfaces bandwidth just like vmstat/iostat do for other system counters. It can monitor local interfaces by polling the kernel counters, or remote hosts interfaces using SNMP. | 11kB | 10kB | GPL-2.0 | Nikil Mehta | packages:pkgdata:ifstat, Bug reports | packages:pkgdata:ifstat, Sources |
| network | bwm-ng | 0.6.3-1 | libc | packages:pkgdata:bwm-ng, Bandwidth Monitor NG is a small and simple console-based live network and disk io bandwidth monitor. | 11kB | 10kB | GPL2-2.0 | Julen Landa Alustiza | packages:pkgdata:bwm-ng, Bug reports | packages:pkgdata:bwm-ng, Sources |
| network | daemonlogger | 1.2.1-1 | libc, libpcap1, libdnet | packages:pkgdata:daemonlogger, Software Network Tap | 10kB | 10kB | GPL-2.0 | Mirko Vogt | packages:pkgdata:daemonlogger, Bug reports | packages:pkgdata:daemonlogger, Sources |
| network | gnunet-gns-sqlite | 0.17.5-4 | libc, gnunet, gnunet-gns, gnunet-sqlite | packages:pkgdata:gnunet-gns-sqlite, GNUnet libsqlite3 gns plugins | 11kB | 10kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-gns-sqlite, Bug reports | packages:pkgdata:gnunet-gns-sqlite, Sources |
| network | gnunet-dht-cli | 0.17.5-4 | libc, gnunet | packages:pkgdata:gnunet-dht-cli, GNUnet DHT command line clients | 10kB | 10kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-dht-cli, Bug reports | packages:pkgdata:gnunet-dht-cli, Sources |
| network | gnunet-fs-sqlite | 0.17.5-4 | libc, gnunet, gnunet-datastore, gnunet-sqlite | packages:pkgdata:gnunet-fs-sqlite, GNUnet libsqlite3 filesharing plugin | 10kB | 10kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-fs-sqlite, Bug reports | packages:pkgdata:gnunet-fs-sqlite, Sources |
| network | hnetd-nossl | 2018-12-21-c4376661-1 | libc, odhcpd, odhcp6c, netifd | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 101kB | 100kB | GPL-2.0-only | Steven Barth | Bug reports | Sources |
| network | mosquitto-nossl | 2.0.17-1 | libc, librt | Mosquitto is an open source (BSD licensed) message broker that implements the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight method of carrying out messaging using a publish/subscribe model. This package also includes some basic support for configuring via UCI This package is built WITHOUT SSL support. | 101kB | 100kB | EPL-2.0 | Karl Palsson | Bug reports | Sources |
| network | samba4-client | 4.14.12-2 | libc, samba4-libs | installs: cifsdd smbclient smbget The smbclient program implements a simple ftp-like client for accessing SMB shares | 101kB | 100kB | GPL-3.0-only | Andy Walsh | Bug reports | Sources |
| network | bpftool-full | 5.10.10-2 | libc, librt, libpthread, libelf1, libbfd, libopcodes | A tool for inspection and simple manipulation of eBPF programs and maps. This full version uses libbfd and libopcodes to support disassembly of eBPF programs and jited code. | 100kB | 100kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | hnetd-nossl | 2018-12-21-c4376661-1 | libc, odhcpd, odhcp6c, netifd | packages:pkgdata:hnetd-nossl, This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 101kB | 100kB | GPL-2.0-only | Steven Barth | packages:pkgdata:hnetd-nossl, Bug reports | packages:pkgdata:hnetd-nossl, Sources |
| network | git-lfs | 2.13.2-1 | libc, git | Git Large File Storage (LFS) replaces large files such as audio samples, videos, datasets, and graphics with text pointers inside Git, while storing the file contents on a remote server like GitHub.com or GitHub Enterprise. | 10020kB | 10043kB | MIT | Jan Pavlinec | Bug reports | Sources |
| network | hnetd-openssl | 2018-12-21-c4376661-1 | libc, odhcpd, odhcp6c, netifd, libopenssl1.1 | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 101kB | 101kB | GPL-2.0-only | Steven Barth | Bug reports | Sources |
| network | scapy-src | 2.4.4-1 | libc, librt, libpthread | Scapy is a powerful interactive packet manipulation program built on top of the Python interpreter. It can be used to forge or decode packets of a wide number of protocols, send them over the wire, capture them, match requests and replies, and much more. This package contains the Python source files for scapy. | 999kB | 1011kB | GPL-2.0-only | W. Michael Petullo | Bug reports | Sources |
| network | golang-github-nextdns-nextdns-dev | 1.37.2-1 | libc, ca-bundle | Official NextDNS DNS over HTTPS Proxy. This package provides the source files for the client/bridge program. | 103kB | 102kB | MIT | Olivier Poitrey | Bug reports | Sources |
| network | conserver | 8.2.4-1 | libc, libopenssl1.1 | Conserver is an application that allows multiple users to watch a serial console at the same time. It can log the data, allows users to take write-access of a console (one at a time), and has a variety of bells and whistles to accentuate that basic functionality. The idea is that conserver will log all your serial traffic so you can go back and review why something crashed, look at changes (if done on the console), or tie the console logs into a monitoring system (just watch the logfiles it creates). With multi-user capabilities you can work on equipment with others, mentor, train, etc. It also does all that client-server stuff so that, assuming you have a network connection, you can interact with any of the equipment from home or wherever. | 103kB | 102kB | BSD-3-Clause | Bjørn Mork | Bug reports | Sources |
| network | spoofer | 1.4.6-1 | libc, librt, libpthread, protobuf-lite, libpcap1, libopenssl1.1 | The spoofer client is part of a system to measure the Internet's resistance to packets with a spoofed (forged) source IP address. This package comes bundled with small certificate files that allow secure communication with the spoofer server without depending on the large ca-certificates package. But if the server's private certificate ever changes, it will be necessary to either install the ca-certificates package or install an updated version of this package that has a newer bundled certificate. | 103kB | 102kB | GPL-3.0-or-later | Ken Keys | Bug reports | Sources |
| network | gnunet-gns | 0.10.2-git-20170111-a..b-1 | libc, gnunet, gnunet-vpn, iptables-mod-extra | GNUnet name resolution components | 104kB | 104kB | GPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | ppp-multilink | 2.4.7-12 | libc, libssp, kmod-ppp | PPP daemon (with multilink support) | 105kB | 104kB | BSD-4-Clause | Felix Fietkau | Bug reports | Sources |
| Previous page Next page | ||||||||||